PROVN OF PARACHUTE DRYING SHED WITH ALLIED WORKS IN JOR MIL STN

Amount

Total amount of Sch 'A' Part-I Building Works Note :- This schedule is not pre-priced by MES and the rate indicated as "Rs. 0.00" under column 6 signifies this fact only.

Design, Fabrication and Construction of PARACHUTE DRYING ROOM in RCC Framed Structure as per Arch Drg No. CWE/DIN/10/23 sheet No. 1/3 to 3/3 dated 07.09.2023 and specification given in Sch A Notes and Particular Specifications including complete RCC foundation and plinth, Flooring, Joinery and Finishes complete all as specified.

NOTE: Schedule ‘A’ Part II to VI are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured.

Total amount of Sch ‘A’ Part II (Excavation, Earthwork & Site Clearance)

Total amount of Sch ‘A’ Part III (Internal Electrification)

Total amount of Sch ‘A’ Part IV (External water supply)

Total amount of Sch ‘A’ Part V (Hard standing and Area Drainage)

Total amount of Sch ‘A’ Part VI (External Electrification)

SCH 'A PART VII (Miscellaneous B/R and E/M works) Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 6 signifies this fact only

Supply and fix cable entry terminal box for bollard light made of PVC of size (155X210X92) mm IP 55/65 degree of protection brackets provided inside to facilitate DIN rail along with cable entry incl bracket for mounting incl necessary DIN channel fixed and connection complete all as specified and as directed (Make Hensel Electric Cat No. DK 1616G or equivalent make given in Appx B)

S & F bulb angular / batten holder PVC/Polycarbonate suitable for batten fittings including one No. LED lamp of 9 watt of

S & F new 20 watt surface and wall mounted LED batten with polycarbonate housing and intigrated Make Havells Cat No. LUMILINE + BS20WLED 830SPCSS or equivalent make given in Appx B complete all as specified and as directed.

S & F of MCB SPN 40 Amps 'B' series 10KA 240volts complete all as specified and as directed.

S & F of MCB SP 6-32 Amps 'B' series 10KA 240volts complete all as specified and as directed.

Supplying, installing, testing and commissioning compact Dehumidifier of capacity 300cubic meter per hour (CMH) to achieve the design conditions as as specified, (process ESP-200 pa, Motor-0.1 KW), (React ESP-100 pa, Heater-3.6 KW, air flow-300 CMH. Motor-0.75 kW) suitable to absorb moisture in dehumidifier sector by the Eco dry rotor and exhausted in the reactivation sector by a stream of hot air in a counter flow, following the reactivation process, the absorption sector again ready to absorb the moisture. The two process of "Moisture absorption" and "reactivation" are taking place with separate airflow continuously and simultaneously, positive sealing between chambers presents mixing of the process and reactivation air stream, including, commissioning and testing by rep of Original manufacturer also including of all connections and making holes for inlet and outlet vent pipe if any type and size of wall and making good the disturbed surface match with the existing surface after installation complete all as specified and directed (Make-Bry Air Model No FFB-300 or equivalent model of Make FISAIR or SEIBU GIKEN DST or equivalent)

Material and labour for ladder wheeled, Height of the ladder shall be 10 ft long, bottom base of ladder shall bemade up with MS flat iron 5 mm thick, MS tube frame of size should be 32X25X1.6 mm thick, lifting support rail shall be 25 mm dia MS pipe 1.6 mm thick, number of steps shall not be less then 11 steps step size 18''X 6''X 3 mm thick, Painting shall be done with one coat of primer and two coat of black synthetic enamel paint All as per shown on drawing TP and Engg- in- charge.

Chief Builders &Consultants

M/S S.B. Singh and Sons

M/S R G Construction