Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
4 Nov 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Roof Covering with Allied Civil Works for Weigh Bridge at ACD, HAL HC.
9873
TENDER NOTICE/NCP/31/24-25/04
Works
Contract Section Civil-FMD-Bangalore
₹0
₹50,000
4 Nov 2024
3 Oct 2024
3 Oct 2024
4 Nov 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
Address for correspondence:
PAN No.:
Service Tax Registration No
Goods and Service Tax ID No.
Contact details
Please Enter Contact person Name
Pls Enter Mobile No
Registered Contractor
Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender]
TURN OVER IN Rs.
Pls Enter Turn over in Rupees for all the 3 years
ESI & PF Nos with proof
Remarks if any
Bank(s) details: [Copy of the cheque leaf to be uploaded]
Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission
Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs
Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Please enter Details for Work No 1
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No II
work done
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Pls Enter Details for Work No III
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to eProcurement Portal
Pls Enter Details for Person holding Power of Attorney
DECLARATION I
DECLARATION II
Pls Accept the Delaration II
Specification
Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.50m in width as well as 10Sq m on plan including getting out and disposal of excavated earth upto 50m and lift upto 1.50m, etc., all complete as directed by Engineer-in-Charge.
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.50m, etc., all complete as directed by Engineer-in-Charge.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas in all kinds of soft / hard soil for foundations, footings, column pedestals or members as per the drawing etc., (exceeding 30cm in depth, 1.50m in width as well as 10Sq m on plan) including removal of vegetation and in-equalities, shoring, strutting for protecting the sides of foundation if required, removing slips or falls in excavation, forming steps in sides of deep excavations and their removal or covering up, levelling, ramming the bottom of excavation, getting out and disposal of excavated earth lead upto 50m and lift upto 1.50m with all labour, tools & tackles, plant & machinery, hire & fuel charges, etc., all complete as directed by Engineer-in-Charge.
Excavating holes in all kinds of soil more than 0.10Cu m & upto 0.50Cu m including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc, disposing of surplus excavated soil, as directed within a lead of 50m and lift upto 1.50m, etc., all complete as directed by Engineer-in-Charge.
Construction of granular sub-baseWith material conforming to Grade-III (size range 26.50mm to 0.075mm) having CBR Value-20 by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications, etc., all complete as directed by Engineer-in-Charge.
Demolishing cement concrete of any description in grades (1:3:6) or rich mix manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge
Supplying, mixing and placing in position plain cement concrete 1:4:8 (1 cement : 4 sand : 8 graded aggregate of 40mm nominal size) including Vibrating / consolidation and curing for plinth, cills, bed blocks and coping, etc., all complete as directed by Engineer-in-Charge.
Supplying, fabrication and fixing in position as per approved make and design TMT bars as reinforcement cut to length, bent to shape required, cranking, hooking ends, etc., including binding with (soft drawn) MS wire etc., for all works above and below the plinth level, etc., all complete as directed by Engineer-in-Charge.
Providing and laying in position ready mixed or site batched M30 Grade with minimum cement content of 350Kgs / m3 design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland / Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts; but excluding the cost of centering, shuttering, finishing and reinforcement, etc., all complete as directed by Engineer-in-Charge. Note: (i) Mix design to be obtained from Govt. / NABL laboratory for site batching concrete.
Providing and laying (RMC) design mix cement concrete of M-30 grade, in roads / taxi tracks / runways, using cement content as per design mix, using coarse sand and graded stone aggregate in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope / camber finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction / expansion, construction & longitudinal joints (10mm wide x 50mm deep) or suitable size by groove cutting machine, providing and filling joints with approved joint filler and sealants, etc., all complete as directed by Engineer-in-Charge. (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340Kgs / Cu m.
Providing and filling in position rubberized bitumen hot sealing compound for sealing for dummy joints / expansion joints / contraction joints in roads / pavements all complete as per direction of the Engineer-in-Charge. The rate shall include for cleaning the joints, providing backer rod in the joint, application of primer in the joints and sealent shall be of 10mm i.e 1cm (W) X 10mm i.e 1cm (D), etc., all complete as directed by Engineer-in-Charge.
Form work by providing Timber / M.S sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways dressing with oil including M.S bolts nuts and washers, temporary openings filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including removing the same from the site after completion of work, etc., complete all as directed for following works. (Form work material contractors own property and shall be removed after completion of work. For edges of concrete flats, breaks in floors, openings in concrete walls/floors/roofs and sides of RCC/PCC bands in walls, drain wall, horizontal or sloping.
Structural steel work in single section like ISMB, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as directed by Engineer-in-Charge.
Structural steel work like ISA, MS Plate, MS bolt, etc., riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing precoated galvanised iron i.e Pre-Painted Galvalume profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-Charge. The sheet shall be fixed using self drilling /self tapping screws of size [5.50 x 55]mm with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces / ridge pieces, etc., excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, etc., all complete as directed by Engineer-in-Charge.
Providing and fixing G.I. chain link fabric fencing of required width in mesh size [50 x 50]mm including strengthening with 2mm dia wire or nuts, Made of G.I. wire of dia 4mm, bolts and washers as required, etc., all complete as directed by Engineer-in-Charge.
Painting Steel surfaces of any description with two coats of synthetic enamel paint of approved colour, brand and manufacture to give an even shade, including preparation of surface by rubbing with fine grade of abrasive paper to ensure smooth, etc., all complete as directed by the Engineer-in-Charge.
Brick work with common burnt clay machine moulded modular bricks of class designation 12.50 in exposed brick work(200mm / 100mm) thick above plinth level including making horizontal and vertical grooves 10mm wide 12mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand), etc., all complete as directed by Engineer-in-Charge.
Plastering to external brick/block wall with 18mm cement plaster in two coats under layer 12mm thick cement plaster on the rough side with cement mortor 1:5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement : 6 fine sand) including leveling, curing and making the level smooth and at all heights, etc., all complete as directed by Engineer-in-Charge.
Disposal of moorum / building rubbissh / malba / simillar unserviceable, dismantled or waste material by mechanical transport for lead up to 10km for all lifts, etc., all complete as directed by Engineer-in-Charge.
Rupees Twenty One Lakh Twenty One Thousand Five Hundred One and Seventy One Paise Only
Approximate Amount Put to Tender
Rupees Three Lakh Eighty One Thousand Eight Hundred Seventy and Thirty Paise Only
Rupees Twenty Five Lakh Three Thousand Three Hundred Seventy Two and Two Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN31.pdf
TENDER_DOCUMENT • 1.23 MB
68PQ.pdf
TENDER_DOCUMENT • 0.21 MB
68ECSForm.pdf
TENDER_DOCUMENT • 0.48 MB
68PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
68PB.pdf
TENDER_DOCUMENT • 0.31 MB
68Checklist.pdf
TENDER_DOCUMENT • 0.19 MB
68PBF.xlsm
TENDER_DOCUMENT • 0.03 MB
Amendment.pdf
TENDER_DOCUMENT • 0.09 MB
68TB.pdf
TENDER_DOCUMENT • 2.55 MB
68TenderDrawing.pdf
TENDER_DOCUMENT • 0.30 MB
68Undertaking.pdf
TENDER_DOCUMENT • 0.57 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .