Special repair modification of office buildig conversion of existing store into RD office with attached retiring room and toilet, conversion of existing library into exhibition hall and seminar smart classroom at RRS Uchani, Karnal

Amount

Civil work 1 to 64:- Loading , unloading for sand /earth/ building rubbish (HSR 4.1 (a)

Disposal of surplus excavated soil with a lead of 2 K.M. excluding loading, unloading {HSR 5.2(b)}

Earth work in excavation in foundations, trenches, etc .in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches ,stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres. (HSR 6.6)

Dismantling brick work, tile masonry or tile lining and tile terracing. {HSR (8.5(b)} (b) in cement

Dismantling cement conglomerate/ terrazzo floors 25 mm to 50 mm thick including concrete base (HSR 8.25)

Scraping white wash and colour wash. (HSR 8.32 (a)

Centering and shuttering for faces of walls, partitions, retaining walls, well steining and the like (vertical or battering) including attached pilasters, buttress etc. (HSR 9.5)

Cement concrete 1:8:16 with stone aggregate 40 mm nominal size in foundation and plinth (HSR 10.28)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in foundation and plinth (HSR 10.41)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level (HSR 10.59)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all respects. (HSR 10.81)

Cement concrete 1:2:4 with stone aggregate 20mm nominal size for reinforced concrete work in slabs with inclination exceeding 25 degree with horizontal, excluding steel reinforcement , but including centring and shuttering, laid in position , complete in all respects. (HSR 10.82)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns,(square or rectangular) battens and lintels etc., excluding steel reinforcement but including centring and shuttering, laid in position, complete in all respects. {HSR 10.86)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in footings, strips, foundations, beams, rafts, pedestals and approach slabs of bridges etc., excluding steel reinforcement but including centring and shuttering, laid in position, complete in all respects,(For work upto 1.5 metres below ground level). (HSR 10.90)

Extra over item No. 10.79 to 10.94 if cement concrete 1:1.5:3 mix is used instead of CC 1:2:4 {HSR 10.95 (a)}

D.P.C. 40 mm thick of cement concrete 1:2:4 using stone aggregate with 2 coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded {HSR 10.114}

First class brick work laid in cement sand mortar 1:6 in foundation and plinth (HSR 11.2)

First class brick work laid in cement sand mortar 1:6 in first storey upto 4 meters above plinth level (HSR 11.7)

11.43 cm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement stone dust (from crusher) mortar in superstructure (HSR 11.51)

Terracing consisting of tiles 22.86 cm X 11.43 cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and an other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. (HSR 13.13)

Providing and fixing false ceiling with 12 mm thick Gypsum Board fixed on M.S. steel runners frame including cost of screws angles, cleats, rawel plugs with taping, filling with Gypsum compound and applying priming coat etc. complete in all respects (HSR 13.91)

Providing and fixing mineral fibre false ceilings tiles at all eights of size 595 x 595 mm of approved texture, design and pattern, the tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity K = 0.052 (-) 0.057 w/m k, Fire Performance as per (BS 476 pt – 6 & 7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round eights ed iron section of 0.33 mm thick (galvanized @ 120 gsm) comprising of main T runners of 15 x 35 mm of length 3000 mm, cross T of size 600 x 600 mm suspended from ceiling using galvazied mild steel item ( eights ed @ 80 gsm) 50 mm long 8 mm outerdiameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85 x 25 x 2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls/partitions with the help of GI perimeter wall angle of wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all eights, The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-charge. With or without groves (HSR 13.92)

Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling (HSR 14.1)

Dholpur stone 25 mm thick in wall facing (lining) laid in any pattern as specified on 12 mm thick cement coarse sand mortar 1:3 and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, pins and dowels etc. {HSR 14.60}

Providing and fixing vitrified tiles of size 600 x 600 mm of approved make in flooring laid in any patterns as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles {HSR 14.89} Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSONS, RAK & SIMPOLO. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this.

Providing and fixing vitrified tiles of size 600 x 600 mm of approved make in skirting / dado laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles {HSR 14.90} Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSONS, RAK & SIMPOLO. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this.

Providing and fixing ceramic tiles/ anti skid tiles of size 400 mm x 400 mm or above size of approved make in flooring, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSONS, RAK & SIMPOLO. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this. (HSR 14.91)

Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colour, shades except burgundy, bottle green, black of any size of approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete (b) size of ceramic glazed tiles 300 mm x 450 mm (HSR 14.92 (b)

12mm thick cement plaster 1:5 (HSR 15.6)

12 mm thick cement plaster 1:6 on walls (HSR 15.7)

15 mm thick cement plaster 1:5 on the rough side of single or half brick wall (HSR 15.11)

15 mm thick cement plaster 1:6 on the rough side of single or half brick wall (HSR 15.12)

10 mm thick cement plaster 1:4 underside of ceiling (HSR 15.52)

Cement pointing 1:2 flush on flat brick flooring (HSR 15.71)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade (HSR 16.3)

Applying priming coat with metal primer on new steel or iron work including preparation of surface (HSR 16.9)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces (HSR 16.25)

White washing three coats (HSR 16.48)

Distempering with washable oil bound distemper (of approved manufacture) two coasts excluding priming coat on new work (HSR 16.57)

Finishing walls with exterior decorative cement based paints such as snowcem , Robbiacem etc. on new work, two coats to give an even shade.(HSR 16.61)

Providing and applying two coats of white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc., complete (J.K/ Birla make) (HSR 16.81)

Providing and fixing sliding bolt with nuts and screws etc., complete- (b) Aluminium (ii) size 250 mm x 16 mm {HSR 17.83 (b) (ii)}

Factory manufactured solid flush door shutters, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats and stops, etc., (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)- (a) commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges :- {HSR 17.93 (a) (iii)} (iii) 35 mm thick

Providing and fixing Aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS;733 and IS; 1285 fixed with raw plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. aluminium sections shall be smooth rust free straight mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling C.P. brass/ stainless steel screws, all complete. (HSR 17.95) Fixed portion (Anodized Aluminium transparent or dyed to required shade according to IS;1868, minimum anodic coating of grade AC 15)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS; 733 and IS;1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. Aluminium sections shall be smooth, rust free straight mitered and jointed mechanically wherever required including clear angle, Aluminium snap beading for glazing/ paneling C.P. brass/ stainless steel screws, etc. complete. Shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including of cost of PVC/ neoprene gasket required including Aluminium fitting (HSR 17.96)

Providing and fixing 12 mm thick prelaminated particle board flat pressed conforming to IS: 12823 grade I type II in paneling fixed in aluminium doors, Windows shutters and partition frames with C.P brass/ stainless steel screws etc. complete. (b) Pre-laminated particle board with decorative lamination on both sides. {HSR 17.97 (b)}

Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc. PVC/ neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic items). {HSR 17.98 (b)} (b) With float Glaass panes of 5.00 mm thickness

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS:6315 marked for doors including cost of cutting floors and cover plates with brass pivot and single piece M.S. sheet outer box. {HSR 17.99 (b)} (b) With Stainless Steel cover plate

Providing fixing aluminium round shape handle of outer dia 100 mm with screws etc. complete. {HSR 17.102(i)} (i) Anodized (AC-15) Aluminium.

Steel work, fixed independently without connecting plates, including cutting, hoisting and fixing in position in :- {HSR 18.1 (b)} (b)M.S. Flats

Steel work, fixed independently without connecting plates, including cutting, hoisting and fixing in position in :- {HSR 18.1 (c} (c ) tees, angles and channels

Wrought iron and mild steel (using angles, flats square bars. tees and channels) ladders, grills, gratting frames, window guards, iron door openable or fixed stair case or parapet or any other type of railing , gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position (HSR 18.12)

Supplying M.S. Bolts of required sizes with nuts and washers complete {HSR 18.15(a)}

Steel reinforcement TMT bars FE-500 EQR/FE-500 D grade or more for RCC work, where no included in the complete rate of RCC incluidng straightening, bending, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. and placing in position, complete in all respect for all heights/depths/storeys/basements etc. Note: Reinforcement shall be measured in length including hooks, if any, separtely for different diameters as actually used in work excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. (HSR 18.22)

Supplying openable steel doors and windows, of standard steel sections, joints mitred and electrically flash welded including provision for arrangement of receiving handles, peg stay, catcher will also be welded with the frame and providing and fixing pressed steel projected hinges, iron lugs, glazing clips (excluding wooden shutters, glazing and fittings such as handles, peg stay and catcher etc.) and finished with one coat of ready mixed red lead non setting primer (HSR 18.24)

Fixing steel windows in walls with lugs, embedded in 15 cm x 11.43 cm X 7.5 cm cement concrete blocks, of 1:3:6 mix, excluding fixing of glass panes but including cost of cement concrete for lugs (HSR 18.29)

Supplying and fixing glass panes including special metal sash putty of approved make (b) glass panes 4 mm thick, exceeding 40 sq dm areas {HSR 18.30 (b)}

Providing and laying 15 mm to 18 mm thick Sarderali Granite stone in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of stone including mirror polishing to give high gloss finish, complete. (NS)

Providing and laying 15 mm to 18 mm thick Sarderali Granite stone in skirting laid in any pattern as specified over base of 12 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of stone including mirror polishing to give high gloss finish, complete. (NS)

Providing and fixing 12mm thick toughened glass of AIS/Modi Guard/Saint Gobain make duly toughened by standardized plant, with required holes and cut outs in fixed partition & openable panels/leaf for fully glazed double leaf doors, complete in all respects as per architectural drawing and design or instructions of Engineer-in-Charge. (NS)

Providing and fixing fittings/accessories i.e. handle of size 600 mm x 30 mm of DORMA make (model XL-C-3004) including cost of stainless steel screws etc. complete in all respect as directed by Engineer-in-Charge. (NS)

Providing and fixing fittings/accessories i.e. glass door package with lock (floor machine) of DORMA make (model XL-C-4001) including cost of stainless steel screws etc. complete in all respect as directed by Engineer-in-Charge. (NS)

Providing and fixing G.I. interlocking fencing of size 3”x 3” made of 10 gauge wire fixed in angle iron frame (excluding cost of angle iron frame) including cutting holes in M.S. flats/angle iron etc., complete in all respects as per architectural drawing and design.(NS)

Supplying and fixing readymade white writing board of PRESKO make with delux frame or any other similar brand, fixed in position, including wooden gutties, nails and screws, etc., complete in all respects as per drawing and design. (NS)

Public Health work 65 to 131:- Excavation of trenches in streets, lanes or in open areas for storm sewer, sewers running by gravity and manholes to full depths as shown in drawing including shoring, timbering of poling boards, frame system type, dressing to correct sections and dimension, according to templates and levels, dewatering, provision for diversion of traffic, cutting trees and bushes, etc., night signals, profiles, pegs, sight rails, boning rods, crossing over trenches, for access to the houses, watching, fencing, etc., fixing and maintenance of caution boards, refilling of trenches, watering of refill, in 15 cm layers, ramming and restoration of unmetalled or unpaved surface to original condition and removal of surplus soil, from site of work, up to a lead of 1 K.M. in ordinary soil {HSR 6.10(a)} (a) for depth of excavation not exceeding 3 metres below ground level

Cement concrete 1:8:16 with stone aggregate 40 mm nominal size in foundation and plinth.(HSR 10.28)

Cement conc. 1:2:4 with stone aggregate 20 mm nominal size for reinforced conc. Work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects. (HSR 10.82)

Extra over item Nos.10.79 to 10.94, if 1:1½:3 mix is used instead of 1:2:4. {HSR 10.95(a)}

First class brick work laid in cement sand mortar 1:5 in first storey up to 4 metres above plinth level.(HSR 11.8)

12mm thick cement plaster 1:5 (HSR 15.6)

Steel reinforcement TMT bars FE-500 EQR/FE-500 D grade or more for RCC work, where no included in the complete rate of RCC incluidng straightening, bending, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. and placing in position, complete in all respect for all heights/depths/storeys/basements etc. Note: Reinforcement shall be measured in length including hooks, if any, separtely for different diameters as actually used in work excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods for binding and placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. (HSR 18.22)

Labour for laying, jointing, fixing and testing G.I./P.V.C./W.I. pipe lines and specials tees, bends, sockets elbows etc. inside building and testing etc. complete including cutting threading. {HSR 28.18(b) (i)} INCLUDING COST OF SPECIALS (i) 15 mm internal diameter of pipe line

(ii) 20 mm internal diameter of pipe line {HSR 28.18(b) (ii)}

Extra for fixing and jointing union couplings in G.I and W.I pipe lines. (HSR 28.21 (a) (a) 15 mm internal diameter

(b) 20 mm dia (HSR 28.21 (b)

Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. (HSR 28.24 (a) (a) 11.43 cm thickness wall

(b) 22.86 cm thickness wall (HSR 28.24 (b)

Cutting holes up to 23 cm square for pipes in floor and roofs of cement concrete reinforced concrete or reinforced brick work and making good including repointing, replastering, replacing bitumen and colour or white washing where required. {HSR 28.26(b)} (b) 115 mm thickness of roof of floor

Fixing and jointing gun metal peet valves (heavy pattern) with hand wheels, on G.I pipelines laid in the ground or inside buildings including cartage from divisional stores or nearest railway station to site of works. {HSR 28.29 (a)} (a) 15 mm internal diameter

(b) 20 mm internal diameter {HSR 28.29 (b)}

Making connection with the existing G.I branch main up to 40 mm size including cutting and threading pipe etc., complete excluding cost of tee and long screw, but including cartage of material to site. (HSR 28.34)

Constructing brick masonry inspection chambers sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 percent lime mortar2:3 in foundation cement concrete 1:2:4 benching 12 mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/C.C. topping. 50 mm thick with 455 mm x 455 mm/ 455 mm x 610 mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I specification painted with 3 coats of black bitumastic superior paint complete as per standard design. (HSR 29.84 (b) (b) size 450 mm x 600 mm inside ( with 455 mm x 610 mm cover and frame single seal pattern 1 weighing 38 kg with C.C. topping)

Extra for over 0.30 meter depth of inspection chamber:- {HSR 29.85 (b)} (b) 450 mm x 600 mm

Providing salt glazed stone ware pipes grade ‘A’ in standard length of 600 mm each pipe marked with is: 651 and their lowering, cutting, jointing and testing as desired in HSR item No. 29.38, 29.39, 29.40, including the cost of jointing materials as well as carriage, loading, unlloding stacking, handing, re-handling etc. complete in all respects to the satisfaction of Engineer-In Charge. (HSR 29.95) 150 mm internal dia

Providing and fixing in position best Indian make European type water closet suite with concealed ‘P’ of ‘S’ trap with or without vent (as approved by the Engineer-in-Charge) and all other necessary fittings as fully described in item No. 30.3 above (without cost of C.I. high level flushing cisterns) {based on HSR 30.6(i)} (White)

Extra over item no. 30.3 to 30.6 for providing and fixing best Indian make plastic hygenic seat with lid complete instead of hollow black or white plastic seat and lid. {HSR 30.13 (i)} (i) White plastic seat ( Solid)

Extra for providing and fixing 32 mm dia. G.I/ C.P flush pipe complete with accessories instead of 32 mm dia. Galvanised telescopic flush pipe with clips ( as required by the Engineer-in-charge) {HSR 30.15(b)} (b) 32mm dia C.P brass flush pipe

Providing and fixing in position best Indian make flat back or angular lipped front urinal 465 mm high consisting of :- {HSR 30.19 (i)} (i) Flat back lipped or angular urinal basin of Vitreous china ware (to the approval of the Engieer-In-Charge)

Extra for providing and fixing vitreous automatic flushing Cistern including fittings and brackets of C.I. flushing cistern complete {HSR 30.37(a) (i)} (a) 5 ltr. capacity cistern (i) white

Extra for providing and fixing standard size C.P. brass flush pipe complete with fittings instead of G.I flush pipe complete {HSR 30.38 (i)} (i)For single urinals

Providing and fixing in position best Indian make (ordinary) lavatory suites consisting of Lavatory in vitreous china ware size as given below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary, R.S or C.I brackets for building into wall including painting;32 mm C.P. brass waste with C.P brass chain and rubber plug;15 mm C.P brass screw down pillar tap with jamnuts or couplings best design ( as approved by the Engineer-in-charge) all fittings best Indian make and; to the approval of the Engineer-in-chargeall brass work chromium plated and complete in all respects including cutting and making good the walls and floors and painting of fittings etc. {HSR 30.41 (iv)} White (iv) size 550 mm x400 mm with one no tap

Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall or lead waste pipe (weighing 3.47 kg per meter and 2.8 mm thick) up to floor level including cost of wipped solder joint etc., complete (as required by the Engineer-in-charge) (HSR 30.48)

Providing and fixing in position best Indian make chromium plated brass bottle trap 32 mm diameter {HSR 30.50}

Providing and fixing 40mm G.I waste pipe embedded in walls or lead waste pipe weighing 4.46 kg/ metre and 3.0 mm thick up to floor level as required by the Engineer-in-charge including cost of union and plumber joint. (HSR 30.62)

Providing and fixing in position best Indian make paper holders fixed into wall with C.P brass screws complete in all respects including cutting and making good the walls etc. {HSR 30.67(a)} (a) C.P. brass

Providing and fixing in position best Indian make towel rails fixed in with rawlslugs embedded in walls with C.P brass screws. Complete in all respects including cutting and making good the walls etc. {HSR 30.68(b)(ii)} (b) 20 MM DIA C.P. BRASS ADJUSTABLE (ii) 600mm long

Providing and fixing in position best Indian make soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the walls etc. {HSR 30.70(a)(ii)} (a) C.P. BRASS (ii) soap dish small

Providing and fixing in position best Indian make bevelled edge 5.5 mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P brass screws ( as required by the Engineer-in-charge) complete including cutting and making good the walls etc.{HSR 30.71(a)(i)} (a) INDIAN MAKE (i) 600mmx450mm

Providing and fixing in position best Indian make coat and hat hooks fixed into wall with C.P brass screws and rawl plugs etc. complete including cutting and making good the walls etc. {HSR 30.73(a)(ii)} (a) C.P. BRASS (ii) two way

Providing and fixing in position 15 mm i/d C.P brass bib cocks of best quality ( as required by the Engineer-in-charge) {HSR 30.75(a)} (a) Bib cock long body

(c) Bib cock {HSR 30.75(c)}

Providing and fixing in position C.P brass stop cock (as approved by the Engineer-in-charge) {HSR 30.76(a)(ii)} (a) 15 MM STOP COCK (ii) concealed stop cock with flange

Providing and fixing in position best Indian make C.P brass inlet connection 15mm with 375mm pipe and C.P brass nuts. {HSR 30.83}

Providing and fixing in position H.C.I soil waste vent or antisyphonage pipes to I.S.I specifications of E.L.C manufacture or of any other reputed firm including cutting and wastage etc. and cutting holes in walls, roofs or floors etc. and making good to its original condition but excluding cost of lead jointing. {HSR 30.84 (a )} (labour rate) (a) 100 mm internal diameter

(b) 75 mm internal diameter {HSR 30.84 ( b)} (labour rate)

Providing lead caulked joints to H.C.I pipes and specials conforming to I.S.I specification of E.L.C manufacture or any other reputed firm including cost of lead yarn, fuel and tools etc. (HSR 30.87 (a) (a)100 mm i/d

(b)75 mm i/d (HSR 30.87 (b)

Providing and fixing in position M.S. or heavy flat iron clamps made out of M.S flat not less than 5mm of the approved design for fixing C.I soil waste vent or anti pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting {HSR 30.88b)} (b) for 75mm internal diameter pipes

Providing and fixing H.C.I. floor traps I.S.I. marked of the self cleaning design with C.P. brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under the around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors, etc., minimum depth of water should be 150 mm with a minimum seal of 50 mm. (HSR 30.89 (b) (b) With 75 mm internal dia outlet

Providing and fixing in position H.C.I specials for soil, waste, vent or anti-syphonage pipes to I.S.I marked including cutting and wastage etc/., and making good to its original condition but excluding cost of lead jointing. {HSR 30.91 (a) (xxii)} (a) For 100 Mm I/D Pipes (xxii) collars

(b) For 75 Mm I/D Pipes {HSR 30.91 (b) (i)} (i) heal rest bend

(xvii) Cowls {HSR 30.91 (b) (xvii)}

(xviii) Collars {HSR 30.91 (b) (xvii)}

Cutting chase in brick walls in cement or in floor for embedding G.I. or H.C.I. pipe lines and making good the same to its original condition {HSR 30.95(a) (a)size 75 mm X 75 mm

Providing and fixing in position automatic brass ball valves in tanks. {HSR 30.110 (b) (ii)} (b) With plastic ball (ii) 20 mm internal diameter

Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with H.C.I. grating 150 mm X 150 mm cast iron cover weighing approximately 7.26 kg. and frame clear opening 300 mm X 300 mm and outside size 330 mm X 330 mm and chamber including cost of all brick work in cement mortar 1:5 cement concrete 1:8:16 in foundations, and cement concrete 1:2:4 in coping around C.I. cover and frame et. With three coats of black bitumastic superior paint of approved manufacture on all C.I. work as per standard design, minimum depth of water should be 150 mm with a minimum seal 50 mm {HSR 30.114(b)} (b) 100 mm internal diameter H.C.I. gully trap

Providing and fixing HDPE WATER STORAGE TANKS of sintex, diplas O.K. Supreme make with covers/ lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Engineer-in- Charge. (HSR 30.119) 500 Ltr. Capacity

Supply of GI pipe 'B' Class ISI Marked Ravindra/Jindal/Parkash(Surya) Make. (NS) (a)15 mm i/d

(b)20 mm i/d

Supply of GI Union Couplings of UNIK/UNCO make . (NS) (a)15 mm i/d

(b) 20 mm i/d

Supply of Gun Metal Peet Valve ISI Marked of DRP/Leader/Bajaj make (NS) (a) 15 mm i/d

(b) 20 mm i/d

Supply and fixing in position stainless steel sink made of 1 mm thick Salem stainless steel sheet along with fittings of Blue Star/ Jayna make or equivalent as per AISI 304 (18/8), complete in all respect. (NS) Bowl size = 560 mm x 405 mm x 178 mm Overall size = 610 mm x 460 mm x 178 mm

Providing and installation of self contained drinking water cooler of fully stainless steel body (FSS) with refrigerant R-134 A, cooling capacity 120 liters per hour and storage capacity 120 liter suitable on operating power supply 230 ± 10 %, 50-Hz single face AC complete in all respect. Make = Usha/Voltas/Blue star as approved by the Engineer Incharge (N.S.)

Providing and fixing in position PVC flushing cistern 8.0 ltrs. capacity of Hindware/Cera/perryware make ISI marked, white, alongwith fittings complete in all respect. (NS)

Providing and installing split type air conditioners, five star rating inverter type with copper coils 2.0 ton capacity ± 10%) fitted with super tropical - DC PAM inverter- return cooled - rotary compressor operating on refrigerant R-410-A suitable for wall mounting confirming to IS : 1391 (part-2)/92 (except power consumption norms) with upto date amendments, suitable for operating on 230 volts, 50 Hz single phase A.C. supply having following specifications:- (i) Cooling coil row -3 Nos. (ii) Air flow (CMH) -1450 cum/ hr. (iii) Sound level (H/M/L)- 41/38/34/25(silent mode) (iv) Louvers swing- 3D + 3D Auto etc. complete in all respect MAKE :- O General/Toshiba/Mitsubishi (Heavy Industries) (five star rating) Model as approved by the Engineer-in-Charge

Providing and installation of automatic voltage stabilizer of 5.00 KVA capacity(heavy duty ) copper wound 100 up voltage of V-Guard /ISI marked complete in all respect. (N.S.)

Providing and fixing extra copper tubing/regrigerent pipe for above split air conditioners (if required) consisting of inlet, outlet pipes, insulation and electric wiring etc. as per requirement, complete in all respect beyond 4.0 metres length. (NS) NOTES :- INSTALLATION OF AIR CONDITIONERS INCLUDES:- 1. Mounting/ fitting indoor and outdoor units at their respective locations 2. Providing & laying refrigerant pipe line of four metres length and beyond (if required) and connecting both the units after drilling holes in the wall, if required. Thickness of the copper tubing shall not less than 0.80 mm. 3. Insulating the suction pipe with expanded polythene pipe tubing. 4. Providing & laying drain pipe to throughout the condensate water being formed in the indoor unit 5. Leak testing entire system 6. Charging refrigerant gas in the unit 7. Electric wiring ; suitable electric wiring and switch should be provided with in 4 metres of the location of the units as per requirement 8. PVC channels for concealing the pipes etc. 9. Refrigerant piping thickness- 18 guage (1 mm) (i) Liquid line :- 6.35mm (1/4") (ii) Gas line:- 15.88mm(5/8") 10. Providing and fixing 2.5 sqmm x 4 core coper wire sheathed for connections and communication between indore unit to outdoor unit. (NS)

Providing and fixing in position powder coated readymade MS stands (Heavy duty) for outdoor units including suitable nuts & bolts etc., of best quality complete in all respect (NS)

Providing, laying, fixing and jointing UPVC pipes and specials of 20 mm i/dia size for drainage of condensed water from air-conditioner to nearest disposal point, complete in all respect to the direction of the Engineer In-charge. Make:- Prince/Supreme/Skipper (NS)

Electrical work 132 to 182:- MOULDED CASE CIRCUIT BREAKERS {HSR 31.12(c ) (i)} Supply and erection of moulded case circuit breaker on wall or on existing pedestal including bonding to earth and necessary connections:- (i) 15 amp. to 60 amp. 415V 10 K.A 3 phases

(ii)100 amp. to 220 amp. 415V 10 K.A 3 phases {HSR 31.12(c ) (ii)}

(iii)250 amp. 415V 35 K.A 3 phases {HSR 31.12(c ) (iii)}

MINIATURE CIRCUIT BREAKER AND ISOLATOR: {HSR 31.17(a) (ii)} Supply and erection of miniature circuit breaker/isolator 240/415 V in the existing distribution board including making necessary connections (a) Miniature Circuit Breakers of 9 K.A. breaking capacity (ii)6-32 amp. SP MCB

(iii) 40-63 amp. TPN MCB {HSR 31.17(a) (iii)}

PIPE LAYING: {HSR 31.21 (xxx) (b)} Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required :- (xxx) S/E of PVC pipe of 6 Kg. pressure, laid 1 metre below ground level complete including digging refilling of the trenchy with jointing etc. (b) PVC pipe 80 mm dia

EARTHING {HSR 31.22 (i)} (i) Earthing with G.I. earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. as required

(ii) Extra for using salt and charcoal/coke for pipe earth electrode as required. {HSR 31.22 (ii)}

(xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15mm dia G.I. pipe from earth electrode as required. {HSR 31.22 (xii)}

UNDERGROUND CABLES {HSR 31.25 (xxix)} S/E of underground cable 1 metre below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches. (xxix) 95 sqmm 3.5 core cable(armoured)

UNDERGROUND CABLES Supply and erection of underground cable loose in existing pipe or trenches complete with necessary connections.{HSR 31.26 (xxix)} (xxix) 95 sqmm 3.5 core cable(armoured)

Miscellaneous {HSR 31.35 (i) (a)} (i) Supply of M.S. Pipe (B-Class) for suspension rod of ceiling fan including threading if required. (a) 15mm dia

(ii) S/E of girder clamp for ceiling fan including painting (upt 15cm section){HSR 31.35 (ii)}

S/E of PVC unsheathed copper conductor cable single core 1100 volt grade in pipe of suitable size excluding cost and erection of pipe {HSR 31.40 (i)} (i) Size 1.5 sqmm(3/0.81mm)

(ii) Size 2.5 sqmm(7/1.35mm) {HSR 31.40 (ii)}

(iii) Size 4 sqmm(7/0.85mm) {HSR 31.40 (iii)}

(iv) Size 6 sqmm(7/1.05mm) {HSR 31.40 (iv)}

S/E of PVC conduit pipe ISI marked (Medium) recessed in wall/ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work {HSR 31.44 (b)} (b) 25mm dia

S/E of copper lugs including crimping etc. upto the entire satisfaction of Engineer-in-Charge of work {HSR 31.45 (a)} (a) 4 sqmm to 6 sqmm

Pdg. and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. (HSR 31.56) 10 amp. 1 way switch

20 amp. Switch (HSR 31.56)

10 amp. Socket (HSR 31.56)

16 amp. Socket (HSR 31.56)

Fan regulator (HSR 31.56)

Bell Push (HSR 31.56)

Call Bell Ding Dong (HSR 31.56)

Blinking plate (HSR 31.56)

Pdg. and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. (HSR 31.57) 2 Modules

3 Modules (HSR 31.57)

6 Modules (HSR 31.57)

8 Modules (HSR 31.57)

12 Modules (HSR 31.57)

Supply, installation testing and commissioning of wall/free standing floor mounting dust & vermin proof compartmentalized cubical panel made out of 2mm thick CRCA sheet, required hardware 3mm thick Bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coat of Zinc/Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3mm thickness separate detachable gland plate MS base channel hinged door with inter locking arrangement for equipment/switch wear. Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar Bakelite sheet 3mm thick for separately cable alley to BBC from switch chamber extended solid copper bars upto cable alleys shall provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. The panel will be complete with control wiring (copper) and fuse protection (Only outer area on all sides shall be measured) (HSR 31.63)

Supplying and fixing of copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect.(HSR 31.64)

S/F of rotary handle for on/off operation of existing MCCB in the L.T panel i/c fixing the same in position with all labour and material required {HSR 31.66 (i)} (i) Rotary Handle above 125A MCCB

Supply and erection of heavy duty 4 Pole ON Load Changeover load breaker switch comprising of switches 63A to 400A suitable for operation on 415V complete with all accessories. iii) 200Amp 4 Pole ON Load Changeover Switch (HSR 31.74)

S/E/T/C of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/ channel and making necessaryconnection complete in all respect with all labour and material required to complete the job in all respect.{HSR 31.78 (i)} (i) 2 Pair telephone wire

SITC of Cat-6 Cable for data including the cost of petty material required to complete the job upto entire satisfaction of Engineer-in-charge.(HSR 31.80)

S/E of recessed type 42 watt full window glare free opal difffuse LED panel of size 595x595 mm suitable for Armstrong/POP/GB ceiling with M.S. Powder coated white housing. Total system lumen of 42 watt LED should be 5100 or above in cool day light (5600k to 6500k), Power factor >0.95, CRI (Ra) >80, LED lamp efficiency ≥140 lm/w, Average life >50000hours, complete with all accessories as required with connections.Code :- (NS) PLANO2*2PLR42WLED865S (Industrial) Make Havell's or Philiphs , Bajaj

S/E of AC ceiling fan capacitor type complete with shackle, 300 mm down rod etc. with rating 5 star. 1200 mm sweep. (NS)

S/E of AC ceiling fan capacitor type complete with shackle, 300 mm down rod etc. with rating 1400 mm sweep.(NS)

SITC of Data Point Switch including the cost of petty material required to complete the job upto entire satisfaction of Engineer-in-charge.(NS)

SITC of Telephone Jack Switch including the cost of petty material required to complete the job upto entire satisfaction of Engineer-in-charge.(NS)

S/E of surface/wall mounted ≤36W integrated LED 4 feet fitting with Epoxy Powder coated white/Grey extruded aluminium channel housing for efficient heat dissipation. Total system lumen of 20 watt LED should be ≥ 4000 or above in cool day light (5700K to 6500K), Power factor >0.95, CRI >80, Average life >50000 hours. Complete with mounting Brackets & accessories as required with connections (Industrial) Make: Philips, Havells, Wipro, Bajaj. (NS)

Supply of propeller type AC ventilating fan (exhaust fan) with necessary earthing arrangements of fan with shutter complete in all respects Size 380mm(15”) sweep Make: Orient, Usha, Khaitan, Havells. (NS)

S/I/T/C of push ON/OFF type 25 A modular type motor starter switch (white color) for AC's including the cost of petty material required to compete the job upto entire satisfaction of Engineer-in-charge. (NS) Make;- Schneider/Crabtree/Athena

S/E of surface/wall mounted ≤14W integrated LED 1 feet fitting with Epoxy Powder coated white/Grey extruded aluminium channel housing for efficient heat dissipation. Total system lumen of 14 watt LED should be ≥ 1400 or above in cool day light (5700K to 6500K), Power factor >0.95, CRI >80, Average life >50000 hours. Complete with mounting Brackets & accessories as required with connections(Industrial)Make: Philips, Havells, Wipro, Bajaj. (NS)

Supply, Installation, Testing and Commissioning of Interactive Flat Panel Wall Mount - Technology TFT LCD with DLED Backlit; Display size (diagonal) 86" or Higher. Aspect Ratio 16:09; Resolution 3840 x 2160 4K Ultra HD; Flicker Free Yes with Blue Light Filter; static contrast ratio 1200:1 (typ): brightness 350 nits:display clour 1.07B colours:input ports HDMI x 3:VGAx1;display portx1;audiox1;CVBS(AV);RS232x1;PC slotx2;Slotin for pc built inx1;Wifi module slot built in x 1;output port HDMI x1;audio (earphone out)x1;SPIDFx1;LAN RJ45 x1;USB3.0 type A x3;2.0 typeA x3;2.0 type B(for touch) x2 ;Speaker 16 w x2 ;Touch type :IR recognition;touch resolution:32767x32767,Touch point:20 points;writing :10 points; response time<15ms;support: windows (NS) Version:5.1;CPU:ARM quad core cortex A53 1.2Ghz;GPU ARM Mali-450 MP 4;Memory:2 GB;Storage:16GB eMMC;Networking:10/100M auto-identtification and DHCP;Anti Scratch-Anti Glare Minimum 7 H scratch resistant and anti glare ;mirror extending flexibility to allow content to be mirrored on two IFB simultanesouly through HDMI out.Save option built in save option directly to Google Drive and One Drive QR Code Scan:In Android Mode should have File download feature in smart phone just by scanning the QR code. Email: In Android juts by pressing of a icon the email should get generated and it should have facility to get the annotation/session attached as PDFautomatically. Split Screen: Should have the feature, built-in facility to split the screen in 2,3,4,5 or max.6 for simultaneous function/working on various application at the same time from a single PC. Annotation/Writing: Should be able to write on a Blank screen and on any application -PPT, Word, Excel, PDT, Web Browser, Video etc. Floating Tool: Should have floating tools which should appear just by press of 2 fingers for writing/annotation. Recording: It should also have recording function of Audio and Video. Quiz Built in Tool to allow participants to submit answwers from their Smart Phones, Zoom Video Conferencing - Built-in PC with IFP Core i5, DDR4 8GB, 2.5",128 GB SATA S3 SSD, Network: Wireless 802.11; Make: View Sonic/Samsung/Sony (NS)

Supply , installation of interconnecting copper wire for indoor & outdoor unit size 1mm 4 core and 2.5mm 3 core as required for all full functionary of the system etc. complete in all respect Make Finolex / Polycab/RR (NS)

Providing and fixing interconnecting copper wire for panel to outdoor unit size 6sqmm 4 core are as required for all full functionary of the system complete in all respect. Make Finolex/Polycab/RR(NS)

S/E of fancy pole 3 mtr. Long made out of cast iron base part and miled steel grooved pipe section and joined together by means of threaded joints alongwith a service window provided in the bottom part of the pole to accommodate a 6 amp. SP MCB and 30 amp. connector for mains connection. A cast aluminium embellishment shall be fitted to the grooved steel pole by grub screw fixing to enhance the decorative look of the pole. The pole shall be duly pre-treated by shot blasting process and painted in poly - urethane paint in approved colour shade having a minimum 300 salt spray hours quoting on the pole and should have minimum 90 micrones DFT. Pole Make: Twinkle, Homdec Lighting LED Specifications: LED should be ≤30 watt with cast aluminium housing diffuser translucent poly carbonate having quoting PU/Polyster LED should be ≤ 30 watt with separate driver placed integrally in luminaire housing. Driver should be of THD ≤ 10% and power factor above ≥0.95, External surge protection device of 10 KV should be provided. LED lumen should be ≥ 3600. The luminaire body shall be painted with exterior grade of poly - Urethane/polyster quoting in required colour shade. LED CCT should be 3000K ingress protection IP 65, power rating 230 Volts, AC 50 Hz. LED Make: Everlite/ MSL (NS)

Sh Anand Contractor

The New Dhiman Coop L&C Society Ltd.