CERTAIN B/R REPAIRS / MAINT INCL JOINERY, CEILING, ROOFS, FLOORING, TILING ETC IN OTM ACCN AT FATEHGARH CANT

Amount

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as soecified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specified and directed.

M & L for providing chequered cement concrete tiles of size 25cm x 25cm x 22mm thick set & jointed in neat cement slurry with grey cement and pigment including 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying of chequered tile complete all as specified and directed.

S&F glazed coloured ceramic tiles of sizes 350x 250x 7 mm/ 450X 350X 7mm thick as on vertical surface of skirting / dado over 10mm thick screed in CM 1:4 complete all as specified and directed.

S&F Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm screed bed in CM 1:6 complete all as specified and directed.

S & F Vitrified Ceramic Tiles 10 mm thick (Square / rectangular) light shade polished area of each tiles not exceeding 0.36 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match incl 15 mm thk screed bed in CM 1:6 complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M&L 15mm thick cement plastering in CM 1:6 on brick or concrete surfaces and finished the surfaces even and smooth without using extra cement complete all as specified and directed

All as per item No 10 above but in CM 1: 4 complete all as specified and directed.

M&L 5 mm thick cement plastering in CM 1:3 on on ceiling surfaces and finished the surface even and fair without using extra cement complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm each not exc 4.00 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm complete all as specified and directed.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle complete with glazing bars,dovetailed or welded complete all as specified and directed.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle, complete without glazing bars,dovetailed or welded complete all as specified and directed.

S&F factory made steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

M & L for framed work such as grills etc with ends of bars shouldered and made of square bars fixed to flat iron or to box type window frame confirming to Fe-290 gde E-165. complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S Frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock and bottom rail on either side & as gap insert for tip rail & bottorm rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/seated to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F MS work as in Framed work as in chowkhats of doors or gates of angle or other section with gusset plates, rails, braces, etc.,conforming to Fe.290.Gde-E-165 complete all as specified and directed

S&F factory made 35 mm thick Plain, framed,panelled shutters(any number of panels), with lock rail and panels of timber flat on both sides (feather edged), or of 12 mm veneered particle board medium density, wood particle board with commercial veneering on both faces face veneers: supplied and fitted to chowkats the size of rail and stile as per IS-1003 (Part-I), Klin seasoned and chemically pressure treated with 2nd class hardward rail & stile complete all as specified and directed.

S&F factory made 35 mm th 2nd class hardwood as in Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass etc. sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 125mm complete all as specified and directed.

S & F mild steel sliding door bolt 300mm long clip type, stove enamelled black with bright bolt not less than 16mm dia complete all as specified and directed.

S & F mild steel barrel tower bolt 200mm long, stove enameled black with bright bolts complete all as specified and directed.

S & F mild steel pressed handle oval type stove enameled black of size 150mm complete all as specified and directed.

S&F mild steel butt hinges cold rolled of size 100mm medium weight complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows/wodden doors complete all as specified and directed.

M&L in repair for 0.63 mm Mild steel, plain, black sheet as in steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed.

M&L for MS framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410-W(Gde E- 250) quality A complete, all as specified and directed

S&F for Purpose made butt hinges,sliding bolt,handle conforming to Fe-290 Gde-E-165 suitable for fixing to stone / concrete door and window frames complete all as specified and directed

S & F in repair curtain rod PVC coated mild steel rod 20 mm bore with fixing fancy type brackets, stops, rollers, side dooms etc complete all as specified and directed.

M&L preparing new wooden surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L Preparing new surfaces of steel of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F in repair vireous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe connection to trap and to flushing pipe, anti-syphonage type including making good to floor (excluding flush pipe and flushing cistern) complete all as specified and directed

S&F in repair Vitreous China Wash down water closet EWC (Pedestral pattern) with plastic seat cover,hand shower including all fittings and connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc (excluding flushing cistern) complete all as specified and as directed.

S&F in repair for PVC low level flushing cistern 10 litre capacity, with syphonic, action type PVC float valve, brackets and 32mm bore PVC flush pipe incl PVC connection 450mm long complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tank vertical with closed top of 500ltrs capacity three layered and fixed in position all as specified in SSR Part-I including disconnecting existing tanks complete all as specified and directed

All as per item No.43 above but 1000 Ltr Capacity complete all as specified and directed.

S & F in repair Vitreous China Wash hand basin white flat back of size 550 x 400 mm including brackets, PTMT waste coupling 32mm dia and PVC waste pipe (excluding suppy of pillar trap) complete all as specified and directed.

M & L three coat of white wash on newly plastered wall surfaces including preparation complete all as specified and directed

M & L for two coats of Cement based paint over a coat of white cement primer on newly plastered wall surfaces including preparation complete all as specified and directed.

M & L Two coats of Oil bound distemper on newly plastered wall suerfaces over a coat of white cement primer including preparation of surface complete all as specified and directed.

M & L three coat of white wash on newly plastered Ceiling surfaces including preparation complete all as specified and directed

Dismantaling of asbestos cement (Corrugated, semi corrugated etc) sheeting in roof covering complete all as specified and directed

S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed.

S&F false ceiling with tiles 600 mm x 600 mm x 16 mm manufactured by M/s Armstrong World Industries using hot dipped GI steel section, exposed surface with pre-coated capping, main tee of size 24 mm x 32 mm x 0.27 at every 1.20 m center to center maximum and rotary stitched cross tee of 24 mm x 27 mm x 0.25 mm thickness at 1.20 m center to center and wall angle of size 19 x 19 x 0.35 mm thickness fixed to periphery of the wall. The above gird is suspended GI wire. The FINE FISSURED TEGUALR EDGE, ceiling tiles shall be manufactured by M/S Arm Strong World Industries of size 600 x 600 x 14 mm thick having NRC 0.55, light reflectance of more than 78% (WT), thermal conductivity K= 0.052 - 0.057 W/m0k, humidity resistance of 90% having fire performance class A, surface having factory applied vinyl latex paint with back side sanded and having one coat of white paint over the formed grid complete all as specified and directed. Make :- Everest / Armstrong / Rajshri

M&L for providing "RAJSHRI" PVC SHEET WALL PANELLING of thickness 5 mm (+ 0.25) consisting of panels of desired size struck on inner frame work of 50 mm wide strips of 5 mm (+0.05) thick prelam PVC sheet. The panel & strips shall be sheet of Density 600 Kg/ Cbm manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a groove of 6 mm width and 1 mm depth for sinking the head of the screw used to fix the strips to the wall vertically an equal interval of 10" between two PVC strips. The PVC strips shall be fixed to the wall using 65 mm long MS screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200 mm. A groove of 2 mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5 mm (+0.25) thick PVC sheet of width 75 mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed.