REPAIR TO BATHROOM/TOILET BLOCKS OF VARIOUS WARD/DEPARTMENT AT CH (CC) UNDER GE (E/M) LUCKNOW

Amount

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n.exc 1.50 Sqm and removing from sites complete all as specified and directed.

Taking down shutter only n.exc 1.0 sqm each complete all as specified and directed.

Taking down shutter only exc 1.0 sqm but n.exc 2.00 sqm each complete all as specified and directed.

All as item No 01 above but exc 1.5 Sqm but n.exc 4 Sqm Each complete all as specified and directed.

S&F 2nd class Hard wood in plain, solid, straight chowkats and frames wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned joints complete all as specified and directed.

S&F Bands, straps, clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.

M&L PCC 1:3:6 type C1 using 20 mm graded stone aggregate for fixing of hold fast and making good complete all as specified and directed.

S&F solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tubes, as per specifications& drawing complete as directed by Engineer-In-Charge.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS, supplying and fixing in frame at site as per specification and drawings shown in section 8 of SSR part -II complete all as specified and directed.

M&L 30 mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23 (b) complete all as specified and directed.

S&F 100 mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed.

S&F 75 mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed.

S&F 150 mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified and directed.

S&F Aluminium alloy, anodized, sliding door bolt (ISI Marked) of 300mm with hasp & staple (Bolt type) and fixing clips of sheets, coat or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repair 100 mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed.

S&F in repair 75 mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed.

S&F in repair 150 mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed.

S&F in repair 100 mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed.

S&F in repair 150 mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repair 100 mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repair Aluminium alloy, anodized, sliding door bolt (ISI Marked) of 300 mm with hasp & staple (Bolt type) and fixing clips of sheets, coat or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F wooden flush doors 35-40 mm thick of approved make complete all as specified and directed.

M&L Preparation of new wooden surface exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F 2nd class hardwood Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc., and removing old beads to Store complete all as specified and directed.

S&F aluminium alloy wire cloth, 0.45 mm nominal dia of wire and averaging width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F in repair aluminium alloy wire cloth, 0.45 mm nominal dia of wire and averaging width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

Hacking out old broken glass panes of any thickness, size ,quality or description from wooden frames , glazed with putty or fixed with beads in repairs complete all as specified and directed.

S&F glass pan ordinary quality 3 mm thick and glazing with oil putty/ wooden beads in square n. exc 0.5 m each pane complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) rubbish off the premises complete all as specified and directed.

M&L non-skid coloured ceremic tiles 300 x 300 x 7 mm in flooring and including 15 mm thick screed bed of cement mortar (1:6) including pointing in coloured cement to match the shade of tiles set & jointed in neat cement slurry complete all as specified and directed.

M & L for glazed ceramic tiles in vertical surfaces 350 mm x 250 mm x 7 mm / 450 mm x 350 mm x 7 mm (thick) set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 10 mm thick screed in cement mortar 1:3 complete all as specified and directed. (Note : Screed bed will not be measured and paid separately)

M & L for 18-20 mm thick machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing , polishing and 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L for 18-20 mm thick machine cut kota stone slab as in skirting/riser over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing , polishing and 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for Non skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour and including 15 mm thick screed bed of cement mortar (1:6) including pointing complete all as specified and as directed .(Note : Screed bed will not be measured and paid separately)

M&L for 18-20 mm thick granite stone slab ( Black colour) , bedded over screed bed and jointed in cement mortar to match the colour of slab as in flooring , polishing and grinding and including 15 mm thick screed bed of cement mortar (1:6) including pointing complete all as specified and directed. (Note : Screed bed will not be measured and paid separately)

S&F 6 mm thick hollow polycarbonates sheet as in roofing including fixing clips etc complete all as specified and as directed.

M&L in repairs hand shower including fitting to 15 mm bore GI pipes complete all as specified and as directed.

M&L in repairs over shower including fitting to 15 mm bore GI pipes complete all as specified and as directed.

M&L in repairs shower arms including fitting to 15 mm bore GI pipes complete all as specified and as directed.

M&L in repairs shower pannels thermostatic mixer chrome with 3 adjustable vertical jets for massaging the neck, waist and thigh including fitting to 15mm bore GI pipes complete all as specified and as directed.

M&L in repairs EWC with flushing cistern seat covering including fixing complete all as specified and as directed.

M&L in repairs Wash hand basin of complete all as specified and as directed.

S& F in repairs 15 mm dia single lever wall mixer with provision of Hand shower but without hand shower complete all as specified and as directed.

S&F in repairs 15 mm Bib cock with wall flange complete all as specified and as directed.

S&F in repairs 15 mm two way Bib cock with wall flange complete all as specified and as directed.

S&F in repairs 15 mm Angular stop cock with wall flange complete all as specified and as directed.

S&F in repairs 15 mm Pillar cock with 200mm extension complete all as specified and as directed.

M&L in repairs central hole basin Mixer without pop up waste system with 450 mm long braided hoses including fitting to 15mm bore GI pipes complete all as specified and as directed.

M&L in repairs single towel rail 600 mm long complete all as specified and as directed.

M&L in repairs soap dish including fitting to 15 mm bore GI pipes complete all as specified and as directed.

S&F in repair power coated anodised Aluminium alloy sections sliding windows shutters with frames comprising Series -C (20 mm), 2 track sliding shutters duly fitted with neoprene beading, glazing clips,locking device, heat absorbing glass 4.8 mm nominal thicknes complete all as specified and as directed

S&F in repair Powder coated Aluminium sections ( conforming to IS) door frames with double leaf shutters complete duly fitted with neosprene rubber beading,heat absorbing glass panes 4.8 mm nominal thickness, Alu anodised with rubber shoe floor door stoppers- 2 Nos, 100mm aluminium hinges 4 Nos per shutter, Handle 2 Nos in each shutter, Aluminium tower 1 Nos in each shutter and necessary locking arrangement with mortice lock with duplicate key complete all as specified and as directed.

S&F in repair Powder coated Aluminium sections ( conforming to IS) door frames with single leaf shutters complete duly fitted with neosprene rubber beading,heat absorbing glass panes 4.8 mm nominal thickness, Alu anodised with rubber shoe floor door stoppers- 1 Nos, 100 mm aluminium hinges 4 Nos per shutter, Handle 2 Nos in each shutter Aluminium tower 1 Nos in each shutter and necessary locking arrangement with mortice lock with duplicate key complete all as specified and as directed.

S&F Aluminium grill 6 mm dia not less than 4 Kg per sqm fixed with frame in windows/ventilator complete all as specified and as directed.

M&L for 30 mm thick PCC 1:2:4 type B-0 using (12.5 mm graded stone aggregate ) as in sunken floor mixed water proofing compound finished surface even and smooth with using extra cement complete all as specified and directed. Note : Water proofing compound shall be measured & paid separately.

Rendering 15 mm thick cement plaster in cement mortar 1:3 as in brick/concrete surface of sunken portion using water proofing compound complete all as specified and directed. Note : Water proofing compound shall be measured & paid separately.

M&L for wire brushing and cleaning top surface of cement concrete including flashings and junction of parapet etc. and surface painting with a layers of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq.m. blinded with grit or as per size of gravel @ 0.006 cu.m. per sqm and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and directed.

M&L Cement concrete 1:5:10 type E2 using 40 mm graded stone aggregate as in sunken floor, foundations, filling and mass-concrete finished surface fair and even complete all as specified and directed.

Taking down cement plaster or cement lime plastering , any descriptuon from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

All as per item no 62 above but on ceiling surfaces complete all as specified and directed.

Material and labour for 15 mm thick rendering in CM (1:6 ) on other than fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick on ceiling in cement mortar 1:3 finished fair and even without using extra cement complete all as specified and directed.

M&L applying three coat of white wash on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified and directed.

M&L applying three coat of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed.

Taking up or down steel tubing and connections, 15 mm bore and removing from site complete all as specified and directed.

Taking up or down steel tubing and connections, 20 mm bore and removing from site complete all as specified and directed.

Supply and fixing of steel water tubes medium grade, galvanised with all fittings 15 mm bore fixed complete to concilled in walls and ceiling or laid in floors complete all as specified and directed.

Supply and fixing of steel water tubes medium grade, galvanised with all fittings 20 mm bore fixed complete to walls and ceiling or laid in floors trenches complete all as specified and directed.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)15 mm nominal bore complete all as specified ( Note:- Refixing means including taking down existing pipes and fittings. However, new Galvanised mild steel pipe fittings if required shall be measured and paid separately)

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.) 20 mm nominal bore complete all as specified ( Note:- Refixing means including taking down existing pipes and fittings. However, new Galvanised mild steel pipe fittings if required shall be measured and paid separately)

S&F in repair 20 mm dia unplasticised PVC pipes of pressure rating 10 kgf/cm2 with all fittings and fixed complete to walls and ceilings or laid in floors of pipe complete all as specified and directed.

S&F in repair 15mm dia unplasticised PVC pipes of pressure tating 10 kgf/cm2 with all fittings and fixed complete to walls and ceilings or laid in floors of pipe complete all as specified and directed.

S&F in repair 15 mm dia bib tap cast copper alloy(fency type), chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs stop valve, cast copper alloy, fancy type,chromium plated screwed down both ends for high pressure, as per ISI suitable for 15mm dia iron pipe complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size with swivel joints, suitable for 15mm dia GI pipe complete all as specified and directed.

S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with internal fitting, push button operated type with and including bracket, PVC flush pipe etc complete all as specified and directed.

S&F CI 'P' or 'S' trap of 100mm size complete all as specified and directed.

S&F in repairs vitreous china urinals, flat back of size 465mmX355mmX265mm, white with grating and union for discharge pipe complete all as specified and directed.

S&F in repair vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, but excluding waste pipe complete all as specified and directed.

S&F 32mm dia waste pipe of polythelene,flexible, for wash hand basin or urinals complete all as specified and directed.

S&F waste coupling of PTMT (half or full threaded) for 32/40mm dia complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts, of 450mm length complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified. complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

All as per Item No. 89 above but with access door complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

All as per Item No. 93 above but with access door complete all as specified and directed.

M & L for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F stack clamps made out from 50 mm x 5 mm size flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to walls or roof for 100 mm bore of pipe etc complete all as specified and directed.

Taking down cement plaster brick/stone wall, ceiling/facia (as in patch work) etc including racking out joint, hacking for key, scrubbing down with water complete including M&L for rendering plaster 10 mm thick in cement mortar 1:3 on concrete surface of wall/ceiling/facia including one bonding coat with pedilite chemical and making good to match the adjecent surface complete all as specified and directed.

Dismantling PVC water tanks any capacity and removing to store complete all as specified and directed.

Supply and fixing of rotational moulded polyethylene water storage tanks 500 litre capacity, white colour, triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Supply and fixing of rotational moulded polyethylene water storage tanks 1000 litre capacity, white colour, triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F 20 mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC OHT tanks complete all as specified and directed.

S&F 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to 20 mm dia GI tube complete all as specified and directed.

M&L Plain Cement Concrete Type B-0, 1:2:4 (using 12.50 mm graded stone aggregate), 25 mm thick as in sub-base of floors complete all as specified and directed.

Demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6.0 m mean radius built in cement sand mortar 1:6 complete all as specified and directed .

M&L Half Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6.0 m mean radius built in cement sand mortar 1:6 complete all as specified and directed .

M&L for Providing precast cement concrete with type B0 PCC 1:2:4 (using 12.5 mm graded stone aggregate) set in cement sand mortar 1:4 louvres and jallies, 35 mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed.

M&L for RCC M-25 Nominal Mix using 20 mm gradded stone aggregate in slabs supported on walls, beams and columns in floor,roof,landing etc complete all as specified and directed.

M&L Form work to soffits of suspended slabs such as roof slabs floor slabs, landing and similar work for fair finished surface complete all as specified and directed.

M&L for form work to edges of concrete flats, treads, break in floors, window cills, horizental or sloping and similar exc 10 cm but not exceeding 20 cm wide for fair finished surface complete all as specified and directed.

S&F mild steel TMT bars 8 mm dia and over ,cut to length , bent to shape requred, including cranking , bending spirally for columns hooking for columns hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down existing water proofing membrance and cleaning roof, plastered surface etc preparing the surface to receive plaster by brushing with wire brush and fanning the surface to remove all loose dirt etc and brushing neat cement slurry @ 3.00 Kg/Sqm complete all as specified and directed.

M&L for rendering plaster 10mm thick in cement sand mortar 1:4 with water proofing compound @ 3 % by the weight of cement without using extra cement over roof surface complete all as specified and directed. Note : WPC shall be measured and paid seperately.

M&L for water proofing treatment to roof surface complete all as specified and directed with the followings :- (a) Apply bituminious based primer confirming to IS : 3384-1965 @ 0.50 kg/sqm (b) Apply APP modified polymeric membrane of weight not less than 3.2 to 3.6 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm shall be sealed/fused by flame torch aplication as per manufactureer instructions. (c) Aplying bituminious based aluminium paint @ 0.20 Kgs/Sqm in two coats over APP membrane

All as per item no 115 above but on vertical surface over a coat of hot bitumen 85/25 grade @ 1.0 kg/sqm complete all as specified & directed.

Supply only water proofing compoud complete all as specified and directed.

Construction of septic tank for 50 users, excavation in ordinary soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC slab covers in M-25 including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc., complete all as specified and directed as per drawing No. CELZ TD-217 Sheet No 1/2 & 2/2. Note:- Depth of septic tank shall be the effective depth i.e, below invert level of sewage line at well complete all as specified and directed

Construction of soakage well of size 1.8M dia X 3.00M deep, excavation in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25 / RR masonry / Filling with brick bats, complete all as specified and directed as per drawing No CELZ TD-576 Sheet No 1/2 & 2/2. Note:- Depth of soak well shall be the effective depth i.e, below invert level of sewage line at well complete all as specified and directed

M&L for 150 mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in cement mortar 1:1 and tested complete all as specified and directed.

M&L for concrete bed for 150 mm bore pipe in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) to drain pipes including packing under, haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation bed of manhole, mass concrete etc complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in surface channels, drain channel, drain benching complete all as specified & directed.

Extra for forming fair finishing drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitered /stopped ends etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on external surfaces of walls or on stone masonry & chajja/roof/ceiling mixed, facia surface mixed with water proofing compound as per manufacturer's instruction surface finished even and smooth without using extra cement complete all as specified and directed.(WPC shall be measured and paid seperat).

Supply only water proofing compound, ISI marked complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 as in coping (20 mm graded aggregate) including necessary form work complete all as specified and directed.

M&L for precast secemt concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover set in cement mortar 1:4 complete all as specified and directed.

M&L 60 mm thick PCC intrelocking tiles (rubber laminated finish ) of size and shape as approved , laid dry on sand not less than 40 mm thick, interstices filled in floors/ pathway complete all as specified and directed.( Sand cushion shall not be measured and paid seperately.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping,padding and bed block, wall through and the like including weathering slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for all forming branch channel (1/2) round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast manhole / septic tanks covers including necessary form work and setting in CM 1:4 complete all as specified and directed.

Excavation in trenches n.exc 1.5m deep & n.exc1.5m wide on plan in ordinary soft/loose soil and getting out complete all as specified and directed.

M&L Burnt bricks work with whole kiln burnt well burnt old size bricks of compressive strength not less than 35 kg per sqcm built in CM 1:6 in walls straight on plan/ exceeding 6 mtrs mean radius complete all as specified and directed.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in drains/ surface channels, complete all as specified and directed.

M&L Precast RCC 1:2:4 type b1 using (20mm graded stone aggregate as cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and similar works etc. set in cement mortar 1:4 complete all as specified and directed.

S&F TMT HYSD reinforcement bars 10 mm dia and over incl all cutting bending binding cranking placing & binding with MS wire (annelead) not less than 0.9mm dia complete all as specified and directed.

M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate as in bed of drain pipes of 200 mm bore dia incl packing under & haunching against the sides of pipes after they are laid & tested, complete all as specified and directed.

M&L Salt glazed stoneware drain (SGSW) pipe grade 'A' 200 mm dia, laid in trenches & jointed in CM 1:1 complete all as specified and directed.

Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in soft/ loose soil complete all as specified and directed.

Removing excavated material ( soils) etc. exceeding 250 m and and not exceeding 500 m depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L Chequered cement concrete tiles size 300 x 300 x 25mm thick with white cement & pigment set, jointed and pointed in neat cement slurry including 20mm thick screed bed in cement mortar 1.6 in floor complete all as specified and directed.

M&L cement concrete type 1:3:6 type C1 using 20 mm graded stone aggregate filling around hume pipe and mass concrete complete all as specified and directed.

Hume pipe class NP2 of 150 mm dia laid and jointed with collars complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm in steel window clips and wooden beading in wooden joinery complete all as specified and directed.

S&F in repairs Chromium plated fancy long body Bib taps with cup , cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs Chromium plated ,Concealed stop cock Reduced body ISI Marked, , cast copper alloy, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed.

S&F in repair CP Angle stop cock ( one way) long thread with wall flange , fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed.

S&F in repairs Pillar taps, fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed.

S&F in repairs PTMT( Polytetra Methyllene Terephthalate) Bib taps suitable for 15 mm bore pipe standard of PTMT any colour screwed, for iron pipe and fixed ( Minimum weight 15 mm-90 gms complete all as specified and directed.

S&F in repairs CP Angle stop cock ( two way) long thread with wall flange , screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed..

S&F in repairs CP mild steel gratings suitable for 75/100 mm dia NT/ FT complete all as specified and directed.

S&F in repairs Chromium plated Brass Tubular towel rod, of 24" (60 cm long) complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan ( padestal pattern Water Closet Cat No.20012, white) , ( excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe, etc, complete all as specified and directed.

Supply and fixing in repairs Plastic water closet seat, white, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F Neosprene rubber beading including taking down old rubber beading as in aluminium window and door shutter complete all as specified and directed.

Supply & fixing in repair double action floor spring hydraulically regu-lated made up of minimum 1.25 mm thick aluminium alloy sheet foun-dation box,main body with stainless steel cover, governing pivot made of mild steel heavy duty fixed complete all as specified and directed.

S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 2 , universal type , suitable for door shutters 701 to 850 mm in width and of weight between 36 to 60 Kg and fixed complete all as specified and directed.

S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size complete all as specified and directed.

S&F in repair for Aluminium Anodised window, ventilator fixed type shutter, aluminium section weighing 0.55 Kg/m incl necessary joining cleats, glazing clips rubber neoprene packing , Handle 2 Nos in each door, hinges, anodised aluminium snap beading screw complete all as specified and directed.

S&F in repair for Aluminium Anodised door shutters, aluminium section weighing 0.55 Kg/m incl necessary joining cleats, glazing clips rubber neoprene packing , Handle 2 Nos in each door, hinges, anodised aluminium snap beading screw complete all as specified and directed.

S &F in repair aluminium partition with pre-laminated particle board at bottom panel and 5.5.mm thick glass on top panel incl glazing clip and neosprene rubber beading complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Providing and fixing of E-board 'Everest' make 600x600x4mm thick white prelaminated seif embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24 mm wide T-section/Angle section complete all as specified and directed.

M&L Suspended ceiling, comprising 12.5 mm thick reinforced gypsum plaster boards Conforming to IS-2095 , GI perimeter channels, intermdiate channels, etc. including finishing the exposed surfaces with Oil bound distemper two coats complete all as specified and directed.

Repairing of existing aluminium door single leaf including oiling and greasing of floor springs,replecing of rubber beading if required,replacement of hinges,handle,towerbolt of any size any type present at site on required basis,also including replacement of any membre of aluminium section i.e frame & shutters membre and 5-12 mm glass and making the door and shutter serviceable complete all as specified.(Floor door springs where renewed shall be measured and paid separately under appropriate complete all as specified and directed.

Repairing of existing toughend glass door single leaf including oiling and greasing of floor springs,replacement of hinges,handle,lock of any size any type present at site on required basis,also including replacement of any membre of aluminium section i.e frame & shutters membre and 12 mm glass and making the door and shutter serviceable complete all as specified and directed. (Floor door springs where renewed shall not be measured & paid seperately it includes the rate of floor spring also)

Repairing of existing aluminium door double leaf including oiling and greasing of floor springs,replecing of rubber beading if required,replacement of hinges,handle,towerbolt of any size any type present at site on required basis,also including replacement of any membre of aluminium section i.e frame & shutters membre and 5-12 mm glass and making the door and shutter serviceable complete all as specified and directed. (Floor door springs where renewed shall be measured and paid separately under appropriate

S&F for M S work as in Hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and countersunk for balusters, nosing to steps including embeding in concrete and securing bolts for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc fillets including all necessary drilling bolting or reveting etc and similar work conforming Fe-290 Gde E-165 complete all as specified and directed.

S&F for M S work as Framed works such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes,framed guard bars barred iron doors ladders, framed balusters walk ways railing, framed work of water tanks, framed and hung as gates including pintle hinges, stops, hand made sliding sliding bolts etccomplete all as specified and directed.

S&F Expanded metal, cut to length , bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia.or fixing with galvanised steel staples supplied and fixed complete to wood or steel members (not exc 4 Kg/sqm) complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated etc) sheets including ridges in roof covering complete all as specified and directed.

M & L for 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with `L' type or `J' type hooks or cranked hook bolts complete all as specified and directed.

M & L for asbestos cement two plece serrated ridge for corrugated or semi corrugated sheets fixed with `L' type or `J' type hooks or cranked hook bolts complete all as specified & directed .

S&F in 0.50 mm Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting made to any shape or Semi-ciruclar any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 2 mm thick fibre glass reinforced transclucent corrugated sheeting with two corrugations side lap fixed with L type or J- type or cranked hook bolts and washers in roof, wall etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F steel work in tubular trusses/posts including special washers etc complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St-240 complete all as specified and directed.

M&L for preparing surfaces, plastered or unplastered new surfaces of ceiling and applying three coats white wash complete all as specified and directed.

M&L Preparation of newly plastered or unplastered surfaces of walls by brooming down and priming plastered and other surfaces with cement paint primer ( before application of cement base paint) including two coats of cement base paint complete all as specified and directed.

M&L for complete removal existing treatment and distempering walls with two coats of cement base paint white or tinted over a coat primer on wall sufaces.Incl a coat of 2mm thick wall care putty complete all as specified and directed.

M&L for complete removal existing treatment incl preparing unplastered old surfaced and distempering walls with two coats of oil bound distemper white or tinted over a coat primer on wall sufaces.Incl a coat of 2mm thick wall care putty complete all as specified and directed.

Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M&L applying one coat of white wash on old decorated surfaces of ceilings including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of cement base paint of any tint/shade complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of distemper oil emulsion of any tint/shade complete all as specified and directed.

Preparation of old plastered or unplastered surfaces of ceilings by washing, rubbing down & stopping etc, and applying one coat of distemper oil emulsion of any tint/shade complete all as specified and directed.

M & L preparation of old brick, stone, concrete, AC or decorated plastered surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed

M&L applying one coats of Apex ( Asian Paint) / Weather coat (Berger) over old painted surface including preparation of wall surface complete all as specified and directed .

Preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed .

Preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint complete all as specified and directed

Pumping out of water / liquid / sludge or any other waste/materials stagnated in septic tank / soak wells and discharge the same to nallah / drains through hose pipe or by other means upto distance of 250 mtr complete all as specified and directed.

Cleaning of sewage line any dia including affected manholes and disposal of waste materials / spoils upto a distance of 50 mtrs by any means (mechanical / manual) including washing out manhole and sewage line and disposal of waste / sludge in pits complete all as specified and directed.

Temporarily blocking of inlet of septic tanks/manhole with suitable wooden plugs/gunny bags and pumping/bailing out effluent and taking out/removing the accumulated sludge soil sewage/any other foreign/foul materials etc (solid/semisolid) from the septic tanks/manholes. complete and cleaning the septic tank/manholes with water by mechanically/manually including taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed . (NOTE: Depth of manhole/SOAK WELL/SEPTIC TANK exc 0.5 to 1.5M from below GL)

Temporarily blocking of inlet of septic tanks/manhole with suitable wooden plugs/gunny bags and pumping/bailing out effluent and taking out/removing the accumulated sludge soil sewage/any other foreign/foul materials etc (solid/semisolid) from the septic tanks/manholes. complete and cleaning the septic tank/manholes with water by mechanically/manually including taking out the blocking arrangements of inlet and making the system functional all complete all as specified and directed . (NOTE: Depth of manhole/SOAK WELL/SEPTIC TANK exc 1.50M to 4.50M from below GL)

Temporarily blocking of sewage line 150 mm bore with suitable wooden plugs/gunny bags and cleaning the same by rod-ding and removing the sludge alongwith brick bats/stones/broken bottles/any other foreign materials etc complete and cleaning the sewage line with water by mannually/mechanilly as directed by Engineer-In-Charge and taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed .

Temporarily blocking of sewage line 200 mm bore with suitable wooden plugs/gunny bags and cleaning the same by rod-ding and removing the sludge alongwith brick bats/stones/broken bottles/any other foreign materials etc complete and cleaning the sewage line with water by mannually/mechanilly as directed by Engineer-In-Charge and taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed .

Temporarily blocking of sewage line 300 mm bore with suitable wooden plugs/gunny bags and cleaning the same by rod-ding and removing the sludge alongwith brick bats/stones/broken bottles/any other foreign materials etc complete and cleaning the sewage line with water by mannually/mechanilly as directed by Engineer-In-Charge and taking out the blocking arrangements of inlet and making the system functional complete all as specified and directed .

Cast iron pipes with spigot and socket ends centrifugally cast. class LA, in any length,supplied and laid and fixed in RCC Flush Out Tanks complete all as specified and directed .

Taking down copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or taking credit and making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one switch.

Supply and fixing switch piano flush type, single pole, one way, 05 Amps complete all as specified and directed.

Supply and fix ceiling rose, 3 phase / PVC / polycarbonate, isolated body complete all as specified directed.

All as per Serial Item No 202 here-in-before but one 3 pin socket outlet, 15 Amps, independent with cable 2.5 Sq mm size complete all as specified and directed.

Supply and fixing switch piano flush type, single pole, one way, 16/20 Amps complete all as specified and directed.

Supply and and fixing switch socket combination 2 in 1, 3 pin, 05 and 15 Amps, flush type, universal complete all as specified and directed.

S & F epoxy powder coated distribution box double door type , SPN , 4 way with 100 Amps rated bus bar, 240 volts, for MCBs , grouted flush to walls with IP 43 and metal door complete all as specified and directed.

S & F MCB SP, 6 to 32 Amps, 240 Volts to be housed in DBs proper and suitable size cable lugs to be fixed with MCBs are included in unit rate of each MCB complete all as specified and directed .

S&F MCB SPN/Isolator single pole and neutral link, 240 V, 40 amps to be housed in DBs proper and suitable size cable lugs to be fixed with MCBs are included in unit rate of each complete all as specified. complete all as specified & directed.

Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

M&L PVC flexible 3 core copper conductor FRLS cable 1.5 sqmm suitable for connecting CFL light fittings 2X36/3X36 watts or FTL fittings of any type complete all as specified & directed.

Taking down old unserviceable FTL fitting including tube light rod any watt and Supply and fixing of energy effecient LED tube light rod with fittings 20 Watt, four feet long retro bar professional WH 5700K/CW 6500K and single side connection ultra bright ,glass shell ,glare free ,wide angle ,single side ,prewired including connecting of size 23/.0076 of required length from ceiling rose to the tube light fitting complete all as specified and directed.

Supply, fixing and connecting mirror light fitting 18 watt (cool white), with anti glare surface complete all as specified and directed.

Supply, fixing,connecting and testing energy saving LED security light fitting 45 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired on existing street light poles and bracket complete all as specified and directed.

Taking down existing exhaust fan any size and shape and kept in safe custody and refixing the same including servicing of exhaust fan and making connections in existing place complete all as specified & directed.

Taking down existing electric operated geysers any size and capacity and kept in safe custody and refixing in existing place complete all as specified & directed.

M/s Vimal Traders

M/s JP Constructions

m/s raghubar dayal