REPAIR REPLACEMENT OF WOODEN JOINERY ALUMINIUM JOINERY FOR CELL NO 1 AT NOFRA UNDER GE (NW) NOFRA COLABA MUMBAI

Amount

Note : 1. The tenderer shall note that before quoting his unit rate, all items of works shall be executed in high rise building (16th floor building) & including provision of necessary scaffolding & safety measures. (a) Uniform for all deployed staff in duty supervisor as approved by GE. (b) Functional tools & plants shall be carried by tradesman all time for attending any site. (c) Necessary ladder / cloth or any other material reqd. (d) Debris / site clearance immediately before leaving site. (e) Safety eqpt to be carried all time. (f) Scaffolding wherever reqd deemed to be included in quoted rates. (g) A team will consist of 02 person will daily report to JE/AGE (h) Reduction of team can be done only with written permission of concern AGE. (j) In case of non-adherence of any of above fine/ penalty to be carried as under:- (i) 1st Time - Rs 200/- (ii) 2nd Time - Rs 500/- (iii) 3rd Time - Warning to contractor. (k) In case of 3 warning to contractor, it will be reflected in WLR for slow progress.

Taking down chowkhat or frame exc 1.5 Sqm but not exc 4 Sqm each without taking off shutter of any discription complete all as specified and as directed.

Taking down chowkhat or frame n exc 1.5 Sqm each without taking off shutter of any discription complete all as specified and as directed.

Taking down of shutters of any description n exc 1 Sqm each of any description complete all as specified and as directed

Taking down of shutters of any description exc 1 Sqm and n exc 2 sqm each of any description complete all as specified and as directed

Supply and Fix II class HW plain solid straight chowkat and framed wrought framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

Supply and Fix 40mm thick II class HW pannel framed shutter of (any number of panels) with panels of timber flat on both sides (feather edged ) or of veneered particale board medium density, wood particale board with commercial face veneers complete all as specified and as directed.

Supply and Fix 35mm thick IInd class hard wood factory made glazed and skelton shutters open rebated and prepared to receive gauge/glass cut and metered beads and divided into square with plain chamfered or rounded metered and rebated sash bars any numbers size of members of shutters for doors, windows and ventilator complete all as specified and as directed.

Supply and Fix 40mm thick flush shutters, solid core, construction, with block board core and both faces covered with decorative face veeners with lipping / frame to match complete all as specified and directed.

Supply and Fix 30mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass/gauge cut and metered beads and divided into square with plain chamfered or rounded metered and rebated sash bars any numbers size of members of shutters for doors, windows and ventilator complete all as specified and as directed

Supply and Fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side. Panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement adhesive etc complete as specified and directed and sample shall be approved by GE.

Supply and Fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube fixing in existing opening including necessary hold fast and filling concrete all and as specified and directed and sample shall be approved by GE.

Supply and Fix Aluminum alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and as directed

Supply and Fix stainless steel butt hinges of size 100mm complete all as specified and directed.

Supply and Fix 75mm size stainless steel, butt hinges type B-22 complete all as specified and as directed

Supply and Fix Aluminium alloy anodised barrel tower bolt 100mm long complete all as specified and as directed

Supply and Fix Aluminium alloy anodised barrel tower bolt 150mm long complete all as specified and as directed

Supply and Fix extruded aluminium alloy handle fabricated type anodized 100mm long complete all as specified and as directed

Supply and Fix extruded aluminium alloy handle fabricated type anodized 150mm long complete all as specified and as directed

Supply and Fixed in repairs 75mm size stainless steel butt hinges all as specified and directed

Supply and Fixed in repairs 100mm size stainless steel butt hinges complete all as specified and directed.

Supply and Fixed in repairs Aluminum anodized barrel tower bolt of extruded section 200mm long fixed with SS screws complete all as specified and as directed.

Supply and Fixed in repairs Aluminium alloy anodised barrel tower bolt 100mm long fixed with SS screwscomplete all as specified and as directed

Supply and Fixed in repairs Aluminium alloy anodised barrel tower bolt 150mm long fixed with SS screws complete all as specified and as directed

Supply and Fixed in repairs extruded aluminium alloy handle fabricated type anodized 100mm long fixed with SS screws complete all as specified and as directed

Supply and Fixed in repairs extruded aluminium alloy handle fabricated type anodized 150mm long fixed with SS screws complete all as specified and as directed

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed

Material and Labour 6mm thick ply wood, grade BWR, type BB fixed with screws to timber frame work for cupboards complete all as specified and as directed.

-Ditto- as per item No 28 here-in-before but 12mm thick ply wood complete all as specified and as directed.

-Ditto- as per item No 28 here-in-before but 18mm thick ply wood complete all as specified and as directed.

Material and Labour 0.9mm thick decorative laminate type 1, of surface finish, colcur and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and as directed.

Supply and Fixed in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished fixed in repairs complete all as specified and as directed

Hacking out old broken glass (any thickness, size,quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and as directed

Supply and Fix 5.5 mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads in each pane complete all as specified and as directed

Supply and Fix 3 mm thick one side ground or obscured or frosted glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5 Sqm in each pane complete all as specified and as directed

Supply and Fixed in repairs Aluminium wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden/ aluminium beads complete as specified and directed by Engr-In-Charge. [Note:- Cost of aluminium beads and neoprene included in relevant item of aluminium windows/doors/ ventilators.]

Supply and Fixed in repairs Aluminium wiremesh 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beads complete as specified and directed by Engr-In-Charge.

Supply and Fixed in repairs Aluminium wire cloth 0.45 mm nominal dia of wire and average width of operature 1.40mm and fixed to aluminium Vent/window all as specified and directed Engr-in-charge. [Note:-cost of aluminium beads and neoprene included in relevant item of aluminium window)

Material and Labour for preparation of new wooden surfaces of any description exc 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and as directed.

Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 sqm each complete all as specified and as directed

Ditto item No 40 here-in-before but exc 1 sqm and n.exc 2 sqm complete all as specified and as directed

Material and Labour for powder coated Aluminium frame and shutter for sliding windows & ventilators (movable louvers type) with one or more rebates including joining cleats for fixing etc. Rubber gasketting all round the panels/ shutters to fix glass, PVC gasketting in all channels, locking arrangement, (minimum thickness of powder coating 60 micron for windows and ventilators with natutal matt fininsh) including taking down complete complete all as specified and directed. [Note :- (i) Glass to be measured and paid separately under respective of work. (ii) Items shall be paid as per weight of aluminium section. (iii) The quoted rate shall be inclusive of rubber gasket/ PVC gasket, glazing clips, aluminium beads, neoprene and screws etc as required which shall not be measured for arriving the weight. (iv) The rate shall be inclusive of the locking arrangement including complete packing with silicon gel arround contacting surface of aluminium work]

Supply and Fixed in repairs anodised aluminium door, window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, neoprene, screws etc. complete all as specified and directed.

Supply and Fixed in repairs aluminium anodised grill (thickness of anodising minumum 15 micron) with and including suitable aluminium anodized 'F'/ 'H' section frame 23.40 x 15.30 x 1.40 mm thick with aluminium rebated/ screwed attachment complete all as specified and directed in following situation :- (Note :- (i) Aluminium grill shall be of 'Deco grill' of as per Design No. DG102, 7.50 mm x 6 mm and weight shall not be less than 3.131 Kg/ Sqm or approved design.

Supply and Fixed in repairs aluminium decorative type powder coated brackets suitable for 20mm dia curtain rod or similar articles and complete all as specified and as directed.

Supply and Fixed in repairs 20mm dia aluminium decorative type powder coated curtain rod or similar articles and completed all as specified and directed by Engineer in charge.

Supply and Fixed in repairs door stopper aluminium anodized white dale 40mmx40mm and 2mm thick dia 150mm having rubber bash 25mm dia long (high) at end the sheet/fixed to door shutter with steel cadmium places scrrew complete all as specified and as directed

Supply and Fixed in repairs 100mm long hasp and staple safety type aluminum anodised with mild steel hinge pin including bolt to hinges plate and fixed screws complete all as specified and as directed.

Supply and Fixed in repairs stainless steel aluminium anodised towel rail 20mm dia D type 60cm long between flanges complete all as specified and as directed.

Supply and Fixed in repairs night latch seven levers suitable for 35mm to 45mm thick doors in repairs complete all as specified and as directed.

Taking down cement plaster on brick wall including raking out joints, hacing for key, scrubbing down with water, etc. complete all as specified and as directed

Material and Labour Rendering in cement mortar 1:6, 15mm thick on fair face of brick work and finised even and smooth without using extra cement at any posotion complete all as specified and as directed

Preparation of new plastered or unplastered surfaces and apply two coat of oil bound distemper on wall over a coat of primer complete all as specified and directed.

Material and labour for preparing the old decorated surfaces of walls and applying two coats of white wash complete all as specified and as directed.

Material and Labour for Polished granite stone slab 20mm thick (table rubbed and polished) in steps, jambs, pillar, window cills, cooking platform and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture pigment to match with shade of granite including moulding at front edge including dismantling complete all as specified and as directed as in platforms. [Note :- Quality of granite all as approved by GE].

Material and Labour for Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10mm thick backing coat in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement match to existing including dismantling complete complete all as specified and directed.

Material and Labour for Metal frame suspended 12.5mm thick gypsum false ceiling including metal perimeter channel of size 0.50mm thick(having one flange of 20mm and another of 30mm and web of 27mm) along with the perimeter of ceiling, screw fix to block/brickwall/partition with the help of nylon sleeves then suspending with metal intermediate channel of size 80mm thick with two equal flanges each 15mm from the sofit at 900mm c/c with help of sofit cleats and Rawl plug etc including dismantling complete all as specified and directed

Supply and Fix MS framed work as in grills, gratings , etc. With ends of bars shouldered/welded or riveted or forged into spikes framed guard bars, grills, barred iron doors, ladders, framed balusters, walkways, railings, and similar works confirming to FE 290 Gde E 165 including dismantling complete complete all as specified and directed.

Material and Labour for preparation of new steel surfaces of any description and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and as directed.

Supply and Fixed in repairs PVC cabinet mirror of size 300 x 450 mm complete complete all as specified and directed.

Supply and Fixed in repairs stainless steel plate rack of size 900X580X210 mm fixed to wall with screws complete all as specified and directed.

Supply and Fixed in repair telescopic channels,power coated with ball bearings,suitable for sliding SS kitchen bracket 60 cm long long standard width,fixed over 2 nd class hard Wood rectangular fillet sectional area exc 3 & n exc 6 sqcm, clean swan secured with screws and the fillets fixed on cuddapah stone with screws ,complete all as specified and as directed.

Shivam Enterprises

K.C.P ENTERPRISES

jkconstruction

Anil Industrial Corporation

SHRI SAI ENTERPRISES

NATH CONSTRUCTION

SHREE JAGDISH FURNITURE CO.