SPECIAL REPAIR TO BLDG NO. T-104 AT KARU AND SPECIAL REPAIR TO BLDG NO. T-61 T-62 AT KIARI AND PROVN OF EXISTING LT OVERHEAD LINE FROM DOGRA FORT TO ARMD BDE PRO UNIT AND SPL REPAIR/REPLACEMENT OF EXTERNAL UG CABLE AND PANELS AT KIARI AREA UNDER GE

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thick type B1 PCC 1:2:4 (using 20mm graded crushed stone aggregate) as in sub base complete all as specified and directed by Engr-in-Charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick screed bedding in CM 1:6 for laying floor finishes receiving floor tiles complete all as specified and directed by Engr-in-Charge.

M&L for Glazed ceramic tiles 450x300x7mm thick coloured/shaded as in vertical surfaces such as skirting dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the surface with 10 mm thick backing coat rendering (1:4) complete all as specified and directed by Engr-in-Charge.

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.

M&L for veneered decorative plywood 6mm thick (5 Nos of ply) grade 1 (with BWR resin) with decorative face veneers one face fixed with nails to timber frame work complete as in wall paneling complete all as specified and directed by Engr-in-Charge.

M&L for veneered decorative plywood 4mm thick (3 Nos of ply) grade 1 (with BWR resin) with decorative face veneers one face fixed with nails to timber frame work complete as in ceiling complete all as specified and directed by Engr-in-Charge.

M&L First class soft wood sectional area not exceeding 6 sqcm Moulding as in cornices, picture rails and the like , secured with nails or brads complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. in framed work under 40 sq. cm in section complet all as specified and directed.

M&L second class hard wood timber scantling plain fillets, square, rectangular or triangular in section clear swan, sectional area exc 6 sqcm & not exc 13 sqcm, secured with nails or brads complete all as specified and as directed.

Taking down chowkats or frame exc 1.5 Sqm and n exc 4 sqm with shutters without taking of shutter from the frame complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frame not exc 1.5 Sqm with shutters without taking of shutter from the frame complete all as specified and directed by Engr-in-Charge.

S&F Plain solid straight chowkats or frame rounded or chamfered put together with glue pined at joints with 2nd class hard wood complete all as specified and directed by Engr-in-Charge.

S&F 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr in Charge.

S&F 30mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F 150mm extruded aluminium handle complete all as specified and directed by Engr-in-Charge.

S&F MS butt hinges medium weight cold rolled mild steel size of hinges 100 mm complete all as specified and directed by Engr-in-Charge.

S&F 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy barrel tower bolt of extruded type 150 mm long complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy barrel tower bolt of extruded type 75 mm long complete all as specified and directed by Engr-in-Charge.

S&F 4mm thick sheet glass ordinary quality and glazing with aluminium snap beading on aluminium frame for door/window and ventilator in square n exc 0.5 sqm each complete all as specified and directed by Engr-in-Charge.

M&L preparation of untreated new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on wall, ceiling, roof etc incl raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

Demolition of stone/PCC block/boulder masonary built in cement mortar including all quions , arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles.

M&L for Pre-cast cement concrete block masonry Type C-1 (1:3:6) using 20mm graded crushed stone aggregate with solid blocks ,exc. 10cm in width and setting inn mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:4 and finishing the surfaces even and smooth (without using extra cement) complete all as specified and directed by Engr-in-Charge.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for preparing old surfaces including priming plastered and other surfaces with alkali resistant priming paint and applying two coats of cement base paint complete all as specified and as directed.

M&L for preparing newly plastered surfaces and applying two coats of white wash on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces and apply two coats of cement base paint with primer complete all as specified and directed.

M&L for preparing old plastered surfaces and applying two coats of cement base paint on walls with primer complete all as specified and directed.

S&F in repair PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with 32 mm dia flush pipe connecting to squatt pattern etc. ISI approved complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous china ( EWC) pedestal pan and trap , including connection to drain ( or outgoing pipe ) and to flushing pipe antisyphonage pipe, with seat cover etc complete including concrete and making good to floor complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china Wash hand basin, white, flat back size 550 x 400mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32mm size bore of pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F in repair Toilet paper holder of stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engr-in-Charge.

S&F in repair stop valves / angular valves 15mm bore chromium plated, cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-Charge.

S&F in repair bib taps 15mm dia cast copper alloy with crutch or butter fly handle fancy type screwed down for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC connection 15 mm bore 450mm long with screwed socket of brass on both ends and rubber washer complete all as specified and directed by Engr-in-Charge.

S&F in repair of soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.

S&F in repair brass chromium plated Tubular Towel rail 20 mm dia D type 60 cm long complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints fixed to walls including dismantling of existing pipe complete all as specified and directed.

S&F in repairs 110mm PVC (SWR) bends any radius complete all as specified and directed.

Taking up and down GI tubing and connection including cleaning for re-fixing or removing to store 20mm bore of pipe complete all as specified and directed by Engr-in-Charge.

S&F 20mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering or wall etc complete all as specified and directed by Engr-in-Charge.

S&F 0.50 mm thick Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet, of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified and directed by Engr-in-Charge.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge.

M&L for readymade soft wood wall panelling in strips of 100 mm width 10mm thickness having lounge and groove fixing arrangements fixed to wooden frame work(Size of frame work 1.2X1.2 C/C included ) as per manufacturers instruction including polishing complete all as specified and as directed by Engr-in- Charge . Note : if necassary size of the frame work/ wall paneling will be changed as per site requirement.

S&F grid false ceiling GI system powder coated prelude main runner section 32x24x0.30x3600mm, cross tee 25x24x0.30x1200mm, wall angle 24x24x0.40x3000mm and including providing and fixing PVC pre-laminated in frontside and aluminium foil backed gypsum tile board of size 595 x 595 x 8-9mm fixed in ceiling frame work with necessary fastening GI wire and cleats complete all as specified and directed by Engr-in-Charge.

S&F coloured PVC designer modular wall cladding 5 to 6 mm thick with air gap, installed with necessary fixing GI channel or frame with end joints on edges (designed colour patterns as per directions of Engr - in- charge). The frame work will be fixed to wall using aluminium screws complete all as specified and as directed by Engr-in- Charge . Note : if necassary size of the frame work/ wall paneling will be changed as per site requirement.

M&L second class hard wood timber scantling bull?nosed, splayed,chamfered or rounded on one edge or face, secured with nails or brads, sectional area exc. 3 Sq cm n.exc 6 Sq cm secured with nails or brads.

S&F in repair SDC Laminated flooring 8mm thick of any coloured, manufactured by Direct Pressure Laminated (DPL) wherein the empty Abrasive aluminium oxide overlay alongwith metamine impregnated decorated film is directly fused with the back with flooring locking profile in designed with double click locking system on the length and single locking width alongwith desire locking strength laid over 1mm thick foam base, complete including removal of existing flooring, all as directed by the Engr-in-Charge.

Taking down shutter of any description not exc 1 sqm each complete all as specified and as directed by Engr-in-Charge.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welde complete all as specified and as directed by Engr-in-Charge.

S&F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 250 mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips all as directed.

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C2 (Using 20mm graded aggregatre) as in plinth protiction/ pcc path complete all as specified and as directed.

S&F 0.50 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275.complete all as specified and directed by Engr-in-Charge.

S&F 0.50 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

Dismantling wrougth iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed by Engr-in-Charge.

M&L preparation of new or previously untreated steel surface apply one coat of red oxide, zinc chrome and two coats of synthetic enamel (ordinary tint) paint any description, over 10cm in width or girth,not otherwise described complete all as specified and directed by Engr-in-Charge.

S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe) and waste pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc complete and removing all retrieved materials such as fitting & fixture from the site and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

M&L for point wiring complete for one light point / exhaust fan point / bell point controlled by one 1-way switch/ bell push, with 1.5 Sq mm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl Metal flush box of suitable size for fixing modular switches / sockets etc and making good surface by wall panelling etc complete all as specified and directed by Engr-in-Charge.

Description all as per item Srl No. 73.00 here in before but for one 3 pin socket outlet 5 Amp on same board complete all as specified and as directed by the Engineer-in-Charge.

Description all as per item Srl No. 73.00 here in before but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

Description all as per item Srl No. 73.00 here in before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

Supply and fixing in replacement switch piano flush button single pole one way 5 Amps complete all as specified and as directed by Engineer-in-Charge.(Make:Anchor / SSK / Leader)

Supply and fixing in replacement switch, socket combination 2 in 1, 5 Amp, flush type completeall as specified and as directed by Engr-in-charge.(Make:Anchor / SSK / Leader)

Supply and fixing in replacement switch socket combination multi purpose 2 in 1, 3 pin 5A/16A, 5 in 1 flush type complete all as specified and as directed by Engr-in-charge.

Supply and fixing in replacement angular lamp holder, PVC/Polycaronate type with back plate suitable for 9/13/15 watt LED bulb for batten fittings complete all as specified and directed by the Engineer-in-Charge.

Supplying and fixing in replacement LED 9/13/15 Watt complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing in replacement LED batten lights fitting 1x 20W, 220V,AC decorative type including LED tube light connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in replacement new energy saving LED Bulk head fitting 10/12 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK07 as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified and as directed by Engr-In-Charge.

S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling 3000K including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed by the Engineer-in-Charge.

S&F in replacement of round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light 3000 K complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing in replacement sheet Metal enclosure single shutter type for DB’s 240 Volts Single Pole and Neutral 8 way with 200 Amps rated bus bar complete including wooden board of required size duly painted with matching colour paint all as specified and as directed by the Engr-in-charge.

Supply and fixing in replacement MCB single pole and neutral 32 to 40 Amps , 240 volt, 10 KA, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing in replacement MCB single pole 6 to 32 Amps, 240 volts, 10 KA complete all as specified and as directed by the Engineer-in-Charge.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR Part-I 2009 and connecting to CBDB’s as specified or indicated including testing on completion .

M&L for point wiring complete for one light point / exhaust fan point / bell point controlled by one 1-way switch/ bell push, with 1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and stranded copper conductor cable ISI marked and PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers with and including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing modular switches / sockets etc and making good surface by wall panelling etc, complete all as directed. Note : 1. In case cutting & chasing of conduit is encountered with any beam / column, the PVC casing & capping or surface conduit will be used to avoid any damage to the RCC portion. 2. No cutting & chasing shall be done on ceiling surface for laying PVC conduit for ceiling fan point wiring etc, hence the PVC casing & capping or surface conduit will be used for the same.

Description all as per srl item No. 91.00 here-in-before but for one socket outlet 3 pin, 5 Amps on independent board.

Description all as per srl item No. 91.00 here-in-before but for one socket outlet 3 pin, 5 Amps on same board.

Description all as per srl item No. 91.00 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

S&F in replacement of Modular switch 1 way 6A , 1 module size complete all as directed.

S&F in replacement of Modular switch 1 way 16A , 1 module size complete all as directed.

S&F in replacement of Modular Bell push 1 way 6A , 1 module size complete all as directed.

S&F in replacement of Modular Socket , 6 A , 5 Pin , 2 module size complete all as directed.

S&F in replacement of Modular Socket , 6 A / 16 A , 5 Pin , 2 module size complete all as directed.

S&F in replacement of Modular cover plate with frame 6 module.

S&F in replacement of Modular cover plate with frame 4 module.

S&F in replacement of Modular cover plate with frame 3 module.

S&F in replacement of Modular cover plate with frame 2 module.

S&F in replacement of Modular cover plate with frame 1 module.

S&F in replacement of Modular metal flash box 6 module.

S&F in replacement of Modular metal flash box 4 module.

S&F in replacement of Modular metal flash box 3 module.

S&F in replacement of Modular metal flash box 1/2 module.

S&F in replacement of electric call bell ding dong AC 230 volts Single Pole.

S&F in repalcement, of Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed.

M&L for sub main wiring with 2 run of 4 Sqmm FR, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 15 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : 1. The cost of concealed conduit & accessories is deemed to be included in quoted rates. 2. The two run of 4 Sqmm wire and one run of 4 Sqmm wire will be measured as one unit.

Description all as per srl item No. 111.00 here-in-before but with 2 run of 6.0 sq mm FR copper wire with 6.0 Sqmm FRLS copper cable as earth wire.

S&F in replacement of DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 12 way, 240 2volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

S&F in replacement of MCB, C Curve type, 10 kA, 40 to 63 Amp, SPN with over load and short circuit protection, complete all as directed.

Taking out old LT Panel any size/ type incl joint of cable, complete all as specified and directed by Engr-in-Charge.

Supply, install, connecting, testing and commissioning of cubicle compartmentalised outdoor type LT section pillar box size 0.9m x 0.9m x 0.7m, factory made, front and rear opening with locking arrangement, dust and vermin proof, CPRI approved, fabricated out of 3.15 mm thick CRCA sheet with canopy and base frame & mild steel angle iron stand, over all finished with epoxy powder coating, suitable for operation on 415 Volts, 50 Hz, AC supply, including earthing stud, labeling, etc. and section pillar box shall comprising the following complete including fixed in position with PCC foundation 1:4:8 Platform, connect with electric supply complete all as specified and directed by Engr -in-Charge.

(a) Bus bar chamber having 4 Aluminium strip Bus bar having air insulated and PVC sheathed 100 A Capacity fixed in position with required nuts bolts and porceline insulator etc.

(b) MCCB 4 Pole, 25 KA, 415 V, with adjusstable Thermal and fixed Magnetic (Manual Fixed type) of capacity 63 Amps. 01 No for incoming

(c) Outgoing MCCB 63 Amps -01 nos

(d) MCB TPN 32 Amps, 3 Nos

(e) MCB SPN 6-32A Amps, 03 Nos

(h) Phase indicator lamp LED Type

Note : 1. Unit rate quoted by the contractor here-in-before also includes for installation of panel on suitable PCC foundation and PCC plat form incl necessary earth and PCC work all as per manufacturer instructions and as directed by the Engr-in-Charge. 2. Panel drawings shall be got approved from GE before placing order.

Supply, install, connecting, testing and commissioning of cubicle compartmentalised outdoor type LT section pillar box size 0.9m x 0.9m x 0.7m, factory made, front and rear opening with locking arrangement, dust and vermin proof, CPRI approved, fabricated out of 3.15 mm thick CRCA sheet with canopy and base frame & mild steel angle iron stand, over all finished with epoxy powder coating, suitable for operation on 415 Volts, 50 Hz, AC supply, including earthing stud, labeling, etc. and section pillar box shall comprising the following complete including fixed in position with PCC foundation 1:4:8 Platform, connect with electric supply complete all as specified and directed by Engr -in-Charge.

(a) Bus bar chamber having 4 Aluminium strip Bus bar having air insulated and PVC sheathed 250 A Capacity fixed in position with required nuts bolts and porceline insulator etc.

(b) MCCB 4 Pole, 25 KA, 415 V, with adjusstable Thermal and fixed Magnetic (Manual Fixed type) of capacity 250 Amps. 01 No for incoming

(c) Outgoing MCCB 63 Amps -02 nos

(d) MCB TPN 32 Amps, 3 Nos

(e) MCB SPN 6-32A Amps, 03 Nos

(h) Phase indicator lamp LED Type

Note : 1. Unit rate quoted by the contractor here-in-before also includes for installation of panel on suitable PCC foundation and PCC plat form incl necessary earth and PCC work all as per manufacturer instructions and as directed by the Engr-in-Charge. 2. Panel drawings shall be got approved from GE before placing order.

Earthing complete with GI earthplate electrode 600mm x 600mm and not less than 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to GI strip of size 25x4mm by means of bolts, nuts, check nuts and washers of GI/steel all as shown in electric plate No 3 connected to equipments all as specified and indicated complete and including char coal dust & salt filling in alternate layers (each layer shall be 15 cm thick) and GI protection pipe, medium grade 40mm dia and GI watering pipe 20mm, medium grade with funnel and wire mesh, 40mm thick pre-cast RCC, M-15 (nominal mix) cover reinforced with XPM weight not less than 4kg/sqm with suitable handle of 6mm dia MS bar and angle iron 40 x 40 x 3mm frame for cover, PCC M-15 (nominal mix) pit, excavation and earth work in any type of soil and connected all as specified and as directed by Engr-In-Charge.

Taking out old LT under ground cable from trenches / floor / road / wall / pipe / pole of any size and description incl joint, complete all as specified and directed by Engr-in-Charge.

Supply, laying, testing and commissioning of LT UG cable XLPE insulated PVC sheathed galvanized steel strip armoured electric power cable with stranded aluminium conductor 1100 volts grade 70 sqmm 3.5 core.confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items.

Description all as per item Srl No. 120.00 here-in before but for cable size of 25 sqmm 4 core.

Description all as per item Srl No. 120.00 here-in before but for cable size of 16 sqmm 4 core.

Description all as per item Srl No. 120.00 here-in before but for cable size of 16 sqmm 2 core.

Description all as per item Srl No. 120.00 here-in before but for cable size of 10 sqmm 2 core.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m depth for laying of cable/ stay assy/HT/LT poles and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in excavated soil, including leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed by the Engr-in-Charge.

Removing excavated material (soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engr-in-Charge.

M&L for sand cushioning with layer of sand 8cm thick before laying of cable and 15cm after laying, streching & testing of cable in trenches complete all as specified and directed by Engr-in-Charge. Note :- Only punned thickness i.e 18cm shall be measured and paid.

Taking out old unserviceable/serviceable un-reinforced concrete PCC cable covers from excavated trench all as directed by the Engineer-in-Charge. Note:- Serviceable un-reinforced concrete PCC cable cover kept in safe custody for reuse at site and unserviceable un-reinforced concrete PCC cable cover through in low lying area.

Laying only old un-reinforced PCC cable cover of any size as retrieved from serial item No- 04 above, complete all as directed by Engineer-in-Charge.

Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as specified and directed by Engr-in-Charge.

Supply and erection in vertical position steel tubular swaged pole type 410 SP- 31 (9 mtr long ) with Mild Steel base plate of size 30cmx30cmx6 mm thick continuously welded to pole , finial taper plug ,bolts ,nuts and screws all as specified including factory painted with two coats of black bituminious paint internally throughout and externally for embedded position and two coats of aluminium paint over a coat of red oxide primer over the ground and making 30cm wide strip (total 15 Nos ) with black and yellow paint including numbering complete all as specified .

M&L stay assembly complete using stay rod of 16 mm dia complete with accessories as shown in electric plate No. 1 of SSR – 2009 Part –I complete all as specified and directed by Engr-in-Charge. Note : (Loop type insulator excavation , stay clamp, nuts, bolts, washers and concrete to be measured and paid separately).

Supply and fixing aluminum conductor steel reinforced (ACSR) of any size, straining properly on insulators and binding on new HT/LT poles with and incl 02mm dia aluminium binding wire all as specified & directed. Note : The 3% for sag, joints & jumpers shall be added in measurements. (a) 1 of 6/1x2.59mm (Weasel)

Galvanised steel earth wire of 4mm dia with hooks, , streching kinks and bends completed all as specified & directed.

S&F cross arms, bracing, supports clamps & back plates fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as directed.

S&F Pin type, porcelain, vitreous white, brown or green insulator incl one galvanized mild steel spildle, two galvanised iron washer and one galvanised iron nut, 100mm height, 65mm dia for 1100 volts grade completed all as specified & directed.

S&F Shackle Type, Porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts 100mm height, 115mm dia for 1100 volts grade completed all as specified & directed.

Excavation in trenches not exceeding 1.5 m wide and exc 1.5m deep but not exceeding 3.0 m depth for foundation of poles and getting out in hard/dense soil complete all as specified and directed by Engr-in-Charge.

Material and labour for Plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation for poles including use of necessary form works for rough finished surface complete all as specified and directed by Engr-in-Charge.

Material and labour for PCC 1:3:6 type C–2 (using 20 mm crushed graded stone aggregate/as in foundation for stay & copping and necessary form work for rough finished surface complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the galvanised iron strip 32×6mm by means of bolts, nuts , check nuts and washers of galvanized iron and galvanised iron strip protected by provision of GI light grade pipe 40 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 5 of SSR 2009 Part-I and connecting to MCBDB’s earth test point all as specified or indicated including testing on completion

Supply, install, connecting, testing and commissioning of cubicle compartmentalised outdoor type LT section pillar box size 0.9m x 0.9m x 0.7m, factory made, front and rear opening with locking arrangement, dust and vermin proof, CPRI approved, fabricated out of 3.15 mm thick CRCA sheet with canopy and base frame & mild steel angle iron stand, over all finished with epoxy powder coating, suitable for operation on 415 Volts, 50 Hz, AC supply, including earthing stud, labeling, etc. and section pillar box shall comprising the following complete including fixed in position with PCC foundation 1:4:8 Plateform, connect with electric supply complete all as specified and directed by Engr -in-Charge (LT PANEL No-2)

(a) Bus bar chamber having 4 Aluminium strip Bus bar having air insulated and PVC sheathed 250 A Capacity fixed in position with required nuts bolts and porceline insulator etc.

(b) MCCB 4 Pole, 25 KA, 415 V, with adjusstable Thermal and fixed Magnetic (Manual Fixed type) of capacity 125 Amps. 01 No for incoming

(c) MCCB 4 Pole, 25 KA, 415 V, with adjusstable Thermal and fixed Magnetic (Manual Fixed type) of capacity 63 Amps. Outgoing

(d) MCB TPN 32 Amps, 3 Nos Outgoing

(e) DP 6-32A Amps, 05 Nos Outgoing

(f) On Load Change over 125 Amp

(j) Phase indicator lamp LED Type

Note : 1. Unit rate quoted by the contractor here-in-before also includes for installation of panel on suitable PCC foundation and PCC plat form incl necessary earth and PCC work all as per manufacturer instructions and as directed by the Engr-in-Charge. 2. Panel drawings shall be got approved from GE before placing order.

SONAM ANGCHOK (BID ID -3151778)

M/S DAWA ENTERPRISES (BID ID -3151181)

M/S NANCY ENTERPRISES (BID ID -3152085)

M/s Aman Enterprises (BID ID -3153873)

M/S GEE GEE ENTERPRISES (BID ID -3150988)

M/s Koul & Sons (BID ID -3151464)