Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.9 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹49.6 L+₹28,075 (0.57%)Rejected-Finance | L2 | Rejected-Finance Higher bid value | |
| 3 | L3₹49.9 L+₹63,073 (1.28%)Rejected-Finance | L3 | Rejected-Finance Higher bid value | |
| 4 | L4₹51.7 L+₹2.4 L (4.88%)Rejected-Finance | L4 | Rejected-Finance Higher bid value | |
| 5 | L5₹51.9 L+₹2.5 L (5.17%)Rejected-Finance | L5 | Rejected-Finance Higher bid value |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
26 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
REPAIR/ MAINT OF B/R AND E/M ITEMS INCL PERIODICAL SERVICES TO JCO/OR MD ACCN AT UMED VIHAR AND IMLI AKUM VIHAR AT RMS UNDER AGE B/R-II.
2022_MES_517686_3
8439/C/E8
Open Tender
Civil Works
Item Rate
335 days
RANGAPAHAR
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
GE 868 EWS
₹95,000
Yes
12 Aug 2022
5 Jul 2022
28 Jul 2022
5 Jul 2022
26 Jul 2022
12 Jul 2022
60 days
Amount
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified .
Dismantling structural steel work including doors, gates but excluding framed truss etc
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing.
Taking down chowkhat or frame with shutter without taking off shutters from the frame, size of shutter not exceeding 1.5 Sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each.
Taking down shutters of any description not exceeding 1 Sqm each.
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified
S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed GI grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified.
S & F in repair for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed with aluminium/GI grid/section complete all as specified.
M&L framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel door fittings (exclusive of steel Framed work as in doors orgates of angle or other section with gusset plates, rails.braces, etc., complete, drilled forfi xing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging S&F door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete
M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/coloured cement to match all as specified.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick exc 0.11 Sqm but n exc 0.18 Sqm set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/coloured cement to match all as specified.
All as per item No 15.00 above here-in-before but in skirting.
M&L for ceramic coloured printed tiles of size 300x200mmx7 mm thick, on verticals surfaces, set and jointed in neat cement slurry and pointed in coloured.
M&L for non - skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/coloured cement to match all as specified.
All as per item No 18 above here-in-before but in skirting.
M&L for rendering 10 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces to received vertical tiles complete all as specified and directed.
M&L for 40 mm thk PCC 1:2:4 type B-1 using20mm graded agg as in flooring finished even and smooth with using extra cement complete all as specified and directed.
M&L 75 mm thick cement concrete type C2 1:3:6 (40 mm graded aggregate) as in plinth protection, using extra cement for finishing.
M & L for PCC (1:3:6) type C-2 using 20mm graded aggregate as in coping including necessary form work all as specified and directed
Taking down cement plaster on walls built in cement mortar etc including racking out joints, hacking for key, scrubbing down with water etc.
M&L for 15mm thick cement plastering in cement mortar 1:6 brick or concrete surfaces of wall finished fair and even complete all as specified and directed.
M&L for 15mm thick cement plastering in cement mortar 1:4 brick or concrete surfaces of wall finished fair and even with out using extra cement complete all as specified and directed.
M&L for 5mm thick cement plastering in cement mortar 1:3 ceiling surfaces finished fair and even,complete all as specified and directed.
Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.,including one shop coat of primer complete as specified, supplied and fixed.
S&F factory made 30mm thick, flush shutters, solid core construction, with block board core and plywood face panels complete all as specified and directed.
S&F for second class hardwood 35 mm thick plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated.
S&F for second class hardwood glazed and skeleton door shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats.
S&F for second class hardwood glazed and skeleton window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats.
Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints.
S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening.
S&F for Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site.
M & L for block boards, 18/19 mm thick, grade 2 quality, interior grade , commercial type fixed with screws to timber frame work , for cup board including lipping / beading as required complete all as specified and directed.
S & F 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, for cup board including lipping / beading as required complete all as specified and directed.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
ditto above as item no 38.00 but without glazing bar.
S&F for Chimney bars (straight or camber) bearing bars; tongues or water bars for window frames, window guard bars, plain, let in and fixed independently in wooden frames L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane.
Hacking out old broken glass of any thickness size or description from wooden frames or metal frames fixed with wooden beads/ putty and providing and fixing new ones.
S&F for galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples.
S&F in repairs, galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples.
S&F in repairs Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane.
S&F for mild steel conforming to Fe 410-0 or Fe 310-0 in bands, straps, supports or stays for rain water, including bolts, if required, hook and pintle hinges; hand made sliding bolts; clamps; hold fasts; hooks for hanging fans and similar small articles.
S&F Butt hinges, medium weight, cold rolled mild steel, 75mm size.
S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size.
S&F Aluminium, anodised, barrel tower bolt 200mm long of extruded section and fixed complete.
S&F Aluminium, anodised, barrel tower bolt 150mm long of extruded section and fixed complete.
S&F for 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed.
S&F Extruded aluminum alloy handles, fabricated type, anodised 100 mm size.
S&F Extruded aluminum alloy handles, fabricated type, anodised 150 mm size.
M&L for preparation of new plastered surfaces of walls and applying two coat of oil bond distemper over a coat of primer all as specified.
S&F in repair floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor
M&L for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint in any tint complete all as specified & directed.
M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint all as specified and directed
M&L for two coats of synthetic enamel paints over a coats of red oxide primer including prepration of new steel surfaces of any description over 10 cm in width or girth not otherwise described
M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed.
M&L for Preparation of old decorated surfaces and appplying one coat of white wash on walls, cornices etc. complete all as specified and directed.
All as per item No 60.00 above but on ceiling.
Complete removal of existing treatment of walls and preparation of old surfaces of wall including scrapping down, smoke soot, efflorescent salts trading oil and greasy spots etc applying two coats of cement base paint over a coat of chalk whitening/primer complete all as specified and as directed.
M&L preparation of old surfaces of walls applying one coats of cement base paint complete all as specified and as directed.
M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying one coat of oil bound distemper on walls.all as specified and directed
M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over a coat of primer on old surfaces of walls complete all as specified and directed.
M&L for complete removal of existing treatment of wall and applying two coats of distemper oil emulsion over a coat of 3mm thick wall care putty filling complete all as specified and directed.
M&L for preparation new surface of wall and applying two coats of distemper oil bound over a coat of 3mm thick wall care putty filling complete all as specified and directed.
M&L for Preparation of new surfaces and appplying two coat of white wash on ceiling, cornices etc. complete all as specified and directed.
M&L preparation of new surfaces of walls & applying two coats cement base paint over a coat of primer complete all as specified and directed.
S&F in repair 15mm bore bib cock chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule.
S&F in repair 15mm dia pillar tap cast copper alloy chromium plated fancy type (ISI Marked)
S&F GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes.
S&F GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes.
S&F brass chromium plated angle cock 15mm bore with crutch or butterfly handle screwed to iron pipe, fixed in repair.
S&F in repair CP towel rail 600mm long with brackets, chromium plated 20mm dia in repair
S&F brass CP shower rose 100mm size with swivel joint fixed in repairs.
S&F in repair PVC low level flushing cistern of 10 ltrs capacity incl flush pipe complete fixed in repairs.
S&F in repair vitreous china wash down water closet (pedestal pattern) with plastic seat cover including PVC low level flushing cistern 10 ltrs capacity complete as directed by Engr-in-Charge.
M&L for vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete all as per specified and directed.
S&F mirror of size 450x600x5mm thick with aluminium frame and mounted on 6mm ply confirming to IS, with two Nos of hanging hooks fixed in repairs.
S&F in repair PVC connection pipe 15mm bore 450mm long.
S&F waste pipe 750 long for WHB or sink in repairs.
S&F Wash basins, Vitreous China (flat back or angle back type) any size, including cuttin g forand pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe in repair flat back size 550x400mm.
S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F CP Health faucet for WC.
S&F plastic water closet seat cover, black closed pattern with flat bottom and cover and MS chromium plated or aluminium hanging device ,fixed in repair, complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position including taking out water closet Indian type/ EWC and removal of lime concrete bed, 'P' or 'S' trap and cleaning the sunken portion complete all as directed.
M&L Water proofing treatment on RCC roof etc. comprising with the following operations and as specified herein below :- (a) Taking down/scrapping out existing old tarfelt bituminous compound including, sweeping, cleaning, washing down to remove dust etc and removing debris to a distance n.exc. 250m. (b) 15 mm thick plastering in cement mortar 1:4 mixed with WPC @ 3% by weight of cement finished even & smooth and curing for minimum 7 days. (c) Preparing & cleaning of fully dried cement plastered surface (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per Sqm conforming IS-3384 - 1986 (e) A layer of APP based polymeric membrane 3mm thick (minimum), weighing 3.5 kg per Sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/sqm )shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm on longitudinal direction.
M&L (a) Top of RCC slab in sunken portion including peripheral beams shall be plastered with 15mm thick ement and sand mortar (1:3) using approved water proofing compound @ rate of 3% by wt of cement and finished even and smooth with out using extra cement and curved adequately and allowed to dry. (b) Two coat of epoxy resin/polymer modified cementaticious coating like brush bond of Fosroc or equivalent both on floor or wall/beam shall be applied as per manufacturer's instruction. (c) Slab to be given 1:20 slope outwards with 25mm GI pipes spout with 300mm projection beyond outer surface of wall. (d) Water tightness by flooding for 72 hours the same shall be filled with lean concrete (1:4:8) type D2 using cinder upto required depth (lean concrete will be measured seperately). Surrounding to WC Pan shall howeverbe of lime concrete as spd and directed. (e) All stages shall be passed by GE personally.
M & L cement concrete type D-2, 1:4:8, using 40mm graded aggregate as in foundations, fillings and mass concrete.
Complete removal of existing treatment on wall/roof projection including facia,cormices etc by scrapping with mechancial sander (having mechincal vaccum mechanism) with sanding pad of approprite grit to make surface clean,free from dust,loose paint etc by skilled labour complete all as specified and directed.
M&L for waterproof cement based putty@ 1Kg (undiluted) per sq mtr of average thickness 1mm over the plastered/old painted wall after scraping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having vacuum mechanism) having RPM not less than 1500,sanding pad of 240 Grit or above to make the surface free from dust etc.by skilled labour as per following steps: Step1) Mix the putty powder by adding water as per manufacture instruction and mix it with putty mixer the mixing capacity of min 2.5 Kg putty per minute. Step2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minuts with a maximumpressure 3300 PSI.Allow6-8 hrs time to dry the putty surface. Step (3(a) The work pertaining to periodical services&water proffing shall be executed from authrized application through manufacture of which the materials i.e. Paint,distemper,putty etc. is proposed to be used by the contractor and approved by Garrisin Engineer. (b) Cost of scafolding upto 10mm hight of bulding is including in this item.
M&L for one coat acrylic water based exterior grade [email protected] (undiluted)/10sq mtr diluted with fully automatic airless spray machine of paint applaction with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete as as specified as directed.(Note (a) The work pertaining to periodical services&water proffing shall be executed from authorized applicator through manufacture of which the materials i.e Paint,Distemper,Puuty etc. is proposed to be used by the contractor and approved by Garrision Engineer. (b) Cost of scafolding upto 10mm hight of bulding is enclosed in this item.
M&L for two coat water based premum acrylic smooth exteriror emulsion of approved colour with silicon additive&colour stay Technology,Excellent Drit Pick up resistence with low VOC less than 50 gram/ltrs as per LEEDS specification.Anti algal properties in two [email protected] ltr (unditluted)/10 sqm diluted with water as per automatic airless spray machine of paint applaction with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete as as specified as directed.(Note (a) The work pertaining to periodical services&water proffing shall be executed from authorized applicator through manufacture of which the materials i.e Paint,Distemper,Puuty etc. is proposed to be used by the contractor and approved by Garrision Engineer. (b) Cost of scafolding upto 10mm hight of bulding is enclosed in this item.
Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/buzzer, bell push, lamp holders, regulators, sockets, light fittingsetc. removing materials from site and making good to the disturbed surfaces of walls, ceiling floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connecting to earth dolly, including PVC rectangular box for mounting switches/sockets/regulators etc. with 3mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed. Make: Richa/KEI/Polycab Make of caping/casing & PVC boxes: Prestoplast/finolex/Supreme/Richa
One light/Call bell point controlled by one, one way switch.
One Exh/Ceiling fan point controlled by one, one way switch.
One 3 pin socket outlet 5 Amps on the same board with other switches.
One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No 96.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch Piano, flush type single pole, one way 5 Amps complete all as specified and directed. Make:-Anchor/Legrand/Kinjal
M&L for Socket outlet, 2 in 1, 3 pin 5A flush typeMake:- Havells/Legrand/Anchor
M&L for Switch Socket combination, 2 in 1, 5 pin 5A flush typeMake:- Havells/Legrand/Anchor
M&L Switch socket combination 2 in 1, 5A/16A, 5 in 1 flush type. Make:- Havells/Legrand/Anchor
M&L for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc.Make:- Havells/Legrand/Achor
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and directed. Make:-Anchor/Legrand/Kinjal
M&L for replacement of Bell AC 230 volts musical type.Make:-Anchor/Legrand/Kinjal
M&L for replacement of bell push switch 5 amps piano type flush type Make:-Anchor/Legrand/Kinjal
M&L for 20 Watt LED, 4', Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed. Make : Havells/Bajaj/Philips/CG
Repair/Replacement for 20 Watt LED, 4', Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed. Make : Havells/Bajaj/Philips/CG
M&L for 10 Watt LED, 2', Wall mounted decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack complete all as specified and as directed. Make : Havells/Bajaj/Philips/CG
Repair/Replacement for 20 Watt LED 4' Tube with single/Double side connection suitable for batten light fitting incl taking down complete all as specified and directed Make : Havells/Bajaj/Philips/CG
Repair/Replacement for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings incl taking down old unsv light fitting. Make : Anchor/legrand/Havells make LED lamp :Havells/Bajaj/CG
Repair/Replacement for piano switch single pole 5A, one way complete all as specified and as directed. Make : Anchor/Legrand/Havells
Repair/Replacement for switch socket combination 6 Amps 5 pin , 230 volt flush type complete all as specified and directed. Make : Anchor/Legrand/Havells
Repair/Replacement for switch socket combination 16 Amps 5 pin 230 volt flush type complete all as complete all as specified and directed. Make : Anchor/Legrand/Havells
Repair/Replacement for socket outlet 5 pin 6A, 230 volt flush type complete all as specified and directed. Make : Anchor/Legrand/Havells
Repair/Replacement for fan regulator 100/120 watt step type AC 220 volt complete as complete all as specified and as directed. Make : Anchor/Legrand/Havells
Repair/Replacement for Lamp holder(Penta, Batten,Angle Type) PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
Supply and fixing for PVC switch board 8" x 6" suitable for switch socket complete all as specified and directed. Make : Richa/ ABB/ Presto Plast
All as per item No 117.00 PVC switch board 7"x4" . Make : Richa/ ABB/ Presto Plast
All as per item No 117.00 PVC switch board 4" x 4". Make : Richa/ ABB/ Presto Plast
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Richa/Finolex/Havells/RR Kabel Make of caping/casing :- Prestoplast/Finolex/supreme
M&L for replacement of 20 Watt LED security light fitting, drawn through including connecting up to from ceiling rose to the light fitting incl taking down old unsv light fitting complete all as specified and directed.Make :Havells/Bajaj/CG/Philips
M&L for decorative wall light fixture made up of polycarbonate including 9 watt LED lamp with B-22 base including taking down old UNSV complete all as specified and directed. Make : CG/Bajaj/Havells Cat No LHDL06160099
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down old unsv MCB DBs complete all as specified and as directed.Make:- Legrand/ ABB/Siemens
All as per item No 123.00 above but SPN 4 Way complete all as specified and as directed. Make:- Legrand/ABB/Siemens
Supply and fixing MCB TPN 40 to 100 Amps 415V 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and Commissioning incl taking down old unsv MCB complete all as specified and as directed. Make : Legrand/ABB/Siemens
M&L for Replacement of MCB SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand/ABB/Siemens
M&L for Replacement of MCB SP 6-32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning incl taking down old unsv MCB complete all as specified and as directed. Make:- Legrand/ABB/Siemens
M&L for 1.5 Sqmm wire x 2 Core PVC insulated sheathed copper flexible cable as per IS 694 Complete all as specified and directed.Make : Finolex/Richa/Havells
All as item No 128.00 above but in 2.5 Sqmm 2 core complete all as specified and directed. Make : Finolex/Richa/Havells
M&L for replacement of PVC casting & caping 25 x 12 mm complete all specified and as directed Make : Presto plast/Supreme/Richa
All as per item No 130.00 above but in 32 x 12 mm. Make : Presto plast/Supreme/Richa
Supply and fixing for flexible pipe size 20 mm (Colour : White/ Grey)
Supply and fixing for flexible pipe size 25 mm (Colour : White/ Grey)
M&L for hylem Sheet 10 x 8 inch switch board sheet complete all as specified and as directed.
All as per item No 134.00 but above 8 x 6 inch.
All as per item No 134.00 but above 7 x 4 inch.
All as per item No 134.00 but above 4 x 4 inch.
M/S Lucky Builders
P K ELECTRICAL
Shri B K Ukil
M/S SHANTI UDYOG
CHANDRADEO PRASAD
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .