Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAccepted-AOC 259 4TH CROSS HAL III STAGE BANGALORE 560075 | BANGALORE | BENGALURU URBAN | KARNATAKA | 560075 | L1 | Accepted-AOC L1 | |
| 2 | L2₹40.0 L+₹2.1 L (5.58%)Rejected-Finance | L2 | Rejected-Finance Rejected being L2 | |
| 3 | L3₹40.3 L+₹2.4 L (6.36%)Rejected-Finance | L3 | Rejected-Finance Rejected being L3 | |
| 4 | L4₹41.8 L+₹4.0 L (10.5%)Rejected-Finance | L4 | Rejected-Finance Rejected being L4 | |
| 5 | L5₹46.4 L+₹8.5 L (22.6%)Rejected-Finance | L5 | Rejected-Finance Rejected being L5 |
Tender Value
₹45.1 L
EMD Value
₹90,200
Closing Date
14 Aug 2023, 6:00 pmClosed
GE I RD East Bangalore
GE I RD East Bangalore 93
REPAIR TO ROOF TREATMENT CHAJJAS PARAPET WALL GALVALUME SHEET COLLAPSIBLE GATE PLASTERING AT ADE DEBEL LAB UNDER GE I RD EAST BANGALORE
2023_MES_610255_1
8406
Open Tender
Civil Works
Item Rate
270 days
GE I RD East Bangalore
D a (i)
8 documents required · 8 mandatory
₹500
Yes
GE I R AND D East Bangalore
₹90,200
Yes
20 Nov 2023
22 Jul 2023
21 Aug 2023
23 Jul 2023
14 Aug 2023
7 Aug 2023
24 Jul 2023 - 31 Jul 2023
Amount
Demolition of cement Concrete of any description and in any position not otherwise specifically provided for removal of debris complete.
Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight)
Cutting V grooves 15mm X 15mm in existing roof or terrace and cleaning out and filling /making good with epoxy based compound NITOMARTAR PE of FOSROC chemicals as per directions of manufacturer complete all as specified and as directed
M&L for PCC 1:2:4, type B0 (Using 12.5mm graded stone aggregate) as in roof in roof kerbs or mud stops, rounded or chamfered on edges & levelling etc complete all as specified and as directed
M&L for rendering 10mm thick cement screed over roof concrete surface in CM 1:3 and finishing the surface even and smooth without using extra cement with water proofing compound complete all as specified and directed. (WPC shall be measured and paid seperately).
Supply only integral water proofing compound complete all as specified and directed
M&L applying PUROOFKOAT, single component, cold applied, water based Polyurethane modified acrylic dispersion with highly elastic and UV resistance water proofing treatment to the roof @ 1.2Kg/m2 to confirm to ASTMD 6083-97 a with a density of 1.25 to 1.3Kg /ltr, having tensile strength of 1.5N/mm2, having elongation of 350% with solid content not less than 60% in 3 coats including self-priming of same material after dilution of water at 50% and spreading 60 gms Geo-textile between two top coats completely as per specification and direction of EIC.
M & L for applying bituminous primer on roof surfaces @ 0.40 ltr/sqm after cleaning the roof or on new concrete surface tha applying one coat of hot blown bitumen of grade 85/25 @ 1.20 kg/sqm as binding material and provide modified polymeric five layered APP (Atactic Polypropylene modified Polymeric) membrane with 100 micron high molecular high density polythylene film. Min wt of memebrane will be 3.5 kg/sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) all as specified and directed by Engr-in-Charge. Make - M/s Sika India Pvt Ltd( Sika WP Shield 103/104, M/s Fosroc Chemicals ( Proofex Tochseal 3 PI), M/s STP Ltd ( Super Thermolay APP PL/MT), M/S IWL India Ltd ( Hyperplas Brand Fibreglass, M/s Tiki Tar Danosa (India) Pvt Ltd ( ''HUDROSTOP' ). Make of Primer - M/S STP Ltd ( Shali Tex Primer), M/S Tiki tar Ltd( WB & OB & Tiki Flash.
M & L apply two coats of aluminium paint on roof complete all as specified and as directed
Taking down the existing steel rolling shutters from brackets with connecting rod for servicing and fixing only suspension shaft of 50mm dia GI pipe heavy grade, helical springs, bearings etc., servicing for free movement and smooth function of rolling shutter and fixing unit in original position etc., complete, area not exc 10 Sq m each.
All as per item No 10 here-in-before, but area exc 10 Sqm and n.exc 20 Sqm
All as per item No 10 here-in-before, but exc 20 Sqm
Taking down collapsible steel gates/shutters consisting of channel, pickers, pivoted flat bars, top and bottom runners for servicing and checking its function including fixing only new wheels, top and bottom channels, cleaning and greasing of wheels and channels etc., complete and fixing in its original position complete area exc 2.00 Sqm and n.exc 10 Sqm each.
Supply only 50 mm dia galvanised iron pipe heavy duty (ISI marked) suitable for suspension shaft for rolling shutter (length exc 2m and not exc 6 m)
Supply only helical spring for counter balancing the rolling shutter made out of high tension springs, 115mm bore and 600mm long.
Supply only bearing for rolling shutter 75 to 100 mm dia (Make:SKF)
S&F inter-locking lath sections formed from cold rolled steel strips of 1.25mm thick, suitable for rolling shutter, including removing existing damaged laths from rolling shutters.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, valley gutters etc complete all as specified and as directed
Material and labour for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 MPA as in roof covering/clading to wall fixed with self tapping screws complete all as specified and as directed Note : (a) Approximate height of the work is up to 15 Mtr (b) There is no accessibility to the roof (c) Necessary scafolding for fixing valley gutter to be arranged by contractor etc.,
All as per item 19 above but curve shaped sheets to be fixed as on top of north light panels complete all as specified and as directed
Supply & fix GI plain , galvanised mild steel sheeting, 1.00 mm thick, in ridges. as in valley gutters with grade of zinc coating 275 of fixed with clamp complete all as specified and as directed Note : (a) Approximate height of the work is up to 15 Mtr (b) There is no accessibility to the roof (c) Necessary scafolding for fixing valley gutter to be arranged by contractor etc.,
Demolition of RCC as in Chajja of fourth storey building or height upto and including 10 mtr etc., including cutting old reinforcement to facilitate demolition complete
M&L Reienforced cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in chajja of four storey building or height upto and including 15 mtr etc.including necessary form work/scaffolding etc complete all as specified and as directed
Mild steel bars 10mm dia and over for fourth storey building height or height upto and including 10 mtr etc., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
Labour only for rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15cm but n exc 30cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. (Note : This item is operatable when plastering ordered to be done at specific places as mentioned in the item over and above general plastering item to compensate extra labour cost)
Dismantling water tanks and removing exceeding 500 ltrs and not exceeding 1000 ltrs in capacity.
S & F 1000 ltrs capacity Rotational mouldedd polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and as directed
S & F in repair Ball valves 25 mm bore high pressureof PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed including socket of size suitable if required at site etc,complete all as specified and as directed
S & F in repairs for 20 mm dia ball valve brass high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and ad directed
Taking down cement plaster of any description on walls concrete surfaces including racking out joints hacking for key scrubbing down with water remove dust debries/rubbish etc.
Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work (EXTERNAL) or concrete surfaces finishing the surfaces and even smooth without using extra cement complete
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.
Taking up or down steel water tubing 15 mm dia (bore) including connection and fittings and Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) and as directed by EIC.
Taking up or down steel water tubing 20 mm dia (bore) including connection and fittings and Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) and as directed by EIC.
Taking up or down steel water tubing 25 or 32 mm dia (bore) including connection and fittings and Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) and as directed by EIC.
Taking up or down steel water tubing 40 or 50 mm dia (bore) including connection and fittings and Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) and as directed by EIC.
Demolition of brick/stone/pcc block work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles.
M & L for Type B1 Type 1:2:4 20mm graded graded Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:4, complete all as specified & directed
M&L for Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces and even smooth and as directed by EIC.
S & F in repairs PVC (SWR) pipes single socketed 110 mm bore laid in ring joints, fixed to walls complete all as specifed and as directed.
S & F PVC (SWR) 110 mm bore bends of any radius complete all as specifed and as directed.
S & F in repairs PVC (SWR) pipes single socketed 150 mm bore laid in ring joints, fixed to walls complete all as specifed and as directed.
S & F PVC (SWR) 150 mm bore bends of any radius complete all as specifed and as directed.
Dismantling structural steel work of any description not otherwise provided for
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (GdeE- 250) qualityA.
Fixing only including re adjusting the disturbed 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls
M&L for one coat of floor gurad paint APEX (water based crosslinking all acrylic emulsion paint) with high resistance, over floors like, chequred tiles, paver block, cemented surface & other including cleaing of surface by mechanically/manually complete all as directed by EIC. MAKE-ASIAN APEX FLOOR GUARD.
S&F in repairs venetian blinds(wooden ), horizontal type, 20-30mm slot width of approved wood & top rails linked togeher by a cord pulley system. complete all as specified, including dismantlilng old damaged one completecomplete all as specified and as directed. Note:The colour,design and shade shall be as approved by GE.
M & L apply one coats of aluminium paint on old roof surfaces/old APP Membrance including necessary cleaning & tar laying over cracked membrane complete all as specified and ad directed
Material and labour for 25mm thick cement concrete (1:2:4) type B0 using 12.5 mm graded crushed stone aggregate as sub base flooring (after demolition of tiles where required) complete all as specified.
M&L Double charged vitrified ceramic tiles of size 9-10 mm thick light shade, area of each tile not exceeding 0.36 sqm , in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
Hacking out old broken glass from metal framed including punching or drilling out old glazing pins/spring clips from roof of hangars (height upto 12 to 15m, factory type building/hangar)
Supply and fix rough cast wired figured glass 6.4mm thick of area exc 1.00sqm but not exceeding 1.50sqm fixed to metal frame complete all as specified and as directed
Supply and fix aluminium anodised framed fork for fixing north light glass complete all as specified and as directed
S.R.V.Builders
Ravees Enterprises
SREE BUILDERS
SAI CONSTRUCTIONS
D NAGI REDDY
M.S.Trading Company
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .