Production Activity of Horticulture Plantation (Ber, Mango and Anwala etc.) in PMKSY Project Block Reodar

AANWALA GRAFTED, BER

MANGO

थांवला बनाना। कम से कम 50 सेमी अर्द्ध व्‍यास का। सामान्‍य जमीन

AANWALA GRAFTED, BER

MANGO

पौधा रोपण करना।सामान्‍य जमीन

पौधों की निड़ाई गुडाई करना। 15 सेमी गहराई तक तथा 45 सेमी अर्द्ध व्‍यास तक। TWO TIMES IN A YEAR

FYM or Deshi Manure @ 10 Kg per plant

SSP @ 1kg per plant

पौधों को उपलब्‍ध पानी पिलाना (15 लीटर प्रति पौधा)। 20 WATERING PER YEAR

Transportation of plants Nursary to plantation site (above 20 km.)

Supply, Installation, Testing and Commissioning of Drip Irrigation System for various Spacing Drip & for various spacing of dripers/emitters including mains PVC/HDPE pipelines, class-II: 4 to 6 Kg/sqm pressure, of size 50-90 mm diameter, laterals 12mm to 16mm diameter, class II : 2.5 kg/Sqm pressure and emitters for 4/8 LPH discharge with complete assembly including various valves, Screen filter 20-25 Cum/hr/Disc Filter and ventury and manifold, Air release valve 1", NRV 1.5"/2", Bypass Assembly 1.5"x1.5", Control valve 75/63/50mm, Flush valve 63/50mm, Throttle vlave 2", fitttings & accessaries , Specifications as per Annexure IVa to IVg of GOI Operational Guidelines 2021 for PDMC Componenmt of PMKSY. Spacing (5mx5m) For Area 0.20 Ha.

Providing and Fixing of Hydrocyclone fiter of various capacity conforming to IS; 14743, as per PMKSY-MI Operational Guidelines.

Supply, Installation, Testing and Commissioning of Drip SITC of Monoblock motor pump set ISI marked (IS:9079-2002) with TEFC motor, motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011. with Stainless steel Impellor, Stainless steel shaft, Mechanical seal, Single/Three phase ( 240 - 440 V ) permanent split capacitor type (PSC), fitted with thermal overload protection, Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

ग्रिल/गेट आदि में लौहे का कार्य जिसमें सपाट कोनिया, टी तथा नाळीदार (चेनल), को काटना, चढ़ाना तथा लगाना आदि। Display board, Grill Gate item no63

इनामिल पेन्‍ट का लेप करना 3 तह में ताकि इकसार आभा हो जाये (To give even shade) नये कार्य/पुराने कार्य पर सम सरफेस बनाना। नये कार्य पर।

Lettering with black Japan Paint of approved Brand & Manufacture