VIII.11001/Engr/MW/2024-25/06

Amount

Schedule A Part-I: Welcome Maint and Internal/External Painting to 01 x Type-VI Qtr Bldg No D/98 incl periodical services to Retaining Wall

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade. Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing paint surface

(a) Ditto But for Retaining Walls

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coat

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Providing and fixing Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick for Kitchen cup board shutter including Hinge with necessary screws

Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type

Providing and fixing CP door locks of approved quality & make

Dismantling tile work laid in cement mortar including stacking material within 50 metres lead

Providing and laying Glazed Vitrified tiles Matt/Antiskid finish of size Tile 600 x 600 mm of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Supply and fixing of blind for windows approved quality

Schedule A Part-II: Addition/Alteration to Wash Room

Demolishing brick work in cement morter manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in position cement concrete, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 75 mm thick

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Providing and laying Glazed Vitrified tiles Matt/Antiskid finish of size Tile 600 x 600 mm of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses/post etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc.

Providing 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) both sides of brick wall

Fixing only of Pre-coated galvanized iron profile sheet sheathing with two corrugation side lap fixed with screw with washer to roof 0.50mm (fixing with self tapping screws ( PPG Sheet will be issued as free for fixing from CP store)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Finishing with Deluxe Multi surface paint for interiors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,all as per manufacturer's specification and also including the cost of making openings for light fittings,all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum moisture resistant board

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make , 15 mm nominal bore.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge 20 mm dia for Bath room & Toilet

Providing and fixing aluminium work for doors, windows, ventilators with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make ,fixing with dash fasteners of required dia and size, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

Providing and fixing glazing in uPVC/ aluminium , window shutters with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.00 mm thickness

Providing and fixing aluminium Anodized handle

Suppy & fixing LED Ceiling light fittings 6 watts of approved make & sample

Providing and fixing on wall face plasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring 110 mm diameter (ISI Marked)

Ditto but 75 mm dia PVC pipe (ISI Marked)

S.W. gully trap P type 150x100 mm

Schedule A Part-III:Repair/Maint and Replacement of Water Supply Pipeline incl Sanitary Fittings

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 15mm dia having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 20mm dia having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 40mm dia having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Supply and fixing of bib cock CP 15mm dia

Supply and fixing of angle cock CP 15mm dia

Supply and fixing of piller cock CP 15mm dia

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White

Providing and fixing P.V.C. waste pipe 32mm for sink or wash basin including P.V.C. waste fittings complete.

Providing and fixing P.V.C. connection pipe 32mm for flushing cistern or wash basin

Providing and fixing ball valve (brass) 20mm dia of approved quality, High or low pressure, with plastic floats complete :

Providing and fixing gate valve 40mm

Schedule A Part-IV: Repair/Maint of Internal Electrification

Wiring for light point / fan point / exhaust fan point/ call bell point with 1.5 Sqmm FR PVC inuslated copper conductor single core cable in surface / recessed PVC casing and capping with piano switch, phenolic laminated sheet suitable GI/PVC Box and earthing the point with 1.5 Sqmm FR PVC insulated copper conductor single core cable etc as required

Wiring for light/power plug with 2 x 4 Sqmm FR PVC insulated copper conductor single core cable in surface / recessed PVC casing and capping alogwith 1 No 4 Sqmm FR PVC insulated copper conductor single core cable for loop earthing as required plug point - 3 Nos Power Plug Point -01 Nos

Supplying and fixing PVC switch board 7"x4"

Supplying and fixing SS combined 16 amp with PVC switch box

Supplying and fixing following piano switch/ socket on the existing phenolic laminated sheet & switch box including connections as required (a) 5/6 amps switch

(b) 3 pin 5/6 amp socket outlet

(c) 6 pin 15/16 Amps socket outlet

(d) 15/16 amps switch

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator), 6 way

Supply of LED strip light warm white (Make-Orient)

Supply of Adopter for LED strip light warm white, 100 mtr length

Supply of LED bulb 9 watt warm white

M/s AMAR NATH PANWAR

M/S MD HABIBULLAH