EI works at newly constructed office building of Executive Engineer, Malda Mechanical Division, PHE Dte. in the district of Malda under Malda mechanical Division P.H.E Dte.

Amount

Supply & Laying of 1.1 KV Gr. 2 C 16 sq.mm XLPE Armored Cu. Cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting as directed by EIC.(As per site Requirement)

Supply & Laying of of 1.1 KV Gr. 2 core 16 sq.mm XLPE Armored Cu. Cable after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish rom 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry and Finishing the end by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials of 2 C, 16 sq mm XLPE armoured cables

Supply & Laying of 1.1 KV Gr. 2 C 2.5 sq.mm XLPE Armored Cu. Cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting as directed by EIC.( As per site Requirement)

Supplying & fixing 4Bars 415V, 63 A sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required

Supplying and fixing 63 Amp 415V Main switch with Sheet Steel enclosure on flat iron frame on wall with nuts bolts etc

S&F 415V 2 + 10 way Horizontal SPN MCBDB with double door SS enclosure (607710) with IP-42/43 protection having 1 no 40A DP isolator and 10 nos ('C' Serise 10ka) 10-32A SPMCB concealed in wall after cutting the wall & mending good the damages to, original finish incl. ionterconnection with suitable copper wire and neutral link & provision for earthing attachment as per G.S.

Supplying and fixing 2+4 way SPMCB DB with 32A DP Isolator-1no & 6 Amp-4-nos 240/415 V MCB of Breaking capacity 10kA & C characteristics with MCB enclosure and necessary connection on flat iron frame on wall as per direction of EIC.

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC (Avg Run 6mtr).

Do---------Do--------On Board.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required

4x 84/0.3 (6 sqmm) + 2 x 56/0.3 (4 sqmm) as ECC

2X56/0.3(4sqmm)+1X36/0.3(2.5sqmm) as ECC.

2X36/0.3(2.5sqmm)+1X22/0.3(1.5sqmm) as ECC.

Finishing of 1.5/2.5sqmm PVC insulated cu wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Finishing of 4sqmm PVC insulated cu wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Finishing of 6sqmm PVC insulated cu wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on GI/PVC Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V 16 A Modular type switch (Brand approved by EIC) on GI/PVC Modular type switch board having top cover plate and making necessary connections as required .

Supply & Fixing 240 V, 25A Modular type socket, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C-Curve) and 6 Module PVC Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

S&F of 240V 48" sweed BEE 5 star rating(minimum) AC ceiling fan (make Crompton Greaves-Enregion Groove Remote Anti Dust, Satin sand or equivalent model) as directed by EIC.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on Modular GI switch board with top cover plate incl. making necy. connections etc.

S&F of 240V 300mm Wall Fan (Crystal White) 3 star rating (minimum) wall fan (Make- Orient Electric Wall-11/Crompton Greaves-cool Breeze or equivalent model of orient/Usha) as directed by EIC..

S&F 240V 225 mm (9") dia 920 rpm of AC exhaust fan (Crompton, Trans Air, Reversible, grey or equivalent of Orient/Usha) incl. wall S/F louver shutter aluminium with nuts bolts washers etc. on wall and mending good the damages to original finish as per direction of the EIC.

S&F USHA 15 L Storage Water Geyser (WARMBOY, Grey), CopperPro , Whirl Flow Technology , Glass line coating , Magnesium Anode Advantage or eqivalent as per direction of EIC

Supply & delivery wireless Call bell/door bell set with separate Power Source AC Adaptor. (make-Anchor (Model-22720)/Pritam/other approved make)

Supply & Fixing Modular type RJ45 sitable for CAT6 cable (Brand approved by EIC) with PVC board and top cover plate on wall and making necessary connections as required.

Supplying & Drawing LAN cable (CAT6) (Brand approved by EIC) incl. S&F 20mm dia PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works.

Double earthing the whole installations complying with IR Rules including supplying of all necessary earthing materilas for voltage corrector device to complete the job as per direction of EIC.

Supply and Fixing single LED fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener.(Make-Philips Cat No- BN308C LED 20S-6500 L60 PSU WH or equivalent

Supply & Fixing decorative Single Head Wall light fitting (M-Philips,Model No- 31425 or equivalent) and 24/0.2 mm (1.5 sqmm) flexible copper wire all complete at Corridor.

Supply & Fixing decorative wall mounted light fitting (M-Philips ,Model No- 34034, Jojoba wall lamp silver /Havells/ equivalent) and 24/0.2 mm (1.5 sqmm) flexible copper wire all complete at Basin Wall.

Supply & Fixing decorative down light fittings (M-Philips ,Model No- Dura Slim, 15 W or equivalent) and 24/0.2 mm (1.5 sqmm) flexible copper wire all complete at recessed false celling.

S/Fixing of Chandelier at the chamber of Executive Engineer, MLMD, PHE Dte. (Make- Philips, Model No-581975 or equivalent as per direction of EIC.

Supply and fixing of street light luminarie IP 66 LM6-HPDC Housing Street light aerodynamically designed with better thermal management/ Potted driver is to be provided,the luminaire and housing should be from the same manufacturer(cat no-BRP 046 LED 36 CW MR FG S1 PSU GR) Make-Philips OR Equivalent and same techinal specification .

Fixing only outdoor light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid U-1520 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 15mm thick OW Acoustic Board (Mineral Fiber Acoustic Ceiling Tiles) of approved patern and size 595mm X 595mm with NRC value > 0.65 should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. In ground floor.

Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U?1520).

A) Supplying & laying of approved brand of scratch proof, semi flexible P.V.C. blended homogeneous marble Vinyle flooring in tiles conforming to IS:3461, fixing with synthetic acrylic adhesive after preparing the floor, levelling & smothaning when necessary with suitable putty, as per the design & instruction of the Engineer-in-charge. 2 mm thick

Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] In Ground Floor (i) 19 mm

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-in?charge.The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floorGlossy/Matt/Suede excluding surface texture or metallic lustre. thickness of laminate 1 mm

Door stopper.(Brass)

Supplying 4 lever mortice lock or any approved make and brand as per direction of the Engineer- in -Charge 150 mm

Anodised aluminium decorative handle (hexagonal / fluted) of approed quality fitted and fixed complete. 150mm plate x 10mm dia rod x 12mm hexagonal/fluted.

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark (Oxidised fittings) 75mm. X 47mm. X 1.70mm.

Supply, delivery & installation of Ceiling Fan 1200mm sweep as directed by EIC.

Supply, delivery & fitting-fixing of 18 W, 4 ft long LED Batten as directed by EIC.

MAKE AS PER DEPARTMENTAL APPROVED VENDOR LIST CIRCULATED VIDE MEMO NO.PHE/IV/2277/W-181/19 DATED- 25/09/2019

Add GST @ 18%

Add Cess @ 1%

M/S PARIMAL DAS

DAS CONSTRUCTION