SPECIAL REPAIRS TO OLD VINTAGE STORAGE SHEDS AND ADDITION ALTERATION AND SPECIAL REPAIRS TO BUILDING NOS. P-41, T-70, T-23, T-08, T-33, T-37 AT NARANGI MILITARY STATION UNDER GE NARANGI.

Amount

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 1205.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 2950.00

M & L for Sand cushioning/Sand covering with clean dry sand to the full width for protection of underground cable including punning down the thickness of sand upto 18cm and consolidated complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 15.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 18.00

M & L for hardcore with broken stone or boulder of gauge not exc 63 mm, deposited , spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surfaces complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 168.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 391.00

M & L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection etc, providing 10mm groves at every 3 meter interval and corners filled with bituminious filler, finished the surface even and smooth without using extra cement complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 180.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 842.00

M & L for PCC 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in surface channel or drain including necessary form work complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 13.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 30.00

M&L for cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre including metallic hardener in the ratio as per manufacturer instruction, thickness of concrete 25 cm or more complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 1205.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 2950.00

M & L for 100 mm thick PCC 1:2:4, type B2 (using 40 mm graded stone aggregates) as in path / paving / hard standing / floor and finished the surface even and smooth without using extra cement complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 588.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 1512.00

S & F Polythene film, black, 150micron laid in floors complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 588.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 1512.00

M & L for forming 12 mm wide expansion joints 100 mm thick concrete slab filled with pre-formed bituminous filler and top 30 mm primed and sealed with polyurethane sealant complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 15.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 20.00

M & L for forming Construction joint 30mm deep x10mm wide, sealed with polyurethane sealant complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 12.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 15.00

M & L for forming contraction (dummy) joints 65mm deep x10mm wide, sealed with polyurethane sealant complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 379.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 975.00

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for including removal of spoils/ demolished materials not exceeding 50m and depositing complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 7.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 =27.00

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cutting, bending cranking, hooking end and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 596.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 =2385.00

M & L for pre cast RCC cover slab, type A-1, 1:1.5:3 nominal Mix (Using 20 mm graded crushed stone aggregate ) as in manhole cover slab etc., and set in cement mortar 1:6 including necessary form work complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 7.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 27.00

Demolition of brick or stone masonry work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 147.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 261.00

M & L for brick work with sub class ‘B’ bricks old size (locally available best quality) straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 110.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 261.00

Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 200.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 200.00

M & L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 1800.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 4000.00

M&L for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to other than fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound as per manufacture's instructions, finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately as "Supply only". Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 2000.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 3000.00

Supply only liquid water proofing compound complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 7.50 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 7.50

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 1800.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

M&L for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 200.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 800.00

M&L for preparation of newly plastered surfaces of walls and applying two coats of acrylic distemper over one coat of chalk whiting complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 0.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 4000.00

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 2000.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 3000.00

Dismantling of plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding etc., complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 8535.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 22957.00

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 20.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 100.00

M & L for rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St.-240 complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 6640.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 16650.00

S&F Pre- painted galvalume aluminum zinc coating AZ-150 GI based semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 8379.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 22221.00

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.80mm thick in ridge, hips, valley gutters, drip and straight flashings, fixed with self tapping screws complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 156.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 288.00

S&F in repairs, Fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer as in roof, wall etc complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 67.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 269.00

S&F Tie bars with screwed end, nuts, washers and mild steel plates for walls, chimneys, roofs, arches,etc King rods and straining bolts conforming to Fe 290 Gde E-165 complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 150.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 150.00

S & F in repairs, for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure steam Cured Non Asbestos Fiber Cement plain Board (E-Board Classic) in a grid of GI system duly suspended with 3mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjacent wall, Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c, so as to form 600mm x 600 mm grid complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 0.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 148.00

Dismantling timber scantling 40Sqcm and over in section unframed work in any position complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 8.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 3.00

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm including builders hardware each complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 96.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 222.00

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 6.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

M&L for 1.25mm thick mild steel pressed steel frames of size 105x60mm for doors with single rebates including necessary fixing lugs, hinges, lock strike plate, including painting with two coats of synthetic enamel paints over a coat of red oxide, zinc chrome primer complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 30.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

S & F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 15.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 12.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

S&F 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 12.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

S & F 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 6.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

M&L for preparation of new wood or wood based surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of pink primer complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 45.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

S&F steel windows with side hung shutters glazed shutter including projecting type hinges with steel handle and steel peg stay with glazing bars and 12 mm square guard bar of approved design welded to steel window frame dovetailed or welded complete all as specified and as directed. Note : Guard bar shall be measured and paid separately. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 114.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 270.00

S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe 290, Gde-E-165 completed all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 700.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 1500.00

S&F Plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases, splices, angle brackets, cleats and other connections and similar work conforming to Fe 410-w, Gde-E-250 quality B completed all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 600.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 1500.00

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 completed all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 5600.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 4100.00

M & L for preparation of new steel surface over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 300.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 500.00

M & L for preparation of new steel surface not exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide Zinc chrome primer complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 20.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 20.00

M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 1700.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 3000.00

S&F Rough cast wired glass, 6 mm thick and glazing with oil putty in square n exc 0.5 sq. m in each pane etc complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 40.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 50.00

S&F 3.5mm thick frosted glass, ordinary quality and glazing with oil putty in square not exceeding 0.50sqm in each pane complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 35.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 110.00

Taking down PVC pipe of 100mm dia including all fitting head, shoe, band, swan neck etc complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 94.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 150.00

S & F 160 mm dia PVC (SWR) pipes type 'A', single socketed in any length with rubber ring joints and laid in trenches or in floor complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 94.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 150.00

S & F 160 mm dia PVC (SWR) bends of any radius complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 20.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 23.00

S & F 100 mm thick machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 M-50 Grade over and including 30 mm thick sand bed including dismantling of old paver complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 223.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

S & F 80 mm thick machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 M-40 Grade over and including 30 mm thick sand bed including dismantling of old paver complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 0.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 260.00

M&L for precast cement concrete Kerbs stone type B-1 1:2:4, (using 20 mm graded stone aggregate) in rounded or chamfered on edges and jointed in cement mortar 1:4 complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 2.50 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 2.50

Taking down carefully any type of point wiring (light, fan, bell, socket or power), complete excluding fittings but including switches, ceiling roses, pendants, regulators, sockets, etc. and making good disturbed surfaces of walls, ceiling, floors etc to match with existing surface complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 324.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 746.00

M&L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FRLS cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm copper conductor cable (including connecting to earth dolly) laid/fixed with and including stove enamelled steel conduit on walls/ceiling, and with sunk type pressed steel terminal box made out of galvanised iron sheet thickness not less than 1mm and 3 mm thick plastic laminated sheet top covers for one light/fan/exhaust fan point controlled by one number one way 5 Amp switch complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 194.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

All as per item serial No 58 here-in-before but for One 3 pin 5 Amp switch socket outlet on same board with other switches. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 30.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

All as per item serial No 58 here-in-before but for One 3 pin 5 Amp switch socket outlet on independent board. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 65.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

All as per item serial No 58 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable and earth continuity wire with 2.5 Sqmm cable for 6 pin 15 Amp socket outlet on independent board. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 35.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

M&L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FRLS cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm copper conductor cable (including connecting to earth dolly) laid/fixed with and including PVC rigid conduit on walls/ceiling, in galvanized metal box of 1.6 mm thick and 3 mm thick plastic laminated sheet top covers for one light/fan/exhaust fan point controlled by one number one way 5 Amp switch piano complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 0.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 300.00

All as per item serial No 62 here-in-before but for One 3 pin 5 Amp switch socket outlet on same board with other switches. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 0.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 41.00

M&L for point wiring with 2.5 sqmm, single core, PVC insulated and PVC unsheathed FRLS cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with 2.5 Sqmm copper conductor cable (including connecting to earth dolly) laid/fixed with and including PVC rigid conduit on walls/ceiling, in galvanized metal box of 1.6 mm thick including one coat of syenthetic enamelled black paint and 3 mm thick plastic laminated sheet top covers for one light/fan/exhaust fan point controlled by one number one way 5 Amp switch piano complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 0.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 290.00

All as per item serial No 64 here-in-before but for One 3 pin 5 Amp switch socket outlet on independent board. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 0.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 62.00

All as per item serial No 64 here-in-before but for One 3/6 pin 15 Amp switch socket outlet on independent board. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 0.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 53.00

S & F switch piano, flush type single pole one way 5 Amps 230/240 volt complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 224.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 631.00

S&F socket outlet 3 pin, 2-in-1, 5 Amps, flush type complete all as specified and as directed.Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 30.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 41.00

S & F switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 65.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 62.00

S & F switch socket combination, multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 35.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 53.00

S & F ceiling rose surface bakelite, 65x50mm three terminal complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 224.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 698.00

S & F in repairs intregral LED 4ft luminaire of CRCA / extruded aluminium housing and PC diffuser (Diffuser-Non yellowing type). The luminaire should have a 20 Watt LED with colour consistency SDCM< 5,CRI> 80 and colour temperature - 4000 to 6500K, Luminaire shall be designed to emit at least 2000 nominal lumens at a system efficacy of at-least 120 lumen/watt, power consumption should not be more than 18W (+5%). the life of fixture (including Driver): 50000 burning Hrs.@ L70B50 Lumen maintenance @ design ambient temp 50 deg C. The electronic driver used shall have a power factor >0.95 and THD < 10% suitable for an operating voltage range of 150-270V AC current Ripple<5% internal surge protection should be minimum 2.5KV, electrical insulation class should be Class I &driver should be of class B serviceability. The luminaire should be at least IP20 & IK02 rated. The luminaire driver shall be of the same make/manufacturer as that of LED luminaires. Luminaire manufacturer must have in house NABL accredited lab conduct LM79, type test as per IS10322 & "FAT" before dispatch as per IS 10322. The contractor must submit the NABL accreditation certificate for luminaire manufacturer along along with sample approval. The LED Luminaire & It's driver both should be BIS registered contractor shall submit the following reports before supply of material for approvals LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer type test certificate for luminaire as issued by NABL accredited lab, RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire & Driver complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 162.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 300.00

S & F Sheet metal enclosure for with two pin and earth plug and socket complete with SPN MCB upto 32 Amps, 240 Volts capacity and tested on complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 4.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

S & F triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB of rating 20 Amp suitable for three phase 415 V complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 8.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

S & F 1200mm sweep BEE 5 star rated, Ceiling fan with Brush Less Direct Current (BLDC) Motor, Class of insulation : B, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery not less than 230 CMM,350 RPM (tolerance as per IS:374-2019), THD less than 10%,including remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nuts bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply complete and writing MES No. and date of fixing with black synthetic enamel paint 2 cm high in letteras including taking down old ceiling fan and deposited the same to MES store yard complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 20.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

S & F wall mounted type air circulating fans of 400 mm sweep, 03 blades aerodynamically balanced with 60 degree oscillation, air delivery not less than 76 M3/Min, 1500 RPM, working Voltage range 230 V, with service value not less than 1.2 BEE 5 star rated with brush less direct current motor(BLDC), the super efficient BLDC motor 50Hz and Noise level not more than 64 dB with 2 years warranty complete and taking down old fan and deposited in MES store complete and writing MES No. and date of fixing with black synthetic enamel paint 2 cm high in letter complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 12.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

S & F in repairs, MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC (1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 1.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

S & F in repairs, MCB DB factory made, sheet steel distribution boards, TPN, 4 Way, double door,with provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 5.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 10.00

S&F MCCB 4P, 100 Amps 415 V, Icu16 KA, thermal magnetic complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 1.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

S&F MCB Tripple pole & neutral 40 to 100 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series rupturing capacity providing in DB complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 5.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 =10.00

S & F in repairs, Single pole & neutral DBs, 12 Ways, double door, protection class IP-42 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 14.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 34.00

S & F in repairs, RCBO with earth leakage, over load and short circuit proptection, two pole, 230 Volts, 32 Amps, 100 mA senstivity, 4 Module complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 0.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 48.00

S&F MCBs, SP 6 to 32 Amps, 10 KA, IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 84.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 244.00

S&F MCBs, SP 40 Amps, 10 KA, IS/IEC 60898-1 2002, C series marked fixing in DBs complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 40.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

M & L for sub main wiring with 2 runs of 1.5 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dia steel conduit, ISI marked with all accessories such as Tees, Elbows, junction box, reducers etc as required alongwith one run of 1.5 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 1.5 Sqmm cable and 1 run of 1.5 Sqmm cable along with steel conduit altogether shall be measured as one unit. Note : For item No 85 to 90, cutting chases for concealed sub main wiring for the following points and making good in cement mortar is deemed included in unit rate. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 2620.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

M & L for sub main wiring with 2 runs of 2.5 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia steel conduit with all accessories such as Tees, Elbows, junction box, reducers etc as required alongwith one run of 2.5 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old sub main wiring and type of conduit complete all as specified and directed. Note: 2 run of 2.5 Sqmm cable and 1 run of 2.5 Sqmm cable along with steel conduit altogether shall be measured as one unit. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 713.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

M&L for sub main wiring with PVC insulated unsheathed copper conductor multi stranded FR-LSH type 1100V grade 2 x 2.5 sqmm complete drawn in new PVC conduit and its accessories along with 1x 2.5 sqmm PVC insulated unsheathed copper conductor multi stranded FR-LSH type cable for continuous earth wire and duly connected to common earth dolly including taking down old sub sub main wiring complete all as specified and as directed. Note: 2 run of 2.5 Sqmm cable and 1 run of 2.5 Sqmm cable along with PVC conduit altogether shall be measured as one unit. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 0.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 1700.00

M & L for Sub main wiring with 2 runs of 4.0 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia steel conduit with all accessories such as Tees, Elbows, junction box, reducers etc as required alongwith one run of 4.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with steel conduit altogether shall be measured as one unit. \Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 165.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

M&L for sub main wiring with PVC insulated unsheathed copper conductor multi stranded FR-LSH type 1100V grade 2 x 4 sqmm complete drawn in new PVC conduit and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FR-LSH type cable for continuous earth wire and duly connected to common earth dolly including taking down old sub main wiring complete all as specified and as directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with PVC conduit altogether shall be measured as one unit. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 0.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 1539.00

M&L for sub main wiring with 4 runs of 6 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia steel conduit with all accessories such as Tees, Elbows, junction box, reducers etc as required alongwith two run of 6 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuous earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and any type of conduit complete all as specified and as directed. Note: 4 run of 6 Sqmm cable and 2 run of 6 Sqmm cable along with steel conduit altogether shall be measured as one unit. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 120.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 0.00

S & F LED street light fitting of 35 Watt high-quality group control enabled integrated LED Street Light with a minimum system lumen of min 3000 lm and system wattage not exceeding 35W with a nominal system efficacy of 110 lumen/watt. The LED used shall have CCT of 5700K, SDCM ≤ 5 and CRI≥70. The housing should be made of LM6/ADC12 Alloy, non-corrosive Single Piece pressure die-cast aluminum, to withstand extreme environments. The spigot shall be part of “Single Piece Pressure Die-cast housing” & shall not be bolted to the luminaire housing to ensure robust design. The name of the brand should be embossed/engraved & should not be mentioned using sticker/screen printing. It should have corrosion resistant powder coating to pass NSS of 500 Hrs. The luminaire LED shall have declared Lifetime of 75K hours@L70B59. The product should be designed for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP66 & impact resistance shall be IK10. Control gear compartments shall be Top maintainable without accessing/opening the optical compartment. The Luminaire should have a minimum 20 KV/10KA SPD duly bolted in the Luminaire. The SPD should be able to sustain a minimum 15 hits of 10KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2. The luminaire should be of Class B Serviceability. The LED used in the luminaire shall be SMD type only & shall be from either Lumileds, Osram, Nichia, Cree & APT Electronics make or equivalent. The Driver should be asphalt potted & should be a BIS approved driver. The driver shall have operating voltage of 120V to 270V, PF≥0.95 @ full load, THD≤10% @ full load. The driver should be capable of withstand voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V(±15V) and have an auto recovery feature. The driver shall comply to IEC61547 & IEC 61000-3-2. The luminaire driver & it’s SPD shall be of the same make/manufacturer as that of LED luminaires. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322 & "FAT" before dispatch as per IS 10322. The contractor must submit the NABL accreditation certificate for Luminaire manufacturer along with sample approval. The LED Luminaire & it's driver both should be BIS registered. The contractor shall submit the following reports before supply of material for approvals: LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test report for luminaire as issued by NABL accredited lab, RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire & Driver complete. The product complying to above specs in signify, LT or Endo including taking down old street light fitting complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 112.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 108.00

S & F LED high bay light fitting of not more than 70W system wattage, high-quality group control enabled integrated LED high bay light with a minimum system lumen of min 10000 lm with a nominal system efficacy of 160 lumen/watt. The LED used shall have CCT of 5700K, and CRI≥70. The luminaire should be designed for operations under diverse envirornment from -10°C to 50°C. The luminaire should be beam angle of light source 30°/60°/90° as per requirement. The housing should be made of LM6/ADC12 Alloy, non-corrosive Single Piece pressure die-cast aluminum, to withstand extreme environments. The spigot shall be part of “Single Piece Pressure Die-cast housing” & shall not be bolted to the luminaire housing to ensure robust design. The name of the brand should be embossed/engraved & should not be mentioned using sticker/screen printing. The luminaire LED shall have declared Lifetime of 50 Khrs (L70B5O @ Ta 45°C). The product should be designed for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP65 & impact resistance shall be IK08. Control gear compartments shall be Top maintainable without accessing/opening the optical compartment. The Luminaire should have a minimum 6KA SPD duly bolted in the Luminaire. The LED used in the luminaire shall be SMD type only & shall be from either Lumileds, Osram, Nichia, Cree & APT Electronics make or equivalent. The Driver should be asphalt potted & should be a BIS approved driver. The driver shall have operating voltage of 120V to 270V, PF≥0.95 @ full load, THD≤10% @ full load, Current ripple <10%. The driver should be capable of withstand voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V(±15V) and have an auto recovery feature. The driver shall comply to IEC61547 & IEC 61000-3-2. The luminaire driver & it’s SPD shall be of the same make/manufacturer as that of LED luminaires. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79, Type test as per IS10322 & "FAT" before dispatch as per IS 10322. The contractor must submit the NABL accreditation certificate for Luminaire manufacturer along with sample approval. The LED Luminaire & it's driver both should be BIS registered. The contractor shall submit the following reports before supply of material for approvals: LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test report for luminaire as issued by NABL accredited lab, RoHS compliance issued by LED luminaire manufacturer, BIS certificate for LED Luminaire & Driver complete. The product complying to above specs in signify, LT or Endo including taking down old high bay light fitting complete all as specified and as directed. Note :- Contractor shall submit Lux level report from the OEM of LED fixture based on user’s requirement & same shall be approved by GE before confirming No of fixtures to be procured through OEM. . Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 80.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 290.00

M&L for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including 4mm dia GI wire upto 7.5 m by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 15mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, charcoal,salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including taking down old one and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 6.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 10.00

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes, laying of cable etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 60.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 57.00

Supply, laying and testing XLPE Insulated , PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 25 sqmm 4 core laid in trenches /floor or fixed on wall/pole with brass compression cable glands, terminal lugs etc, including taking out old cable complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 350.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 400.00

M&L for sub class ‘B’ old size well burnt brick laid flat in trenches with length of brick perpendicular to length of cable, over the cable for protection of LT cable complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 1.60 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 2.30

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 35.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 27.00

Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 25.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 30.00

M& L for manual boring under roads/hard standing using required T&P without disturbing the top surface of the road, inserting GI pipe n exc 80 mm dia for cable protection complete all as specified and as directed. Note : - GI pipe will be measured & paid separately. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 20.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 20.00

M&L for GI pipe light grade 40mm bore with all fittings to be laid in trenches or in floors, complete including taking down old rusted one complete all as specified and as directed. Quantity against Job No : 51SA/Spl/Bldg/24/2023-24 = 30.00 Quantity against Job No : 51SA/Maj WK/01/24/2024-25 = 32.00

MS ASHIRVAD ASSOCIATES (BID ID -3102022)

M/S SUNRISE ENTERPRISE (BID ID -3080118)

M/S ALLIED CONSTRUCTION (BID ID -3079242)

vijay infraprojects pvt ltd (BID ID -3080323)

HTE INFRA LLP (BID ID -3095157)