Construction of New Building with development work for D7 Perarignar Anna and Bharat Ratna Dr MGR Memorial Police Station in Chennai city

Amount

1.1) Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

13.1) Filling with Excavated Earth

21.2) Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3) Supplying and fixing of Magnetic door catches

25) M.S.Holdfast

30) Ellispattern

31) Weathering course

37.1) White washing 3 coats (slaked)

39) M.s Grills

40) Painting - New "wood work"

41) Painting - New "iron work"

46) Supplying and fixing 20 mm dia Alu. Hanger Rod

47) Supplying and fixing Alu Towel rail 75 cm long

48) Supplying and fixing 5 pin Coat stand

49) Supplying and fixing chromium plated 8 gauge Picture Hook

50.3) Supply and planting avenue trees

50.4) Providing Tree guard

52.1) G.I Pipe 20mm dia for Hot water line (Fully Concealed in walls)

53.3) C.I. Steps ( 5 kg)

Electrical arrangements 72) Box type Fibre Fan hook

74) Charges for fixing of "Fan"

76) 8 SWG wire

77.3) Supplying and fixing of TV/Telephone line Socket

77.4) Supplying and fixing of 20mm dia PVC pipe for TV/Telephone line

78) Earthing Station IS3043 (Type I)

86) Anti termite treatment

238) Anticorrosive treatment for steel grills

ANNEXURE 2.15) Supplying and filling stone dust

3.1.3) C.C.1:5:10 for Foundation & Basement

3.2.1) P.C.C. 1:2:4 for Foundation & Basement and other similar works

6.2.3) Brick work in C.M. 1:5 (F& B) using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3")

8.2.3.1) Standardised concrete Mix M30 Grade Concrete a. In Foundation and basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

9.2.2) Brick work in C.M. 1:6 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") a. In Ground Floor / Stilt floor

b. In First Floor

c. In Second Floor

10.2.2) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 114 mm tk (B.P.) b. In Ground Floor/stilt floor

c. In First Floor

11.2.2) Brick partition work in C.M. 1:4 using chamber Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") 75 mm tk (B.P.) a. In Ground Floor

b. In First Floor

12.1) Brick partition in C.M. 1:4 using country bricks of size 22 x11x5cm 50 mm thick a. In Ground Floor

15.4.1) Cuddappa slab 20 mm tk.for C/B slab. a. Ground floor

b. In First floor

15.5.1) Cuddappa slab 40 mm tk.for C/B slab. a. In Ground floor

b. In First floor

18.1) Formwork using M.S.Sheet a.For Column footings, plinth beam, Grade beam, Raftbeam, Raft slab etc.,

b.Plain surfaces such as Roof slab, floorslab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

21.5.2.2) Supply and Fixing Solid UPVC door Shutter with frame

21.5.6.1) Supplying and fixing of solid core flush door shutter of thickness 35mm a). door size 1.000 m x 2.100 (Single Leaf)

b) door size 0.900 m x 2.100 (Single Leaf)

23.5) Supply & Fixing of MS door (for lockup room) Size 1000 x 2100mm

24.1) Supply & Fixing of MS ventilator of size (for lockup room) Size 1000 x600 mm

26.1) Flooring in C.C.1:5:10

27.2) B.W. in C.M. 1:4 for staircase steps Chamber burnt bricks 23 x 11.4 x 7.5 cm.

28.1) Floor plastering in C.M. 1:4, 20mm tk.

29.8.1) Glazed tiles using Grout (Tile Joint Filler), C.M 1:2, 10mm tk

29.9.1) Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler).

32.1.1) Pressed tiles (23cmx23cmx20mm) mixed with Water proofing compound

33.2) Plastering in C.M. 1:5, 12mm tk

34.2) Plastering in C.M. 1:4, 12 mm tk.

35.3) Spl. Ceiling plastering in C.M. 1:3, 10mm tk.

36.1) Cement mortar Border in C.M. 1:5, 12mm tk. b. 75 mm wide

c. 50 mm wide

38.6) One coat white cement for new walls and other similar works.

38.8) Two coat of OBD over one coat white cement for inner walls

43.2.1) Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods. (Binding wire insulated with PVC)

44.2.1.1) Rain water harvesting using defunct borewell and providing perforated cover slab a). Providing pit (M30)

b) Augering 30cm dia

44.6.1) PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe (UPVC special clamp)

45.2) Providing Colour Marble chips of size 10mm and below using 72Kgs of cement and 0.15 cum of Colour Marble chips for every 10 sqm over the existing plastered surface.

50.5.1) Supplying, Fabricating and erection of M.S Scheme Name board

51.8) Supply 40 mm dia UPVC pipes

52.1.1) Supply ,laying & jointing the following pipes as per ASTM D 1785 of schedule 40 with UPVC Specials a. 32 mm dia

b. 25 mm dia

52.4.1) c. 20mm dia UPVC water supply ASTM pipe (fully consealed in walls)

52.9) Supply and fixing of following dia MS clamp set including transportation charges. a) 40mm dia M.S clampset

53.5) Wash Hand Basin of size 550 x 400mm (White without Pedestal)

54.1.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (long body )

54.2.2) Supplying and fixing of 15mm dia Engineering Polymer Tap short body tap

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap - in G.F.

56.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade ' P' or "S' trap- Other than G.F.

57.1.1) Supplying and fixing of E.W.C.(White) 500 mm with PVC SWR grade "P" or "S" TRAP

58.3) PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

59.2.1) Gully Trap using chamber burnt bricks of size 23x11.4x7.5cm

60.1) PVC Nahani trap (4way/2way)

61.3) UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (PVC Box, Fire Retarded Box) a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point. (PVC Electrical Box )

66.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point. (PVC Electrical Box)

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS:694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS:694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.(PVC Electrical Box )

69.2) Supplying and fixing of 15 Amps 3 pin flush type plug using ( PVC Box, Fire Retarded Box)

75.2) Supply and delivery of 48" (1200 mm) Fan with ISI mark with Electronic Dimmer

77.7) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

82.3) Supply and fixing of LED road way lighting luminaries a) 25W LED

93.1.1) Plastering with CM 1:3, 12mm with WPC

96.8.2) Supply and Laying Rubber Moulded Hyraulic Pressed Paver Block 63 mm thick including labour charges for laying etc

98.5.1) TW double leaves shutter with Brass Fittings a. 1500X2100mm.(Double leaves) with Brass fittings

112.1) Supplying and fixing of Exhaust Fan 225mm dia

171.1.2) Labour charges for the erection of submersible pumpset in borewell/ openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth. Upto 5HP

171.2.8) Supply and Delivery of Submersible motor Pumpset with ISI mark IS 8034/2002 without Panel Board of 3 HP a) 50LPM x 40m (Three phase)

175.3.5) Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal)

180.2.1) Labour Charges for laying of Flat cables below ground level

207.3.8) Providing two coats of Exterior Emulsion paint including primer for outer walls

213) Supply and fixing of SFRC Manhole Cover a) 600mm x 600mm

238.1) Anticorrosive treatment for window grills

255.7.2) Supply and fixing of LED bulb. a. 9W LED bulb

344.2) Supplying and fixing of Bevelled edge mirror 500 x 400 x 5.5mm

359.3.2) Concrete designer tiles flooring

361.6) Vitrified Tiles ( Ivory ) 600 x 600 x 8mm Flooring in C.M 1:3

367.1) Providing wooden Melamine polish for new wood work.

384) Supplying and fixing of PVC flushing cistern

450) Supplying and fixing of 160mm dia PVC Tee with end cap for borewell of best approved quality with ISI mark

455.1) Supply and fixing of Health faucet approved quality with ISI mark

504) Supplying and delivery of 12 mm thick nylon rope

609.6.1) Supply and delivery of following as per IS 12818/1992 of approved quality for borewells a) 150mm OD PVC casing pipes (6kg/cm2)

b) 200mm OD PVC casing pipes (6kglcm2)

609.6.2) Supply and delivery of 150mm OD PVC Ribbed screen pipes (6kg/cm2) as per IS 12818/1992 of approved quality for borewells

609.6.3) Labour Charges for inserting PVC casing pipes assembly (with slots or without slots)

615.3.5) Supplying, delivery and fixing of 1.5 HP MS Fabricated DOL panel control board with ISI Mark for single phase

707.3.2) Supplying and laying 3 core 4 sqmm flat type copper cable with ISI mark including cost of all materials and specials.

724.5) Supply and clamping of following PVC armoured LTUG cable (Above Ground level) b) 3.5C x 25 Sqmm PVC armoured LTUG cable

724.6) Supplying and laying of following size PVC armoured LTUG cable (Below Ground level) a) 3.5C x 25 Sqmm PVC armoured LTUG cable

724.7) Supplying and fixing of brass cable gland suitable for a) 3.5 x 25 sqmm PVC armoured LTUG cable

724.8) Supplying and fixing of cable end termination suitable for a) 3.5 x 25 sqmm PVC armoured LTUG cable

799.1.1) Drilling of 150mm dia borewell anywhere including transportation from one place to another place in alluvial soil or sedimentary starta mud circulation method a) Drilling of borewell in upto 60m

799.2.1) Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the departmental officers. a) Reaming of borewell in upto 60m

799.3.1) Charges for developing the borewell for the entire depth with air compressor of 300cfm capacity [Minimum 8 hours]

826) Supply and laying of Hard core layer 200mm

832.5.2) Supplying and fixing in position of UPVC window of casement type (open) for all sizes

832.5.3) Supplying and fixing in position of UPVC Ventilator louvered ventilator type for all sizes

943.5.2) Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity

943.6) Supply and fixing of Carbon-di-Oxide Gas Type 2 kg.capacity Fire Extinguisher as per New IS15683 complete with control valve, discharge hose with horn

960.4.5.1) Supply and fixing of 4' 18 watts LED Tube Light (Crystal glass)

961.b) Supply and fixing of Aluminium TNPHC Emblem of 30" height

961.1) Supplying and fixing of following height aluminium letters a) 12" height aluminium letters

961.2) Supply and fixing of plastic foam name plate with vinyl cutting letter with approved colours etc., a) 24"x8" plastic foam name (RWH)

Bidder Name

dp constructions