Drilling of 175 mm dia and 150 meter deep with installation submercible motor pump set including Elctrification work Complete at different Location in ward No. 42 (Maulik Nidhi) file No. 23/26X9/1. 3rd Call

Drilling of perfectly vertical bore hole of a diameter suitable to receive 175 mm nominal diameter casting pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 175 mm nominal diameter M.S./G./I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete (a) In all type of collapsible strata consisting of soils, clays, sand, moorum gravel, boulders etc.

Drilling of perfectly vertical bore hole of a diameter suitable to receive 175 mm nominal diameter casting pipe upto desired depth below ground level inclusive of the labour charges for transporting, lowering and fixing of 175 mm nominal diameter M.S./G./I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete (b) In all type of rocks.

Drilling of perfectly vertical bore hole of 175 mm diameter upto desired depth below ground level in all types of rock including all works partaining to drilling such as transportation , installation and removal of drilling machine etc. complete

Supply of I.S.I. marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per I.S. 1239 (Part-1 & Part-2) 2004/2011 with (Upto-date amendments)

Providing and fixing of well cabe on top of the tubewell for protection. For 175 mm dia

Supply & installation of Energy efficiant five star BEE rating ISI Marked required capacity of Three phase, 50 Hz, 415 V, deep well submersible pump steel body, suitable for 6" tube well with control panel starter suitable for submersible pump with dry run protection , single phase preventer, connection, including clamps, bore cap etc. as required as per specifications but excluding pipe and connection cable. For 10 HP Head Mt. 147-64 Discharge LPM 60-270

Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make for 4.0 sqmm multi strand.

Providing laying and jointing of following galvanized iron (MS) pipes with spccials (such as vends, elbows, tees etc.) class light, medium & heavy including testing of joints, cost of pipes, specials and jointing materials all complete. Pipes and sockets conforming to IS-1239/2011 Part-II.For 50mm dia medium class.

Providing, laying, jointing & field testing of High density polythylene pipe (HDPE) confirming to IS:4984/ 14151/12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/heater to the required temperature and them pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ But fusion machine. (50 mm & above fusion jointed & below 50 mm meachanical jointed) 90 mm dia 6 kg/cm2 for laying of cable from tubewell to starter to be fixed in penal protection box.

Providing & fixing cast iron double flanged single door reflux (non return) valves including jointing & testing with cost of jointring material such as bolts, nuts and rubber insertion all complete as per IS:5312 (Part-I), 50mm dia CLASS PN 1.0