GE/863/EWS-T-47/2019-20

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out hard dense soil complete all as specified and directed by Engr-in-Charge.

Excavation in trenches not exc 1.50M wide and n.exc 1.5m in depth for wells, Manholes & Pier holes in Hard/Dense Soil complete all as specified and dircted by Engr-in-Charge.

dito- as above for each additional 1.5m or part thereof in depth beyond the first 1.5m complete all as specified and dircted by Engr-in-Charge.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L for 2nd class Hard wood as in plain fillets, square, rectangular, traingular in section clean sawn secured with nails or brads of sectional area exc 13 & not exc 25 Sq cm complete all as specified and directed by Engr-in-Charge.

M & L for 2nd class hard wood as in plain fillets, square, rectangular, traingular in section wrought secured with nailsor brads of sectional area exc 6 & not exc 13 Sq cm complete all as specified and directed by Engr-in-Charge.

M & L for 2nd class hard wood as in plain fillets, square, rectangular, traingular in section wrought secured with nailsor brads of sectional area exc 3 & not exc 6 Sq cm complete all as specified and directed by Engr-in-Charge.

M&L for hard core of gauge n. exc .63 mm but n exc. 100 mm deposited spreaded,leveling watering and well ramming brokened stone complete all as specified and directed by Engr-in-Charge.

M & L for preparation and applying two coat of synthetic enamel paint on wooden surface over one coat of pink primer n exc 10cm width or girth complete all as specified and directed by Engr-in-Charge.

M&L 12mm thick particle board medium density,flat pressed, single line layer type or three layer type with BWR type adhesive, fixed with screws to timber framework complete all as specified and directed by Engr-in-Charge.

M&L 18/19mm thick particle board medium density,flat pressed, single line layer type or three layer type with BWR type adhesive, fixed with screws to timber framework complete all as specified and directed by Engr-in-Charge.

M&L 4mm thick plywood, grade BWR,type BB fixed with screws to timber frame work complete all as specified and directed by Engr-in-Charge.

M&L 0.9mm thick Decorative laminate type 1 , of surface finish, colour and patern as approved fixed eith approved adhesive as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (Square/Rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

Dismantling of wall and ceiling boards(fibre, pulp, insulationetc.) or insulation boards/ slabs/ blankets, any thickness including cover fillets complete all as specified and directed by Engr-in-Charge.

Dismantling Timber scantling in fillets under 40 sq. cm in section in any position of framed work complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete floor and paving not exc 15cm thick below or above ground floor complete all as specified and directed by Engr-in-charge.

M&L for 300x200x7 mm thick glazed cloloures ceramic tiles as in dado laid over & incl 10mm thick back coat in CM 1:4 etc. set and jointed in neat cement slurry and pointed in coloured cement with pigment complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick cement concrete type c2 1:3:6 (using 40mm graded stone aggregate) as in plinth protection finish even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 25 mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in floor, including rough finished with out using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for walling of random rubble stone masonry uncourced well bonded bedded and solidly hearted built in CM 1:6 for foundation wall,retaining wall,manholes,tank staging etc Complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C1 using 20mm graded crushing stone aggregate as in coping including necessary formwork complete all as specified and directed by Engr-in-Charge.

Returning filling in hard soil including sprreading,levelling, watering and well ramming in layers n.exc 25cm thick in each layer complete all as specified and directed by Engr-in-Charge.

M & L for Non-Skid Ceramic coloured tiles 7 to 8 mm thick(square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors laid over & including 15mm thick screed bed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed by Engr-in-Charge.

M&L for Removing excavated soil n.exc 50 m distance and depositing where dircted at a level in n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.

M&L For Machine cut kota stone slab flooring 20-25mm thick laid over & including 15mm thick screed bed in CM 1:6 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.

M&L Chequered cement concrete its 20cm x 20cm x 25cm thick,laid over & including 15mm thick screed bed in CM 1:6 set, jointed and pointed in neat cement slurry in floor with grey cement complete all as specified and directed by Engr-in-Charge.

M&L for renderning 15mm thick in CM 1:6 block masonry surface and finshed even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Material & labour for 50mm thick cement concrete type C2, 1:3:6 (using 40mm graded agg) as in plinth protection finishing fair and even complete all as specified and directed by Engr-in-charge.

M&L for renderning 15mm thick in CM 1:4 block masonry surface and finshed even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

S&F in repair 19mm dia curtain rods fancy type, mild steel chromium plated with fixing brackets, stops, rollers all as specified and as directed by Engr-in-charge.

Supply & fixing 3mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge.

S& F In repairs alu(Die cast body) door closer hydraulically regulated designation No.3 uviversal type , suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surface and applying two coat of cement base paint complete all as specified and directed by Engr-in-Charge.

S&F in repairs 100mm Mortice lock brass 4 lever vertical type complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces and applying three coat of white wash on walls complete all as specified and directed by Engr-in-Charge.

S&F 2nd class hard wood plain solid, stright chowkats and frames wrought framed rebated on the solid, rounded or chamfered put pogether with glue pinned at joints complete all as specified and directed by Engr-in-Charge.

S&F in repairs 30mm width of flaps (when open) continuous (piano) hinges, mild steel , bright finish or electrogalvanised all as specified and as directed by Engr-in-charge.

M&L 35mm thick 2nd class hardwood plain framed panneled shutter with lock rail and panel of 9mm BWP commertial ply or 12mm veneered partivle board with commercial veneering on both faces. The size of rail and dtiles as per IS-1003 (Part-1) klin seasoned and chemically pressure treated complete complete all as specified and directed by Engr-in-Charge.

S&F in repairs 100mm brass handles ,cast type, polished bright all as specified and as directed by Engr-in-charge.

S&F Aluminum, anodised, barrel tower bolt of 100mm extruded section and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs 65mm Mortice lock two lever (vertical type) mild steel body all as specified and as directed by Engr-in-charge.

Dismentling plain or corrugated steel sheeting any gauge any thickness complete all as specified and directed by Engr-in-Charge.

S&F 250mm long Aluminum alloy, anodised, sliding door bolts plate with hasp, staple (Bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding blots extuded sections or cast - aluminum alloy and fixed complete all as specified and directed by Engr-in-Charge.

S/F mild steel galvanised iron corrugated sheeting of thickness 0.63 mm with two corrugations side lap, fixed with L-type or J-hooks and washers in roof,walls etcwith grade of zink coating 275 complete all as specified and directed by Engr-in-Charge.

Ditto as item No. 46 above but fixing only

S&F Aluminum handle cast type, anodised of 150mm long fixed with screw to shutter complete all as specified and directed by Engr-in-Charge.

S&F 0.80 mm thick plain , galvanised , mild steel sheeting , in ridges, hips, valley gutters, drip and straight flashing ( length and girth as fixed ) of class -8, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engr-in-charge.

M&L PVC (SWR) floor trap 75 mm plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness,size,quality,or description)nfrom wooden frame ,glazed with oil putty or fixed with beads complete all as directed by Engineer-in-Charge.

S&F vitreous China squatting pan Orissa pattern size 580 x 440mm with internal foot rest (excluding , flusing cistern and flush pipe) concrete S or P Trap complete all as specified and directed by Engr-in-Charge.

Supply and Fix plain sheet glass/pin headded glass of 5.5 mm thick in Squares exceeding 0.50 Sqm in each pane with wodden biddings/oil putty complete all as directed by Engineer-in-Charge.

S&F low level flushing, cistern valve less Symphonic action type 10 Ltre Cap with inlet valve flot and handle incl bracket complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frames exc 1.5 sqm but not exceeding 4 sqm each but with shutter (without taking off shutter from the frame) and removing to store complete all as specified and directed by Engr-in-charge.

S&F Vitreous China urinal flat back size 465x355x265mm white with grating and union for discarge pipe complete incl fixing plug, bedding , urinal against wall in CM 1:2 securing urinal to plug pointing around back in cement fixing autometic flushing cistern with bracket flush pipe grating and union for discharge pipe etc complete all as specified and directed by Engr-in-Charge.

Taking down damaged/rusted steel works such as steel windows/ventilator etc of any description and in any position complete all as specified and as directed by Engr-in-charge.

S&F flush shutters 30 mm thick solid core construction,with block board core and plywood face panels,commercial type on both sides complete all as specified and directed by Engr-in-Charge.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing of Fe 410W (Gde-E-250) etc (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed by Engr-in-Charge.

Supply & fixing MS barrel tower bolt of 100mm long stove enamelled black with bright bolt complete all as specified and directed by Engr-in-charge.

Supply & fixing MS barrel tower bolt of 150mm long stove enamelled black with bright bolt complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) pipes single socketed in any length with ring joints laid in trenches 110mm dia complete all as specified and directed by Engr-in-Charge.

M&L for RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in Lintel beams roof beam all as specified and directed by Engr-in-Charge.

Supply & fixing 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolts plate and two on couple plate and fixed complete all as specified and directed by Engr-in-charge.

M&L for RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in plinth beams; bases for columns, etc. basement slabs, underremaed pliles & mass concrete all as specified and directed by Engr-in-Charge.

S&F 100mm long MS butt hinges medium weight cold rdlled complete all as specified and directed by Engr-in-Charge.

M & L for MS TMT bar 10 mm dia and over , cut to length, bent to shape required including cranking, spirally or hooking for columns , hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as directed by Engr-in-charge.

Supply & fixing MS pressed handle oval type stove enamelled black of 125mm long fixed with screw to shutter complete all as specified and directed by Engr-in-charge.

M & L for MS TMT bar 8 mm dia, cut to length, bent to shape required including cranking, spirally or hooking for columns , hooking ends and binding with MS wire (annealed) not less than 0.9mm dia as in stirrups complete all as directed by Engr-in-charge.

S&F steel window with side hung shutters fitted with box type hinges incl guard bars, handles peg stay etc incl cutting the holes in wall for fixing the window all as directed by Engr-in-charge.

Material and labour Providing precast reinforced cement concrete (1:2:4) type B1 (using 20mm stone graded aggregate) as in man hole cover, set in CM (1:4) complete all as specified and directed by Engr-in-Charge.

Material & labour for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over pink primer complete all as specified and directed by Engr-in-charge.

Supply and Fix plain sheet glass/pin headded glass of 3 mm thick in Squares exceeding 0.50 Sqm in each pane with oil putty and clips complete all as directed by Engineer-in-Charge.

S&F fixing vitrous China wash basin white flat size 550x400mm incl bracket cutting for and pining in ends of brackets or erecting stand but exclusive of fixing of Waste pipe complete all as specified and directed by Engr-in-Charge.

Demolition of PCC block built in cement mortar including all quoins arches pillars , etc complete all as specified and directed by Engr-in-Charge.

S&F pillar tpas cast 15mm bore dia, copper alloy with capsten heads chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe fancy type complete all as specified and directed by Engr-in-Charge.

Material & labour for Precast cement concrete block masonry 1:3:6 type C-I with solid block exc 10 cm in width and setting in cement morter 1:6 complete all as specified and directed by Engr-in-charge.

S&F 15mm bib tap fancy type chromium plated cast copperalloywith crutch or butter fly handle long neck complete complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick in CM 1:6 on Concrete surface even and smooth and without using extra cement complete all as specified and directed by Engr-in-Charge.

S&F granting square 150mm of PTMT (Minimum weight 100 gms) complete all as specified and directed by Engr-in-Charge.

Material & labour for preparation of new surfaces and & applying two coat of distempering over a coat of primer complete all as specified and directed by Engr-in-charge.

S&F soap dish vitreous chinawhite, approximate size 160x160x90mm embedded in the wall complete all as specified and directed by Engr-in-Charge..

S&F 600x450mm believed edged mirror of slected quality glass mounted on 4mm thick AC Building board or plywood BWR 6mm thick complete all as specified and directed by Engr-in-Charge.

S&F Angle stop valve of PTMT any colour pressure screwed for iron pipe and fixed (15mm minimum weight 90 Gms) 15mm dia fixed to iron pipe complete all as specified and directed by Engr-in-Charge.

Rotational moulded polythylene water storage tanks of capacity 500ltr (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F tubing 15mm dia, medium grade galvanized with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

S&F Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed of size 15 mm bore dia of pipe complete all as specified and directed by Engr-in-Charge.

M& L for PCC 1:4:8 type D-2, (using 40mm graded stone aggregate) as in bed of drain for 150mm bore pipe incl packing under , and haunching against the sides of the pipes after they are laid in and tested complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/aluminium point wiring from existing points (light, fan, socket or power) alongwith compete fittings such as switches ,ceiling rose, pendent holder, sketch fitting & regulator etc. including making good to the disturbed surfaces of wall, roof and floor etc. to match with the existing surfaces complete all as specified and directed by Engineer-in-Charge.

Taking down unserviceable submain wiring and service cable alongwith batten /PVC conduits etc. and making good disturbed surfaces of walls/floors and match the existing surface complete all as specified and directed by Engr-in-Charge.

Taking down unserviceable main switches, DBs with MCB SP/Isolators by unscrewing form board complete all as specified and directed by Engineer-in-Charge

M&L for point wiring using approved colour coding as per IS with using approved coper coding as per IS 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of FRLS PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision PCV Box on top for fixing switches sockets etc. all as specified for one light point/ fan /Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 93 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with cable 2.5sqmm including provision of 1.5 sqmm single core multistanded FRLS PCV insulated copper conductor as earth conducting conductor complete all as per specified and directed by Engineer-in-Charge.

All as per Srl item No 93 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge.

All as per Srl item No 93 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the same board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge.

Supply and fixing of switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge.

Supply and fixing of socket outlet 6 pin 5 & 15 Amp 2-in-one 230 Volt flush type complete all as specified and directed by Engineer -in-Charge.

Supply and fixing of socket outlet 5 pin 5 Amp 2-in-one 230 Volt flush type complete all as specified and directed by Engineer -in-Charge.

Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge.

M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge.

Supply and fixing surface & wall mounted LED 20W tube light fitting batten 4 feet with extruded aluminium housing and robust construction 20W system lumen with all accessories all as specified and directed by Engg-in-Charge. Make: Wibro Cat No. VIO 921208 &LL13-181-65SE or equivalent of Bajaj and CG/Philips

S&F Recess mounting fitting circiler LED downlighter 12W LED luminaires including 12W LED lamp complete all as specified and directed in Engineer in charge .Make Wipro Cat No CRDL11R017HP57 or equivalent make as per listed in appx 'B'.

S&F fancy wall mounting fitting 12W LED luminaires including 12W LED lamp complete all as specified and directed in Engineer in charge

Material and labour for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED lamp 07 W system lumen (NOM) 600 with all accessories all as specified and directed by Engg-in-Charge.

Supply & Fixing energy saving new generattion 10W LED IP 65 bulkhead luminaries with opal diffuser powered with high power LED as light source complete all as specified and directed Make : CG Cat Part No- LHEAAOP7U26W010 or equivalent Approved makes as per Appx 'B' of Tender documents.

Dismantling and Supply,fixing, Testing water heater storage type (Geyser) 5 star rated with multifunctional safety valve, electric operated 230 V, Single Phase complete including one no of heating element, automatic, thermal cut out, fusible plug, anti vacum sys, built in presser release valve,thermostat, rust proof powder coated body, indicator lamps and all safety devices as per E-in-C's Branch technical instructions and of capacity 25 liters including provn of grouting bolts in walls including piller cock , pvc connection ect and making good disturbed surfaces and all as specified and directed by Engineer-in-charge. Approved makes as per Appx 'B' of Tender documents.

Dismantle old u/s exhaust fan S&F for exhaust AC, Single Phase 450mm sweep metal body heavy duty, with louvre complete all as per specified and directed by Engineer-in-Charge.

S&F for exhaust AC, Single Phase 300mm sweep metal body, with louvre complete all as per specified and directed by Engineer-in-Charge.

Supply and fixing of sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt complete all as specified and directed by Engineer-in-Charge

Supply and fixing of sheet metal enclosure double door for DBs single pole and neutral for 4 way 240 volt complete all as specified and directed by Engineer-in-Charge

S&F MCB SPN 40 Amp,10 KA

S&F MCB SP 6 Amp to 20 Amp, 10 KA.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall FRLS PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 16 Sqmm complete all as specified and directed by Engr-in-Charge.

M&L for submain wiring with cable insulated single core multistranded copper conductro cable 1100 Volts grade 6 Sqmm 2 runs and one 4 Sqmm as earth wire drawn through & incl in PVC casing caping of suitable saze medium grade complete all as specified and directed by Engr-in-Charge.

M&L for earthing complete with galvanised mild steel earth plate of size 600 x 600 x 6 mm thick, buried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below the ground level with top edge of the plate not less than 1.5 mtr below the normal ground level connected to the galvanised iron or earth lead wire 4 mm dia (8SWG) by means of nut, bolt, check nuts and washer of galvanization iron including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinforcement with XPM weighing not less than 1.87 Kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanized steel tubing up to 7.5 mtr for drawing earth wire protection, common salt, charcoal etc complete all as shown in electrical plate No-3 of SSR Part-I and testing on completion.

Net Contract Sum will be after deducting Sch Of Credit of Rs. 22301.50

M/S SHIV NATH ENTERPRISES

PRITPAL SINGH