SPECIAL REPAIRS TO BUILDING NO. P - 202 (L BLOCK ) AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Amount

Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L 25mm thick Plain Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) laid in flooring complete as specified and directed

M&L for non skid colour ceramic tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm of approved 1st quality in floors etc set and jointed in neat cement slurry and pointed with white / coloured cement to match laid over and including 15 mm thick screed bed/bedding layer in CM (1:6) coloured tiles complete all as specified and as directed.

Material and labour for digital coloured glazed ceramic tiles of sizes 300m x 450 mm X 7 mm thick jointed in neat cement slurry, in vertical surfaces laid over including 10 mm thick rendering coat/backing layer in CM (1:3) and pointed in white or coloured cement to match the shade of tile as in vertical surfaces such as dado/skirting complete all as specified and as directed. Note :- Mitred tiling to be done at external corners with a cut at a 45 degree angle along the edge of the tile and the cost is included in the rate quoted above

M&L Complete removal of existing treatment on walls complete all as specified and as directed.

M&L for two coats of Oil bound distempering over a coat of primer over 3mm thick wall putty with white or tinted on walls complete all as specified and as directed.

M&L preparing old decorated surfaces, including cornices and applying one coat of white wash on ceiling. all as specified and directed.

M&L preparation of previously treated wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint. all as specified & directed

M&Lfor Finishing brick/stone walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) using of all scaffolding, trestles,ladders,cradles which are necessary for execution of work and protective measures including removing of nails,making good holes,cracks,washing floors, cleaning glass,joinery, electric fitting,wiring etc of drops and splashes and leaving premise,clean and tidy complete all as specified and directed.

Supply and fix in repairs 25 mm dia mild steel, chromium plated curtain rods with fixing brackets, stops, rollers etc.and taking down old pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F Plywood, grade BWP, type BB of 12mm thick with 7 Nos of plys, fixed with screws to timber frame including 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap 40 mm complete all as specified and as directed.

S&F brass magnet for cupboard with locking system complete all as specified and as directed.

S&F 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and as directed.

S & F Hat and coat hooks, solid body, 175mm to 250 mm fixed complete all as specified and directed

Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed.

Taking down Chowkhats or frames with shutters n exc 1.5 sq. m each complete all as specified and as directed

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

Supply and fix factory made Flush shutters single leaf/ double leaf,30mm thck solid core construction, with block board core and both sides face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

Supply and fix 30mm 2nd class hardwood thick factory made skeleton shutters, open rebated and preparedto receive gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and as directed.

S&F 125 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed, for flush pressed steel door frame complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 200 mm size Aluminium tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge

S & F 300mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fix mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and directed

S & F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed

S & Fsolid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and directed

S & F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2,4,or 6 raised panel design with 2mm thick Moulded Prelaminated PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed

S & F Powder coated aluminium window shutters including frame of weight not less than 1.5 Kg/RM, sliding type two track for fixing glass including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium snap beading, screws, anodised aluminium fittings such as handles and locking arrangement complete all as specified and as directed. Note : (i) Item include frame and shutter. (ii) Glass and mesh will be measured and paid separately under relevant item.

Supply and fix 4mm thick tinted sheet glass glazing any size with rubber packing where ever required complete all as specified.

Supply and fix Anodised aluminium grill any size 8 mm thick complete with frame or channel section including all necessary fittings complete all as specified.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge.

S&F Anodised aluminium frame for doors, Louvered and partitions with one or more rebates including cleat for fixing etc including powder coating of any colour (min thickness of powder coating 50 micron) complete all as specified and directed.

S&F 5.5 mm thick tinted glass of superior quality fixed to aluminium partition and door each pan complete all as specified and directed.

M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, includin fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

Demolition of Roofs, Tanks, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work if cement concrete is reinforced (reinforcement cut as required to facilitate demolition)

S & F 2000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position all as specified and directed.

S&F 25 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(Minimum weight 15mm-142gms/ 20mm-210gms/25mm-455gms/40mm-690 gms) all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore pipe all as specified and directed.

M & L for 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rounding edges,grinding and polishing complete all as specified and as directed.

S&F Counter Sunk wash hand basin oval shaped 550x430x195mm complete all as specified and directed. Make: Parryware or equivalent

S&F in 15 mm bore pillar taps with sawn neck ,chromium plated,screwed down, fancy type high pressure complete all as specified and as directed.

S & F 32mm dia bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified & directed

Supply and fix vitreous china squatting pan (orissa pattern), size 580x440 mm white with integral foot rests including removing the existing one complete and making good all connections as in repairs all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, flushing cistern , seat cover and flush pipe all as specified and directed.

S & F 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete as in repairs all as specified and directed.

S&F for Vitreous China urinals, half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe all as directed and specified.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

Taking down or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed.

Taking down or down steel tubing and connections 20 mm bore, including cleaning for refixing or removal to store all as specified and directed.

Supply and fix steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed.

Supply and fix steel water tubing 20 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth

S&F in repair angle valves 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed.

Supply and fix 15 mm bore PVC connection pipe 45cm long with brass nuts and washers on both ends all as in repairs specified and directed.

S&F in repair 15 mm bore CP fancy type long body Bib tap crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F brass CP Shower rose with arms 125 mm size fixed to pipe all as specified and directed.

S&F Brass Chromium plated Tubular towel rail, 20mmdia, D type, 60cm long between flanges all as specified and directed.

Supply and fix 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed complete all as specified and directed.

S&F 32mm Dia PVC waste pipe for sinks or wash basins complete all as directed and specified.

S&F in repair Two way taps 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch screwed both ends for iron pipe or for unions all as specified and directed.

M&L in repair 15 mm bore fancy type health faucet with SS hose complete all as specified.

S & F corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

Supply and fix Grating doom 125 mm dia with / without waste hole of PTMT (Minimum weight 40gms) and fixed in repairs all as specified and as directed.

Demolition/Dismantling of drain pipes any type at any position complete all as specified and directed.

S&F PVC (SWR)110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) branch piece of 110mm bore, single (single Y) equal or unequal complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) floor trap of 75mm, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends of 75mm bore complete all as specified and as directed.

Removing excavated material distance exc. 1.5 km but n.exc 5km and depositing where directed

M&L for MS Framed brackets of angles or tees For Grill door, Wicket gate, Ladder with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, MS Round bars conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water and removing the debris out of MOD land etc complete all as directed.

M & L Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces on walls finished even and smooth without using extra cement. etc complete all as specified and as directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil.

Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed.

M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete etc complete all as specified and as directed

M & L PCC 1:2:4 type B0 (12.5 mm graded stone aggregate) as in coping including necessary formwork etc complete all as specified and as directed

M & L PCC 1:2:4 type B1 (20 mm graded stone aggregate) as in benching including necessary formwork for man holes etc complete all as specified and as directed

M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed

M & L Mild steel work as in handles of man hole cover slabs, rungs of man holes, straps and similar articles confirming to FE-290 Gde E-165 etc complete all as specified and as directed

M & L Rendering 15mm thick in CM 1:4 mixed with WPC on fair faces of brick work or concrete surfaces on walls finished even and smooth without using extra cement.. etc complete all as specified and as directed. NOTE: WPC will be measured and paid separately

Supply only liquid water proofing compound.

M & L precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs (for man holes etc.) set in CM 1:6. including all necessary form work etc complete all as specified and as directed

M&L Plain Cement concrete type C-2, 1:3:6(40mm graded aggregate) 75mm thick laid in plinth protection including Grade B joint filling as specified and directed

Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC casing and capping / PVC Conduit pipe of adequate size fixed on surface with PVC rawl plugs with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with modular white colour cover plate with frame or with 3 mm thick laminated sheet fixed with suitable brass screws and cup washers

One light/buzzer point controlled by one; one way switch.

One light / fan point controlled by two, two way switch

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp point on the (same board) with other switches.

One 3 pin socket outlet 5 amp point on the independent board

All as per item here-in-before but with 4 sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

Supply and fix modular switch 6 Amp, two way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular fan regulator 120 W 2 module complete all as specified and directed by Accepting officer

S & F in repairs earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, 20A, 240 Volts as per all as specified and directed.

Supply and fix wall mounted LED Batten fittings extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED (4 feet) complete with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by ENgr-in-charge.

S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed.

S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable for LED/CFL lamp fitting and including LED Bulb 15 Watt complete all as specified and directed by Engr-in-charge

Taking down distribution boards / main switches of any type, size and capacity complete all as specified and directed by Engr-in-charge

Taking down MCBs, metal clad plug of any type, size and capacity complete all as specified and directed by Engr-in-charge

S & F sheet metal enclosure powder painted for MCB DB SPN 08 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed by accepting officer

S & F sheet metal enclosure powder painted for MCB DB TPN 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed by accepting officer

Supply and fixing MCB TPN, 63 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces all as specified and as directed.

M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 6 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc., and connecting up ,all as directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable no of nuts, bolts and clamps complete all as specified and directed by Engr-in-charge

Taking Down Old Unserviceable XLPE UG complete including all accessories complete all as specified and as directed by Engr-in-charge.

Supply and fix in replacement XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of cross sectional area 50 sqmm 3.5 core complete all as specified and directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundations/ taking out/ in cables/ pipes etc. or for shafts, well cess pits, manholes, pier holes, etc but not exceeding 10 Sqm on plan and getting out in any t

Returning, filling in, including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick in soil complete all as specified and directed.

Removing surplus soil obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting paint complete all as specified and directed.

Supply and fill dry river sand in treanches for cable cushioning over and below the cable complete all as specified ad directed. (The punned thickness shall only bev measured)

Supply and fix precast concrete cable covers class LV type 1, flat size 250 x 150 x 40 mm M-20 grade concrete laid dry for cable protection complete all as specified and directed.

Supply and fixing of wall fitted bed side lamp LED 10 Watt Sleek & Modern design 220 V decorative type with all accessories complete all as specified and directed by Engr-in-charge.

Supply and fix electric water heater, storage type ABS body with SS inner tank made of ultra thixk super cold rolled steel plates and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece(hot and cold water connection pipe) etc complete all as specified and directed by Engr-in-charge. Make : Havells Monza DX or equivalent of Bajaj or Recold

Supply and fix Exhaust fan, steel body, steel body AC Single phase 230 V of size 300 mm sweep with blades, and frame and louvers complete all as specified and directed by Engr-in-charge

Supply and fix of any length GI pipe of dia 15 mm dia including connection sockets, elbow and tee for connecting pipes etc and connecting pipe to inlet and outlet of the geyser complete all as specified and directed by Engr-in-charge

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor, BEE 5 Star rating complete all as specified and directed by Engr-in-charge.

M&L for cutting round holes suitable for fixing of exhaust fan of size 300 mm into through stone walls built in cement mortar or cement lime mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required and plastering in CM 1:4 external / internal surfaces and finished to match with the existing surfaces complete all as specified and directed by Engr-in-charge.

saradhi construction combines

K LAKSHMAN SINGH AND CO

M/S DIVIJA BUILDERS

SAI RAM CONSTRUCTIONS

M/S P.SWAROOP KUMAR

KOGANTI CONSTRUCTION COMPANY

Sri Associates