Lake Front Development at Velachery Chennai

Amount

CIVIL WORKS

Dismantling & removing the existing Reinforced Cement Concrete work etc., by using required mechinaries including stacking of steel bars and disposal of unserviceable material within 50m lead, labour charges, as per direction of Engineer in charge.

Dismantling & removing the existing Plain Cement Concrete work etc., by using required mechinaries and disposal of unserviceable material within 50m lead, labour charges, as per direction of Engineer in charge.

Dismantling brickwork manually by mechanical means including stacking of serviceaboe material and disaposal of unservice material within 50 meters lead as per direction of Engineer in charge..

Dismantling & removing the existing Paver Blocks and stacking the same within 50m lead, labour charges, as per direction of Engineer in charge.

Dismantling MS Steel Works in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50m lead .

Earth work excavation for all foundations in all type of soils and sub soils to the required depth for Footings, plinth / grade beams, etc,. by mechinaries including manual excavation for the following type of soil / rock as per detailed specification. As per SS 20B as hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary and including refilling 0 to 2.0m depth consolidation depositing the surplus earth in places shown clearing and leveling the site with an initial lead of 10 metre and lifts as specified hereunder etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers.

Carting away surplus excavated earth available with in the campus is to be carted to a lead of within 10 KM from site. The rate shall include loading into the tipper/ lorry transporting and unloading, leveling and the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Departmental Officers. Rate to include materials, loading, unloading, transportation, plant and machinery, hire and fuel charges for tools and plants and other incidental charges, royalties, seignorage and taking statutory approvals as necessary to carry out the work as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Pile Works

Providing the pile rig including transportation, installation, driving with hydraulic piling rigs with power units and installing driven cast-in-situ reinforced cement concrete piles of grade M-30 of specified diameter and length below the pile cap, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoe and the length of pile to be embedded in the pile cap etc, inclusive of pile accessories, temporary casing pipe, concrete with required density and routine test as per IS 2911 (Part- IV) - 2013 etc. complete as directed by the Engineer-in-charge. Design Mix M30 Grade concrete using with ordinary Portland Cement with water cement ratio not exceeding 0.5 including the use of Plasticizer of required Grade and Hard Broken Granite Stone Jelly of 20mm size and down graded as per requirement. Mix Design Data has to be got approved by the Engineer-Incharge before commencement of work.

The minimum cement content should not be lesser than 400 kg per cum. The rate shall include mobilization of all miscellaous works including necessary pile chipping to the required depth and finishing the top of the pile neatly etc complete in all respects. Likewise, incase of pilegrowing if found necessitated during execution the same should be done to the required depth including developing the reinforcement also simultaneously to the required length and lap all as directed by the Engineer-incharge. (Length of pile for payment shall be measured from top of shoe to the bottom of pile cap)

450mm Dia pile

600mm Dia pile

Carrying out initial working pile load test on specified dia piles as specified in IS:291 1 (Part 4). Includes all plant, equipment, machinery. instruments, measuring devices, platforms and kentledge pile caps etc., dismantling and carting away entire setup, excavation and dewatering etc., all complete

450mm Dia Pile

Carrying out initial working pile load test on specified dia piles as specified in IS:291 1 (Part 4). Includes all plant, equipment, machinery. instruments, measuring devices, platforms and kentledge pile caps etc., dismantling and carting away entire setup, excavation and dewatering etc., all complete

600mm Dia Pile

Soling With Gravel to a Consolidated Thickness of 100mm Thick Using 1.333 Cu.m of Gravel For An Area of 10 Sq.m Including Spreading Watering And Consolidation By Power Road Roller Etc. Complete

Supplying and Filling with M - sand in foundation and others sub structures for 100mm thick and well watered, rammed and consolidated by power compacter. The rate includes the cost of M sand, compacting with mechanical compactors, labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification

Construction of Granular sub-base of 150mm compacted thickness by providing laying, spreading and compacting of Close graded Material conforming to Grading V of Table 400-1 of MORTH clause 401 ,mixing in a Wet Mix Plant of 200 tonne capacity at OMC, carriage of mixed material to work site, spreading in uniform layers withmotor grader o n prepared surface and compacting with vibratory roller 8-10 tonne to achieve the desired density of 98% including protection of edges of GSB layer, cost of all materials, labour, hire charges of machinery, lighting, guarding, barricading maintenance of diversion road loading & unloading, all lead and lift etc., to achieve minimum CBR value of 30%(Compacted Thickness) in accordance with MORTH technical specification clause No. 401 and with all other incidental charges and as per the direction of the Engineer-In-Charge of work

Providing and laying plain cement concrete 1:4:8 ratio of (1 cement, 4 Msand and 8 graded stone aggregate 40mm nominal size) in foundation and basement including dewatering wherever necessary and laid in layers not more than 15 cm thick and consolidation etc. The rate includes the cost of materials, labour charges, lifting charges, loading & Unloading and Transportation etc., complete and as per the standard specification.

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. b)For column footing plinth beam bed blocks templates staircase, steps piers, raft beam, raft slab etc.

For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For column footing plinth beam bed blocks templates staircase, steps piers, raft beam, raft slab etc.

for plane surfaces such as rectangular or square rcc columns, sunshades, top and bottom slab of rcc boxing, etc.

For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical walls etc.

Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Footings, Grade beam, drain wall & raft , Plinth beams, Column, Grade slab, Roof slab & beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. in-charge. The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge

For Foundation and Basement for 1.0 Cum

For Grond floor Upto 4.5m height (Unique Code W-0090)

Providing and Laying M 40 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Raft, Grade beam, Shear wall, RCC walls, Lift walls, Plinth beams, Column, footings, Grade slab, Roof slab & beam, Curved slab, beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins, facia Planter box, binders, basement, retaining wall, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items.

Supplying, fabricating and fixing in position of steel Fe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate including cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 200 mm and 200 mm thick of solid cement concrete with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc,. only shall be used. Rate to include all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.

Foundation & Basement

Ground Floor

Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of P sand) according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. The rate including cost of all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of P sand) according to the specification. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Plastering 15 mm thick for external surfaces with Cement Mortar 1:5 (1 of cement : 5 of P sand) with water proofing compound of “CICO No.1 or equivalent“ as per Manufacturer's Specification with sponge finish (washed sand finish) all complete as per specification and as directed. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supply and painting of two coats of Acrylic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer. Rate including all brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.(Ceiling & Internal surface)

Supplying and painting of 2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete. The rate including cost of materials, brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supplying and fixing Exposed Grade Clay tile cladding on masonry walls and RCC Elements using CM 1:5 And pointing all inclusive of labour, materila, Scaffolding, Loading & Unloading

Supplying and laying of Flooring with Joint free double charged vitrified tiles of approved quality, colour and design joint free of size 600 x 600 x 8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.. (Including Skirting)

Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supplying and laying of Flooring with Anti Skid vitrified tiles of approved quality, colour and design joint free of size 600 x 600 x 8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.. (Including Skirting)

Supply & Laying with the best quality approved kotta stone slab not less than 20mm thick and the size of slab in general not less than 600 X 600 mm machine cut and machine high Semi - polished set in C.M 1:4 20 mm thick with white cement sluury for surface contact of the bottom of the kotta slab as per approved pattern / design as per the drawings by using irrespective of size and shapes including finishing the joints with white cement sluury, cutting, edge chamfering and polishing rough, medium nice and acid wash and tin - oxide polish. Rate including all materials labour Charges, wastages, Necessaryleads & lifts working at all levels transportation charges loading and unloading, preparation of surfaces, necessary hacking in RCC surfaces cutting to required shape tool, and plants fuel, curing, cleaning acid wash over finished surfaces, protection with Gypsum / Pop layer over plastic sheet and removing the same before handling over as complete with all respects complying with relevant standard specifications and as directed by the Client / Engineer in Charge

Supply and laying flooring with best quality the following materials of Machine Polished granite slab not less than 18 mm thick (Jet Balck) in CM 1:4 (1 of cement : 4 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts working at all levels, transportaion charges, loading & unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Supply and Laying flooring with best quality approved colour 18mm thick Flamed Steel Grey Granite Slab for Staircase and Ramp flooring of size not less than 1200 x 600 mm machine cut and set in C.M 1:4 (1 of cement: 4 of manufactured sand) 20 mm thick topped with white cement slurry (tor surface contact of the bottom of the granite slab) as per approved pattern, Including tinishing the joints with matching shade cement slurry, cutting, edge chamfering and polishing rough medium, nice and tin-oxide polish.Rate including all materials, labour charges wastages, necessary lead and lifts, working at all levels, transportaton charges, loading, unloading. preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, antiskid grooves,tools and plants, fuel, curing, cleaning, acid wash over Finished surface, protection with Gypsum/Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge

Polishing and Nosing the Granite Slab To Half Edge to round shape and finishing the surface neatly etc. complete complying with standard specification as directed by department officers

Nosing of Granite - Single Nosing

Nosing of Granite - Double Nosing

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

3 Track Sliding Window

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

UPVC Door

Flush doors : Supplying and fixing single leaf flush door 32/30mm thickness poth side commercial ply and approved brand Century/ Merino/ Greenlam with T.W.frames of size 100x75mm at side verticals and top, 6Nos.of iron hold fast fixed in C.C.1:2:4 and 3Nos.of butt hinges 125mm long including wind appliances furniture iron fittings 2Nos.of iron pad lock 15cm long for locking arrangements and fixed in position as directed during execution.(ISI STD)

Supplying & Fixing Godrej Make Aluminium Door Closer Suitable for left or right handed doors as per archiectural Details

Supplying & Fixing Godrej Mortise Door Lock handle set with 6-Lever Locking Mechanism of Satin Steel Finish as per architectural Details

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Supply and applying water proofing treatment on external and Internal surface at UG Sump raft, raft sides, inner & external walls etc. using cement admixed with water proofing compound in the following order. i) Making ' V ' grooves at the construction joints of size 20 x 20 mm and filling the "V" Groove with CICO No. 3 Quick Setting Waterproofing Compound admixed with cement. ii) Supply and Fixing of 50 long 18 mm dia GI nozzles in the hole of about half the depth of member size along construction joints, and honey comb areas at a spacing not more than 1m c/c. iii) Supply and Applying injection grouting through the nozzles grouting pumps with a minimum pressure of 2 kg/sqcm with cement slurry admixed with CICO Non shrink Polymeric Water Proof Grouting Compound or approved equivalent at the rate of 2% by weight of cement. iv) Sealing & cutting of nozzles and leveling the surface using integral Waterproofing compound CICO NO.3 or approved equivalent in the ratio 1:1by weight.

Terrace Waterproofing Supply and laying water proofing treatment for terrace covering the following order and consisting of following operations. i) Making V' grooves at the construction joints of size 20 x 20 mm and filling the "V" Groove with CICO No. 3 Quick Setting Waterproofing Compound admixed with cement.The roof slab gutter slab shall be thoroughly cleaned to remove debris and dust, and applying 2 coats not less than 2 mm of polymer based Elastomeric Coating like TAPECRETE - RTU compound and cured for 7 days and followed by a layer of 20 mm thick cement mortar 1:3 admixed with CICO NO: 1 (or) other approved equivalent make shall be spread over the prepared surface

The gap cement mortar 1:4 admixed with compound like CICO NO:1 or approved equivalent afterwards curing shall be carried out for two days a final layer of cement mortar of 1:3 admixed with water proofing compound like CICO NO:1 or approved equivalent make shall be laid to a thickness of 20 mm and draw a false line of 300 mm x 300 mm.

On the spread mortar provide and lay well burnt brick bats (COBA) to a average minimum thickness of 55 mm (i.e.. minimum 40 mm thickness at lower end and 70 mm thickness at higher end). An additional layer of brick bat (COBA) shall be laid over the existing brick bat COBA surface if required to get the required gradient for adequate drainage giving a slope of approximately 1 in 120, which will be measured separately under relevant item.

The parapet side wall / gutter wall shall be thoroughly cleaned to remove all dust particles and a layer of 15 mm thick C.M 1:3 shall be laid to a height of about 300 mm above the top of the terrace/Gutter slab on the Parapet / Gutter side wall admixed with water proofing compound like the CICO NO:1 or approved equivalent make. Providing, supplying, mixing, applying two coats of ready to use two component Acrylic polymer modified cement based, flexible, water proofing slurry like or approved equivalent to a thickness of 2 mm over the plastered surface of operation as per manufacturer's specification and as directed.(Plan area of Terrace only will be measured for payment )

Supplying and laying of Top of roof with Solar reflective tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as per The the direction of the Engineer-In-Charge. make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Providing and laying EPDM Flooring (Ethylene Propylene Diene Monomer) of 36mm thickness with proper laying materials of approved sample as per design / drawing laid compacting, levelling to required slope, finishing neatly. The rate including cost of all materials, labour charges, transportation, loading & unloading and all incidentals etc. complete complying with relevant standard specification and as directed by the Engineer-in-charge.

Supply and fixing in position of Hot rolled structural steel Members/ Sections consisting of MS joists, channels, angles, purlins, pipes, hollow tubes, runners, insert plates, etc. at all levels. Surface preparation of all MS members by Sand blasting to SA 21/2 grade and painted with anti corrosive, PU paint (metallic finish) with compatible primer to a minimum film thickness of 75 microns and 2 coats of PU paint of and total dry film thickness 225 microns Rate to including all Lifts, wastage, cost of bolts, nuts, washers, welding, electrodes and connections required for the work. No extra on this account will be paid for, and the rate to include preparation of fabrication shop drawings for owner's approval. etc., as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge

Supply of laser cut 2mm MS sheet Fabricated with curved square 30x30 ms tubes finished with Powder coat (Brown Matt) Metal Pillar Size – 1.8m Dia x 2.7m Height As per the given design all inclusive of transporation loading & Unloading

Supplying and fixing of 0.5mm thick galvanised steel sheet prefabricated sandwich 50mm thick PUF panels with rigid PUF injected CFC/ HCFC free (Zero ODP) blowing agent Pentane polyurethane foam as insulation and galvanized steel sheet with slight ribs with 180 gsm. zinc coated for base metal and 20 Micron Polyester coating over 5 Micron primer 0.50mm thick on both sides as skin materials and having density of not less than 40 kg/m3 for self supporting wall panels of cold room chambers and pre cooling room complete for all lengths including wall panel capping Flashing with PPGI / ‘Z’ Flashing and sealant for joints of panels and height as directed by the departmental officials and as per standard specification.

Everwood composite EWD145x25 deck board fitted on hollow aluminium joist EWD50x30EDx1.5mm framework. Framework fitted on floor with intervals not exceeding 350mm c/c with Aluminium clamps & N8/60 screws as designed. Composite plank fitted on joist with SS304 grade start & end clips / PA grade center clips fastened with corroshield 7x25CSK screws. Necessary sides to be covered with EWD57X10 trims as specified.

Supplying & Installing Everwood composite EWD190x24D deck board fitted on hollow aluminium joist EWD50x30EDx1.5mm framework. Framework fitted on floor with intervals not exceeding 350mm c/c with Aluminium clamps & N8/60 screws as designed. Composite plank fitted on joist with SS304 grade start & end clips / PA grade center clips fastened with corroshield 7x25CSK screws. Necessary sides to be covered with EWD57X10 trims as specified.

Supplying & Installing Everwood composite profile EWD100x40 (Without MS inserts) is fitted existing MS framework with corroshield screws as per drawings and specifications

Art work as per the direction of department official, over Oil Painting with first class quality and approved colour including a priming coat with thorough scrapping clean removal of dirt., etc., complete and including necessary plaster of paris, putty, etc., wherever required (Relevent ISI STD), including putty works.

Providing And Laying of Hot Applied Thermoplastic Compound 2.5 mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness of 2.5 mm Is Exclusive of Surface Applied Glass Beads As Per Irc:35 The Finished Surface To Be Level Uniform And Free From Streaks And Holes Etc Completed As Per Mort& H Specification No.803

Providing Pre - construction Anti - termite treatment and creating a chemical barrier to the building by injecting chemical emulsion of required concentration under grade slab and grade beam and below the ground level as well as outside all-round the building at plinth level etc as per the instructions of manufacturer and as directed by the Client / Engineer-in-charge. The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 or equivalent BS specification. The chemical to be used as insecticide for the treatment shall be Biflex Tc and the application shall be diluted 1 part of chemical Biflex Tc with 49 parts of water to get 0.05% emulsion and strictly in accordance with the manufacturer’s specification.

Providing and laying non-pressure class NP2 RCC Spun pipes with collars including excavation of trenches in soil/murum/rock, laying the pipes as per layout and drawing, filling the joints with stiff mixture of cement mortar (1 part cement :1part fine sand) and jute, curing, testing the pipe and refilling the trenches in layers with due compaction & watering etc. complete as directed

300mm Dia

Supplying And Fixing Rubber Moulded Interlocking Blocks Against Available Edge Restraints 80 mm Thick of Approved Design And Pattern of Strength 40 N/Sq.m. 10 mm Iss Metal With Minimum Cement Content As Applicable To M 40 Grade Concrete As Per Is-456-2000 Manufactures By Mechanical Or Hydraulic Machine Using Vibro- Compaction Process And Laid Over 50 mm Thick Laying Course (Bedding) Crushed Stone Sand (M Sand) Well Compacted By Plate Compactor With A Joint Width of 2 mm To 5 mm Including Filling of All Joints With Crushed Stone Sand (M Sand) And Compacting The Paved Surface With Plate Compactor Two Or Three Times Until All The Unit-To- Unit Joints Are Completely Filled With Crushed Stone Sand (M Sand) And Trimming The Edges Neatly Including All Labour Charges And Plate Compactor Charges Etc. Complete(Cost Inclusive of Crushed Stone Sand (M Sand)).

Supplying And Fixing of Rubber Moulded Grey Premium Concrete Kerb of Size 450X125X300mm Using M30 Concrete. The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The Rate Shall Include Cost of Materials Transportation Loading Unloading Charges And All Taxes Including Necessary Earth Work Pointing With cm. 1:3 To Full Depth Curing Thread Lining Etc Complete .

Kerb- 600 x 300 x 150mm SPLAY Pre cast concrete kerb Providing and fixing 2.5Mpa Grade of concrete precast exposed pimple texture finish kerb stones of steel mould Vaccum wet pressed machine approved make as per approved sample of any size and any type. Kerbs shall be fixed on the 100mm thk M15 PCC foundation prepared as per approved design. The rate shall also include for erecting and fixing the pieces in position for complete kerb system with Half Batter /Bullnose/ square Profile type of kerbs including necessary accessories of kerb like radius kerb, angles and quadrant kerbs, droplet kerbs etc. complete as per drawing. Kerb shall be fixed as paper joint without any jointing material. However cement mortar shall be provided at the backside of kerb stone joint. (Sample must be approved) Cost of excavation, cutting , base , side filling shall includes as directed engineer - incharge. (b) HB/BN/SQ 600x300x125mm. Make VYARA ,Basant Betons or equivalant

Kerb- Median 600x450x150mm Pre cast concrete kerb Providing and fixing 2.5Mpa Grade of concrete precast exposed pimple texture finish kerb stones of steel mould Vaccum wet pressed machine approved make as per approved sample of any size and any type. Kerbs shall be fixed on the 100mm thk M15 PCC foundation prepared as per approved design. The rate shall also include for erecting and fixing the pieces in position for complete kerb system with Half Batter /Bullnose/ square Profile type of kerbs including necessary accessories of kerb like radius kerb, angles and quadrant kerbs, droplet kerbs etc. complete as per drawing. Kerb shall be fixed as paper joint without any jointing material. However cement mortar shall be provided at the backside of kerb stone joint. (Sample must be approved) Cost of excavation, cutting , base , side filling shall includes as directed engineer - incharge. (b) HB/BN/SQ 600x300x125mm. Make VYARA ,Basant Betons or equivalant

Kerb- 600 x 300 x 150mm FLUSHED Pre cast concrete kerb Providing and fixing 2.5Mpa Grade of concrete precast exposed pimple texture finish kerb stones of steel mould Vaccum wet pressed machine approved make as per approved sample of any size and any type. Kerbs shall be fixed on the 100mm thk M15 PCC foundation prepared as per approved design. The rate shall also include for erecting and fixing the pieces in position for complete kerb system with Half Batter /Bullnose/ square Profile type of kerbs including necessary accessories of kerb like radius kerb, angles and quadrant kerbs, droplet kerbs etc. complete as per drawing. Kerb shall be fixed as paper joint without any jointing material. However cement mortar shall be provided at the backside of kerb stone joint. (Sample must be approved) Cost of excavation, cutting , base , side filling shall includes as directed engineer - incharge. (b) HB/BN/SQ 600x300x125mm. Make VYARA ,Basant Betons or equivalant

Supplying & Fixing Of pavers 60mm Thk Toscana (Basant & Betons) Using M30 Concrete Placed Over 50mm Thick Crushed Stone Sand (M Sand). The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The Rate Shall Include Cost of Materials Transportation Loading Unloading Charges And Including Filling of All Joints With Labour Charges Etc.

Supplying & Fixing Of pavers 80mm Thk random Great fifteen series (basant and Betons) Using M30 Concrete Placed Over 50mm Thick Crushed Stone Sand (M Sand). The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The Rate Shall Include Cost of Materials Transportation Loading Unloading Charges And Including Filling of All Joints With Labour Charges Etc.

Supplying & Fixing of Tactile pavers Grey both Directional & Warning, 300X300X60mm Over 50mm Thick Crushed Stone Sand (M Sand). The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The Rate Shall Include Cost of Materials Transportation Loading Unloading Charges And Including Filling of All Joints With Labour Charges

Concrete Cobble - Providing and laying Red, Black,& Grey cobbles (100*100*80mm) Laying to be done in line and level on bedding sand of 50 mm thick construction sand compacted and watered. Laying to be as per paving drawing, should be completed by proper cutting of blocks where required, compacting by a suitable vibrating machine and cleaning and jointing in micro cement.

Supplying And Fixing of Rubber Moulded Grey Premium Concrete Pavers of Size 200X200X65mm Using M30 Concrete Placed Over 50mm Thick Crushed Stone Sand (M Sand). The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The Rate Shall Include Cost of Materials Transportation Loading Unloading Charges And All Taxes Including Filling of All Joints With Labour Charges Etc.

Supplying and Laying of Grass Pavers- 80mm thk- Providing and Laying of ECOLOGICAL Paver Block Grey 80 mm thick, M-20 Grade of shape "Grass Line" of required size approved quality and colour, laid over the Mixing of Red Earth, sand and manure cushion of 80mm thick. The rough granite shall be compacted using a light tandem roller or plate compactor till the required grade and line is achieved. The rate shall include cost of rough granite, Cost of red earth and Manure mixing, labour charges for laying, leveling, loading & unloading and Transport charges etc., complete complying with standard specifications and as directed by the Engineer-in-charge.

Fine River Sand for play area Supplying and Filling with River sand in Play area . The rate includes the cost of River sand, , labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification

Fabricating and supplying Kiosk ACP cabin of size 10'0"x 10'0"x 8'0" Structure MS tube Heavy 2mm, Side walls @ wood finish ACP sheet @ 3mm thick,Top Galvanism PPGI sheet, Flooring @ 18mm thick fiber cement board with vinyl matt,Interior with 8mm imported plywood (white), joints are covered with Aluminium beadings Elevation & side are projected roof @ 1ft wide, Main @ 2pole ELCB 40A – 01No,Light – 02Nos, Socket, 16A – 06Nos, outdoor spot lights – 04 Nosetc., complete. The rate includes cost of all material, transport to site, labour charges assembling and placing in postion where ever as instructed by departmental officer

Design, fabrication and installation of simple vault tensile fabric work and Steel structure using Belgian make tensile polyester fabric, steel frames by ISO standard acclaimed CE certified installer with structural stability vetting from Anna university ,Chennai having using FLUOMAX Coated Architectural Membrane having tensile strength not less than 4300 N/50mm/ 4200 N/50mm (Warp/ Weft) and Tear strength not less than 600 N/ 500 N (Warp/ Weft) of make SIOEN Belgium or equivalent, cables, complete perimeter attachment system, and all normally associated components with machines for Fabrication using swiss make Zund cutting machine and Belgian make architectural Membrane on 20KW Forsstrom High Frequency Welding Machine with SEAMLESS WELDS 50 mm weld width X 1400 mm- Single Stroke all PVC joints shall be formed to a tolerance of +1mm, -1mm and shall be assembled to ensure that seams are always single laid and attaining seamless finish by that a cut edge does not face uphill and membrane used to have a double lacquering made out of highly concentrated FLUOMAX PVDF on both side, double PVC coating and be weldable,Including rainwater doen pipe as per required Diameter etc as per direction of Engineer in charge.

Signage-1 In front of the bus stop Providing and fixing Signage with exposed concrete panel and 1.2mm thk SS plate on either side of approved colour and profile with vinyl printed graphic and vinyl lamination as per drawing, as approved mock-up sample. The contractor will have to provide and get approval on the fabrication / shop drawing. The SS plate with the graphic must be mounted on the concrete panel with anchor bolts/studs and hoisting and erected it the RCC foundation as per the drawing and rendering if required.

Signage-2 Entrance Signage Providing and fixing information board on rectangular hollow steel section and 5mm thk corten steel plate as per drawing, as approved mock-up sample. The contractor will have to provide and get approval on the fabrication / shop drawing. Both frame structure of rectangular hollow steel are welded as per the drawing.

Signage-3 Zoning + Interpretation Plaza Providing and fixing Signage with exposed concrete panel and 1.2 mm thk SS plate on either side of approved colour and profile with vinyl printed graphic and vinyl lamination as per drawing, as approved mock-up sample. The contractor will have to provide and get approval on the fabrication / shop drawing. The SS plate with the graphic must be mounted on the concrete panel with anchor bolts and hoisting and erected it the RCC foundation as per the drawing and rendering if required.

Signage-4 Information Board on railings Providing and fixing information board on railing and 4mm thk rust metal board as per drawing, as approved mock-up sample. The contractor will have to provide and get approval on the fabrication / shop drawing. The rust metal board are welded on the railing as per drawing.

Informatory sign with definition plate- Informatory / Parking sign :-Providing and fixing Facility Information / Parking sign board made out of 4mm ACP (Aluminum composite Panel); size 45×60 cm Rectangular as per design of IRC-67-2012 and definition plate of 45x20cm; Pre treated with phospheting process & acid etching: coated with one coat of epoxy primer and two coats of best quality epoxy paint reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; Mounted on 13.8 mtr long stand post of 65B 3.2mm thick Circular MS Pipe as required and Substrate revetted to frame fabricated from suitable size Square Hollow Section (SHS) 25x25×2mm which is welded to MS Circular Pipe of 32 NB and 2mm thick. The 32 NB Pipe passed through holes drilled in 65NB MS post and welded. The post to be painted with bestquality epoxy coatings in approved color. the details of symbol or inscription / numerals for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from originaa manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered should be submitted by contractor. (A) Class-C Type-11. Retro Reflective sheeting

Mandatory sign with definition plate- Providing and fixing Mandatory sign board made out of 4mm ACP (Aluminum composite Panel); size 60 cm Dia circle as per design of IRC-67-2012 and definition plate of 60x20cm; Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ; reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; Mounted on 3.8 mtr long stand post of 65NB 3.2mm thick Circular MS Pipe as required and Substrate revetted to frame fabricated from suitable MS Square Hollow Section (SHS) 25x25×2mm which is welded to MS Circular Pipe of 38mm dia and 2mm thick. The 32 NB Pipe passed through holes drilled in 65NB MS post and welded. The post to be painted with bestquality epoxy coatings in approved color. the details of symbol or inscription / numerals for each board shall be as per the instruction of engineer in charge.The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg including excavation, curing etc.complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from originaa manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

Cautionary sign with definition plate- Providing and fixing Cautionary sign board made out of 4mm ACP (Aluminum composite Panel); size 60×60x60 cm equilateral Triangle as per design of IRC-67-2012 and definition plate of 60x20cm; Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T. Specifications; Mounted on 3.8 mtr long stand post of 65B 3.2mm thick Circular MS Pipe as required and Substrate revetted to frame fabricated from suitable size of MS Square Hollow Section (SHS) 25x25x2mm which is welded to MS Circular Pipe of 38mm dia and 2mm thick. The 38 NB Pipe passed through holes drilled in 65NB MS post land welded. The post to be painted with bestquality epoxy coatings in approved color. the details of symbol or inscription / numerals for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 × 60 Cms. for each leg.including excavation, curing etc.complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from originaa manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

Supply & Fixing of Clay Jalli Wall as per Architectural Design The rate including cost of all materials, labour charges, transportation, loading & unloading and all incidentals etc.

Supply & fixing of Toilet Cubicle Toilet Cubicle: RATHIKA INTERIORS Nylon CUBICLE SPECIFICATION Supply & Installation of cuboid Restroom cubicle system that includes intermediate panel, pilaster & door made of HPL compact laminates of single colour. Intermediate panel is one continuous panel without any joints , All intermediate panels , pilaster & doors shall be 12mm thick. Accessories & Hardwares (1 Year warrenty): a)Nylon Adjustable Leg, b)Nylon Indication lock, c)Nylon Door knob d)Nylon self closing hinges e)Nylon coat hook f)Aluminium Black coated top rail g)Aluminium Black coated U-Channel h) Aluminium Black coated Door stopper channel I) Noise reduction tape j) SS screws & wall plus.

Supplying & Installing Floating dock - SAIL SAFE MARINE, MUMBAI : Floating Jetty - including connecting pins, side nuts. Material is hdpe , rectangle shape, 50cmx100cm (1 box) . The rate including cost of all materials, labour charges, transportation, loading & unloading and all incidentals etc.

Floating Jetty

Railing

Rope 20mm Nylon

Installation with Anchor & Rope Charges

Supplying and Fixing Outdoor Gym Equipments in approved make and fixing in position. The rate includes the cost of material, transport, surface cleaning slope maintaining and labour charges etc., complete as per drawings and directed by departmental engineers.

Double air walker

Manual Outdoor Chest Press

Outdoor Leg press twister

Four shoulder Wheel

ABS Bord Duo

Combination set of Gym

Pull - up Station

Supplying and Fixing Childrens Multi play Equipments in Ankidyne / Equivalent Brand at 5feet-7feet height with product area 19 ft X 17 ft for 10 to 15 kids of 5 -12 years old played at a time and fixing in position. The rate includes the cost of material, transport, surface cleaning slope maintaining and labour charges etc., complete as per drawings and directed by departmental engineers.

Kids Funstation

Rope Climber

See Saw

Swing

Merry go Round

Totlets see saw

Totlets swing

Totlets spring Seating

Play area equipments : ANKIDYNE COMPANY CHENNAI. Providing and fixing 4 items of sensory equipments on specified play area according to drawing.The provided rates cover fabrication, polyurethane coating, assembling, commissioning and one-year site guarantee. They will need labors for unloading and installation and will need civil material for installing from the customer. (Contains 4 Equipment)

Supplyling & Fixing FRP- Planter box as per spec below: GLASTRES GREENS FRP CUSTOMIZED PLANTER LENGTH:-48" WIDTH:-30" HEIGHT:-24" THICKNESS: 5mm COLOUR: PU GREY MATTE

Supplying & Fixing Grand PY-10000 LED Boyu Floating Fountain Aerator Pump For Lake Pond Aeration, Water Purification: GRENCO ENGINEERS: GRAND PY-10000LED BOYU Floating Fountain Aerator Pump with LED suitable for Lake Pond Aeration, Water Purification, aeration and landscaping for the artificial lake or natural lake, water vila, ecoligical residence, golf course, eco fallow garden. Pond Fountain, Water Treatment. MAIN FEATURE: 1) The pump motor adopt DC frequency conversion technology, compact size, perfect performance, energy saving and environment friendly. 2) Integration funtion of fountain and aeration, compact structure. 3) Visual enjoyment of LED fountain landscape (MODEL: PY-10000LED) 4) PY-10000LED Power: AC 230Volt Power consumption 115-W / 6-W (LED) Water Discharge: 20,000 LPH, Size: Dia 400 X 243 MM 5) Industrial plastic casing. Nice looking and elegant apperance. 6) Float instalation, the pump can float on the water according to the water level, no need manual regulation. 7) All the live parts in the motor are completly sealed by resin for water proof with high insulation. 8) Fully epoxy sealed motor for water proof, free of copper element exposed.

Dustbin- Providing and fixing MS with synthetic wood double dustbin (600 x 450 x 950 mm) of galvanised sheet with powder coating with capacity of 35 Ltr each bin made out of minimum 1.2mm thick sheet with Saflow or equivalent make and as per approved sample. Dust bin shall be floor mounted with anchor bolt with both side pivot for tilting having stand arrangement. Bin basket will be pivoted with side profile & with allen key lock. Dustbin shall be having chemical resistant, blended with stabilizers, Anti Corrosive, Anti Acidic, Nontoxic and free from joints, welds or rims; open from either side for easy garbage drop even from distance, Dustbin model shall be provided for approval and separate Dustbin for Dry and wet Waste shall be provided (Green and Blue Colour Demarcation on it, along with client logo on side)

Supplying of 3 Seater Sofa with First Quality Teak Wood Frames, using 100% polyester fabric and high density air foam. The rate including cost of all materials, labour charges, transportation, loading & unloading and all incidentals etc.

Supplying & Fixing Seat benches CB-1 as per drawings with Precast RCC Frames & Wood Composite for floor as per architectural Design. The rate including cost of all materials, labour charges, transportation, loading & unloading and all incidentals etc.

Supplying & Fixing Seat benches BB-2 as per Drawings with back rest using Precast RCC Frames & Wood Composite for floor as per architectural Design. The rate including cost of all materials, labour charges, transportation, loading & unloading and all incidentals etc.

Supplying & Fixing Seat benches without back rest BWB-3 as per drawings using Precast RCC Frames & Wood Composite for floor as per architectural Design. The rate including cost of all materials, labour charges, transportation, loading & unloading and all incidentals etc.

Supplying & Fixing Angled Seat benches BA-4 with back rest using Precast RCC Frames & Wood Composite for floor as per architectural Design. The rate including cost of all materials, labour charges, transportation, loading & unloading and all incidentals etc.

Supplying and fixing Precast concrete table TA-1 as per architectural Details. The rate including cost of all materials, labour charges, transportation, loading & unloading and all incidentals etc.

Dewatering using 5 HP Diesel Pump as and when required at site as per the directions of Engineer-in-charge. Per hour complete including cost of all materials scaffolding HOM of machineries with all lead and lifts labour charges including implementation of Environmental and Social Safeguards and as per design drawing technical specifications and directions of Engineer in charge.

Supplying, laying and commissioning Vertical flow constructed Wetland, Plantation etc ,Including Design, Drawings, Supervision to fit in to the available space and inflow at Locations L7(1000 KLD) (Outlet parameters conforming to the latest NGT Guidelines) Following are the components Considered for the Vertical flow constructed wetlands Technology(Secondary treatment) for each STP(Lot) (Approved Market Rate) 1.Stones 20 -40mm (Minimum 308 Cum for 1000 KLD Capacity Each) 2. Stones 10 -20mm (Minimum 616 Cum for 1000 KLD Capacity Each) 3. Stones 4 -8mm (Minimum 1540 Cum for 1000 KLD Capacity Each) 4. Passive aeration PVC pipes land 5. plants(Canna Indica)(Minimum 2000) 6. Any other item if required to meet the outlet parameter requirement.

Electro-Mechanical Cost : Supply, Installation, Testing of all Electro-Mechanical Equipment's at location (Outlet parameters conforming to the Latest NGT Guidelines) considering the following components for each STP(Lot) such as 1.Sluice Gate (MOC - C.I. Gate, 300mmX 300mm Size, Manual - 1 No. for Bypass) 2.Process Pump Non clog, Non clog, Submersible Pump with flow 50m3,hr, Head 10m or as suitable along with lifting arrangement,NRV and Gate Valve ( Minimum 2 Sets- 1 Working + 1 Standby) 3. Sodium Hypo Dosing System- Sodium Hypo Mixing Tank HDPE, PVC Tank, Dosing Pump 2 Nos. - 1 Working + 1 Standby of 50 LPH along with piping ( Minimum 1 Set) 4.Bio Reactor Piping -UPVC ( Schedule 40) Header and Laterals to distribute the sewage on top of SBT Bio reactor, with spacing between laterals 0.9m along with special like Tees, elbows and Gate valve to control the flow (1 Lot) 5.Flowmeter to discharge pipe-Mechanical flowmeter ( Suitable size as per Discharge Flow) to measure the treated sewage discharge ( Minimum 1 No) 6.Control Panel -Control Panel to operate the pumps in auto mode along with level sensors, cabling, earthing and tapping main power (1 Lot) 7.Manual Screens - Manual Coarse and Fine Bar Screen with MOC SS304 of bars (Minimum 1 No Each) 8.Any other item if required to meet the outlet parameter requirement.

Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA(Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro-reflective surface shall be 35 (+/-5) degrees to base. The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I:809 as recommended in BS:873 part 4:1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in?charge.

Providing and Applying PU paint of approved make, recommend need for internal application for the concrete roads / cobble stone flooring to the approved shade , shape & size as per detail drawing adhering to international standard. Surface Preparation, Crack treat as per approved MS with epoxy mortars if required, Mix and apply moisture insensitive PU primer and allow it cure for 6 hrs ensuring a moist true less than 5%, Mix and apply PU top coat of approved shade/color to a minimum of 2.5 mm thick & allow it to cure for 24 hrs before clear ng for the traffic. Complete as per the specification and as directed by project in charge, the rate inclusive all necessary base preparation n, base coat as per approved methodology.( White / Yellow)-I traffic flow (floor arrow painting)

RETRO –REFLECTORISEED TRAFFIC SIGN Cautionary signage 60cm equilateral triangle plus 60 cm x 20cm rectangular additional plate.Providing and fixing of reflectorised cautionary, mandatory and Informative sign as per IRC-67-2012 made of micro prismatic grade sheeting as per ASTM 4956-09 Type -XI fixed over 4 mm thick Aluminum Composite Material supported With frame fabricated from suitable size MS angle 40mm x 40mm x 5mm square box or equilateral triangle as required on a mild steel angle iron post 65mm NB MS MW pipe or equivalent MS Pipe section firmly fixed to the ground. The total height of pole/Stand post is 3.3 mt and clear height is 2.1 from the footpath top or ground level by means of properly designed foundation with M25 grade cement concrete 45cmx45cmx60cm below footpath/ ground level as per approved drawing including excavation, curing etc. complete under the supervision of engineer In Charge. The pole shall be Painted with best Quality epoxy coating in Black and white Bends. The details of symbol for each board shall be as per the instruction of engineer incharge.

RETRO–REFLECTORISEED TRAFFIC SIGN Informatory signage 60cmx45cm rectangular plus 45 cm x 20cm rectangular additional plate. Providing and fixing of reflectorised cautionary, mandatory and Informative sign as per IRC-67-2012 made of micro prismatic grade sheeting as per ASTM 4956-09 Type -XI fixed over 4 mm thick Aluminum Composite Material supported With frame fabricated from suitable size MS angle 40mm x 40mm x 5mm rectangular box as required on a mild steel angle iron post 65mm NB MS MW pipe or equivalent MS Pipe section firmly fixed to the ground. The total height of pole/Stand post is 3.3 mt and clear height is 2.1 from the footpath top or ground level by means of properly designed foundation with M25 grade cement concrete 45cmx45cmx60cm below footpath/ ground level as per approved drawing including excavation, curing etc. complete under the supervision of Engineer In Charge. The pole shall be Painted with best Quality epoxy coating in black and white bends. The details of symbol for each board shall be as per the instruction of engineer incharge.

ROAD WORKS

Cold Milling of Existing Asphalt surface to the required depth using milling machine including hire and running charges for the machine cleaning the milled surface as to avoid slippery including all other incidential charges and other unforeseen charges etc. complete

Conveyance Charges for milling materials to the work site to designated dumping yard

Providing and laying Prime Coat 7Kg/10 M2 With Bitumen Emulsion (Slow Setting) ( Procured from State/ Central Public sector undertakings only) Including Cost of Bitumen emulsion At The Site Including Labour Charges For Preparing The Surface And Applying Required Quantity of Bitumen Emulsion As Prime Coat Using Bitumen Sprayer Etc. Complete Over Wet Mix Macadam As Per Clause 502 of Mort & H Specifications.

Providing and laying Tack Coat 2.5 kg/10 m2 with Bitumen Emulsion (Rapid Setting 1) (Procured from State/ Central Public sector undertakings only) including cost of bitumen emulsion at the site, including labour charges for preparing the surface and applying required quantity of bitumen emulsion as Tack Coat using bitumen sprayer etc., complete over the primed surface as per clause 503 of MoRT& H SpecificationsRev.5

Providing and laying upto 75mm consolidated thick Dense Bituminous macadam using 0.40 cum for 37.50-13.20mm, 0.35 cum of 13.20- 2.36mm and 0.36 cum of 2.36mm & below size IRC metal with 71.30 kgs of VG30 bitumen ( Procured from State/ Central Public sector undertakings only) for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 75mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 tonne CMP with bitumen boiler, tipper trucks,9m paver finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 of MORTH rev-5.[The Rate Is Applicable Only If It Is Laid By 9M Paver Finisher] (For Profile Corrective course).

PLUMBING AND SANITARY WORKS

Supply and fixing in position white European Water Closet of approved make with low level flushing tank 10 litre capacity of best quality and approved make with 100mm P or S trapwith double flapped rigid PVC seat cover with CP brass hinges etc. complete complying with standard specification and as directed by the Departmental officers (The EWC should be got approved by the Executive Engineer before use on works.

Supplying and fixing in position Indian water closet of size 580 x 440mm, glazed earthern ware of approved quality and colour with 'P' trap or 'S' trap confirming to IS:2556-part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One of Lime, Two of Sand, Five of Brick jelly) 100mm thick and by dismantling brick masonry, reinforced finishing to the required slope and including giving necessary connection to PVC soil pipes cement concrete roof / floor slab and making good the disturbed portion to origional condition without leakage etc., complete complying with standard specification and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works)

Supplying and fixing of CP Two Way Bib Cock with Health Faucet ,wall hook & one metre long flexible tube including cutting and making good the walls wherever required etc complete. complying with standard specification and as directed by the Department officers. The quality and make of health faucet should be got approved by Concern department Engineer before use on work.

Supplying and fixing of Brass Chromium Plated Screw Down including cutting and making good the walls wherever required etc complete. complying with standard specification and as directed by the Department officers. The quality and make of health faucet should be got approved by Concern department Engineer before use on work.

Wash Hand Basin of size 550 mm X 400 mm with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug and Chain, 32 mm dia ' B ' Class G.I. Waste pipe, 15 mm Dia G.M Wheel valve; 15 mm Dia Nylon connection, 15 mm Dia Brass Nipples, 15 mm C.P. Pillar tap etc.,including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers. The quality and make of below counter Wash basin should be got approved by department Engineer before use on work. ( all Inclusive of cost of basin, Bottle Trap and Angle Cock)

Supplying and fixing Lipped Mouth Porcelain Flat Back Urinal(white colour) of size 26.5x31.5x44cm with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple, and suitable screws, shellac etc., complete. The rate including cost of all materials, labour charges for fixing and transportation etc. completed as directed by Engineer-in-Charge.

Providing and fixing in position vertically marble partition in the urinals with Raj Nagar marble stone of white hard, dense hemogenious colour without cracks, and fissures of size (3.0+2.0)5'height thickness varies from 18 to 20mm including making grew in the wall and pointing and packing with cement mortar 1:3 polishing, finishing on both sides etc., as directed at site.

Supplying and fixing Brass Chromium Plated Towel Rail 60cm long and 20mm dia with brackets of same materials including cost of teak wood plug & CP screws etc., complying with standard specification and as directed by the Department officers.

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed Various Sized and 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks) .

Size 600X450X5.5mm Thk

Supplying,installing,testing and commissioning of approved make CONCEALED STOP COCK including neccesary accessories etc, complete,works include making require size curout in wall,and fixing the control box property,redoing the same etc,complete the quality and make of concealed stop cock should be got approved by concern department Engineer before use on work.

Supplying and fixing the best quality approved make of Angle Cock with wall flange including cutting and making good the walls wherever required etc. complete complying with standard specification and as directed by the department officers. The quality and make of angular stop cock ahould be got approved by concern department engineer before use on work

Supplying and fixing the best quality approved make of C.P. Soap Tray/ Dish of size of 150mmx100mm with wall flange including cutting and making good the walls wherever required etc. complete complying with standard specification and as directed by the department officers. The quality and make of angular stop cock ahould be got approved by concern department engineer before use on work

Supplying & fixing in position 15 mm dia brass/ C.P pillar tap (Heavy duty) of approved make conforming to I.S. Specifications & quality including cost of shellac, thread etc., complying with standard specifications & including cutting & threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work).

Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications. (The PVC cowl should be got approved by the Executive Engineer before use on works).

110mm Dia

75mm Dia

Supplying & fixing in position PVC Nahini / Floor trap of size 100x75mm including stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes etc., complete, complying with standard specification. (The PVC Nahini / Floor trap should be got approved by the Executive Engineer before use on works ).

Supplying & fixing in position 150 X 100 mm square mouth 'P' or 'S' trap stone ware Gully trap 'A' grade with cast iron gratings of size 300 X 300 mm with C.I. air tight cover with frames of size 300 X 300 mm at bottom & top respectively with necessary earth work excavation, laid over a bed of brick jelly cement concrete 1:3:6, 150 mm thick using 20 mm size broken brick jelly including necessary block work & plastering, &including dismantling masonry wherever necessary & redoing the damaged portions to the original condition & by using cement concrete 1:3:6 using 20 mm stone jelly for fixing the Gully trap & giving connections to the stone ware sewer line etc., complete, complying with standard specification. (The stone ware gully trap should be got approved by the Executive Engineer before use on works ).

Making Through holes in plain or Reinforced Cement Concrete with Diamond Core drilling system by using Bosch Power Tools of Following Diameter in Various thickness and Dia

100mm Dia 230mm thk

150mm Dia

Supply and fixing RCC precast slab manhole cover SFRC of 50mm thick and required size 900mm x 900mm made in CM 1:3 Ratio both direction including cost and conveyance of all materials, labour and transportation etc complete complying with standard specification.

Supplying and fixing in position the best quality and variety sizes PVC soil and waste pipes 6Kg /10Kg / cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the portions. The quality and make of PVC pipes and specials should be got approved by Concern department Engineer before use on work.

160mm Dia

110mm Dia

75mm Dia

Providing, supplying & laying of Unplasticized Polyvinyl Chloride (UPVC-SDR-11) Pipes conforming to IS 15778 having thermal stability cold water with brass and UPVC fittings like Elbow,Brass Tee, Brass Elbow,Offsets,Tee with clamps @1.00 meters spacing, with jointing of pipes with one step UPVC solvent cement with including cutting of chase including testing of the joints complete and making good the walls etc.Rate is inclusive of all material labour, transportation,tools & tackles all complete as per as per specifications,Concealed work including chase cutting) complete complying with standard specification and as directed by the Departmental Officer.

20mm Dia

25mm Dia

32mm Dia

40mm Dia

65mm Dia

Supplying, laying and jointing CPVC pipes SDR 11(having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. (Internal)

20mm Dia

25mm Dia

32mm Dia

40mm Dia

Supplying & fixing in position first quality & approved variety of various dia U.P.V.C Ball Valves ( Heavy type ) with I.S.I. Mark of the following size including cost of Shellac, thread etc.,including labour for cutting & threading of Pipes etc., complete complying with standard specifications for both internal & external water supply arrangements.

Supplying and fixing in position first quality and approved variety of Gun Metal /brass valve /airrelease valve /Check valve (Heavy type)with ISI mark of the following sizes including cost of Shellac,thread etc,including labour for cutting ,threading and fixing position of CPVC Pipes for both internal external water supply arrangements etc,complete complying with standard specification and as directed by the Department officers. The quality and make of valve should be got approved by Concern department Engineer before use on work

Drilling of 12" dia vertical borewell so as to have a finished size of 6" dia borewell in boulder area to any required depth as decided by the TWAD Board Officers including Transportation from one place to anothr place with in Tamilnadu State by direct or reverse rotary mud circulation method using Contractor's rig tools, fuel, labourers, bentonite mud and water required for drilling at the site shown including construction of mud pit etc. using only calyx rigs.

300mm dia

Drilling 140 / 150 mm dia Pilot Bore upto 60 m depth ending below ground level.

Reaming from 200mm dia pilot bore upto 350mm dia bore as direct by the Engineer incharge From 60 m depth and upto 90 mt depth ending below ground level

Supply the following dia PVC casing pipe with excise duty as per IS 12818 / 1992

200mm dia CS

200mm dia RS

150mm dia RS

Labour charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineer of Departmental officers.

200mm dia CS

200mm dia RS

150mm dia RS

Supplying and filling with river pebbles in annular space between bore and PVC pipe up to hard rock. upto 30m rock level

Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed and conducting yield test by 'V' notch method.

Supply ,erection and testing & commisioning of 2HP submersible pumpset in the to suit 200mm borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge.

Supplying and installing Water Dispenser with the following Specifications. Model Name: P 110 N, Dispensing Capacity: 110 Litres, Storage Tank – Normal Water: 60 Litres, No. of Faucets: 2 Nos, Net Weight in Kg (Approx.): 50 Kg approx., Number of Power Cord: 1 Nos, Power Supply (AC 50 Hz): 230 Vac, MOC - Housing SS 304, MOC – Normal Water Tank: LLTPE, Inlet Method: Float valve with one sediment /Float switch, MOC – Rear cover: 202 stainless steel 0.8mm sheet, MOC - Legs SS 304: 304 stainless steel 0.8mm sheet, MOC – Faucets: Brass Chrome plated, Dimension: 500 mm X 450 mm X 1350 mm, Dispending point: Inner tray type

Construction of Modular type RWH Structure capacity of 4.32 cu.m by using infiltration modules of size 800 x 800 x 360 mm and side wall with infiltration modules of size 800 x 360 x 25 mm including earthwork excavation in bitumen/concrete roads to a size of 1200 x 1200 x 3000 mm and providing base plate, Geo - textile 400mm - 200 micron, Fine filter media 12mm thickness, Coarse filter media 20mm thickness, FRP of 700x700mm (clear opening 600x600mm) (Grating cover with Frame - Medium duty 10 MT), including all labour charges, carting away and drilling bore well 150mm dia upto a depth of 3m with 125mm dia Blue slotted PVC Pipe., complete. (Model 6)

Supply & Fixing of Syntex Tank 3000Ltr Capacity including Loading, Unloading & Transportation

Supply, installation, testing and commissioning of equivalent to Ingersoll Rand Reciprocating Air Cooled Type (10 HP) Rating Vaccum Pump as per following provisions. As per IS 12827 / 1987 & ISO 7396 / 1987 Specification a) Vaccum Pump - 10 HP - 1 No. b) Electric Motor - 10 HP - 1 No. c) DOL Starter with OLR - 1 No. d) Vaccum Switch - 1 No. e) Vaccum Gauge - 1 No. f) Control Frame with Fittings - 1 No. g) Suction Scrubber - 1 No. h) V-Belts - 1 No. i) GI & MS Fittings - 1 No. j) Brass Fittings - 1 No. k) Exhaust Silencer - 1 No. i) Base Frame for Motor and Vaccum Pump - 1 set m) Pilot Line with Fittings - 1 set, Vaccum Room & Air Compressor Room Inside

Supplying & Fixing Pressmatic taps urinal Auto Valve closing systems will accessories

Supply and installation of a open drip kit that consits of 16mm dia drip lines of length 20m connected to 23 m long 37.5 MM HDPE lateral capped at the end per block, as per Engineer instruction.

Supplying & Fixing 1 Hp Pressure pump with priming tank and necessary fittings.

Fire Fighting Works

Supplying & Fixing First Aid Box complete with all First Aid Medicines including Loading, Unloading & Transportation

Supplying & Fixing Shock Treatment Chart fixed in glass frame including Loading, Unloading & Transportation

Supplying & Fixing Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms including Loading, Unloading & Transportation

Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. with Bucket Stand as per standard specifications and as directed by the Departmental Officers

ELECTRICAL WORKS

CT Metering Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars, internal wiring, colour coding, ferrules, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. 1set of 200/5A CT with TNEB Metering provision and 1nos of 200/5A CT for APFCR .

200A Isolator Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of 200A TPN MCCB panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors.

Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel made up of 2mm powder coated MCCB Indoor Type Three Phase Changer Over panel of size (H 1450 X L 1400 X D 400 ) mm with suitable to accommodate 200A 4 pole Three phase Change Over Switch-1No. as incomer for EB Source and as incomer for DG Source , 1no 160A 4Pole MCCB, 6nos of 125A 4Pole MCCB, and 2nos of 63A 4Pole MCCB's, compartment for as O/G supply with the provisions to accommodate Busbar chamber and cable chamber with size of 33x6mm copper busbar 4 runs having three phase Multifunction meter with line indicators and with all necessary accessories with all other connected works etc. The panel made up of 16/18 SWG CRCA sheet steel comprising of 4 sections with separate sheet steel weatherproof and shock proof safety insulation system conforming to IE Rules with IP protection, and with the panel should be painting by powder coating finishing etc.,as complete and making good of the panel with neat finishing. (Switch make : L & T / ABB) panel should be earthing confirming ISI specifications. The panel should be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel as directed by engineer-in charge/department superior engineers. Including Bus bar support, Cost of Weldding charges for mounting the panel, Rotary Handle, Spreader Terminal, Multifunction Meter digital type / MFM 5010 LED meter CI 0.5S

VERTICAL THREE PHASE MCB DISTRIBUTION BOARD WITH MCB : Supply and fixing of 84way vertical TPMCB sheet steel Industrial Type TPMCB DB with IP54 Protection of surface type fitted with bus bars and neutral links with1 No. of 100A FP MCB as Incoming and 12 Nos.of 32A,10KA Triple Pole MCB in Flush with wall and making good of the concealed portion with earth connection.( Industrial Type TPMCB DB with IP54 Protections)

Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating one no. 4 pole incoming 63 A TPN MCB, 10kA, / Isolator and another separate 4 way for accommodating one no. 63 Amps, 30 mA, 4 pole ELCB / RCD (totally 8 ways in one segment) and 24 nos 6-32 A, 10kA, SP MCB / Isolators ( totally 24 nos.) for outgoing in 3 segments with label holder and provision for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 25A FP ELCB switch as incoming and 4 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonry pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED Street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour

Supply and Fixing of 40W 4' LED Tube Light with PVC unsheathed copper leads from terminals to the fitting. (Make : Philips/Crompton/Havelles )

Supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 2.5 metre down rod with fan clamp, and wiring to the near by point with 1.5 sqmm FRLS , PVC insulated copper wires, including necessary accessories and hardware's as required.

Supply and fixing of 300mm(12")sweep (Heavy duty) AC Exhaust fan complete with necessary wall opening and making good of the wall and wiring to the near by point with 1.5 sqmm FRLS PVC insulated copper wires including necessary accessories and hardware's as required.

Supply and fixing of louvers shutter arrangements for 300mm(12")sweep (Heavy duty) AC Exhaust fan complete

Supply and Fixing of Cove LED Light (10W) on floor or Ceiling with Mounting accessories ( IP20 & IP44 ) Complete etc,. (Make :Philips/ Klite /Crompton/Havelles )

Supply and laying of following XLPE armoured LTUG cable in a trench/Tray with suitable cable tie tag etc as required.

Supply and laying of 31/2 core 120 Sq.mm PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 3 1/2 x 95 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 31/2 x 25sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 4C x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 4C x 6 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 4C x 4 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 3C x 2.5 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supplying & Laying HDPE Pipe as per requirements including excavation & refilling.

Supply and fixing of double compression brass cable gland for following Aluminium conductor XLPE insulated armoured cable of 1100 V grade with earth connection.

Supply and fixing of brass cable gland for 3 1/2 C x 120 Sq.mm PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland for 3 1/2 C x 70 Sq.mm PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland for 3 1/2 C x 50 Sq.mm PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland for 3 1/2 C x 35 Sq.mm PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland for 3 1/2 C x 25 Sq.mm PVC LTUG armoured cable with earth connection

Supply and fixing of brass cable gland suitable for 4C x 16 PVC armoured LTUG cable with earth connection.

Supply and fixing of brass cable gland for 4C x 6 sqmm COPPER cable LTUG cable with earth connection.

Supply and fixing of brass cable gland for 4C x 4 sqmm COPPER cable LTUG cable with earth connection.

Supply and fixing of brass cable gland for 3C x 2.5 sqmm COPPER cable LTUG cable with earth connection.

Supply and providing cable end termination of the following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (copper sockets for copper cables and Alu. Sockets for alum. Cable)

Supply and providing cable end termination of 3 1/2 Core x 120 Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and providing cable end termination of 3 1/2 Core x 70 Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and providing cable end termination of 3 1/2 Core x 50Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and providing cable end termination of 3 1/2 Core x 35Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and providing cable end termination of 3 1/2 Core x 25Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and providing cable end termination of 4 C x 16sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.

Supply and providing cable end termination of 4 X 6 Sqmm PVC LTUG Copper cable with necessary copper cable sockets by crimping etc, with electrical connection complete.

Supply and providing cable end termination of 4C X 4 Sqmm PVC LTUG Copper cable with necessary copper cable sockets by crimping etc, with electrical connection complete.

Supply and providing cable end termination of 3C X 2.5 Sqmm PVC LTUG Copper cable with necessary copper cable sockets by crimping etc, with electrical connection complete.

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End

Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point ( 8 points / Coil) Higher End

Supply and Run of 4 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.

Supply and Run of 2 Run x 2.5 sqmm and 1R of 1.5sq sqmm PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable Pvc conduit pipe on concealed wall and ceiling with continuous earth wire connection with painting of suitable colour.

Supply and fixing of thermoplastic loop - in and loop out boxes with lid of dimension min 104X104X70MM with 20A connector. shorting link 2 way necessary and along DIN rail terminal block. The Junction Box shall be insulated and made out of high grade thermoplastic. The JB shall be IP Rated for outdoor applications, environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid& anti corrosive. The JB shall be rated for Degree of Ingress Protection IP 65 in accordance with IEC 60529.

Supply and fixing of 1no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Scope cover wall cutting , grouting , flushing and making good on the wall. Higher End.

Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Scope cover wall cutting , grouting , flushing and making good on the wall. Higher End.

Supply and fixing of manufacturer's GI metal back box and 3 nos of 6A modular switch, 3nos of 6A 3 pin combined modular type wall socket in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, in flush with wall.

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Scope cover wall cutting , grouting , flushing and making good on the wall. Higher End.-

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 50mm and 2 mtr long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs of carbon based environment friendly backfill compound and suitable clamp and with copper earth plate of size 125mm x 50mm x 6mm with necessary funnelling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply, Installation, Testing and Commissioning of earthing station consisting of 600 x 600 x 3 mm. thick, copper Plate earth electrode, back filling with alternate layer of charcoal, salt, brick masonry work for chamber 450 x 450 mm. heavy duty CI cover, watering pipe, funnel and earthing conductor as per IS:3043 specification. All civil works required such as excavation in all types of soils, rocks, PCC Earthing Chamber foundation, reinstatement and making good the surface to match original, removal of surplus earth etc. are included.

Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth.

Supply, fabrication, of GI /Copper earth flat of following size in provided trench, clamping in wall, ceiling, with suitable Clamps/ saddles, connecting the joints through bracing / welding covering with termination in the earth pits, Panels, Distribution boards and equipments with bitumen paint including accessories wooden plugs, screws, fastener etc., all inclusive

Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and run of 25mm x 6mm GI flat with necessary clamps / supports on wall / floor / ground for earth connection

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and Run of 1 of No.8 SWG GI wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and Run of 2 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with painting of suitable colour.

Supply, Installation, Testing and commissioning of 40 channel 8 SATA NVR, with 6T Hard Disk Drive 4 nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency, Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces.

Supply, Installation, Testing and commissioning of 16 channel NVR with 4TB HDD * 4nos, Up to 20-ch 8 MP IP cameras can be connected, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by up to 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1/VGA1 outputs provided  HDMI1 Video output ) resolution Storage and Playback, Up to 4SATA interfaces and 1 eSATA interface for HDD connection, Support upto 6TB capacity for each HDD, Smart search for efficient playback. (Make: Hikvision/Dahua/Panasonic)

Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification: ●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behaviour analyses ( Line crossing detection, intrusion detection) ● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied ●On-board Storage - Built-in micro SD/SDHC/SDXC card slot, up to 128 GB, ● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W ● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. All including suitable camera stand and accessories. (Make: Dahua/Panasonic)

Supply, Installation, Testing & Commissioning of IP Network TDN Low-Light IR Dome Each Cameras, 1/2.8" CMOS,4 MP 2592 x1520 or better , triple stream, Min. Illumination required 0.005 Lux/F2.0 (Color,30IRE), 0 Lux/F2.0 (IR ON), 140dB True WDR, triple stream,3 to 12 mm, F1.4 to 2.8 , MFZ, Backlight Compensation, Highlight Compensation 3DNR, Privacy Mask, Internal/External Smart IR LEDs with up to 50m IR distance, H.265& |MJPEG, Inbuilt Video Analytics: Smart Motion Detection, Intrusion Detection, People Counting, Multiloitering, Face Detection, Line Crossing, Missing Object detection, [Unattended Object Detection. THe camera shall have inbuilt cyber security FIPS Chipset.Audio Stream Full Duplex, 1TB SD card support, IP 67 & IK10, Alarm: 1 In & 1out, PoE, H.265 High Profile and MJPEG, PoE Class . Certifications: ONVIF Profile S,G,T & M compliant, NDAA 889 UL, CE, EN, FCC & RoHS compliant and with all accessories and as per detailed tender specifications.

Supply, Installation, Testing and Commissioning of 55" smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS panel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANR h) True colour generator i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remote p) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung).

Supply and Clamping of CAT 6 armoured cable in suitable PVC Pipe 1" thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal) IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.

Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.

Supply and fixing of POE 24 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line.

Supply and Fixing of Rack with Accessories -Higher end 36 U Rack with LNS unit and fan extra for the above rack.

Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up

Supply & Fixing 50W Led Light Model: K-Lite KL-7030 Angle Dixon, Dimension : 865 x 785 x 3660mm, Wattage : 50W LED. NOTE: (i) LED: 2700K,3000K,4000K,5700K (ii) Product Finish: Jet Black

Supply & Fixing of 24w LED Light Model: K-Lite KL-7036 Column Light, Dimension : Ø166 x 2700mm, Wattage : 24W LED. NOTE: (i) LED: 2700K,3000K,4000K,5700K (ii) Product Finish: Graphite Grey, Anthracite grey, Jet Black

Supply & Fixing 6W Led Light Model: K-Lite KL-2747 Wall-Recess, COD (mm) : 124 x 83 x 70, Wattage : 6W LED. NOTE: (i) LED: 2700K,3000K,4000K,5700K (ii) Product Finish: Jet Black

Supply & Fixing 6W Led Model K-Lite KL-4267, Luminaire dimension : 113mm length x 100mm width x 451mm height, Beam angle 15° / 25° / 40°, Wattage : 60W LED. NOTE: (i) LED: 3000K, 4000K, (ii) Product Finish: Jet Black

Supply and Fixing 100W Led Light Model K-Lite KL-1038 , Dimension : 100x200x50, Pole height: 9m, Pole size: Sq100, Arms:4 Wattage : 100W LED. NOTE: (i) LED: 2700K,3000K,4000K,5700K (ii) Product Finish: Jet Black

Supply & Fixing 20W RGB Led Light Model: K-Lite KL-3561 Translucent polyurethane encapsulation., Dimension : 1005 x 25 x 32 , Wattage : 20W LED. NOTE: (i) LED: 2700K,3000K,4000K,5700K (ii) Product Finish: Graphite Grey, Anthracite grey, Jet Black

Supply & Fixing 40W RGB Led Light Model: K-Lite KL-3561 Translucent polyurethane encapsulation., Dimension : 1005 x 25 x 32 , Wattage : 20W LED. NOTE: (i) LED: 2700K,3000K,4000K,5700K (ii) Product Finish: Graphite Grey, Anthracite grey, Jet Black

Supply & Fixing 20W Led Light Model: K-Lite: Leva-4, KL-4319, Lluminium alloy (grade 6063), 3000K,RGBW BA:2°,20°,10°x30°, Clear Toughened GlassFinish: Pure polyester powder coated grey

Supply & Fixing 30W Led Light Model: K-Lite: Navi, KL-4287, Dimension :329 x Ø166 x 160mm , Wattage : 30W LED. NOTE: (i) LED: 2700K,3000K,4000K,5700K BA:45°,28°,10°, Polycarbonate Optical Lens (ii) Product Finish: Graphite Grey, Anthracite grey, Jet Black

PA SYSTEMS

Supply,installation, testing and commissioning of 30W High efficiency ABS horn loudspeaker with weather protectin IP 65 Max Power : 45 W, Rated power, 30 Watts, Power tapping, 30/15/7.5W-Effective frequency range (-10 db) (-380 Hz to 5 kHz) - SPL at rated power (1 khz) 126 dB- Self extinguishing acc. to UL 94 VO - IP 65 acc. to IEC 60529, safety acc. to EN 60065. (Make - BOSCH)

Supply, installaion, testing and commissioning of 240W mixer amplifier with following features : inbuilt bluetooth for audio streaming, sports audio playback from USB pen drive, 4 microphone/line inputs, plus music source input, insert features to use as a pre/power amplifier, Optional 2 tone chime generation for input 1 technical specifications - Frequency response 80 Hz to 18 kHx (+1/-3 dB W - 10 dB ref. rated output) - Distortion <1% @ rated output power, 1 kHz bass control Max +/- 8 dB Treble control max +/- 8 dB. (Make - BOSCH)

Supply, installation, testing and commissioning of 480W Power amplifier in a 3U high housing with 70V / 100V and 8 Ohm outputs, Dual inputs with priority switching, 100V input for slave operating on 100V speaker line, Mains, battery backup, with following features -Output ower (rms) 480W, - Frequency response 60 Hz to 18 kHz (+1 / -3 dB at -10 dB ref rated output) - Distortion <1% @ rated output power, 1 kHz, - S/N (flat at max volume) > 90 dB - Batter power supply 24 VDC (Make BOSCH) (Market rate)

Supply and installation of Handheld microphone with a dynamic transducer element that shall be designed for high speech intelligivility. It should have a rugged enclosure is both stylish and easy to use in a wide range of public and sound reinforcement applications. Polar Pattern unidirectional, frequency range 80 hZ to 12 kHz, Sensitivity 1.7mV/Pa +/- dB, Rate out impedance 600 Ohms. (Make BOSCH) (Market rate)

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., asper standard methods and as directed by the Departmental Officers.

Softscape Works

Planting Soil Works

Supply & stacking of red earth at site to the departmental guage for pre-measurements which is of light textured, crystalline, porous and friable and not of generally acidic or neutral but not of alkaline and should be fertile, including seignior age charges, cost of transportation, loading, unloading, stacking and inclusive of all taxes etc., complete.

Supply and stacking of pit sand / earth filling sand at site to the departmental guage for premeasurements obtained from sand deposits and should clean without solid particles

Supply of well decomposed Farm yard Manure in a powdery form, devoid of soil sand, stones, plastics and other materials, highly nutrient and which supports plant growth.

Mixing charges of Red soil, sand and Farmyard manure uniformly (1:1:1) for Preparation of soil mixture (excluding material cost)

Ground Cover

Planting of Chlorophytum ornamental foliage Ground cover variety in Polythene bag of size 6x7 inch the rate including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Verbena foliage Ground cover variety in Polythene bag of size 6x7 inch the rate including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Lilly – Zephyranthus lilly (Rain lilly)shrub variety of height 30-45 cm in polythene bag of size 6x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge

Nursery Works

Supplying and Planting of sapling of Barringtonia Acutangula height 245-300cm (8'-10') in polythene bag including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Supplying and Planting of sapling of Mimusops Elengi height 245-300cm (8'-10') in polythene bag including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Supplying and Planting of sapling of Pongamia Pinnata height 245-300cm (8'-10') in polythene bag including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Supplying and Planting of sapling of Terminalia Arjuna height 245-300cm (8'-10') in polythene bag including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Supplying and Planting of sapling of Mitragyna parvifolia height 245-300cm (8'-10') in polythene bag including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Shrubs+Herbs+Grass+Creeper

Supplying and Planting of Heliconia collinsiana/ schiedeana plant variety of height 60-75cm (2'-2'6") in polythene bag of dia 60 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Alpinia purpurata Plant foliage shrub variety of height 60-75cm (2'-2'6") in a polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Aspidistra elatior Plant foliage shrub variety of height 30-45cm in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Acorus Calamus Plant foliage shrub variety of height 23cm (9") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Colocasia esculenta Plant foliage shrub variety of height 60cm (2') in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Cyperus alternifolius Plant foliage shrub variety of height 60cm (2') in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Cuphea Hyssopifolio Plant foliage shrub variety of height 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Salvia Officinalis Plant foliage shrub variety of height 23cm (9") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Lawsonia Inermis Plant foliage shrub variety of height 60-75cm (2'-2'6") in polythene bag of including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Impatiens Plant foliage shrub variety of height 15cm (6") in polythene bag of including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Canna Indica Plant foliage shrub variety of height less than 60-900cm (2'-3) in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Saccharum Spontaneum Plant foliage grass variety of height less than 30-45cm (1'-1'6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Begonia Plant foliage grass variety of height less than 23cm (9") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Hibiscus Hawai Plant foliage grass variety of height less than 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Hymenoallis Lily Plant foliage grass variety of height less than 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Caladium Plant foliage grass variety of height less than 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Nerium Oleander Plant foliage grass variety of height less than 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Ixora Dwarf Plant foliage grass variety of height less than 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Senna Articulata Plant foliage grass variety of height less than 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Vinca Rosea Plant foliage grass variety of height less than 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Hygrophilia Auriculata Plant foliage grass variety of height less than 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Zephyranthus Lily Plant foliage grass variety of height less than 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Pandanus Plant foliage grass variety of height less than 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Cymbopogon Citratus Plant foliage grass variety of height less than 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Vetiver Plant foliage grass variety of height less than 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Ground Covers

Planting of Tradescantia Spathacea Plant foliage shrub variety of height 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Aquatic Plants

Planting of Centella Asiatic Plant foliage shrub variety of height 5-15cm (3"-6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Eclipta prostata Plant foliage shrub variety of height 5-15cm (3"-6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Ipomoea aquatica Forsskal Plant foliage shrub variety of height 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Supplying and Planting of sapling of Bauhinia Purpurea height 245-300cm (8'-10') in polythene bag including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in -charge.

Planting of Dianella Ensifolia ornamental foliage Ground cover variety in Polythene bag of size 6x7 inch the rate including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Verbena Officinalis, ornamental foliage Ground cover variety in Polythene bag of size 6x7 inch the rate including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Pennisetum Setaceum Plant foliage grass variety of height less than 30-45cm (1'-1'6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Pennisetum Rubrum Plant foliage grass variety of height less than 30-45cm (1'-1'6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Wedelia trilobata Plant foliage grass variety of height less than 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Mussaenda erythrophylla Plant foliage grass variety of height less than 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

Planting of Russelia Equisetiformis Plant foliage grass variety of height less than 15cm (6") in polythene bag including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.

S J INFRA (BID ID -1116759)