SPL REPAIR TO ROAD CUM PATH AT MUNDOTA FROM MAIN GATE TO MAGAZINE INCL ADM BLOCK UNDER GE(S) JAIPUR

Amount

Repair to pot holes any depth area not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, path etc cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming including supply of road metal, complete all as specified and directed.

M&L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm exc 50mm deep but n exc 100 mm deep including removing n.exc 50 metres and stacking complete all as specified and directed.

M&L for upto 150 mm thick (compacted thickness) Wet mix macadam (WMM) in two layers of 75 mm thick each with granite trap or basalt stone coarse aggregate of grading 2 (63 to 40mm size ) or of grading 3 (50 mm to 20mm) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site for all leads & lifts, to be laid using mechanical paver, spread watered,rolled & consolidated to required gradient and camber with vibratory type power roller 8-10 tonne capacity to achieve the desired density complete all as specified and directed.

M&L for prepaing existing unsurface water bond macadam by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with machenical blower and gunny bags to remove all loose dirt etc and applying evenly tack coat with bituminious primer using paving bitumen (VG-30) grade @ 10 kg/10 Sqm on road surface by mechanical sprayer complete all as specified and directed.

M&L for laying premix bituminous macadam (consolidated thickness 75mm or less) using 20 mm size crushed stone aggregate mixed with paving bitumen any penetration of grade (VG-30) @ 4% by weight of total mix, rolled and compacted with 8 to 12 tonne power road roller to required gradient and camber complete all as specified and directed. Notes :- The content of Bitumen specified in this item is maximum content, in case, the quantity of Bitumen required is less as per approved design mix, the minus price adjustment for less quantity of bitumen shall be made @Rs.50.00/Kg

M&L for prepaing existing black top surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with machenical blower and gunny bags to remove all loose dirt etc and applying evenly tack coat with bituminious primer using paving bitumen (VG-30) grade @ 5 kg/10 Sqm on road surface by mechanical sprayer complete all as specified and directed.

Laying of Bituminous premixed Semi Dense Asphaltic Concrete 30 mm thick consolidated thickness with binder content of paving bitumen (VG-30) @ 5.5 % by weight of total mix including supply of filler (OPC cement) as per design mix, spread using Mechanical sensor paver rolled and compacted with 8 to 12 ton power road roller to a required camber and gradient complete all as specified and directed. The content of Bitumen specified in this item is maximum content,in case, the quantity of Bitumen required is less as per approved design mix, the minus price adjustment for less quantity of bitumen shall be made @Rs.50.00/Kg Note : (i) Premix concrete shall be mixed in hot mix plant, transported from plant to work site and laid/spread by means of mechanical paver. (ii) Filler for semi dense asphaltic concrete shall be stone dust @ 2% of total mix (iii) Material shall be brought at site from approved / authorised Hot Mix plant at any distance. Hot mix plant shall be got approved from GE.

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre line, stop line, dashes, arrows etc and the like n. exc 10 cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour conforming to BS 3262 - 1989 with special applicator machine all as per manufacturer instruction complete all as specified and directed.

S&F in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) as in kerb stones , PCC below or sides of road surfaces and interlocking/chequered tiles complete all as specified and directed.

S&F at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed. Length of finished kerb edging shall be measured for payment. Precast C.C. kerb stone shall be approved by Engineer-in-charge.

M&L for applying two coat of synthetic enamel paint over concrete/plastered surfaces along with prepration of new surfaces of any description over 10cm width or girth with priming paints plaster coat complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint over old concrete/plastered surfaces along with prepration of old surfaces of any description over 10cm width or girth with priming paints plaster coat complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for providing 75mm thick cement concrete Type D-2, 1:4:8 (using 40mm graded aggregate) as in floor sub base complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using platevibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Labour only for dismantling old existing paver block and refixing in same location coloured Machine pressed precast concrete interlocking paver block as obtain from taking down any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including Material and labour for 25mm thick fine sand cushion complete all as specified and directed.

M&L for providing cement concrete Type B-1, 1:2:4 (using 20mm graded aggregate) cement concrete in roof kerbs or mud stops, coping rounded or chamfered on edges/sides of interlocking tiles etc complete all as specified and directed.

Schedule of Credit

JAGDAMBA CONSTRUCTION COMPANY (BID ID -3345070)

Aman Corporation (BID ID -3358939)