01/EDC(G)/2021-22

33KV 3x300 sq mm XLPE cable

33KV 3x120 sq mm XLPE cable

33KV O/Door C/J kit 3x300 sq mm

33KV O/Door C/J kit 3x120 sq mm

33KV ST/Th C/J kit 3x300 sq mm

ST Pole 11 Mt Long

33KV Pin Insulator with GI Pin

11KV Disc Insulator B &S. Type

Disc Fittings B & S Type

G.I. Pipe 6" Dia

Top chanel 125X65MM with clamp

Droper chanel

T-off chanel

11/0.4 KV 100 KVA T/F

11/0.4 KV 25 KVA T/F

33KV 3x185 sq mm XLPE cable

33KV 3x120 sq mm XLPE cable

33KV ST/Th C/J kit 3x185 sq mm

33KV ST/Th C/J kit 3x120 sq mm

ACSR Rabit conductor

11 KV Pin insulator with Pin & Nut

11 KV Disc insulator with fitting

11 Kv Top chanel holding clamp

11 Kv Droper chanel holding clamp

11 KV fuse set

Sub station base angle

G.I. Pipe 6" Dia

LT PVC cable 1x250 sq.mm

STP 09 M. Long

AB cable (3x120+1x95+1x16 sq.mm)

AB cable (3x95+1x70+1x16 sq.mm)

Distribution box 3 Phase.

Pearcing connector

L.T. Clamp with I-Hook.

Dead-end clamp.

M.S. Bolt & Nut off size.

Stay Set Complete.

Aluminum Lugs 1x250

Fabrication & erection of single pole support for 33 KV & 11 KV & LT(for proper hight) line on 11 M long ST Pole with fixing of necessary clamp & other accessories like 1 no. T-off Channel, Clamp, Danger board, Nut & Bolt including electrode earthing, barbed wire, I-hook clamp, I-hook etc. its grouting in ratio 1:4:8, plinthing 300 mm above ground level (All the materials for fabrication shall be arranged by the contractor as per RESPO norms)

Fabrication, erection of double pole for 33KV & 11 KV cable exposure on ST. Pole 11 Mtr long with fixing of necessary clamp, Top/T-Off channel, angle 33 & 11 KV Pin & pin insulator making double ckt 3 phase 3 wire bus bar for separate cable with single core cable including electrode earthing, no plate,danger boared, barbed wire complete in its grouting in ratio 1:4:8, plinthing 300 mm above ground level, all repect as per RESPO Norms.(All the material for fabrication shall be arranged by the contractor)

Erection of Single pole for L.T line on 9 Mtr. ST Pole with fixing of necessary clamp & other accessories I hook clamp, I Hook, Nut Bolt & other necessary accessories,including electrode earthing, its grouting in ratio 1:4:8, plinthing 300 mm above ground level, (All the materials for fabrication shall be arranged by the contractor as per RESPO norms)

Laying of Double circuit 33 KV 3x300 XLPE sq.mm Cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. the two cables should be seprated by a partition of single bricks (All the material required for laying will be supplied by the contractor except 33 KV XLPE cable)

Laying of Double circuit 33 KV 3x120 XLPE sq.mm Cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. the two cables should be seprated by a partition of single bricks (All the material required for laying will be supplied by the contractor except 33 KV XLPE cable)

Laying of Double circuit 11 KV Sq mm 3x185 XLPE sq.mm Cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. the two cables should be seprated by a partition of single bricks (All the material required for laying will be supplied by the contractor except 11 KV XLPE cable)

Laying of Double circuit 11 KV Sq mm 3x120 XLPE sq.mm Cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. the two cables should be seprated by a partition of single bricks (All the material required for laying will be supplied by the contractor except 11 KV XLPE cable)

Hoisting of 33 KV / 11 KV of difference size cable on existing/erected double pole including MS pipe 3 mtr long 6'' dia including jumpering,dressing of cable with required all necessary clamps and nut, bolts (where is required).

Heat Shrinkable jointing kit for 33 KV 3x300mm2 XLPE cable outdoor

Heat Shrinkable jointing kit straight throught for 33 KV 3x300mm2 XLPE cable

Heat Shrinkable jointing kit for 33 KV 3x120mm2 XLPE cable outdoor

Heat Shrinkable jointing kit for 11 KV 3x185mm2 XLPE cable outdoor

Heat Shrinkable jointing kit for 11 KV 3x120mm2 XLPE cable outdoor

Supply,grouting,nozzling & binding of stay set with stay clamp(All the material shall be arranged by the contractor)

Installation of tell less fuse unit on D/P or single Pole for 25/100 KVA T/F (Tell less fuse unit provided by contractor)

Laying and hosting,winding,jumpering of LT PVC cable size 1x250 cable between LT ditribution box mini & constructed overhead line with proper lugging & clamping.

Laying, Stringing sagging binding, jumpering of ABC size 3x120+1x95+1x16 sq mm with the help of susspension clapms I-hooks and proper connector & proper clamps.

Laying, Stringing sagging binding, jumpering of ABC size 3x95+1x70+1x16 sq mm with the help of susspension clapms I-hooks and proper connector & proper clamps.

Laying, Stringing sagging binding, jumpering of ACSR Rabit Conductor 3 phase 4 wire with guard wire GI 6 SWG with the help of necessary clamp and binding wire proper connector & clamps.

High Pressure testing of 33 KV & 11 KV XLPE cable. Testing equipment will be arranged by the contractor.

Placement of 11/0.4 KV T/Fs on S/S Type D/P & installation, commissioning of 100 & 25 KVA T/F including cost of L-pieces and lugs jumpering with the system ( All the required martial for above job shall be provided by contractor except T/Fs)

Painting of new erected ST pole with two coat of red oxide paint,PO red paint at top of pole 2 M & balance by two coats of best quality aluminum paint ISI of Burger/Nerolac/Asian mark as per norms.

Dismentling of Existing Pole & Line, T/F & D.P.

RECEIVED BACK OLD Conductor

RECEIVED BACK OLD AB Cable

RECEIVED BACK OLD Iron Scrap materials.

RECEIVED BACK OLD ST Pole 11 Mtr.

RECEIVED BACK OLD ST Pole 9 Mtr.

CAPITAL ELECTECH PVT LTD

M/S AARADHYA AND ADHYATM ASSOCIATES