Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.9 LAccepted-Finance 12 NO 12 IRATTAI PILLAYAR KOVIL STREET NEAR REAL VALUE FLAT VELACHERY 733 CHENNAI TAMIL NADU 600042 | CHENNAI | TAMIL NADU | 600042 | L1 | Accepted-Finance LOWEST RATE QUOTED | |
| 2 | L2₹48.0 L+₹3.1 L (6.79%)Accepted-Finance | L2 | Accepted-Finance HIGHER RATE QUOTED THAN L1 | |
| 3 | L3₹48.9 L+₹4.0 L (8.86%)Accepted-Finance | L3 | Accepted-Finance HIGHER RATE QUOTED THAN L1 | |
| 4 | L4₹50.7 L+₹5.8 L (12.9%)Accepted-Finance | L4 | Accepted-Finance HIGHER RATE QUOTED THAN L1 | |
| 5 | L5₹51.2 L+₹6.3 L (14.0%)Accepted-Finance | L5 | Accepted-Finance HIGHER RATE QUOTED THAN L1 |
Tender Value
₹45.6 L
EMD Value
₹91,200
Closing Date
3 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2024_MES_664796_1
8500-127/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
As per NIT
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹91,200
Yes
10 Sept 2024
9 Jul 2024
4 Sept 2024
9 Jul 2024
3 Sept 2024
14 Jul 2024
Amount
Excavating over areas in soft/loose soil, n.exc 1.5m deep and getting out, complete all as specified and as directed.
Excavating over areas in soft/loose soil, exc 1.5 m but n.exc 3.0m deep and getting out, complete all as specified and as directed.
Removing excavated material (soft/loose soil) n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point, complete all as specified and directed
M&L for coarse Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.
M&L for Plain Cement concrete of Type C-2, 1:3:6 (using 40 mm graded stone aggregate) in surface channels and drains, complete all as specified and directed.
M&L for RCC M-25 (Design mix) using 20mm graded stone aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete, complete all as specified and as directed.
M&L for RCC M-25 (Design mix) using 20mm graded stone aggregate for Walls, retaining walls, basement walls, ballast walls and the like; any thickness etc, complete all as specified and as directed.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for rough finished flat surface of concrete, complete all as specified and as directed.
M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, for rough finished flat surface of concrete, complete all as specified and as directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed
S&F for 110 mm dia PVC (SWR) pipes single socke ted, in any length with rubber ring joints, fixed to walls , complete all as specified and as directed.
M&L for loose filling with aggregates, Broken stone or boulders of gauge 40 to 80 mm in soakage pits, soakage wells; etc, complete all as specified and as directed.
Excavating in post holes in soft/loose soil, (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,watering, and removing surplus soil to a distance n exc 50 m and making good surface, complete all as specified and directed
Surface dressing is soft/loose soil, n exc 15 cm deep, complete all as specified and as directed.
M&L for Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
M&L for Plain cement concrete 1:2:4 type B2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), all as specified and as directed.
M&L for 15mm thick in CM (1:4) rendering on brick or concrete surfaces finished even and smooth without using extra cement, with integral water proofing compound (WPC measured and paid seperately), on wall, all as specified and as directed.
M&L for preparation of newly plastered wall surfaces and applying three coat of white wash complete all as specified and as directed.
Supply only integral water proofing compound (liquid admixture) complete all as specified and as directed. (Makes : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
S&F Mild Round steel bars (Gd.1, IS-432-Part-I) 10mm dia and over, cut to length, bent to shape required, including cranking, bending, made to shape and welding with GI Pipe, complete all as specified and as directed
S&F for Rolled Mild steel Joist, Steel Round bars, channel, angle, or tee sections (Fe-410W Gde-E-250 Quality B) fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (Fe-410W Gde-E-250 Quality B) complete all as specified and as directed.
S&F for wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
S&F for Rolled Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe-410W Gde-E-250 Quality- B) complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating @150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, all as specified and as directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads (Diameter of neck 16 to 20mm) at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n.exc 10 cm long complete all as specified and as directed.
M&L for two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces, of any description not otherwise described, over 10 cm in width or girth including preparation of surface complete all as specified and as directed.
M/S S M ENTERPRISE (BID ID -3078399)
S.P.S. SUPPLIERS (BID ID -3078472)
M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION (BID ID -3078506)
BISWAS ENTERPRISE (BID ID -3078546)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .