Providing Fitting Replacement of Existing machinery with allied works at Tube Well Abdullian A

Amount

Providing, Lowering, Installation, Testing & Commissioning of Submersible Pump set at tube well mentioned above having capacity of (15,000 GPH) X (40 Head) coupled with 3 phase 380 volts+10%, 50 HZ+3% AC supply, copper wound squirrel cage induction submersible motor ranging from 20 HP along with 10 No-150mm flanged column pipes assembly and other allied materials/equipments required during lowering of submersible pump set. The job also includes P/L 0f 30 mtr 35 mm sq. 3.5 core aluminum cable armored cable for connection of control panel to electric transformer and 180m-16 mm sq 3 core submersible cable for connection of panel to the submersible pump set. The job also includes P/F of 3mtr 150 mm dia. Flanged G.I delivery pipe with sluice and non return valve. The job includes cost of material, labour, carriage, tools and tackles ( complete job in all respects) Electro-mechanical accessories used should of genuine/reputed make conforming to latest IS code

Replacement of old wornout / damaged panel board. The job includes design, fabrication, installation, testing and commissioning of 50 Amp fully automatic unmanned type control panel cum auto starter for different motors (ranging between 17.5 H.P to 25 H.P submersible/ V.T. Motors) at different Tube Wells. This involves fabrication of star delta air break auto starter with power contactors MNX-50 3 Nos. of reputed make. The system should be provided with MCCB 1 No. of 100 amps rating of reputed make. The complete system should be enclosed in all mounted M.S. sheet enclosures/box of suitable dimension. The enclosure should be finished with power coated painting from inside as well as from outer surface of approved colour. The job also involves laying/ providing and fitting of PVC copper cable of suitable rating and length from voltage Stabilizer/ main switch/motor to the automation-cum protection panel. All the electrical connection should be made after proper thimbing and end socketing of each cable end with cooper thimbles of appropriate rating. Automation the system shall trip off the motor on power failure and on appearance of an electrical fault mentioned below which may otherwise damage the motor field coils and restart the motor automatically on resumption of electric. Power and also on rectification of the appeared electric fault thus providing automation to the system and protection to the motor. The system shall provide protection against low voltage below 350 V, high voltage above 450 V, single phasing, reverse phasing, un balanced phasing, dry running and over loading in addition the system shall have separated LED fault indicator, LED phase indicators, an isolation by pass system and an audio warning system/ siren which activates on starter failure on making electric connections and testing on full load

Providing, installation, commissioning & testing of 63 KVA copper wound, oil cooled, manually operated stabilizer with input voltage range (160 V to 400V) and output voltage range (400 V + 10%) and frequency 50Hz + 3% for irrigation Tube-Well. Stabilizer assembly should comprise of core made of silicon steel wound with copper coil conductor of appropriate quality confirming to BIS with di-electric oil of proper value for cooling stabilizer assembly. The job also includes providing and laying of 35mm2 3 ½ core aluminum cable of required length as per site for making of connections of stabilizer to control panel and P/F 100 Amp. Changeover switches for by-passing the voltage stabilizer. The job also includes P/F of 01 no. 100 Amp MCCB on output side & other required fitting. The job includes earthing of all electric equipment installed at site including voltage stabilizer. The job includes cost of material, labour, carriage, tools and tackles (Complete Job).

PERFECT ELECTRICAL WORKS

M/S K S ENGG WORKS

JAGDEMBAY MECH ENGG WORKS