PROVN OF 03 X TOILET BLOCKS NEAR OTM BLDG NO P-71, P-65 AND P-69 SMBK AND HARDSTANDING NEAR BLDG NO P-66 FOR RATION STORE AT ARTY CENTRE UNDER GE NASIK ROAD CAMP.

Amount

Excavating in trenches,n exc 1.5 m wide and n exc 1.5m in depth for foundation etc in any type of soils

M&L for PCC 1:4:8 Type D2 (40 mm graded aggregate)as in foundations,filling and mass concrete

M&L for reinforced cement concrete of M-20(Design Mix) 20 mm graded aggregate as in footings,foundation beams and plinth beams

All as per item No 3 above but as in columns

All as pe as Item no 3 above but as in beams

All as peas Item no 3 above but as in slabs supported on walls

M&L for Mild steel TMT bars of 10mm dia and over,cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as pe Item no-7 above but TMT bars of 5mm dia and over upto and including 10mm dia in stirrups,spacers and binders

M&L for formwork to sides of concrete foundations,footings and plinth beams for flat rough finished surfaces of concrete

M&L for formwork to soffits of suspended slabs such as roof slabs for flat rough finished surfaces of concrete

M&L for formwork to sides of soffits of floor or roof beams, cantilevers, lintels etc for flat rough finished surfaces of concrete

M&L for formwork to sides of pillars, columns for flat rough finished surfaces of concrete square,rectangular or polygonal

M & L for brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 with old size bricks.

M & L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 with old size bricks.

M&L for precast cement concrete louvres and jalies 25 mm thick Type B0 1:2:4 (12.5mm graded stone aggregate) set in CM 1:6 (measured solid) including all mouldings but excluding frame

M&L for rendering 15 mm thick cement plaster on other than fair faces of brick work or concrete surfaces in CM 1:4 and rendering is to be finished even and smooth without using extra cement adding water proofing compounder 3% by weight of cement (water proofing compound shall be measured and paid separately)

Supply of liquid water proofing compound

M&L for 10 mm thick rendering in CM 1:6 on brick work or concrete surfaces, finished even and smooth

M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube S&F in opening as per specification and drawing in SSR 2010 Part II

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing in SSR 2010 Part II.

M&L for 10 mm thick rendering in CM 1:4 on brick masonary wall and surfaces rough finished to receive tiles

M&L for white glazed ceramic tiles 300 x 200 x 7mm thick in vertical surface, set and jointed in neat cement slurry & pointed with coloured cement to match

M & L for moorum/ red bajri filling in floors or pavings,laid in layers n exc 15 cm thick, spread, levelled and rammed including watering

M & L for Hardcore of guage n exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to true surface

M&L for 75 mm thick cement concrete type B-1, 1:4:8 (20 mm graded aggregate) as in sub base

M & L for screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6.

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match

S &F Vitreous china bowl urinal flat back ,size of 465x355x265mm white (minimum),with grating and union for discharge pipe (excluding flushing cistern,flush pipe and waste pipe)

S&F waste coupling of 40 mm bore (half or full threaded) suitable for urinals

S&F waste pipe urinal & wash hand basin

S&F vitreous china wash basin, white ,flat back, size 450x300mm excluding taps, waste, chain and plug and porcelin stopper but including brackets.

S&F waste fittings, brass, chromium plated of 32 mm dia for wash basins

S&F pillar taps of 15 mm bore chromium plated screwed down high pressure with long screwed shanks and fly nuts

S&F PVC(SWR) floor trap of 100 mm dia outlet,plain with grating including jointing with solvent cement

S&F PVC(SWR) pipes 75mm single socketed in any length with rubber ring joints fixed to walls.

S&F PVC(SWR) bends of 75 mm bore

S&F Vitreous china squatting pan ,'Orissa' pattern, size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S&F PVC(SWR) 'P' trap of 125/110 mm bore

S&F PVC(SWR) bends of 110 mm bore

S&F PVC(SWR) junction single,(Single T) equal or unequal 110 mm bore

S&F PVC(SWR) vent cowl of 110 mm bore

S&F PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls of bore 110mm

S&F cold rolled stainless steel butt hinges 100 mm size medium weight complete all as specified and directed

S&F aluminium alloy barrel tower bolt 150 mm long

S&F 150 mm aluminium alloy handels cast/plate type

S& F Aluminium alloy, anodised, sliding door bolt 250 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F PVC connections 15mm size with PTMT nuts of length 300mm.

S&F stop valve, 15mm bore dia PTMT of any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and directed

S&F bib taps, fix cast copper alloy with crutch or butterfly handle, fancy type chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixing 15mm bore dia complete all as specified and directed.

S&F PVC valveless,symphonic action type,flushing cistern ,low level white,with inlet,ball valve,float and handle including brackets of 10 ltrs

S&F Ball brass valves, high pressure, with polythene float and flynut for 20 mm bore dia pipe complete,screwed for iron pipe or brass ferrule and fixed

S&F Gun metal,globe or gate valves,with iron wheel head,screwed both ends for iron pipe and fixed

Cutting exsisting steel tubing for alternation or addition of 25mm dia GI tubing in position without taking down

Screwing exsisting steel tubing for or addition of 25mm dia GI tubing in position without taking down

Drilling and tapping of exsisting CI water mains in position for branch connection of internal dia 25mm

S & F 15mm dia tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed :-

All as per item No 57 above but 20 mm dia

S&F 20 mm dia tubes medium grade, galvanized with iron all fittings fixed laid in treanches of sizes complete all as specified and directed :-

All as per item No 59 above but 25 mm dia

S & F rotational moulded poly-ethylene water storage tanks of1000 Ltrs capacity(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash.

M&L for preparing surfaces and applying three coats of white wash on new plastered surfacesof walls

M&L for preparing newly plastered surfaces of any descripion and applying 2 coats of cement base paint over a coat of primer complete all as specified and directed.

Returning , filling in, including spreading levelling, watering and well ramming in layers nexc 25 cm

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point

M&L for cement concrete 1:3:6 Type C1(20 mm graded aggregate) as in plinth protection finished smooth and even without using extra cement and providing bitumen filled joints as directed complete

M & L for reinforced concrete pipes class NP-2 and of dia 150mm laid and jointed complete with collars

M & L for PCC 1:2:4 type B1 (20mm graded stone aggregate) as in surface channels

Extra for forming fair finished drain or channel 30cm inner girth using extra cement incl forms, moulds, mitred/stopped ends etc.

M & L for providing precast RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc) chulla hoods, chajjas shelves and similar articles and set in CM 1:4 etc complete all as directed

Cutting into existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required.

M&L for rendering 10mm thiick in CM 1:3 on Roof slab, when the concrete is still green

M&L for waterproofing on roof including flashing and junction of parapet, kerb wall etc.as under (a)Applying bituminous primer on cleaned and dried surface @ 0.2kg/sqm (b) A coat of hot blown type bitumen of grade 85/25, applied hot @ of 2.25kg/Sqm. (c ) laying by thermo fusion ( torch applied ) 3 mm thick App based polymeric water proofing membrance weighing not less than 3.5kg/sqm and reinforced with polyster non voven fabric ( not less than 150 gms/Sqm 0 (d) Painting the exposed App membrane surface with bitumenous aluminium paint @ 0.15kg/Sqm.

Surface excavation n.exc 60cm deep and averaging 30cm deep and getting out in soft /loose soil

M&L for PCC 1:4:8 type D2 (Using 40 mm graded stone aggregate) 100mm thick as in sub base complete all as specified and directed by EIC.

M&L for PCC 1:2:4 type B1 (Using 20 mm graded stone aggregate) 50mm thick as in floors complete all a specified and directed by EIC. Note :- Necessary construction joints/Expansion joints/contraction joints to be provided as specified and rates for the same are included.

M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in hard standing/ plinth protections, finished even and smooth with using extra cement

E/M PORTION M & L for Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 32 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified for One light point controlled by one, one way switch MAKE OF CABLE - Standard / PLAZA / HAVELLS & MAKE OF PVC CASING/CAPING - PRICISION/PRESSFIT/MODI .Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.

All as per item No 80 above but One ceiling /exhaust fan point controlled by one switch and regulator

S &F Switch piano flush type single pole one way 5 amps.

S &F Ceiling rose, surface bakelite 65x50 mm three terminal

S &F Lamp holder insulated body with back plate for angle holder all as per specified Notes for Item Ser No 82 to 84 Make - Anchor / Standard / Havells / Polycab

S & F 1x 18 watt universal batten for T5 and T8 lamps as regal batten for LED tube. Make Havells Cat No: REGALBATTENT 8UPTO1X22WSSBSWH other then Eqvt Bajaj / CG

S & F Ultra bright glass 18W LED tubelight with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders as crystal glass LED Tubelight (Double Side Connection). Make Havells Cat No: CRYSTAL 1213T8DSTL18WLED865SGLASS other then Eqvt Bajaj CG

S & F energy saving and environmental friendly long life 1X15 Watt LED street/security light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistance of IK07, complete all as specified make- Havells Cat No-ENDURAPEARLSL15WLED757SASYTOPC or eqvt in Bajaj/C&S

Fabrication,supply & fixing of GI pipe bracket up to 40 mm dia- 0.9m long & 2 set of clamps made out of 30x5mm ms flat & fixed with anchor bolt suitable for 1x15 w LED security light fitting

Supply & fix Exhaust fan 450 mm sweep heavy duty including 3 core copper cable & cutting holes if required etc. Make - Havells Cat Part No-Turbojet SP 1400 RPM or eqvt in Bajaj / Usha.

S & F MCB DB made of sheet steel, powder painted with bus bar 200 A, neutral link, earth bar and Din rail , 240 Volts SPN with 4 way Double door IP-43-IK09 protection grade, Make - L&T/ LEGRAND /HPL/ equivalent of ABB Note For Item No 90 - (1). The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall. / DB tobe fixed on wall including frame made out of MS flat 40x5mm (2).The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface (3) MAKE OF DB & MCB - LEGRAND/HPL/ABB/L&T/HAVELLS (4) (note - rate is inclusive of cutting chases & flush to wall & making good to the disturbed surfaces of walls etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes making good disturbed surfaces of walls, etc )

S&F MCB, single pole and neutral, 240 Volts , 6-32 Amps all as specified and as directed. Make : Havells / Legrand / Philips

S&F MCB singal pole 240 Volts , 6 to 32 Amps all as specified and as directed. Make : Havells/Legrand/Philips

M & L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in gound (Earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and earht strip protected by provision of GI light grade pipe 15 mm light grade bore including provision of pit in PCC (1:2:4) type B-1 using 20 mm graded of stone aggregate with PCC cover including 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal (not less than 40 Kgs, 80 Kgs each) filling with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electircal plate No 03 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion.

M & L for bricks; common burnt clay building bricks, sub-class ‘B’ Designation 75

M&L for sand filling under floors or in foundations including watering and consolidation

Supply laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sq. mm 2 core.

S&F GI water tubing 32mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed and laid in trenches complete all as specified and as directed by Engr-in-Charge.

SHILPVED

UNITED ENTERPRISES

M/S MK Nair

SVT ENGINEERS AND CONTRACTOR.

M/S K. K. Construction

M/s. SHRI SAINATH ENTERPRISES

M/S SAMEER SUBHASH PATANI

Bidder Name

M/S SAMEER SUBHASH PATANI

SVT ENGINEERS AND CONTRACTOR.

M/S K. K. Construction

UNITED ENTERPRISES

M/S MK Nair

Vinod Enterprises

SHILPVED

M/s. SHRI SAINATH ENTERPRISES