Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹11.9 LAccepted-AOC | L-1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | L-2₹12.4 L+₹49,359.40 (4.13%)Rejected-Finance H NO 400 STREET NO 1 SAIN GHAR PATHANKOT GURDASPUR PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | L-2 | Rejected-Finance Higher side quoted amount | |
| 3 | L-3₹12.5 L+₹55,958.01 (4.69%)Rejected-Finance | L-3 | Rejected-Finance Higher side quoted amount | |
| 4 | L-4₹13.2 L+₹1.3 L (10.8%)Rejected-Finance 58 1ST FLOOR PATEL NAGAR BATHINDA | BATHINDA | BATHINDA | PUNJAB | L-4 | Rejected-Finance Higher side quoted amount | |
| 5 | L-5₹13.8 L+₹1.8 L (15.5%)Rejected-Finance | L-5 | Rejected-Finance Higher side quoted amount |
Tender Value
Refer Docs
EMD Value
₹28,650
Closing Date
4 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(W)Pathankot
GE(W)Pathankot
PROVN OF WC TOILET AND BATHROOM FACILITY AT OR MD ACCN NEAR BLDG No. T-42 UNDER GE (WEST) PATHANKOT
2023_MES_621765_1
GE/PKT-45/2023-24
Open Tender
Miscellaneous Works
Item Rate
180 days
Pathankot
As per tender and NIT doc
9 documents required · 9 mandatory
₹500
GE(W)Pathankot
₹28,650
16 Dec 2023
5 Oct 2023
6 Nov 2023
5 Oct 2023
4 Nov 2023
20 Oct 2023
Amount
Sch 'A' Part-I B/R work:- Surface excavation not exc 30 cm depth and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed
Excavation in trenches, not exceeding 1.5 m wide and not exc 1.5 m in depth for foundation, and not exceeding 10 sqm on plan for manholes, pier hole, shafts, wells, laying of pipes etc and getting out in soft/loose soil, complete all as specified. and directed by Engr-in-Charge.
Removal to excavated material (Soil) to a distance not exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.
Returning filling in including spreading, levelling, watering and well remming in layers not exceeding 25cm thick in hard/dense soil complete all as specified.
M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed
M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed
M&L for approved soil filling under the floor, spreading and levelling in layers n.exc 25cm thick, well ramming including watering as required complete all as specified. and directed by Engr-in-Charge.
M&L for hardcore of Broken stone or boulders n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.
M&L for Cement concrete Type D-2 1:4:8 (using 40 mm graded graded crushed stone aggregate) in foundations, filling and mass-concrete and sub base of floor complete all as specified. and directed by Engr-in-Charge.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed
Use and waste of formwork to sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal complete all as specified and as directed
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail?ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon?tal or sloping and similar work exc 10cm but n exc 20cmwide complete all as specified and as directed
S&F mild steel TMT bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.
All as per srl item No. 15 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M&L for RCC M-25 (design mix) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-Charge.
M&L for RCC M-25 (design mix) in Columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge.
M&L for RCC M-25 (design mix) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-Charge.
M&L for RCC M-25 (design mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge.
M&L for Fly ash brick work, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for 40 mm thick plain cement concrete type B-1 , 1:2:4 (using 20 mm graded crushed stone aggregate) finished even and smooth without using extra cement as in flooring complete all as specified and directed.
M&L for 50 mm thick plain cement concrete type B-1 , 1:2:4 (using 20 mm graded crushed stone aggregate) finished even and smooth without using extra cement as in flooring complete all as specified and directed.
M&L for Cement Concrete , 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in lintel upto 1.50 m span, cills, steps, seismic and other silmilar bands, plinth courses, sring courses,lacing courses, parapets and railings upt 60 cm in height, copings, kneelers, apex stones, bed plates, water troghs and the like including weathering, slightly rounded or camphered angles and throating, complete all as specified and directed by Engr-in-Charge.
M&L for 40mm thick DPC in cement concrete 1:2:4 type B-0 mixing with liquid water proofing admixture as per manufacturer instructions including necessary formwork complete all as specified and as directed Note:-WPC will be measured and paid separately
Supply only liquid water proofing compound all as specified and as directed.
M&L for Rendering 15 mm thick on fair face of brick work or concrete/stone surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified.
M&L for Rendering 15 mm thick on other than fair face of brick work or concrete/stone surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified.
M&L for rendering 5mm thick on fair faces of brickwork or concrete surfaces in cement mortar 1:3 as on ceiling finished even and smooth without using extra cement complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base Finishing surfaces of concrete to be even and rough complete all as specified and as directed.
M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including laid over screed bed of 15mm thick of cement mortar 1:6 all as specified and directed.
M&L for Glazed coloured ceramic tiles in vertical surface 450X 350X 7-8mm thick such as skirting dado, etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shed of tile including laid over 10mm thick backing layer of cement mortar (1:4) complete all as specified and as directed
M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in flooring, PCC path, plinth protection and surface finished even and fair with out using extra cement all as specified and as directed.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engr-in-Charge .
M&L for 3 coats of white wash on new plastered surfaces of wall including preparation of surfaces all as specified and as directed.
M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for cleaning of plastered/concrete surfaces and applying roof treatment on top of roof with APP modified membrane with non woven polyster reinforcement/mat (centre core) with thermal insulation with white minral gravel finish on upper side of weight not less than 3.5kg/sqm and thickness not less than 3mm, laid by torch application method with overlap 100mm on length side and 100mm on the width side as per manufacturer instructions over a coat of approved cold applied bituminous oil based primer (IS-3384) @0.30 ltr/Sqm and including 20 mm thick screed bed in CM 1:4 including mixed with water proofing admixture as per manufacturer's instructions and ensur water does not stand anywhere after sprinkle water on the roof surface complete all as specified and directed.
M&L for flat iron hold fast 25mmx6mm welded to angle iron door frame complete all as specified and directed.
S&F mild steel angle iron door frame 40mmx40mmx6mm confirmingto Fe 410-0 including 12mm dia deformed bars for strengthing at bottom of chowkhats including cutting floor at bottom to accommodated strengthing bars and making good the floor in PCC 1:2:4 type b-0 to match the existing floor complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified .
S&F 150mm long extruded aluminium alloy handles, cast type, anodised
S&F 200mm long aluminium anodised, barrel tower bolts of extruded section
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.
M&L for preparation of new surfaces of steel of any description , over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge .
S&F steel window/Ventilator factory made box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills made out of 10 mm dia round bars glazing with 3 mm thick oridinary glass, guaging (wire mesh stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts ) and two coat synthetic enamel paint over and including a coat of red oxide primer all as per drg No CEPZ/ TD-245/01 Sheet 1/1 and CEPZ/TD-246/01 sheet 1/2 & 2/2 complete all as specified & directed.
S&F 15 mm bore CP Bib taps cast copper alloy fancy type with capstan heads (chromium plated),and with crutch or butterfly handle, screwed down , high pressure for iron pipe complete all as spd & directed.
S&F vitreous China wash basin, white , flat back, size 550x400mm including brackets, CP brass waste fitting 32 mm dia,PVC waste pipe 750 mm long( Minimum) cutting for and pinning in ends of brackets or erecting stand including 15mm bore brass CP mixerfor mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.
S&F 15mm bore dia fancy type long sank and cup, chromium plated angular valves /stop valves, cast copper alloy, screwed down, high pressure ,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 02 nos 20mm dia tank nipple and 01 Nos 32mm dia drain plug complete all as specified in SSR Part I
S&F 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,fush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified.
S&F galvanised iron, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors in any length of 15 mm bore pipe complete all as specified and directed by Engr-in-Charge
All as per Srl item no. 51.00 here-in-before but 20 mm bore
M&L for 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane including hacking out old broken glass from wooden/steel frames complete all as specified .
S&F 100mm long butt hinges, medium weight, cold rolled mild steel
S&F 15 mm dia PVC connection of 450mm long including PTMT nuts
S&F vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to drain and to flushing pipe antisyphonage pipe, including PVC (SRW) 'P' or 'S' trap including making good to floor with cement concrete bedding complete all as specified and dirtected by Engr-in-Charge .
S&F flush pipe of polyethylene of low or high density of PVC. 32 mm dia, for low level cistern complete all as specified and as directed
M&L for PVC (SWR) gully/floor trap 110 mm with grating and 300mm long outlet, setting and jointing with solvent cement complete all as specified and as directed
S&F PVC (SWR) bends any radius of 110mm bore complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 110mm bore pipe complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall of 110mm bore pipe complete all as specified and directed by Engr-in-Charge.
S&F PVC (SWR) junction single, (single-T), equal or unequal of 110mm bore complete all as specified and directed by Engr-in-Charge.
S&F vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete, including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.
S&F Health Faucet with 8 mm dia,1.5 m long Flexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed.
S&F 20mm dia Aluminium anodised tubular towel rail 600mm long D type incl a pair brackets fixed to wall complete all as specified and directed by Engr-in-Charge.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and as directed
M&L for concrete bed to drain pipe in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) including packing under and haunching against the sides of pipe after laid and tested for 150 mm bore pipe, complete all as specified and directed by Engr-in-Charge.
M&L for unplasticized drainage pipe 160mm dia type 'B' with wall thickness 4mm of pressure rating 8KN/Sqm laid in trenches and jointed with cement solvent including testing complete all as specified and directed
M&L for Precast cement concrete block masonry type C-1, 1:3:6 (using 20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar (1:4), complete all as specified and directed by Engr-in-Charge.
M&L for 80mm thick M-40 Grade, coloured rubber moulded glossy finish Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 with grey cement and pigment including 25mm thick sand cushioning bed complete all as secified and directed.
M&L for non abrasive paving (endura) tiles 300mm x 300mm x10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15mm screed bed CM 1:4 to match complete al as specified and directed. Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles and Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.& Brushing neat cement slurry with 3.0kg of cement per sqmetre complete all as specified and directed
Sch 'A' Part-II E/M work:- M&L for point wiring for one light/one fan controlled by one switch with 1.5 Sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC concealed conduit heavy duty 20 mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed.
All as per Srl item No 73 here-in-before but for 5 pin 5 amps socket outlet on independent board complete all as specified and directed.
All as per Srl item No 73 here-in-before but for 5 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.
M&L for point wiring with 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed.
S&F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.
S&F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed.
S&F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.
S&F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.
S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed.
S&F sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as required at site or directed.
S&F LED bulb, B22 type ,14 watt,complete all as specified and directed.
S&F sleek LED Batten light fitting 4 feet long 1x22 W including LED tube 4 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as required at site or directed.
S&F LED Bulkhead fitting 10 watt with PDC aluminium housing and polycarbonate diffuser with IP-66 protection all as specified and directed by Engr-in-charge.
M&L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing propeller steel body AC ventilating fans, Single phase, 230 volts 300 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.
S&F distribution board double door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 6 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 250 volts, flush to wall / fixed on surface complete all as specified and directed
S&F MCB SP 6-32 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.
S&F MCB SPN 32 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.
S&F bldg secuirty light fitting energy saving high efficiency LED street light fitting 35 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length not less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.
M&L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 03 of SSR -2009 Part I and connecting to existing earth test point complete all as specified and directed or including testing on completion.(Note: Excavation and earth work is deemed to be included in the rates quoted).
Excavation in trenches, not exceeding 1.5 m wide and not exc 1.5 m in depth for laying of pipes/cable etc and not exceeding 10 sqm on plan for manholes etc and getting out in any type of soil, complete all as specified. and directed by Engr-in-Charge.
Returning filling in including spreading, levelling, watering and well remming in layers not exceeding 25cm thick in hard/dense soil complete all as specified.
Removal to excavated material (Soil) to a distance not exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.
M&L for brick covering with width equal to length of brick as mechnical protection to cable with well burnt sub class 'B' bricks laid as directed.
Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I complete all as specified and as directed by Engr-in-Charge. Note:-Punned thickness will be measured and paid
Supply, laying and testing LT XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 10 sq. mm 2 core complete all as specified
S&F 50 mm bore Steel water tubing 'medium grade', galvanised, with all fittings and laid in tranches complete all as specified and directed.
All as per Srl item no. 100.00 here-in-before but 25 mm bore
All as per Srl item no. 100.00 here-in-before but 20 mm bore
S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipes of 50 mm bore all as specified and as directed.
All as per Srl item no. 103.00 here-in-before but 25 mm bore
All as per Srl item no. 103.00 here-in-before but 20 mm bore
pardeep singh marwaha
Om Sai Ram Builders
M/S RUDRA CONSTRUCTION CO
M/S Raghuvanshi Builders
V K Sharma and Sons
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .