SPL REPAIR TO BLDG NO 517 (01 TO 08) OF 16 DOGRA AND SPL REP/REPLACEMENT OF ROOF FALSE CEILING AND TILES OF DRONA ARMS SIMULATOR AT ITARANA UNDER AGE B/R-II ALWAR

Amount

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store

Refixing old steel tubing and connection in new or old position (walls,ceiling,floor etc) bore of pipe in 15mm dia.

S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

Refixing old steel tubing and connection in new or old position (walls,ceiling,floor etc) bore of pipe in 20mm dia.

S&F steel tubing medium grade 20mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F in repair rotational moulded polyethylene water storage tanks (white colour) (cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position incl all necessary fittings (nipple, socket, union etc) complete all as specified in SSR Part I and removing to store with and including 20mm bore float valve with rod and ball complete all as specified and directed.

S&F in repair 20mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs vitreous china squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests connection to trap and to flushing pipe, etc. complete including making good to floor complete all as specified & directed

S&F in repair vitreous china corner wash hand basin of Size 550mm x 435mm/400mm x 450mm excluding taps waste chain plug stopper but including brackets, waste pipe cutting pinning in ends of brackets complete all as specified and directed. Make : CERA/JAQUAR/HINDWARE

S&F in repair PVC flushing cistern low level 10 ltr capacity with inlet ball valve float and handle syphonic action type including brackets and flush pipe of polythene of low or high density. Make ; JAQUAR/CERA/HINDWARE

S&F in repair PVC connection of 15mm bore with 2 Nos. PTMT nuts, 600mm long fixed with adapter and washers at both the ends complete all as specified and as directed

S&F in repair towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed

S&F in repair brass chromium plated towel ring including a pair of CP brass bracket complete all as specified and directed

S&F in repair Floor Drainer with Collar and Cockroach Trap/Jali with or without waste hole all as specified and directed

S&F in repair brass chromium plated soap dish, complete all as specified.

S&F in repair 15mm dia bore cast copper alloy chromium plated fancy type pillar tap with out cold & hot water complete all specified and as directed. Make : JAQUAR Cat part No CON-021KN or equivalent of CERA/HINDWARE

S&F in repair 32 mm dia PVC flexible waste pipe for WHB/Sink 600 mm long with PVC coupling complete all specified and as directed

S&F in repair over head shower (fancy type) chromium plated 100mm round shape single flow (ABS body) with or without swivel joints, , including fixing to steel pipe or union all as specified and directed. Make : JAQUAR Cat part No OHS-1989

S&F in repair CP brass mixer for Wall mixer hot & cold water for screwed down for iron pipe and fixed bore of pipe in 15 mm complete all specified and as directed. Make :JAQUAR cat part No CON-219KN or equivalent

S&F in repair stainless steel plate rack made out of 1.00 mm thick sheet of size 900 mm x 750 mm and depth of shelves 230 mm with partition for small /large plates made out of stainless steel 24 gauge all as per sample to be hanged on wall with the help of steel screws drilled in walls with rawl plug, design as approved by GE.

S&F in repair sink without drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing in granite bowl size 410mm x 330mm x160 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed complete all as specified & as directed.

M&L pressed steel shutter 1mm thick including pressed steel frame of 1.25 mm thick sheet, 12mm dia MS rod for locking, two nos chromium plated handle and one mortise pattern lock inclu two coats of spary painting over a coat of shop primer complete all as shown on drg no TD/2004/29 sheet no 1/3 to 3/3 complete all as specified & as directed.

S&F in repair mild steel, chromium plated curtain15mm dia bore rod with fixing bracket, stops, rollers etc complete all as specified and directed.

S&F in repair Stainless Steel drapery rod of 25 mm inner dia (in length as directed ) of approved colour with & including matching finials at both ends and pair of SS brackets fixed at both ends with PVC rawl plug & steel screws on walls/beams including PVC curtain rings of matching colour @10 cm c/c all as specified and directed

S&F in repair 15 mm bore fancy type long body bib tap with wall flange chromium plated with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, complete all as specified & as directed.JAQUAR Cat part No CON-107KN or equivalent of CERA/HINDWARE

S&F in repair 15 mm bore fancy type short body bib tap with wall flange, chromium plated with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, complete all as specified & as directed.JAQUAR Cat part No CON-047KN or equivalent of CERA/HINDWARE

S&F in repair Stop valves/angle cock bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make : JAQUAR Cat part No CON-053KN or equivalent of CERA/HINDWARE

S&F in repair 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed. Make : JAQUAR Cat part No CON-083FTK or equivalent of CERA/HINDWARE

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed

M&L rendering 15mm thick in CM (1:6) on other than fair faces of brick/stone masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L 15 mm thick rendering on fair faces of brick/stone masonary in CM (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick in CM (1:3) on concrete surfaces in ceiling, soffits and the likes; finished even & smooth without using extra cement complete all as specified.

M&L rough cast plaster on exterior walls applying the under coat of cement and sand mortar (1:3) not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed

M&L preparing newly plastered surfaces & applying two coats of oil emulsion distemper (OBD) over with and including 1mm thick wall care putty complete all as specified and directed

Complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salt, trading oil grease spots etc using grinding machine on wall surfaces and preparation of old plastered wall surfaces and applying two coats of oil emulsion distemper ( OBD) of approved shed/tint over and including a coat of white wall care putty 1mm thick and over a coat of primer complete all as specified and directed.

M&L preparation of newly plastered surface of wall and applying two coat of water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint over a coat of primer complete all as specified and directed. Make - Nerolac Excel Top guard (10 years product warranty)/ Asian Paints Ultima Protek (10 years product warranty)/ Berger weather coat long life 10 (10 years product warranty) at any height including necessary scaffolding.

M&L preparation of old surfaces of walls and applying one coat of white wash

M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash

M&L writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm height with thick synthetic enamel paint complete all as specified and as directed

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc. 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete (reinforced) in landing slab, chullah hoods, manhole covers, roofs, floors, beams, stair case, landing, chajja and similar suspended work complete all as specified and as directed.

Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and directed

M&L Non Skid Coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including 15mm thick screed bed in CM (1:6) complete all as specified.

M&L vitrified double charged ceramic tiles 600mm x 600mm x 8-10mm thick (square/ rectangular), polished, coloured set and jointed set and jointed in neat cement slurry as in floors and pointed in white or coloured cement to match the shade of tiles over with and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L vitrified double charged ceramic tiles 600mm x 600mm x 8-10mm thick (square/ rectangular), polished, coloured set and jointed set and jointed in neat cement slurry as in skirting and dados and pointed in white or coloured cement to match the shade of tiles over with and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L 12mm thick vitrified exterior grade textured finished tiles (ENDURA JOHNSON OR EQUIVALENT HEAVY DUTY TILES of any size 400mm x 400mm /300mm x 300mm set and jointed in net cement slurry, pointed with admixture of white/colour cement and pigment as in floors/pavings with and including 20mm thick screed bed in CM (1:4) complete all as specified and directed

M&L 12mm thick vitrified exterior grade textured finished tiles (ENDURA JOHNSON OR EQUIVALENT HEAVY DUTY TILES of any size 400mm x 400mm /300mm x 300mm set and jointed in net cement slurry, pointed with admixture of white/colour cement and pigment as in skirting/dados/vertical surfaces with and including 10mm thick rendering in CM (1:4) complete all as specified and directed

M&L 50 mm thick PCC(1:3:6), Type C1 (using 20mm graded stone aggregate ) as in plinth protection finished fair and even, path laid in panel surface finished even and fair using extra cement and joints of panel shall be filled by bitumenous primer complete all as specified & directed.

M&L glazed coloured ceramic tiles in vertical surface 300mm x 600mm x 7 mm thick laid over with and including 10 mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified & directed.

M&L machine cut Green Marble 15-18 mm thick as in riser of steps, skirting, dado and pillar set over with and including 10 mm rendering in CM (1:4) and jointed with grey cement slurry mixed with pigments to match the shade including rubbing and polishing complete all as specified and directed.

M&L 15-18 mm thick Granite(of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and the likes; in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over with and including 15 mm thick screed bed or bedding layer in CM (1:3), including grinding of edges to curved surface finish complete all as specified and directed.

M&L 75 mm thick PCC (1:4:8), Type D-2 (using 40 mm graded stone aggregate) as in sub base of floor/pavings complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified & directed

M&L PCC (1:4:8), Type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified & directed

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified & directed

Taking down Chowkats or frames with shutters ( without taking off shutters from the frame) n.exc. 1.5 Sqm each & removing to store complete all as specified and as directed.

Taking down Chowkats or frames with shutters ( without taking off shutters from the frame exc 1.5 Sqm but n.exc 4 Sqm each & removing to store complete all as specified and as directed.

S&F factory made moulded PVC door shutter 28-30mm thick (style) with 2,4,or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face & 2 mm plain colour prelaminated PVC sheet on the back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain finish PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F SS sliding door bolt with hasp, staple (bolt type) 300mm long not less than 12mm dia with and including minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 150 mm long SS barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 200 mm long SS barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F 125 mm size SS handle fabricated type anodized and fixed complete all as specified and directed

S&F 150 mm size SS handle fabricated type anodized and fixed complete all as specified and directed

S&F MS Retractable Hinge fixed to wooden or steel frames with Screws/welding as required at site complete all as specified & directed

S&F mild steel butt hinges medium weight colod rolled of size 100mm, ISI marked complete all as specified & directed

S&F in repair extruded aluminium alloy with galvanised mild steel hing pin butt hinges 100mm long

S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,with vulcanised rubber piece fixed to floor complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

S&F Mild steel hand rails, half round or other stock section or core drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolt posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fasteners and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F mild steel framed work as in door frames for gates & section for gauge/fly proof shutters made of angle or hollow/square /rectangular/circular section and other covering door to be prepared for handing or sliding with including either hooks , praporsonaly made sliding door bolt , hinges or handles fittings (exclusIve of steel or othr covering, running rails and guides) and hanging also fastening and fixing , necessary arrangements for fixing of wiremesh, necessary bolting including welding comlete conforming to FE-290 Gde E-165. Wire gauge will be measured and paid separately

S&F framed work such as grills, grating etc, with ends of bars shouldered &/or riveted or forged into spikes, framed guard bars, barred iron door ladder, framed balusters, walk ways, railing, frame work for water tanks & similar work conforming to Fe-290 Gde E-165.

S&F welded steel wire febric n.exc 4kg/Sqm complete to wood or steel membrane with and inluding taking out old wire febric of any description complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

S&F powder coated aluminium door anodised of approved colour ( size of frame : 63.5mx38.10mmx2mm thick & size of shutter : door vertical (style ) with gasket of size 46.3mmx45.00mmx 1.50mm thick, top rail of size 47.00mmx45.00mmx1.30mm lock rail/middle rail 83.00mmx44.50mmx1.65mm thick bottom rail 114.3mmx45.00mmx1.50mm thick including S&F of 4.8 mm thick sheet glass with glazing clip, PVC track gasket, EPDM rubber gasket on glass of weather tightening alongwith recessed type handle, hinges, mortice lock, door closer complete all as specified as per TD -2004/61R sheet No 1/1

S&F Aluminium windows made of 1.59mm thick powder coated (thickness of powder coating not less than 50 micron) as per aluminium section of size given below .Aluminium window will be of double shutter of glass/ wire gauge shutters including all necessary accessories jointing cleats , glazing clips, rubber neoprene packing, for fixing glass/ wire gauge, aluminium handles and tower bolt 2 Nos 100 mm ‘D’ Type in each door, 2 Nos 100 mm aluminium hinges including necessary steel screws complete all as specified and directed by Engr The size of different aluminium section to be used is as under (a) Outer Frame 125X45X2.00 mm thick (b)shutter frame section size 44X44X1.59 mm thick for glass and 44x25x1.59mm for wire gauge Note: Rates quoted are inclusive all fittings and fixtures. Glass and wire gauge & MS grill will be paid separately in respective items.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

S&F sheet glass, ordinary quality 4.80 mm thick fixed with rubber beading and clips size of glass n.exc 2 sqm in each pane complete all as spd & directed.

M&L PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) for 100 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete all as specified and directed

Excavation in trenches n.exc. 1.5 Mtr wide and n.exc. 1.5 Mtr in depth for foundation and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material, n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and directed.

Cutting Chases exc 10 cm but n.exc 20cm in girth in brick/stone wall for fixing of PVC Pipe/GI pipe of 15 & 20 mm bore (concealed in wall) including making good disturbed surface in CM (1:4) and to match with the existing surfaces complete all as specified and directed.

Cutting holes into stone wall built in cement mortar or cement lime mortar for inserting hold fast and making good dismental portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n.exc one brick as required complete all as specified and directed.

M&L cutting holes in stone /RCC/granite slab for inserting coocking gas cylinder pipe and making good complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan to any radius built in CM (1:4) as in half brick thick wall complete all as specified and as directed.

M&L 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in floors/levelling course etc complete all as specified and directed.

M&L PCC (1:2:4), type B-1 (using 20mm graded stone aggregate) as in landing, cover slabs (for manholes etc) chajjas, water troughs, mangers, shelves and similar article with plain faces complete all as specified and directed.

Providing PCC (1:2:4), type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamferred on edges complete all as specified and directed.

M&L PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in cills, coping steps, tank staging, sesmic and other similar courses, lacing courses parapet and railing upto 60cm height kneeler kerb and the likes; including weathering, slightly rounded or chamferred angle and throating complete all as specified and directed.

M&L mild steel (TMT bar)10mm dia and over cut to length bent to shape reqd, incl, cranking benching spirally for hooping for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9 mm dia.

M&L mild steel (TMT bar) 6mm to 8mm dia and over cut to length bent to shape reqd, incl, cranking benching spirally for hooping for columns hooking ends and bending with and including MS wire annealed wire not less than 0.9 mm dia as in stirrups, spacers, binders etc.

M&L cutting into existing manholes / Septic tank for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 100mm bore pipe.

S&F UPVC (SWR) pipes of 75 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe with and including taking out old unserviceable pipe PVC/CI pipe with fittings complete all as specified and directed.

S&F UPVC (SWR) pipes of 110 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 110mm pipe with and including taking out old unserviceable pipe PVC/CI pipe with fittings complete all as specified and directed.

S&F UPVC (SWR) pipes of 75 mm bore single socketed in any length fixed to wall with and including taking out old unserviceable PVC/CI pipe with fittings complete all as specified and directed.

S&F UPVC (SWR) pipes of 110 mm bore single socketed in any length fixed to wall with and including taking out old unserviceable PVC/CI pipe with fittings complete all as specified and directed.

S&F in repair 75 mm dia UPVC (SWR) floor trap, plain with grating including joining with solvent cement complete all as specified and directed

S&F in repair 75 mm dia UPVC (SWR) bends of any radius complete all as specified and directed

S&F in repair 110 mm dia UPVC (SWR) bends of any radius complete all as specified and directed

S&F in repair 75 mm dia UPVC (SWR) bends of any radius with access door complete all as specified and directed

S&F in repair 110 mm dia UPVC (SWR) bends of any radius with access door complete all as specified and directed

S&F in repair 110 mm dia UPVC (SWR) branch piece single (singe T) equal or unequal with access door complete all as specified and directed

S&F in repair 110 mm dia UPVC (SWR) branch piece single (double T) equal or unequal with access door complete all as specified and directed

S&F in repair 75 mm dia UPVC (SWR) branch piece single (singe T) equal or unequal with access door complete all as specified and directed

S&F in repair 110 mm dia UPVC (SWR) vent cowl complete all as specified and directed

S&F Pipe Supporting Clamping - for GI pipe 2 Nos for 15mm and 2 Nos for 20mm down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 10" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 3" - 2 Nos. 2. Continuous Slotted C Channel of Size 10" - 1 No.; 3. U Bolt R/M for 3" (75 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2" Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102. Make: Shaivi or equivalent as approved by GE. complete all as specified and directed

S&F Pipe Supporting Clamping - Single Pipe of dia 3" (75 mm) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 10" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 3" - 2 Nos. 2. Continuous Slotted C Channel of Size 10" - 1 No.; 3. U Bolt R/M for 3" (75 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2" Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102. Make: Shaivi or equivalent as approved by GE. complete all as specified and directed

S&F Pipe Supporting Clamping - Single Pipe of dia 4" (110 mm) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 10" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 3" - 2 Nos. 2. Continuous Slotted C Channel of Size 10" - 1 No.; 3. U Bolt R/M for 4" (110 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2" Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102. Make: Shaivi or equivalent as approved by GE.

M&L taking down and removal of loose / disintegrated old concrete up to 50mm depth/ plaster and cleaning all loose dust washing with water and epoxy bondsmaterilas of pidilite/Dr fixit with new cement plaster /polymer modified plaster/concrete /screed concrete wth old surface etc complete all as specified and directed.

M&L applying 15mm thick plaster with polymer modified mortar in proportion 1:3 by weight 5 litres SBR 45 to added to 50kg cement with 13 litre water addition finished surface to match with existing adjoining surface of ceiling, beams and alike complete all as specified and directed. Make : Nitobond/Fosroc/Dr fixit

M&L applying two coats of 2 component zinc based epoxy rust preventer on corroded reinforcement after cleaning and removing the rust from corroded reinforcement with the help of wire brush and treating it with rust remover (Reebaklens RR) including thoroughly cleaning washing air blowing brushing etc complete. Note : Qty of zinc based epoxy rust prevent or only shall be taken into account for payment purpose on the basis of actual consumption.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65X100mm mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardanand fixed in position with MS hold fast/ugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid forseparately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Demolition and breaking up drain pipes (Salt glazed stone ware, AC, or Reinforced concrete) or 100mm dia set in cement mortar including PCC bed to drain pipe, packing under & haunching against the sides of drain pipes complete all as specified & directed

S&F 75mm thick steel fibre reinforced concrete (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape complete all as specified & as directed.

M&L 150mm bore reinforced concrete pipe, class NP2, laid and jointed in CM (1:1) complete with collars including demolition and breaking up old existing pipe all as specified & as directed.

Treatment of sunken portion as per following courses :- (a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion including vertical wall surface complete as directed. (b) Maintain the Sunken to a slope of 1:40 outward with 32mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall. (c) Top of the sunken floor slabs shall be laid to a slope 1:40. The surface of RCC slab shall be made even and smooth by using extra cement while the concrete is still green. Concave fillet in PCC (1:2:4) type B0 of radius 75 mm shall be provided at the junctions of RCC slab and adjoining walls. (d) Floor and side walls upto the finished floor level shall be plastered with 15 mm thick CM (1:4) mixed with water proofing compound @ 3% by weight of cement. Over plastered surfaces, a layer of APP based polymeric membrane not less than 3mm thick, weighing not less than 3 kg per sqm, reinforced with polyster non- woven fabric (weighing not less than 150 gm per square metre) shall be laid by torch application. Side overlaps shall be 100mm and the ends laps shall be 150 mm and overlap joints shall also be sealed by torch application. (e) The sunken portion shall be filled with lean cement concrete (1:5:10), type E2 using 40 mm brick aggregate after carrying out satisfactory testing of CI pipes / joints and slabs / walls by filling water for 72 hours. The sunken portion of Nahani / floor trap and pipe joints shall be embedded in PCC (1:3:6) blocks. (f) 32 mm dia GI spout shall be provided to drain out leakage, if any.

Dismantling wall and any type of ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness fixed to any type of frame including cover fillets complete all as specified and directed.

Dismantling AC/CGI/Fibre sheet (Corrugated, Semi corrugated etc) as in rooof etc complete all as as specified and directed.

Raking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses complete all as specified and directed

Taking down carefully existing bitumen tarfelt including plaster of any description over the surfaces of roof, terraces including flashing and junction of parapets/curve walls etc and removing off the rubbish and deposting where directed complete all as specified and directed

M&L 15mm thick screed bed on fair faces of concrete/brick surfaces in CM (1:4) with water proofing compound @ 200ml per bag of cement even and smooth in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane finished complete all as specified. Note : Polymeric membrane and WPC shall be meausred and paid seperately here-in-after)

Supply only liquid water profing compound as per IS-2645.

M&L water proofing treatment to RCC roof slab including parapet comprising of following course of treatement/specified from bottom to top (a) Applying Bituminous primer @ 0.40 Ltr per sqm over plastered surfaces of roof including parapet surfaces. (b) Over the priming coat laying one layer APP based polymeric membrane of approved manufacturer, 3 mm thick weight not less 3.6 Kgs/Sqm and upper side of membrane thermally insulated with white mineral gravel finish, uniformly embedded during manufacturing process shall only be used, it shall be laid by torch application, side overlap should be 75mm and at ends shall be 100mm. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside parapet in groove, the same shall be finished by a membrane flashing.

M&L providing and applying 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface incuding any sunk/raised mouling as per design approved by GE over metal frame and including reinforced with GI wire mesh complete all as specified and directed. Note : The unit rate shall deemed to be inclusive of necessary GI wire mesh with necessary fixing clips etc complete

M&L Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediatechannel with connecting clips across the intermediatechannel at 457 mm centre to centre.

M&L wall panelling made of 5 mm thick prelaminated PVC hollow section with tonge and groove joints fixed on wall with necessary screw and adhesive complete all as specified and directed by Engr-in-charge . PVC U channel will be provied on top and bottom and PVC angle will be provided in all corners consisting of 5mm thick wood grain printed PVC sheet inclusive of solvant cement and fixing at site on wall as per specification and drawings complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F plain galvanized mild steel sheeting 0.50mm thick in plain ridges, hips, valley gutters, drip and strep flashings ( length and girth as fixed) with grade of zinc coating 135 complete all as specified and directed.

M&L 50mm thick sand stone slab in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc n.exc 2mtr in length, punched dressed on face and along exposed edges, self faced on the other Side and set and pointed in CM (1:4) complete all as specified and directed.

S&F factory made kitchen cabinet of size 1.5M x 0.60M x 0.3M, made out of 18mm thick PVC celuka sheet having density not less than 650kg/cum one side decorative lamination & other side balancing lamination sheet consisting of carcase18 mm thick PVC sheet including shutters made out of 18 mm thick PVC board all required brackets 5.5 screwes etc. The panels shall be fabricated using adhesive and screws where every required. All edge shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification mentioned as per drawing and specification approved by Engineer-in-Charge. Note : (i) PVC celuka sheet manufactured by an ISO 9001-2015 certified company, termite proof, water proof & flame retradant PVC sheet. (ii) PVC cabinet of required size fabricated by joining four 18mm thick PVC celuka ply fixed with each other using solvent cement adhesive and screws and 18mm thick PVC sheet as backing of cabinet screw and solvent cement adhesive etc (iii) The Cabinet box will be devided into two equal part with two leaf shutter and one shelf will be placed in cabinate(iii) Cabinate will be fixed in wall with 4x fastners etc and necessary fixing lugs (iv) Each shutter will be provided with SS handle 75 mm, CP Piano hinges, magnet/catcher (v)The quoted rates are included the rates of all fittings and fixtures and dismantling and taking down old kitchen cabinet of any type complete all as specified and directed.

Taking down carefully copper/Aluminium point wiring for light/fan/socket/light fitting/power point and taking down of teak wood batten / PVC casing caping/PVC conduit/steel conduit and making good disturbed surfaces of walls/ceilings /floors etc with and including dismantling of fittings complete all as specified and directed.

M&L point wiring complete with 1.5 Sqmm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 Volts grade confirming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20 mm external dia) but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part-I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling including 1.5 mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakellite white/coloured top sheet cover 3.0 mm thick for one light point controlled by one way switch all as specified & directed.

All as per serial item No. 139.00 here-in-before but for one fan point controlled by one switch and regulator

All as per serial item No. 139.00 here-in-before but for one exhaust fan point controlled by one switch and regulator

All as per serial item No. 139.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

All as per serial item No. 139.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No. 139.00 here-in-before but for one bell/buzzer point controlled by one bell push

All as per serial item No. 139.00 here-in-before but for one light point controlled by two, two way switch

All as per serial item No. 139.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.

S&F switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts

S&F switch piano, flush type, single pole, two way, 5 Amp, 230 Volts

S&F switch piano, flush type, single pole, one way, 15 Amp, 230 Volts

S&F bell push flush type 5 Amps, 240 Volts

S&F bell/buzzer, AC 230 volts, single pole, ISI marked

S&F socket outlet, 3 pin (with 2 pin outlet also), 5/6 Amps, flush type, 240 Volts, ISI marked.

S&F socket outlet, 2 in 1, 3 pin, 5/15 Amps flush type multipurpose with fuse & neon indicator, 240 volts, ISI marked.

S&F ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified.

S&F decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 16 to 20W with LED tube of model E-LITE LED pride and connecting up, complete all as specified and directed.Make : Havells cat part No. LHEXBHP71N1W018 or equivalent of philips/Crompton Greaves/ bajaj/Wipro/GE

S&F LED type street-DRACO SERIES light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LED complete all as directed. Make: C&S Cat Part no. LTESS20WLED or equvalent Crompton Greaves /Wipro

S&F LED ceiling light 40 watt, 220 Volts, AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.

S&F LED Bulb energy saving 10/11 W complete all as specified and directed Make :- Havells/Crompton/Syska

S&F sheet metal enclosures double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar, 8 way, 240 Volts.

S&F MCB 63 Amp TPN, three pole & neutral, 415 Volt complete all as specified & directed.

S&F MCB 32/40 Amp, single pole & neutral,240 Volt complete all as specified & directed.

S&F MCB 6-40 Amp, single pole 240 Volt complete all as specified & directed.

S&F Sheet metal enclousure double door type ,suitable for fixing TPN with 200 Amps rated bus bar ,vertical DB 4 way TPN 415 Volts complete all as specified & directed. Make : Havells/Phillips/Bajaj

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 16 Sqmm 2 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid separately under relevant items.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 25 Sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid separately under relevant items.

M&L brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.

M&L dry sand and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

S&F in repair 40mm dia GI pipe, Light grade for protection of LT cable fixed to walls/ poles/road crossing including clamps complete all as specified and directed.

S&F exhaust fan AC single phase 230/240 Volts of size 300 mm sweep with louver with and including cutting holes in brick/stone wall of required size carefully with and including taking out old exhaust fan of any description and making good the disturbed surfaces to match with the existing in CM (1:3) complete all as specified and directed.

S&F 25mm bore GI water tubing IS-1239 marked, medium grade, in replacement including all necessary pipe fittings laid in trenches, on wall, under floor, under road on same or new route and making good the disturbed portion to match with the existing with and including taking down of old unserviciable pipe complete all as specified and directed. Note :-Excavation and earth work will be measured and paid separately under relevant items.

S&F in repair 25mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F sub main wiring on and including passing through PVC conduit pipe 1100 Volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 with and including taking down existing unserviceable sub main wiring. (Note: Two runs of cable with one run of earth wire and one run of PVC Coundit should measured as one length)

Disconnecting from electric connection and taking down carefully the existing electric energy meter of any capacity, any make , any size and depositing the same to the store yard of AGE E/M Alwar and refixing the old serviceable electric energy meter inside mter box including electric connection complete all as specified and directed.

Disconnecting from electric connection and taking down carefully the existing ceiling fan/exhaust fan/Geyser of any capacity, any make , any size and depositing the same to the store yard of AGE E/M Alwar and refixing the old serviceable ceiling fan/exhaust fan/Geyser including electric connection complete all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed.

shiva construction (BID ID -3151886)

M/S JINDAL ENTERPRISES (BID ID -3152635)

M/s S Amarjit Singh (BID ID -3155147)