Chikhalse Kusgaon Kh Ahirvade Rural Water Supply Scheme Tal Maval Dist Pune Under JJM Open Class 12640035

SUB-ESTIMATE NO : 4 Pure water Pumping Machinery From EXT. WTP Sump to EXT. MBR SProviding, erecting and giving test of submersible monoblock pump set conforming to IS 8034 and motor conforming to IS 9283,with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suita ble for working on 415 V ± 10%, 3 Ph,50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire h ydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. From EXT. WTP Sump to Ext.MBR Cap- 3 HP, Q-8.57 LPS, Head- 8m

Providing double flange sluice valve 80 mm dia confirming for IS14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.

Designing, Providing, Erecting, Testing & Commissioning 80 MM dia ,Cast Steel,D.F. Reflux valve of PN-1 rating generally conforming to IS- 5312, Part I with renewable gun metal sealing face on swing door without bypass arrangement as per detailed specifications enclosed. 200 MM DIA

Flanged Joints :- Providing and making flanged joints to flanged C.I./ M.S. pipes of all classes/specials etc. including cost of all jointing materials (rubber packing, nut bolts, etc.), labour, hydraulic testing etc. complete.150 mm dia

Designing fabricating providing erecting MS pipes and specials for cable tray supports, Drain pipes for D.G. set , Pipe works & items related to all other similar work including cutting , bending & Painting as per detailed specifications.

Providing making flanged joints to the MSDF pipes & specials as per detailed specifications 100 mm dia

Designing , Providing , erecting commissioning with test & trial of Pressure gauge of 100 mm capacity complete with Syphon tube, isolating cock etc suitable for 12 mm dia.Pipe

Chain Pully Block + travelling Trolly - 2 MT (16957+11929+6000), Providing errecting guirder pole for fixing cp & tt

Providing erecting & giving satisfactory test & trial of Fully automatic auto transformer starter as per detailed specification contractor rating 200/70/70 Amp suitable for 40 HP motors etc. complete. Including TPI

SUB-ESTIMATE NO : 10 TRIAL RUN AND MAINTENANCE OF SCHEME Commissioning, running and maintaing the scheme to its rated capacity, including providing necessary personnel such as operator, valveman,labour etc as per requirement of the scheme for a period of 1 Month together with training to the Local Body maintenance staff and handing over the scheme to local Body after completion of the above period as directed by Engineer-in-charge.

1 Run x 3.5C x 50 sq.mm AL.XLPE Armoured cable from Panel to Starter

1 Run x 3C x 16 sq.mm ALAR Cable For Capaciter

3C x 16 sq.mm Copper Submersible cable from Starter to Motor

Cable Glands & Lugs Terminatation etc

Making trench of suitable width and depth in soft soil for laying provided LT cable of 16 sq. mm & complete as per specification no. CW-EXNCTR

Supplying & erecting Galvanised cast iron plate 60 X 60 X 0.6 cm burried in speciallyprepared earth pit refilling with 40 kG charcoal & salt in alternate layers 19 mm dia. Vertical G.I. Pipe 1.5 mtr lon with funnel & mesg @ top for watering a break masonry block, C.I. cover complete with necessary length of double G.I. earth strip bolted with plate & covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to nearest switchgear with end socket as per direction & duly tested with earth tester & recording the results etc complete as per detailed specifications 4 Nos.

Supplying & erecting G.I.strips 25 X 5 mm as per datailed specifications

Providing Erecting MS Structural steel workISMB (250mmx125mm) for Installation of Pumpset

Providing tools as per detailed specifications attached.

Providing erecting internal & external Electrification to the pumphouse etc. complete.

Lettering for informatory sign boards etc. complete.

Providing and supplying ISI standard D.I. specials & fittings with sealing rubber gasket of S.B.R.,complete with Cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores / site, loading , unloading excluding GST levied by GOI & GOM in all respect etc.complete as per IS 9523. 80 to 300 mm Dia

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.

Providing double flange sluice valve confirming for IS14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. 125 mm dia for washout

Providing and supplying Kinetic Double Orifice type Air Valves confirming to IS 14845 as per MJP’s standard specifications combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including insurance, third party inspection charges, loading, unloading, transportation upto departmental stores,excluding GST levied by GOI & GOM in all respect etc. complete. Kinetic Air Valve Flanged Type - PN -1 40 MM

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, hard murum, boulders including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. ( Average rate 150+ 170 +192= 170.66 & Add 10% forHilly area = 187.73)

Excavation for foundation / pipe trenches in Soft rock, hard rock, including blasting/chiselling, or by all means including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. ( Average rate 572+ 755 +1017= 781.33 & Add 10% forHilly area = 859.47 )

Filling in plinth and floors murum bedding in trenches with approved murumb from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction complete. Add 10% forHilly area

Lowering, laying and jointing with SBR rubber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameters in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of materials from stores to site of work, including cost of jointing materials and rubber rings, labour, giving hydraulic testing, etc. complete. (IS-5382 & 12820)150 mm. DI K-9

Hydraulic testing of C.

I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the contractor. 150 mm. DI K-9

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves).Air Valve Single Ball (PN-1 and PN - 1.6)50 mm.

Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete, 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer -in- charge for following diameters of pipe lines (type design attached.)upto 150mm

Providing and laying in situ Cement Concrete of trap / granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)M-150

Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire).Tor Steel

Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete.125 mm dia for washout

Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. c) As above of 60x90cm internal size and depth upto 120 cm with Precast RCC slab coner

Month

SUB-ESTIMATE NO : 02 RAW WATER RISING MAIN Providing DI pipes (push on joints pressure pipes of C.I of following class and diameters confirming to the I.S.specification inclusive cost of jointing materials(Rubber gasket of EPDM Quality) Excluding GST lived by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store/site of work,unloading, stacking etc. completed as directed by Engineer –in-charge (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition / revision with amendments for Rubber Gaskets.150 mm. DI K-9

SUB-ESTIMATE NO : 01 RAW Water Pumping Machinery from EXT. Well to EXT.WTP Openwell Submersible Pumpset : Providing,erecting and giving test of submersible pump set conforming to IS 8034 and motor conforming to IS 9283, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply, with cable guard, thrust carbon/fiber bearing to withstand entir

Providing and fixing 50 mm x 50 mm Mild Steel square pipe framed steel windows of various sizes as per details with welded square bars 12 mm at 10 cm center to center without hot dip zinc coating without / with ventilator including fabrication, glazing with plain /obscured glass panes 5 mm thick of approved type and quality, all fixtures and fastenings and finishing with one coat of primer complete

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing sand faced plaster externally in cement mortar using Kharsalia / Kasaba or similar type of sand, in all positions including base coat of 15mm thick in C.M. 1:4 using waterproofing compound at 1kg.per cement bag, curing the same for not less than 3 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in C.M. 1:4, finishing the surface by taking out grains and curing for fourteen days, scaffolding etc. complete. Spec. No. : Bd.L.7 Page No. 369

Providing & applying washable oil-bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) complete. Spec. No. : Bd.P.5 Page No. 413

Providing and applying two coats of Exterior acraylic emultion paint confirming to corresponding I.S of approved manufacture and of approved colour to the plastere surfaces including cleaning,preparing the plaster surface,applying primer coat,scaffolding if necessary,and watering the surface of two days etc complete

Supply of filter media Supply of filter media fine quality sand from any source having size 0.45 to 0.70 and uniformity co efficient within the limit of 1.3 to 1.7 within premises as per I.S. 8419 part 1 of 1977 including transportation , loading , unloading ,sacking etc complete.

Painting letters upto 20 cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete. Spec. No.: MORTH 805

Providing and fixing New A 287 Gear Box assembly for Flocculator at WTP As per Previously Approved Rate by SE(M) Office, Thane

Providing, erecting and giving test and trial of Foot Mounted TEFC motor 1500 RPM, squirrel cage induction motor, conforming to IS 12615:2011 of efficiency class IE3 premium having continuous rating suitable for operation at 415 Volts +/-10%, 3 Phase, 50 Hz +/-3% with "F" class insulation. 2HP

Supplying and erecting DOL starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil and over load element with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. DOL Starters Upto 7.5 HP

MS Structural steel work for new Flash Mixture Agitator

Dismantling and Removing of Old Flash MixtureAgitator, Erection of new Flash Mixture Agitator OnSite with help of JCB machine , Painting of Agitator with with one coat of red oxide & 2 coats of Anti corrosive Balck paint to prevent rusting, etc complete.

e hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturer's design. Antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. Submersible monoblock Pump set (with Bronze / Stainless steel(CF8M) Impeller) Horizontal Vertical - up to 3 stages. Discharge 8.90 LPS against Head - 161 Mtr, HP-40. Including TPI

Sub Work No- 2 - Repairs to Alum TCL Electrical Stirrers Agitator- Providing, erecting of Agitator's with Stainless Steel 20mm dia solid shaft & SS 310 Blades as per specification complete. For Alum-2Nos.; TCL-1No.Previously Approved Rate by SE (M) Office, Thane

Providing, erecting and giving test and trial of Foot Mounted TEFC motor 1500 RPM, squirrel cage induction motor, conforming to IS 12615:2011 of efficiency class IE3 premium having continuous rating suitable for operation at 415 Volts +/-10%, 3 Phase, 50 Hz +/-3% with "F" class insulation. 2HP

Providing, erecting and giving test and trial of Foot Mounted TEFC motor 1500 RPM, squirrel cage induction motor, conforming to IS 12615:2011 of efficiency class IE3 premium having continuous rating suitable for operation at 415 Volts +/-10%, 3 Phase, 50 Hz +/-3% with "F" class insulation. 1.5HP

Repairs to Main Panel Board of Chemical house including replacement of 32 A MCB, 32 A TP MCBs Switches, Voltmeters, Ammeters, Indication Lamps, Push Buttons internal wiring etc complete

Chain Pulley Block- Providing, erecting triple spur gear type Chain Pulley Block suitable for capacity as below with 6 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per IS 3832 carrying ISI mark. 1 Tonne capacity. For Alum Lifting arrangement

UPVC Piping with Isolating Valves -Supplying and erecting testing of UPVC piping of 40mm dia. For Outlet/ Overflow & 16mm for Inlet wi

th 6kg/cm2 pressure rating for Alum & TCL Tank Inlet/ Outlet/ Overflow etc with holes drilled on it as per specifications. For Alum & TCL

Sub Work No- 3 - Servicing of Gates. Complete Removing, Dismantling, Repairs, Servicing & Overhauling and Re-erection , giving satsifactory Test & Trial of Gates of Flocuulator, Filter Bed, etc of different sizes complete

HeadStock- Providing, erecting & testing of Head Stock with GI/MS Pipe Shaft, Hand wheel for Sluice Valves of Pipe Gallery to operate on Operating Plateform etc complete

Complete Dismantling, Disassembling, Repairing, Servicing & Overhauling to varous Sluice Valve at Pipe gallery & Wash Water Drain of Filter

Sluice Valve- Providing, erecting, testing & commissioning of Glandless D I D.F. Sluice valve of 150 mm dia & class PN 1.0 rating generally conforming to IS- 5312, Part I without bypass arrangement as per detailed specifications For Pure water filter outlet in Filter Pipe Gallery

Sub Work No- 4 - Wash Water Pumpset 5HP. Providing, erecting and giving test of Centrifugal Monoblock pump set conforming to IS 9079 operating at 2900 RPM with CI impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type. Pump set shall be suitable for working at various discharge and head requirements. Pump shall be erected on Provided C.C. foundation block with suitable foundation bolts grouted in C.C. foundation block Discharge 43200 LPH against Head - 20 Mtr, HP-5.0

Providing, erecting, testing & commissioning of Glandless D I D.F. Sluice valve of 80 mm dia & class PN 1.0 rating generally conforming to IS- 5312, Part I without bypass arrangement as per detailed specifications

Providing, erecting, testing & commissioning of D.F. Reflux valve of 80 mm dia &class PN 1.0 rating generally conforming to IS- 5312, Part I without bypass arrangement as per detailed specifications

Providing & erecting GI pipe "B" class with heavy duty coupling 80mm Diameter

Providing fabicating and fixing MS Structural Steel work for necesaary Support of Panel Board, Sluice Valve, Reflux Valve, Delivery Line and Lifting arrangement etc complete per detailed specifications attached.

Sub Work No- 5 - Cables Cable- Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL. Main Panel to Alum & Floc. Panel -4 core 4 sq. mm.

For Wash Water & TCL - 4 core 4 sq. mm.

From WW panel to Pump -3 core 2.5 sq. mm

From WW panel to TCL -3 core 2.5 sq. mm

Providing Doors Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete

Providing double flange sluice valve confirming for IS14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.80 MM DIA

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984)80 MM DIA, PN 1

Providing, erecting, testing & commissioning of D.F. Reflux valve of 80 mm dia &class PN 1.0 rating generally conforming to IS- 5312, Part I without bypass arrangement as per detailed specifications

Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard 25 MM DIA, PN 1

Supplying & erecting Galvanised cast iron plate 60 X 60 X 0.6 cm burried in speciallyprepared earth pit refilling with 40 kG charcoal & salt in alternate layers 19 mm dia. Vertical G.I. Pipe 1.5 mtr lon with funnel & mesg @ top for watering a break masonry block, C.I. cover complete with necessary length of double G.I. earth strip bolted with plate & covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to nearest switchgear with end socket as per direction & duly tested with earth tester & recording the results etc complete as per detailed specifications 4 Nos.

Supplying & erecting G.I.strips 25 X 5 mm as per datailed specifications

Designing Providing erecting commissioning with test and trial of 40 mm dia PN- 1.0 rating Kinetic Double Orific type Air Valves as per MJP's standard specifications having small orific elastic ball resting on agun metal orific , nipple, large orific, vulcantile ball seating on 40 mm dia PN 1.6

Designing , Providing ,erecting commissioning with test & trial of Pressure gauge of 100 mm capacity complete with Syphon tube, isolating cock etc suitable for 12 mm dia.Pipe

Supplying & erecting automatic control panel for 3 Ph, 415 volt, a.c. Submersible/centrifugal pump set upto 30 HP consisting of Star Delta starter having relay range 30-50 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc. 3 HP

Cable Glands & Lugs Terminatation etc

Cables :- Providing erecting commissioning of cable 1 Run x 3.5 C x 120 sq.mm AL.XLPE Armoured cable from MSEB to Mains to Panel (Underground laying of Cable)

SUB-ESTIMATE NO : 03 UNCONVENTIONAL WATER TREATEMENT PLANT CAP. 1.0 MLD Removing filter media sand from existing filter beads per standard specification as required and as directed by the Engineer - in charge including all labour , tools and plants etc complete. Used Rate for Desilting Item

Providing and supplying ISI standard D.I. specials & fittings with sealing rubber gasket of S.B.R.,complete with Cast iron follower gland and M.S. nut & bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of all labours and materials and transportation to stores / site, loading , unloading excluding GST levied by GOI & GOM in all respect etc.complete as per IS 9523. 80 to 300 mm Dia

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.

1 x 3 x 2.5 sq.mm ALAR CABLE FOR CAPACITOR

Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes 5 mm thick and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete.

3C x 2.5 sq.mm Copper Submersible cable from Starter to Motor (12-4-8)

Providing double flange sluice valve confirming for IS14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.125 mm dia for washout

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, hard murum, boulders including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.( Average rate 150+ 170 +192= 170.66 & Add 10% forHilly area = 187.73)

Lowering, laying and jointing with SBR rubber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameters in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of materials from stores to site of work, including cost of jointing materials and rubber rings, labour, giving hydraulic testing, etc. complete. (IS-5382 & 12820)150 mm. DI K-9

Hydraulic testing of C.

Excavation for foundation / pipe trenches in Soft rock, hard rock, including blasting/chiselling, or by all means including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.( Average rate 572+ 755 +1017= 781.33 & Add 10% forHilly area = 859.47)

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves).Air Valve Single Ball (PN-1 and PN - 1.6)50 mm.

Filling in plinth and floors murum bedding in trenches with approved murumb from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction complete.

Providing and laying in situ Cement Concrete of trap / granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)M-150

Providing and fixing in position steel bar reinforcement of various diameters for RCC piles, caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire).Tor Steel

Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete.125 mm dia for washout

Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. c) As above of 60x90cm internal size and depth upto 120 cm with Precast RCC slab coner

Gear Box- Providing, erecting and giving test and trial of Gear Box for Alum & TCL agitation SA200 (GearRatio15:1) For Alum+TCl Market Rate ; (23150*1.1*0.55*1.28)*1.05+200 = 19024/-

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.

Providing & Supply of HDPE & GI Special, Fittings shall be inclusive of all cost such as testing, including all statutary duties and taxes such as GST levied by Gol and GoM in all respect, inspection charges, transportation up to site, transit insurance loading, unloading, stacking etc. complete. Provided 10%of Pipe Cost

Providing and supplying double flange sluice valves confirming for IS 2906/14846 including warn gear arrangement as per test pressure stainless steel spindle caps taxes transportation levied by GOI & GOM in all respect etc.complete Without by pass arrangement - PN -1 A)Sluice valve PN-1.0 (without by pass arrangement) 100 mm dia

Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and qualityof following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. 32 mm dia

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, hard murum, boulders including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.( Average rate 150+ 170 +192= 170.66 & Add 10% forHilly area = 187.73)

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, hard murum, boulders including removing the exc

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves).50 mm.

Providing and laying in situ Cement Concrete of trap / granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)M-150

avated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.( Average rate 150+ 170 +192= 170.66 & add 10% for hilly area = 187.73).

Excavation for foundation / pipe trenches in Soft rock, hard rock, including blasting/chiselling, or by all means including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.( Average rate 572+ 755 +1017= 781.33 & Add 10% for Hilly area = 859.47)

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves).50 mm.

Providing and laying in situ Cement Concrete of trap / granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)M-150

Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting / electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II For all classes. 90 mm

Lowering, Laying and Jointing GI. pipes in proper position including all specials by compression fitting / electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. 100mm. GI Medium

Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position..90 mm

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves).Air Valve Single Ball (PN-1 and PN - 1.6)50 mm.

Hydraulic testing of GI pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 100mm. GI Medium

Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum)PCC - M-150

Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. c) As above of 60x90cm internal size and depth upto 120 cm with Precast RCC slab coner

Cables :- Providing erecting commissioning of cable 1 Run x 4 C x 6 sq.mm AL.XLPE Armoured cable from MSEB to Mains to Panel (Underground laying of Cable) (7-1-27)

Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:2:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion12mm thick cement plaster in CM 1:4 proportion on both sides, CC 1:2:4 15cm thick for coping and providing and fixing SFRC manhole frame and cover, etc. complete as directed by Engineer-in-charge. As above of 0.9m X 0.9m internal size and depth upto 1.2M.

Providing and supplying ISI standard welded DI double flanged pipe excluding GST levied by GOI & GOM in all respect, railway freight, insurance, unloading from railway wagon, loading into truck transport to store / site, unloading, stacking etc. complete as directed by Engineer -in- charge. (for 2.75 m bare pipe) (a) Inlet pipe 100 mm dia D.I. D/F pipes

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.

(b) Outlet pipe 100 mm dia D.I. D/F pipes

(e) Overflow pipe 100 mm dia D.I. D/F pipes

Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all re- spect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmen-tal store, unloading stacking etc. complete.

SUB-ESTIMATE NO : 05 PURE WATER RISING MAIIN FROM EXT. WTP TO EXT.MBR Providing DI pipes (push on joints pressure pipes of C.I of following class and diameters confirming to the I.S.specification inclusive cost of jointing materials(Rubber gasket of EPDM Quality) Excluding GST lived by GOI & GOM in all respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store/site of work,unloading, stacking etc. completed as directed by Engineer –in-charge (IS 1536/2001 for pipes and IS 158/1969 and IS 12820/1989 or latest edition / revision with amendments for Rubber Gaskets. 150 mm. DI K-9

Providing double flange sluice valve confirming for IS- 14846 including worn geaarrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.(b) For Outlet 100 mm dia

(c) For Washout 100 mm dia

Providing and supplying ISI standard welded DI double flanged pipe excluding GST levied by GOI & GOM in all respect, railway freight, insurance, unloading from railway wagon, loading into truck transport to store / site, unloading, stacking etc. complete as directed by Engineer -in- charge. (for 2.75 m bare pipe) (a) Inlet pipe 100 mm dia D.I. D/F pipes

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.

(b) Outlet pipe 100 mm dia D.I. D/F pipes

(e) Overflow pipe 100 mm dia D.I. D/F pipes

Providing and supplying ISI standard CI flanged / S& S specials excluding GST levied by GOI & GOM in all re- spect including railway freight, insurance, unloading from railway wagon, loading into truck transport to departmen-tal store, unloading stacking etc. complete.

Making trench of suitable width and depth in soft soil for laying provided LT cable of 16 sq. mm & complete as per specification no. CW-EXNCTR (16-1-1)

65mm. GI Medium

80mm. GI Medium

Providing and supplying ISI standard MS specials of required thickness with 3 coats of approved make epoxy paint (Shalimar, Ciba or Mahindra & Mahindra make) from inside and outside excluding all statutory duties & taxes such as GST levied by GOI & GOM in all respect, inspection charges, transportation to stores / site, and stacking, etc. complete.

100mm. GI Medium

125mm. GI Medium

Providing & Supply of HDPE & GI Special, Fittings shall be inclusive of all cost such as testing, including all statutary duties and taxes such as GST levied by Gol and GoM in all respect, inspection charges, transportation up to site, transit insurance loading, unloading, stacking etc. complete.

Providing and supplying double flange sluice valves confirming for IS 2906/14846 including warn gear arrangement as per test pressure stainless steel spindle caps taxes transportation levied by GOI & GOM in all respect etc.complete Without by pass arrangement - PN -1 50 mm dia

65 mm dia

80 mm dia

Providing and supplying Air Valves as per IS- 14845-2000 and MJP’s standard specifications of approved make and qualityof following diameters including railway freight, inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in all respect etc. complete. 32 mm dia

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, hard murum, boulders including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.( Average rate 150+ 170 +192= 170.66 & Add 10% forHilly area = 187.73)

100 mm dia

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves).50 mm.

(e) Overflow pipe 100 mm dia D.I. D/F pipes

125 mm dia

65mm. GI Medium

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, hard murum, boulders including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.( Average rate 150+ 170 +192= 170.66 & add 10% for hilly area = 187.73)

(d) For bypass arranement 100 mm dia

Providing and supplying ISI standard welded DI double flanged pipe excluding GST levied by GOI & GOM in all respect, railway freight, insurance, unloading from railway wagon, loading into truck transport to store / site, unloading, stacking etc. complete as directed by Engineer -in- charge. (for 2.75 m bare pipe) (a) Inlet pipe 100 mm dia D.I. D/F pipes

Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves).50 mm.

Providing and laying in situ Cement Concrete of trap / granite / quartzite / gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)M-150

(e) Overflow pipe 100 mm dia D.I. D/F pipes

Lowering, Laying and Jointing H. D. P. E./M. D. P. E. pipes in proper position including all specials by compression fitting / electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II For all classes.63 mm

65mm. GI Medium

Lowering, Laying and Jointing GI. pipes in proper position including all specials by compression fitting / electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. 100mm. GI Medium

Lowering, Laying and Jointing GI. pipes in proper position including all specials by compression fitting / electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. 50mm. GI Medium

Providing & Supply of HDPE & GI Special, Fittings shall be inclusive of all cost such as testing, including all statutary duties and taxes such as GST levied by Gol and GoM in all respect, inspection charges, transportation up to site, transit insurance loading, unloading, stacking etc. complete.

Providing and supplying double flange sluice valves confirming for IS 2906/14846 including warn gear arrangement as per test pressure stainless steel spindle caps taxes transportation levied by GOI & GOM in all respect etc.complete Without by pass arrangement - PN -1 50 mm dia

65 mm dia

Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position..

Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum)PCC - M-150

Hydraulic testing of GI pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciproca

Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge. c) As above of 60x90cm internal size and depth upto 120 cm with Precast RCC slab coner

ting type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 50mm. GI Medium

Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour, jointing material, including nut bolts and giving satisfactory hydraulic testing, etc. complete.50 mm dia

Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms ofhigh grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear)