Design, Construction , Erec...

Amount

Add for electrical fitting and all other works contingent thereto.

NS Item -MPS (MAIN PUMPING STATION).. a) Design, construction, erection, testing and commissioning of MPS and following components: b) RCC Inlet chamber, screening chamber, collecting tank, wet well sump suitable for 2.50 MLD average flow with peak factor 3 including providing and installing 5 No. non clog sewage submersible pump set i.e. 1 No. of 5300 LPM, 2 No. 1800 LPM and 2 No of 900 LPM having minimum head of 15 m. equipped with suitable LT panel board, all safety devices automatic capacitor bank and suitable size submersible cable complete in all respect as per approved NIT. c) K9 DI pipes of suitable dia at MPS including welding and screwing of flanges, ISI marked DI fittings, sluice valves, non returning valves as per requirements even for bye-pass arrangements complete in all respects as per approved NIT. d) 3 No. CI Gear operated sluice gate with SS spindle (SS 410) and seats (SS304) (2Nos. for screen and 1 No. for partition of collecting tank) as per design complete in all respect as per approved NIT. e) Supply and installation of 2 Nos. mechanical coarse screens suitable for 2.50 MLD average flow with peak factor of 3.0 complete in all respects as per approved NIT. f) All the infrastructure except construction of staff quarter, boundary wall and work covered under schedule-1A (HSR-items) and path ways/roads required to be executed at site to make the MPS functional is included in the scope of work for lump- sump job complete in all respects as per approved NIT. g) All the pumping machinery, panel board, Level sensor etc. shall be controlled by PLC and SCADA and shall be synchronized with PLC panels at MPS and STP site through broadband internet facility. h) The size and quantities of all the above components will be as per approved structural/Hydraulic/ Mechanical/ Electrical design to be approved by department before actual execution of work complete in all respects as per approved NIT including operation and Maintenance of 5 years after 12 months defect liability period and 3 months trail run period....

ANNEXURE BUILDING:- Construction of HT/LT Panel room, PLC room, Centrifuge house, blower room and Lab cum office building including doors, window and fitting with toilet block including sanitary fittings etc. as per drawing approved by SE at MPS and STP, 250 Sqm covered are built up with RCC framed structure and brick work finished with vitrified glaze tiles flooring, powder coated aluminum frame made with 10 gauge sheet heaving size 100 mm x 45 mm for chowkhat frame, 75mm x 45mm for door frame and 45mm x 45mm for window frame with 5mm thick glass AIS/Saint Gobain/Modi Float complete in all respects as per approved DNIT including operation and Maintenance of 5 years after 12 months defect liability period and 3 months trail run period. 250.00 Sqm.....

SEWAGE TREATMENT PLANT A) SEWAGE TREATMENT PLANT a) Design, construction, erection, testing and commissioning of 2.50 MLD capacity Sewage Treatment Plant based on Sequential Batch Reactor (SBR) Technology complete in all respect including landscaping, MCC Panel room, all other contingent i.e. Electrical, Mechanical, piping and Instrumentation work with PLC and SCADA arrangement for STP integrated with MPS including furniture and laboratory equipments as per detail given in the bid document and following components complete in all respects as per approved NIT. b) Supply and installation of 2 Nos. fine screens of suitable size for 2.50 MLD average flow with peak factor of 3.0 complete in all respects as per approved NIT. c) 2 Nos. High Mast of 9 mtr. GI octagonal pole of 4 mm thickness (T=100mm, B=200mm, Base plate= 320x320x20mm), window at 500 mm from base plate with 6 No LED suitable size, outdoor type energy, efficiency lamps on each pole, 20 No. LED outdoor light with 7m. high GI pole along Road/path including all accessories complete in all respects as per approved NIT. d) Supply and installation of 1 No. 3.65 m wide main gate of MS and 1.25 m wide wicket gate at STP to the entire satisfaction of Engineer-in-charge (Total weight not less than 500kg) complete in all respects as per approved NIT. e) Providing and installing 2 Nos. centrifuges (1Working plus 1 Stand bye) including centrifuge feed pump all fittings, instrumentations, electric panel board etc. as per design including packing dry sludge in 20 Kg. bag and supplying the same in market Kisan Sewa Kendra or as directed by Engineer- in charge within the lead as pointed at clause 4.4.4 of the DNIT, complete in all respects as per approved NIT including operation and Maintenance of 5 Years after 12 months defect liability period and 3 months trail run period. B) ONLINE OUTLET EFFLUENT WATER QUALITY MONITORING SYSTEM b) Supply, installation, testing and commissioning, operation and comprehensive annual maintenance of effluent quality monitoring system at 2.50 MLD STP at Naguran for online (Continuous) measurement of PH, Total Suspended Solids (TSS), Chemical Oxygen Demand (COD), Biological Oxygen Demand (BOD) by single analyzer with various sensors (spectral measurement in the UV-VIS range 200-720mm) performing reagent and chemical free analysis with automatic cleaning of censor, signal cables and power cables, local data acquisition and display of data on continuous basis for up linking the data to CPCB, HSPCB and PHED. TUV approved complete in all respect as per Central Pollution Control Board (CPCB) guidelines for online continuous monitoring system for effluent and as contained in scope of work in the DNIT complete in all respects as per approved NIT. a) Multi-parameter measuring converter, for connecting upto 18 intelligent sensors Scope including 8 analog inputs/ Outputs (4 inputs and 4 outputs) (o/4-20 Ma), wide range power supply optical COD/BOD and TSS probe with spectral processing of the UV-VIS range for measurement in the outlet/ effluent of plant of 2.50 MLD capacity STP at village Naguran with integrated with automatic cleaning complete in all respects as per approved NIT. b) Robust digital pH/ ORP sensor for pH/ORP electrodes, with built-in pre-amplifier and temperature sensor with Automatic Temperature compensation (ATC) cable length 100 Meter (minimum) complete in all respects as per approved NIT. c) Sensor adapter cable for all intelligent sensors, with IP68 water proof connection to intelligent sensors net system cable length 100 Meter (minimum) complete in all respects as per approved NIT. d) Data Transfer to CPCB, HSPCB and PHED Servers during OandM period 6 year (including defect liability period of 1 year) after completion of trial run of 3 months complete in all respects as per approved NIT. e) Providing GSM, 3G, 4G, 5G Modem with mobile network connectivity including network complete in all respects as per approved NIT including operation and Maintenance of 5 Years after 12 months defect liability period and 3 months trail run period. Both STP and ONLINE OUTLET EFFLUENT 1 Job.....

CCTV CAMERAS:- Providing and Installing 10 CCTV Cameras (4 Cameras for STP, 2 Cameras for MPS and 2 Cameras both IPS) complete as per satisfaction of the Engineer– in- Charge, within 96 hours of signing the Agreement along with 90 days recording (DVR), 32 inch LED Screen, 16 Channel DVR at STP Site and 8 Channel DVR at MPS Site with connectors, cables, poles and power supply with online real-time output facility. The cameras at both the sites i.e. MPS and STP shall be synchronized at STP site complete in all respects as per approved NIT. i) At STP and MPS Site- 1 No. PTZ speed dome 360 degree 50 x zoom camera, 3 No. 12 mm lens size, 1 Nos. 3.6mm lens size. Make: - CP Plus Internet Protocol minimum 5 MP WDR, Night vision color mode 2.4.2 12 mm very focal with extra IR, CCTV Cameras should be installed and commissioned before starting of the work complete in all respect as per approved NIT including operation and Maintenance of 5 Years after 12 months defect liability period and 3 months trail run period. 1 Job.....

NS Items Provision of Independnet Feeder for Sewerage Treatment Plant, from Sub Station Village Naguran to Proposed STP Naguran. 2.50 km......

Bidder Name

Amount

M/S AAR PEE CONSTRUCTION COMPANY JIND (GSTN-06ACEFA1525A1Z8) BID ID -1093305

Jai Shree Balaji Constn Co. (GSTN-06AKLPK7500N1ZV) BID ID -1094728

M/s Sourabh Construction Pvt. Ltd.(GSTN-NA)--1092527

RAJEEV KUMAR GOEL CONTRACTORS(GSTN-NA)--1094486

M/S SHREE BALAJI BUILDERS(GSTN-NA)--1094756

Sh.Jasveer Singh Dahiya(GSTN-NA)--1094051

kapil engineering company(GSTN-NA)--1092855

ROHTASH KUMAR CONTRACTOR(GSTN-NA)--1094293

M/s Sourabh Construction Pvt. Ltd.

ROHTASH KUMAR CONTRACTOR

M/S SHREE BALAJI BUILDERS

Jai Shree Balaji Constn Co.

M/S AAR PEE CONSTRUCTION COMPANY JIND

Sh.Jasveer Singh Dahiya

kapil engineering company

M/S SHREE BALAJI BUILDERS

M/s Sourabh Construction Pvt. Ltd.

RAJEEV KUMAR GOEL CONTRACTORS

Sh.Jasveer Singh Dahiya

ROHTASH KUMAR CONTRACTOR

kapil engineering company

Jai Shree Balaji Constn Co.