CONSTRUCTION OF BOUNDRY WALL ( ALONG SERVICE ROAD ) AT I.A. CHINHAT DISTT. LUCKNOW

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Providing and laying Cement concrete 1:4:8 (1Cement :4 Coarse sand : 8 stone ballast 40 mm nominal size) and curing complete including cost of for work in foundation and floors.

Class-150 brick work in 1:4 cement and coarse sand of 1.25 fineness modulous motar in fondation and plinth including supply of all materials, labour and tools and plants etc. required for proper completion of the work.

Brick work with common burnt clay (non modular) bricks of class -150 in superstructure above plinth level up to floor V level in all shapes and sizes I n CEMENT MORTAR 1:4

R.C.C. work with cement approved coarse sand and 2cm. (3/4") gauge approved stone grit in the proportion 1:1.5:3 (1 Cement:1.5 coarse sand :3 stone grit 20mm aggregate) in slabs of doors and windows excluding supply of reinforcement and its bending but including its fixing and binding the same necessary with 24 BWG binding wire and including necessary centering and shutteing etc. and also including supply of materials sabour and tools and plants etc. required for proper completion of the work strength of the concrete shall not be less than M-200.

Mild steel or iron in plan work shch as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorized overlapping shall be measured up to floor two level

12 mm thick Plaster with cement motar in proportion of 1:2 cement and coarse sand.

Providing and applying white cement based putty of aveage thickness 1mm of approved bradnd and manufacture, over the plastered wall surface to Prepare the surface even smoothy complete

Finishing wall with Acrylic smooth exterior paint with silicone additives of required shade old work applied @1.43ltr/10sqm) over existing cement paint surface (apex ultima , weather coat All guard).D.S.R-13.112.2

Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand(zone-Ill) : 4 graded stone aggregate 6mm nominal size), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixed and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the, sills and soffits