PROVN OF REPLACEMENT OF OVERHEAD CONDUCTOR WITH UG CABLE FOR SHIFTING 11KV and 33KV LINE AT CBS BHALRA UNDER GE (I) 873 EWS

Amount

Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, laying of cables etc., and getting out in any type of soil, complete all as specified and directed.

Excavating in trenches, not exceeding 1.5metre wide and exceeding 1.5metre depth but not exceeding 3.0metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.

Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation of poles, stays, laying of cables etc., and getting out as in road surfaces, hardstanding and similar places, complete all as specified and directed.

Sand cushioning to underground cables using new dry river sand laid in trenches 8cm thick below the cable and 15cm thick above the cable after laying and stretching the cable complete, punned to 18cm, complete all as specified and directed Note : Punned thickness of 18cms shall be measured for payment.

Factory made un-reinforced precast concrete cable cover, class HV, type 1, flat, size 300mmx180mmx40mm, complete all as specified & directed.

Factory made un-reinforced precast concrete cable cover, class LV, type 1, flat, size 250mmx150mmx40mm, complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.

Removing excavated soils to a distance exceeding 50m but not exceeding 100m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Cement concrete type C-2 1:3:6(using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete , complete all as specified and directed.

Cement concrete type D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete of poles, complete all as specified and directed.

Cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) as in coping of poles of size 0.60mx0.60mx045m, complete all as specified and directed.

Stay assembly complete with accessories as shown in Electrical Plate No.1 of SSR 2009 Part-I using stay rod of 20 mm dia, stay bow 14 mm dia, 400 mm long, MS Plate of size 300 x 300 mm x 6mm thick, stay GI wire 7/4mm dia, loop type insulator 65x90mm clearance of hole 16mm, stay clamp (Excavation and concrete shall be measured and paid separately) complete all as specified and directed.

Steel tubular swaged poles complete with base plate welded with pole, finial taper plug, bolt, nut and screws as specified type 410 SP-64 (12m long) including one coat of red-oxide zinc chrome primer and two coats of aluminium paint on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with yellow and black paint alternately on external surface above PCC benching including numbering with fluorescent yellow paint and painting with bituminous paint internally complete and externally for portion embedded in PCC, complete all as specified and directed (Earth work, and PCC shall be measured and paid for separately).

Steel tubular swaged poles complete with base plate welded with pole, finial taper plug, bolt, nut and screws as specified type 410 SP-55 (11m long) including one coat of red-oxide zinc chrome primer and two coats of aluminium paint on surfaces exposed to view and making 30cm wide strips (total 5 Nos) with yellow and black paint alternately on external surface above PCC benching including numbering with fluorescent yellow paint and painting with bituminous paint internally complete and externally for portion embedded in PCC, complete all as specified and directed (Earth work, and PCC shall be measured and paid for separately).

Structural steel work as in cross arms, bracings, supports, clamp and back plate fabricated from steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed by Engineer-in-Charge and applying two coats of aluminium paint over one coat of red oxide zinc chrome primer including preparation of surfaces, complete all as specified & directed.

XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 33000 volts (Earthed) grade of size 240 Sqmm 3 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. (Earth work, precast concrete cover and sand cushioning shall be measured and paid for separately).

XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 11000 volts (Earthed) grade of size 120 Sqmm 3 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. (Earth work, precast concrete cover and sand cushioning shall be measured and paid for separately).

XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor rating 1100 volts grade of size 16 Sqmm 4 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. (Earth work, precast concrete cover and sand cushioning shall be measured and paid for separately).

Cable jointing kit for 33 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 33 KV 3 core XLPE armoured aluminium conductor cable of 240 Sqmm including testing and commissioning, complete all as specifed & directed.

Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 11 KV 3 core XLPE armoured aluminium conductor cable of 120 Sqmm including testing and commissioning, complete all as specifed & directed.

Sheet metal enclosure for DBs, SPN 2 Way 240 Volts complete with and including MCB SPN 32 Amps, 240 Volts, 10 KA complete and fixed all as directed by Engr-in-Charge.

Steel pipe galvanised light grade, 100 mm bore laid in trenches or under ground/floor or road of fixed with pole for protection of cable including GI clamps with bolts nuts and washers complete all as specified and directed.

Steel pipe galvanised light grade, 80 mm bore laid in trenches or under ground/floor or road of fixed with pole for protection of cable including GI clamps with bolts nuts and washers complete all as specified and directed.

Dismantling of old unserviceable steel tubular poles of any description in any position, complete all as specified & directed.

Dismantling of cross arms of MS channel or angle iron etc., complete all as specified & directed.

Taking down old stay assembly of any type, shape and size , complete all as specified & directed.

Taking down old insulator of any type, shape & size, complete all as specified & directed.

Dismantling of ACSR conductor of any type & size from over head line or HT/LT poles, complete all as specified & directed.

SWASTIK TRADERS

darshan kumar gandhi

M/S MANJIT SINGH AND SONS

M/S Builders Indias

LUXMI ELECTRONIC WORKS

M/S BALI CONSTRUCTIONS

FANGALIA TRADERS

Bidder Name

M/S BALI CONSTRUCTIONS

SWASTIK TRADERS

FANGALIA TRADERS

LUXMI ELECTRONIC WORKS

M/S MANJIT SINGH AND SONS

M/S Builders Indias

SHARMA TRADERS

darshan kumar gandhi