SITC of Unitary AC machine

Dismantling charge for existing split/window type air conditioner and handing it over to the store house /section office as per instruction of EIC

Supply of 1.1 Tr. Capacity Rated Split type Air - Conditioner Machine having cooling capacity 4000 watt ,Rated Power input 1020 watts,ISEER 3.92,Rated Current 4.5-5.5 Amps. Supply of 230 Volt AC 50 Hz.Compressor type- Rotary, Refrigerant type -R 32,Coil Material -Copper and features like modes (Auto,cool,fan,dry ) air flow 1100 m3/hr ( horizontal louver/vertical swing) sleep mode timer off/dust air filter [Make: O-General / Mitsubishi Heavy Duty / Mitsubishi Electric / Daikin] with star rating 3 (Minimum).

Supply of 1.5 Tr. Capacity Rated Split type Air - Conditioner Machine having cooling capacity 5300 watt ,Rated Power input 1380 watts,ISEER 3.84,Rated Current 6.0-7.0 Amps. Supply of 230 Volt AC 50 Hz.Compressor type- Rotary, Refrigerant type -R 32,Coil Material -Copper and features like modes (Auto, cool,fan,dry ) air flow 1400 m3/hr ( horizontal louver/vertical swing) sleep mode timer off/dust air filter [Make: O-General / Mitsubishi Heavy Duty / Mitsubishi Electric / Daikin] with star rating 3 (Minimum).

Supply of 2.0 Tr. Capacity Rated Split type Air - Conditioner Machine having cooling capacity 7050 watt ,Rated Power input 1850 watts,ISEER 3.92,Rated Current 8.0-9.0 Amps. Supply of 230 Volt AC 50 Hz.Compressor type- Rotary, Refrigerant type -R 32,Coil Material -Copper and features like modes (Auto, cool,fan,dry ) air flow 1450 m3/hr ( horizontal louver/vertical swing) sleep mode timer off / dust air filter [Make: O-General / Mitsubishi Heavy Duty / Mitsubishi Electric / Daikin] with star rating 3 (Minimum).

Supply of 1.5 Tr. Capacity Rated Window type Air - Conditioner Machine cooling capacity 5300 watt ,Rated Power input 1700 watts,ISEER 3.12,Rated Current 6.0-8.0 Amps. Supply of 230 Volt AC 50 Hz.Split type Air - Conditioner Machine having features modes (Auto, cool,fan,dry ) air flow-950 m3/h ( horizontal louver/vertical swing) sleep mode timer off/on anti freeze thermostat bio/active carbon/dust air filter [Make: O-General / Mitsubishi Heavy Duty / Mitsubishi Electric / Daikin] with star rating 3 (Minimum).

Installation, testing and commissioning of 1.1/1.5/2.0 TR Capacity R410A/R32 Ref Gas split air conditioner with iron bracket (powder coated) including initial charging of cooling agent R410A/R32 gas and all necessary fittings and fixtures ,angle support etc. as required by site condition

Installation, testing and commissioning of 1.5 Tr window AC including wood frame of required size and GI tray with proper fixing arrangement , initial gas charging and mending good the damages to original finish.

Supply and Fixing of Copper Refrigeration pipe line (Make:Nippon/Ryoku/Rajko) for both Liquid line and Suction Line suitable for the above split unit with hard /soft drawn copper piping and with proper supports & brackets( per direction of E.I.C.) incl. 9 mm thick nitrile rubber insulation with proper tapping and mending good damages to original finish.

Suction Line : 5/8" Dia

Suction Line : 1/2" Dia

Liquid Line : 1/4" Dia

Supply & drawing 3 core 2.5 sq. mm. P.V.C. insulated wire for connecting the Power hub to Outdoor unit supply. [Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C]

Supply & drawing 4 core 1.5 sq. mm. P.V.C. insulated wire for connecting the outdoor to indoor supply.[Make Polycab / RR /KEI/ Havells/ Gloster as approved by E.I.C]

Supply & laying of 3/4 '' PVC flexible drain pipe (Supreme / Oriplast /Approved make ) with necessary accessories as required.

S&F of 25 mm heavy type (40 Grade) UPVC pipe with necessary elbows,connector,solvent cement & clamps. (Make: Supreme / Oriplast / Approved make)

Supplying, fabrication incl painting & fixing of frame for keeping the outdoor of AC machines with M.S u-channel of 6 mm thick of size (75 mm x 40 mm x 40 mm) for making Base Frame/platform for installation of outdoor unit of above mentioned AC machines incl. drilling 2 no's holes in each channel , cutting holes into the wall & grouting the same with cement concrete (1:1 ½ :3) etc. fabricated with . horizontal flats of 25 mm x 5 mm and supporting angle of 50mm x50mm x 6mm in each platform in the outer edge for transmitting the load centrally through 3 no's (50 mm x50mm x6 mm) angle inserted into the existing wall incl. construction of railing with 25 mmx25mmx6mm and 25 x5 mm flats as per Direction of E.I.C. The entire structure must be safe to carry out maintenance of ODU . Area of the platform is 3.5 Mtr. x 1.4 Mtr., as per Direction of E.I.C

Supply, Fabrication & Installation of Enclosed safety cage with lock & key arrangements for AC machines outdoor at Ground Floor. :- Size of MS structure frame as given : 1.4mtr.(L) x 0.8mtr.(D) [Extra depth = 0.15 mtr. for fixing in wall] x 1.0mtr.(H). with MS equal angle and MS Flat. Numbers & Sizes of MS equal angles are - 1) 35x35x5mmx0.95mtr =4 nos. 2) 25x25x5mmx1.0mtr = 6 nos. & 3) 25x25x5mmx1.4mtr.= 6 no's. and Number & Sizes of MS Flats are - 1) 25x5mmx1.4mtr = 9 no's 2) 25x5mmx1.0mtr.= 10 no's & 3) 25x5mmx0.8mtr.= 14 nos. are to be used for making the structure which will be fixed on the outside of concrete wall by cutting hole & necessary scaffolding arrangement & mending good damages as per direction of EIC. Total weight of enclosed safety cage is approx. 70 kg. The structure is to incorporate lock & key facility with hinge arrangement at front opening required for necessary servicing, including necessary painting with one coat RO primer & 02 coat of Oil paint( Asian paint/ Shalimar/ Berger).

ᴁ관楈楲杮挠慨杲獥映牯猠慣晦汯楤杮愠牲湡敧敭瑮椠据畬楤杮搠獩慭瑮楬杮愠⁴桴⁥湥⁤景眠牯湡⁤慣牲慩敧‬潦⁲䑏⁕湡⁤瑓畲瑣牵⁥湩瑳污慬楴湯‬数⁲瑳牯祥漠⁦畢汩楤杮瀠牥瘠牥楴慣畲Ѯ慅档一⹯匀瑥ጠ瑓牯祥嘯牥楴慣畲慎敭漠⁦潗歲›䔠敬瑣楲慣湉瑳污慬楴湯眠牯湩汣摵湩⁧䥓䍔漠⁦䍁䴠捡楨敮⁳湩ㄠ瑳䘠潬牯†湡⁤敖瑲捩污祬攠瑸湥敤⁤渲⁤汆潯⁲漠⁦偉⁄畂汩楤杮映牯䄠呒挠湥牴⁥瑡䴠⁒慂杮牵䠠獯楰慴ⱬ吠汯祬畧杮⁥䬬汯慫慴匭呉⁃景唠楮慴祲䄠⁃慍档湩⹥f吀湥敤⁲湉楶楴杮䄠瑵潨楲祴›硅捥瑵癩⁥湅楧敮牥ⴠ䤠ⱉ䬠汯慫慴匠畯桴䠠慥瑬⁨汅捥牴捩污䐠癩獩潩Ɱ倠圮䐮整⨮潃瑮慲瑣丠㩯†䉗坐⽄䕅䤭⽉卋䕈⽄ㅑㄱ㈯ⴵ㘲

The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them. Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work/ submission of bill. If any refurbished material is supplied and installed, penal action will be taken as per existing rules

Defect Liability Period - 1 (One) year after completion of work

Make & model of each and every material to be approved by EIC