REPAIRS AND MAINT OF FENCING COMPOUND WALL FOOT PATH GUARD WALL DRAIN ETC AT INHS DHANVANTARI MNS MESS HQ 34 WEU IDSC AND OTM ACCN AND DAY TO DAY B/R MAINT AT ASHWINI NAGAR, JAYANT PARK, INHS DHANVANTARI AND OTHER ALLIED WORKS UNDER GE MINNIE BAY POR

Amount

Dismantling of tiles of any description or thickness in floor, hearth or wall including cement mortar bedding, removing debris off the premises complete all as specified and directed by Engineer-in-Charge.

M & L for coloured chequered cement concrete tiles 300mm x 300mmx 25mm thick, set and jointed neat cement slurry and pointed with coloured or grey cement match with pigment, over and including15mm thick screed bed or bedding layer in cement mortar 1:6 etc complete all as specified and as directed by Engineer in Charge.

S&F 300x300x9 to 10mm thick (or higher dimension with same thickness) vitrified tiles, heavy duty dura stone, weather proof impact resistant, abrasion resistant tiles of any colour any design as approved including screed bed 15mm thick in cement mortar 1:6, complete all as specified and as directed by Engineer-in-Charge

Dismantling of stone slab of any description including cement mortar bedding but not backing, complete all as specified and directed by Engineer-in-Charge.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills and like in 15mm cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engr-in-Charge

M&L for 60mm thick interlocking paver block with grey cement and pigment of any size and shape confirming to IS 15658-2006, M-40 Grade as approved laid in sand cushioning complete all as specified and directed by Engineer-in-Charge. Note : Sand cushioning shall be measured and paid separatly

M&L Sand filling under floors or in foundations including well ramming and watering for consolidation complete all as specified and directed by Engineer-in-Charge.

M&L for Plain Cement Concrete Type D2 1:4:8 Nominal mix using 40 mm graded stone aggregate as in foundations, filling and mass including formwork concrete complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed by Engineer-in-Charge.

Material and labour for 75mm thick Plain Cement Concrete (1:3:6) Nominal mix type C2 using 40mm graded aggregate as in plinth protection including finishing even and smooth with using extra cement, laid in panel including dummy joints complete all as specified and directed by Engineer-in-Charge.

M&L for 40mm thick plain cement concrete 1:2:4 type B1 (nominal mix) using 20mm graded stone aggregate for paving, sub base path including necessary form work complete all as specified and as directed by Engr-in-Charge

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction complete all as specified and directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing complete all as specified and directed by Engineer-in-Charge.

S & F Aluminium flat iron work in, wind ties screwed as directed, including all necessary drilling, bolting or riveting etc., and similar work complete all as specified and directed by Engineer-in-Charge.

S&F mild steel work in Tubular Trusses, Posts etc including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS - 1161-1979, Grade St - 240, Medium Grade of any dia complete all as specified and as directed by Engineer in charge

Refixing of old galvalume corrugated /steel sheet of any type complete all as specified and directed by Engineer-in-Charge.

Material & Labour for providing and fixing stainless steel (Grade 304) railing in repair made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engineer-in-Charge.

S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

Dismantiling posts of any description , including taking out embedded portion and making good disturbed ground complete all as specified and directed by Engineer-in-Charge.

Excavating in post holes in hard/dense soil n.exc. 0.5 cum and getting out returning, filling in and ramming in layers n.exc. 25 cm, watering and removing surplus soil to a distance n.exc. 50m and making good the surface complete all as specified and directed by Engineer-in-Charge.

S&F Mild Steel framed work such as fencing post including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.

M&L PVC coated GI chain link fencing 3.5mm dia with 50mm x 50mm mesh including fixing of MS line wire / rod, flat iron & machine made hexagonal or square head bolts to fencing posts including dismantling of chain link fencing complete all as specified and directed by Engineer-in-Charge. Note : Supply only of MS rod,flat iron and bolts will be measured and paid seperately.

Supply only mild steel screw bolts n exc 12 mm dia machine made with hexagonal or square head at one end and screwed the other or screwed both ends for fixing of chain link fencing complete all as specified and directed by Engineer-in-Charge.

Supply only MS bars for support to chain link fencing complete all as specified and as directed Fe 410-W(Gde-E-250) quality-A complete all as specified and directed by Engineer-in-Charge.

Supply only MS Flat iron as in fillets for securing wire mesh including all necessary drilling, bolting or riveting etc and similar work confirming to Fe 410-W(Gde-E-250) quality-A complete all as specified and directed by Engineer-in-Charge.

M & L for Plain cement concrete Type B1 1:2:4 (20 mm graded aggregate) in surface channels and drains including formwork complete all as specified and directed by Engineer-in-Charge.

M&L Extra for forming fair finished drain or channel 30 -50 cm inner girth in cement concrete ,using extra cement , including forms , moulds, mi-tred / stopped ends etc complete all as specified and directed by Engineer-in-Charge.

M&L Plain cement concrete type C1 1:3:6 Nominal mix (20 mm graded stone aggregate) in plinth course, benching,copings, kneelers, apex stones etc including weathering, slightly rounded or chamfered angles complete all as specified and directed by Engineer-in-Charge.

Demolition of precast concrete work/ block walling built in cement mortar complete all as specified and directed by Engineer-in-Charge.

Material and labour for PCC solid block masonry (1:3:6) (using 20mm graded stone aggregate) straight or curved on plan exc 6m mean radius, exc 10cm in width and built in CM (1:6) complete all as specified and directed by Engineer-in-Charge.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engineer-in-Charge.

Making arrangement of scaffolding height exc 3 mtr and n exc 13 mtr in the shafts / spot/ location of weed /shrubs of height less than 3 m removing the weed including its root, making good with CM 1:3 or PCC 1:2:4 (12.5mm graded aggregate)including two coats of acrylic paint with primer complete all as specified and directed by Engineer-in-Charge.

M & L for clearing vegetation /Shrubs along with all the debris of leaf from roof slab/ chujjah ,parapet etc and making surface clean ,making good with CM 1:3 or PCC 1:2:4 (12.5mm graded aggregate) as per the requirement complete all as specified and directed by Engineer-in-Charge.

S& F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches floor or wall and similar works complete all as specified and directed by Engineer-in-Charge.

S&F 110 mm dia PVC (SWR) bend with or without oval access door complete all as specified and directed by Engineer-in-Charge.

S&F 110 mm dia PVC (SWR) branch piece (single Y)equal or unequal with oval access door complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of old plastered wall surfaces and applying one coats of acrylic wheather coat emulsion based premium quality matt finish exterior antifungal paint as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge.

M & L for complete removal of existing treatment and Preparation of plastered wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm complete all as specified and as directed

M&L Preparing old steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

M&L Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.

Demolition of Reinforced Cement Concrete [reinforcement cut as required to facilitate demolition] of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.

M&L Reinforced Cement Concrete M-30 grade (Design Mix) using 20mm graded stone aggregate as in columns, pillars, piers, post and struts etc including formwork complete all as specified and directed by Engineer-in-Charge.

M&L for TMT bars 10mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooping for columns, hooking end and binding with and incl mild steel wire not less than 0.9mm dia or securing with clip quality confirming to deformed or twisted bars.

M&L for Plain Cement Concrete type B1 (1:2:4) using 20mm graded stone aggregate as in copings cavings, bed plats and embeding swan neck fencing post, etc incl weathering slightly rounded or chamfered angles and throating including formwork complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster on brick or stone wall and racking out joints hacking for key scrubing down with water etc complete all as specified and directed by Engineer-in-Charge.

M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge. Note: Water proofing compound will be measured and paid separately.

M & L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces complete all as specified and as directed

M&L in repairs for galvanised, 2 strand steel barbed wire 2mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of stranded rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staple or steel pins etc complete all as specified and directed by Engineer-in-Charge. Note : each line wire to be measured and paid separately.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each including iron mongeries complete all as specified and directed by Engineer-in-Charge.

Taking down Chowkhats or frames n exc 1.5sq. m each including iron mongeries complete all as specified and directed by Engineer-in-Charge.

Taking down Shutters of any description n.exc 1.0 sq. m each including builders hardware complete all as specified and directed by Engineer-in-Charge.

Taking down Shutters of any description exc 1.0 sq. m but not exc 2.00 sqm each including builders hardware complete all as specified and directed by Engineer-in-Charge.

S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of rudraksh colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F second class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed by Engineer-in-Charge.

S & F second class hard wood factory made 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge.

S & F second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and directed by Engineer-in-Charge.

S & F 100mm length Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 including screws complete all as specified and directed by Engineer-in-Charge.

S&F extruded aluminium alloy handle fabricated type anodised 100mm long complete all as specified and directed by Engineer-in-Charge.

S&F extruded aluminium alloy handle fabricated type anodised 150mm long complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium anodised sliding door bolts 250 mm long with hasp and staple complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium anodised sliding door bolts 300mm long with hasp and staple complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 100mm length Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 including screws complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Stainless steel butt hinges 100mm size medium weight complete all as specified and directed by Engineer-in-Charge.

S&F in repairs extruded aluminium alloy handle fabricated type anodised 150mm long complete all as specified and directed by Engineer-in-Charge.

S&F in repairs aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed by Engineer-in-Charge.

S&F in repairs aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Aluminium anodised sliding door bolts 250 mm long with hasp and staple complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Aluminium anodised sliding door bolts 300mm long with hasp and staple complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between61 to 80 kg and fixed complete all as specified and directed by Engineer-in-Charge.

S & F in repairs Floor Door Stopper of size 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge.

M&L preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 18mm thick Medium density fibre board, exterior grade, fixed to timber framework with screws in cup board shutters,shelves and partition etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 100mm long hasp and staples mild steel wire type stove enamelled black including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stainless steel auto closing heavy duty modular hinges of size 103 x 64mm for cupboard shutters complete all as specified and directed by Engineer-in-Charge.

S & F in repair fancy type curtain Rod, stainless steel, chromium plated 25 mm dia with stops, rollers etc complete all as specified and directed by Engineer-in-Charge.

S & F in repair brass brackets fancy type chromium plated suitable for curtain Rod 25 mm dia complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old wooden surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old steel surfaces exc 10cm width and girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

S&F in repair aluminium door seals of 32 mm (overall size) with standadrd 1 mm thick aluminium sections and bottom brush and provision of counter sunk holes for screws etc complete all as specified and directed by Engineer-in-Charge.

S&F in repair steel wheel for sliding cup board shutters as per existing OEM compatibility including refixing of cup board shutter complete all as specified and directed by Engineer-in-Charge.

M&L taking out window,ventilator shutter and replacing friction hinges and glazing and beading and re fixing the shutter complete all as specified and directed by Engineer-in-Charge.

Taking up or down 20 mm bore tubing and connections and removing off the site complete all as specified and directed by Engineer-in-Charge.

Taking up or down 25 mm bore tubing and connections and removing off the site complete all as specified and directed by Engineer-in-Charge.

Supply and laying of CPVC pipes 20 mm dia outer boreSDR 11 &plain CPVC SDR 11with all special fittings on walls /ceilings or laying in floors complete all as specified and directed by Engineer-in-Charge.

Supply and laying of CPVC pipes 25mm dia outer boreSDR 11 &plain CPVC SDR 11 with all special fittings on walls /ceilings or laying in floors complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20 mm outer dia CPVC Male Brass Threaded Adaptor complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 25 mm outer dia CPVC Male Brass Threaded Adaptor complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20 mm outer dia CPVC pipes brass Elbow complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20mm outer dia CPVC pipes brass Elbow (3/4 X1/2) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20mm outer dia CPVC female brass adaptor complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 25 mm outer dia CPVC female brass adaptor complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 25 mm outer dia tank Adaptor complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20mm outer dia union complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 25 mm outer dia union complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 20 mm outer dia Brass Tee complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 15 mm dia Bib Taps with flange, cast copper alloy heavy duty, Chromium Plated, long body Fancy Type screwed down for iron pipe and fixed etc complete all as specified and as directed by Engineer-in-Charge.

S & F in repair Pillar taps, cast copper alloy, Chromium Plated, Fancy Type heavy duty, 15 mm dia, with capstan head, screwed down high pressure screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.

Supply & fix in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm complete all fixed to aluminum shutters including necessary adjustments, dismantling and re-securing complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

Supply only brass spindles for bib cock, stop cock, wall/ basin mixer etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair 32/40mm bore PVC waste pipe complete all as specified and directed by Engineer-in-Charge.

Fixing only in repairs Bib Cock/Stop Cock/wall Mixer including cleaning, removing of blockages etc. of any type and size including replacement of brass spindle if required all as specified. complete all as specified and as directed by Engineer-in-Charge. Note : Brass spindle will be measured and paid separately under relevant item of this schedule.

Supply only brass spindles for bib cock, stop cock, wall/ basin mixer etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair 32/40mm bore PVC waste pipe complete all as specified and directed by Engineer-in-Charge.

Suppy and fix in repair CP waste coupling for sink/WHB complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs PVC water closet seat cover white, closed pattern and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.

Repairs to PVC flushing cistern by replacing minor parts like flushing knob, float, screws, washers including connecting to existing water supply line and water closet pan complete all as specified and directed by Engineer-in-Charge.

S & F in repairs 10 Liters capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe of Make Slimline or Cera or equivalent make complete all as specified and as directed.

S&F in repair brass chromium plated telescopic Hand shower (Health Faucet) with 1 Meter long Easy Flex Tube in Chrome Finish & wall Hook all as specified.

S & F in repair Two way Bib Taps, cast copper alloy, 15 mm dia, Chromium Plated, Fancy Type with crutch or butterfly handle, screwed down for iron pipe and fixed etc complete all as specified and as directed. Model No: jaquar KUP-35041PM

S&F in repairs stop valves (concealed) cast copper alloy chromium plated with long shank and cup fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore,including necessary cutting and making good wall or floor tiling to match existing(tiles to be paid supplied only rates) etc complete all as specified and as directed.

S&F in repairs PVC flexible connection with PTMT nuts, of 15mm dia and 600mm long with brass unions and rubber washers on either side, for connecting water supply line to WHB, flushtank ,Geyser etc, complete all as specified.

S&F in repair overhead shower 120mm round shape, single flow (ABS body chrome plated with grey face palte) with rubit cleaning system including wall mounted shower arm casted 190mm long flat shape, wall flange and suitable for 15 mm bore pipes complete all as specified and as directed. Model No: Jaquar OHS-1789, SHA-483

S&F Aluminium anodised window and ventilator members for replacement of unserviceable members in window, ventilators etc.,complete all as specified and as directed.

S & F in repair Figured glass 4 mm,pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed.

Chandra Construction Enterprises

Allied Trading Company

bansal construction

SKY GROUP

Ravi Enterprises

BISAKHA PLUMBING WORKS

M/s Pooja Enterprises