WARD NA0 26 MOH. GOVINDAPURI MEIN VIVEKANAND CHAURAHE SE ASHOK CHAUHAN SE BIJALI GHAR SE PANT PARK SE TANU MEDICAL STORE TAK HOTAMIX SADAK VA SIDE PATARI PAR INTERLOCKING KA NIRMAN KARY.

Providing laying, spreading and compaction stone aggregates of 22.4-53 mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling wih smooth wheel roller 80-100 kn

Providing and applying tackcoat with VG-10 bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg. per sqm. On the prepared bituminous/ granular surface cleaned with mechanical broom.including all type of materials, labour, tools & plants, taxe, octroi ,vat ,toll,etc.but excluding GST for proper completion of work as per direction Engineer-in-charge.

Providing laying, dense graded bituminous macadam with higher capacity batch type HMP using grushed aggregates of specified grading, premixed with bituminous binder (VG-30) @4.5 per cent by ewight of total mix and filler

(BC Gr-II) Providing and laying bituminous concrete (Gr-II) with Higher Capacity batch type hot ,ix plant using crushed aggregates form approved quarry of specified grading, premixed with bituminous binder (VG-30) @5.40 percent of mix

Dismantling of old brick laid on flat kharanja including stacking of old bricks.(Old Tiles Road) including all type of materials, labour, tools & plants, taxe, octroi ,vat ,toll,etc.but excluding GST for proper completion of work as per direction Engineer

Construction of granular sub base by providing well graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achive desire density complete as per technical specification clause as per MORD 401

Laying of 80 mm thick precast cement concrete I- shaped interlocking paver blocks with top layer of minimum 8 mm thickness having plan dimension 200x(160+120)mm O.P. cement, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 30MPA (M-30) and weight 5.0 Kg per no . confirming to IS:15658-2006 including all and i/c 4cm sand layer

Supply and Laying of 80 mm thick precast cement concrete I- shaped interlocking paver blocks with top layer of minimum 8 mm thickness having plan dimension 200x(160+120)mm O.P. cement, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 30MPA (M-30) and weight 5.0 Kg per no . confirming to IS:15658-2006 including all and i/c 4cm sand layer

Providing & Fixing of granite inaugration stone for display board including of all work complete

Add 18 % GST Amount