REPAIR/ MAINTENANCE TO CHAIN LINK FENCING, HARDSTANDING, PATH, DRAIN, CULVERT, COMPOUND WALL, GATE, JAFRI WALL AND CERTAIN B/R MISCELLANEOUS WORKS OF RESTRICTED AREA OF COD UNDER AGE B/R-II OF GE (EAST) JABALPUR

Amount

Demolition of brick work or stone/boulder masonry, built in CM or cement lime mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.

M&L Brickwork with old size flyash bricks, straight or curved on plan exceeding 6m mean radius, built in 1:6 CM complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 and to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L preparation of newly plastered or unplastered brick work or concrete surfaces & applying three coats of white wash on prepared brick work or concrete surfaces complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for complete all as specified and directed.

M&L Cement Concrete Type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Laying only Machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658 - 2006 of 80 mm thickness M-40 Grade with grey cement & no pigment complete all as specified and directed.

Laying only Machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658 - 2006 of 60 mm thickness M-35 Grade with grey cement & no pigment complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658 - 2006 of 80 mm thickness M-40 Grade with grey cement & no pigment complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658 - 2006 of 60 mm thickness M-35 Grade with grey cement & no pigment complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering & consolidation complete all as specified and directed.

M&L Hardcore of broken stone or boulders of gauge not exc. 63 mm, deposited, spread & levelled in layers not exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

Dismantling Stone slabs & tiles of any description or thickness in floors, aprons etc., laid bedded & pointed in any mortar complete all as specified and directed.

M&L coloured rubber moulded chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment over & including 20 mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes complete all as specified and directed.

M&L Heavy Duty Vitrified Ceramic tiles 10 mm thick (Square/Rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match over & including 15 mm thick screed bed or bedding layer of CM 1:6 for laying floor finishes complete all as specified and directed.

M&L Cement Concrete Type B-1, 1:2:4 using 20 mm graded stone aggregate as in path/ hard standing surface finished even and fair complete all as specified and directed.

M&L forming construction joint 90 mm deep x 10 mm wide filled with grade 'A' sealing compound complete all as specified and directed.

Excavation in trenches in soft/loose soil, n.exc 1.5 metre wide & n.exc 1.5 metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan & getting out complete all as specified and directed.

M&L Moorum/ Red Bajri filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled & rammed including watering complete all as specified and directed.

M&L Cement Concrete Type B-1, 1:2:4 using 20 mm graded stone aggregate as in surface channels & drains complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

Add or Deduct for each 25 mm girth or part thereof over or under 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L providing Cement Concrete Type B-1, 1:2:4 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps; seismic & other similar bands, plinth courses, string courses, lacing courses, parapets & railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs & the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Demolition of Cement Concrete (reinforced) of any description & in any position not otherwise specifically provided for complete all as specified and directed.

M&L Providing Precast Cement Concrete Type B-1, 1:2:4 using 20mm graded stone aggregate as in landings, cover slabs (for manholes etc.), chullah hoods, chajjas, water troughs, mangers, shelves & similar articles with plain faces including necessary chamfers, weatherings, throating etc. & setting in CM 1:6 including necessary formwork if required complete all as specified and directed.

S&F of Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L Returning, filling in soft/loose soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M&L Removing surplus excavated material (soil) to a distance n.exc 50 metre & depositing where directed at a level n.exc 1.5 metre above the starting point complete all as specified and directed.

Dismantling posts or sturts (wood, steel or R.C.C.) any section embedded in concrete, brickwork, masonry, etc., including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.50 cum in soft/loose soil, getting out, returning, filling in & ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering & removing surplus soil to a distance n.exc 50 m & making good surface complete all as specified and directed.

M&L Cement Concrete Type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified & directed.

S&F of Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, driiling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F of mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) quality-A or Fe-290 (Gde-E-165) complete all as specified and directed.

S&F of Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but not exc 10 cm long, diameter of neck 11 to 15 mm complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire complete all as specified and directed.

Supply only Chain link MS galvanised fencing any size or type complete all as specified and directed. Note : Weight of chain link fence shall be accessed by BOO convened by GE.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc., complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete quality conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L preparation of new or previously untreated surfaces of steel of any description, not exc 10 cm in width or girth when unconnected with other painting or when painted in a different tint & apply two coat of synthetic enamel paint (ordinary tint) over & including one coat of red oxide, zinc chrome primer complete all as specified and directed.

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described & applying two coat of synthetic enamel paint (ordinary tint) over & including one coat of red oxide, zinc chrome primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F in repair, Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., as directed (each line wire to be measured) complete all as specified and directed.

Use and waste of Form Work to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits (if any) of foundation & plinth beams & similar work; vertical or to batter, rough finished flat surfaces of concrete complete all as specified and directed.

Use and waste of Form Work to faces of walls, retaining walls, abutments, parapets, & staircase railings & similar work including attached pillasters, buttresses, etc., vertical or to batter, fair finished flat surfaces of concrete complete all as specified and directed.

M&L Reinforced Cement Concrete M-25 (Design Mix) (20 mm graded aggregates) in walls, retaining walls, basement walls, ballast walls & the like; any thickness; above top of footings; including attached pillasters & buttresses complete all as specified and directed.

M&L Reinforced Cement Concrete M-25 (Design Mix) (20 mm graded stone aggregates) in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc.; basement slabs, under-reamed piles & mass concrete complete all as specified and directed.

M&L RCC M-25 design mix using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Use and waste of Form work to side of columns and similar work with fair finished surface complete all as specified and directed.

Use and waste of Formwork to side and soffit of beam with fair finished surface complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

Schedule of credit amount of Rs 138705.00 to be deducted during AOC.

deepak kumar vishwakarma (BID ID -3405356)

LAL SINGH & SONS (BID ID -3412995)

SR ASSOCIATES (BID ID -3412655)

M/S N K SONKAR (BID ID -3413115)

santosh yadav (BID ID -3413063)