Construction of Warehouse 2000 MT and Machinery Shed 310 Sq. Mtr.

Excavation for FOUNDATION in EARTH, SOIL OF ALL TYPES, SAND, GRAVEL and SOFT MURUM, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means.

Excavation FOR FOUNDATION IN HARD MURUM including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means.

Providing SOLING using 80 mm. size trap metal in 15 cm. layer including filling voids with Crushed sand / grit, ramming, watering etc. complete.

Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap / granite / quartzite / gneiss metal for FOUNDATION and BEDDING including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate

Providing and laying in situ / Ready Mix M-20 cement concrete of trap / granite / quartzite / gneiss metal for APPROACH SLAB / RIGID PAVMENT including compacting, finishing, curing etc complete (excluding reinforcement) (with reversible drum type mixer / concrete batch mix plant (pan mixer) with SCADA with fine aggregates of required specification (Natural sand / VSI sand finely washed etc.) cement 6.40 bags/cumt)

Filling in PLINTH and FLOORS with APPROVED EXCAVATED MATERIAL in 15 cm. to 20 cm. Layers including watering and compacting etc. complete.

Filling IN PLINTH and FLOORS with CONTRACTOR's MATERIAL / brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.

Providing PRECONSTRUCTIONAL ANTITERMITE TREATMENT as per I.S. 6313 (Part-II) by treating THE TOP SURFACE OF PLINTH FILLING at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per One Square Metre of surface area covering ten years guarantee on bond paper.

Providing and laying in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. work in FOUNDATIONS like RAFT, STRIP FOUNDATIONS, GRILLAGE and FOOTINGS of R.C.C. COLUMNS and STEEL STANCHIONS etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. BEAMS and LINTELS as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ / Ready Mixcement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. CHAJJA as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing second class BURNT BRICK MASONRY with conventional/ I.S. type bricks in cement mortar 1:6 in FOUNDATIONS and PLINTH of inner walls / in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

Providing second class BURNT BRICK MASONRY with conventional/ I.S. type bricks in cement mortar 1:6 in SUPERSTRUCTURE including striking joints, raking out joints, watering and scaffolding etc. Complete.

Providing and fixing ROLLING SHUTTER fabricated from STEEL LATHS of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear)

Providing and fixing STEEL VENTILATOR FULLY GLAZED PARTLY FIXED as per detailed drawing WITHOUT HOT DIP ZINC COATING including fabricating glazing with plain / obscured glass panes 5 mm thick and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete.

Providing and laying in situ CEMENT CONCRETE M-20 with TREMIX TREATMENT for 100 mm. thickness FOR FLOORING with groove cutting of 4 mm. wide and 20 mm. deep with necessary refilling with bitumen etc. complete.

Providing INTERNAL CEMENT PLASTER 12 mm. thick in SINGLE COAT in cement mortar 1:4 WITHOUT NEERU FINISH to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Providing INTERNAL CEMENT PLASTER 20 mm. thick in SINGLE COATS in cement mortar 1:4 WITHOUT NEERU FINISH to concrete, brick surface, in all positions including scaffolding and curing etc.complete.

Providing and laying POLISHED SHAHABAD STONE SLABS 20 to 25 mm. thick FOR TREADS and RISERS of STEPS and STAIRCASES, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.

Providing and fabricating STRUCTURAL STEEL WORK in rolled sections like JOISTS, CHANNELS, ANGLES, TEES etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) PROFILED SHEETS for ROOFING. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180- 250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile4.52 Kilogram/ One Square Metre)

Providing and fixing PLAIN ZINC SHEETING of 0.80 mm. thick (22 B.W.G.) over the RIDGE HIP or VALLEY to GALVANISED IRON SHEET ROOFING including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.).

Providing and fixing CORRUGATED GALVANISED 870.00 IRON SHEETS of 0.63 mm. thick (24 B.W.G.) for ROOFING without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5

Providing and fixing 6 mm thick ISI mark Asbestos Cement RIDGE CAPPING for ROOFING including galvanised iron hooks, bolts, galvanised iron and bituminous washers, galvanised iron clamps, bolts, nuts including scaffolding etc. complete.

Providing and fixing 12 mm dia. MILD STEEL BAR upto 0.5 M. length for ANCHOR RODS with necessary threading nuts and bolts etc. complete.

Providing and fixing P.V.C. RAIN WATER PIPES of 110 mm. outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Providing and applying TWO COATS of WATER PROOF CEMENT PAINT of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary,cleaning and preparing the surface,watering for two days etc.complete.

ize 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge

Providing and applying TWO COATS of EXTERIOR WEATHER SHIELD PAINT of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface ,applying primer coat, scaffolding if necessary and watering the surface for two days etc complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary.

PROVIDING, LAYING, SPREADING and COMPACTION STONE AGGREGATES of specific sizes to WATER BOUND MACADAM SPECIFICATION including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. BY MECHANICAL MEANS - Grading-I (Using Screening Type A (13.2) mm Aggregate)

PROVIDING, LAYING, SPREADING and COMPACTION STONE AGGREGATES of specific sizes to WATER BOUND MACADAM SPECIFICATION including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with VIBRATORY ROLLER to the required density. BY MECHANICAL MEANS - Grading-II (Using Screening Type B (11.2 mm) Aggregate)

Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates)

Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates)

Providing and applying TACK COAT on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates)

Providing bituminous Type-A LIQUID SEAL COAT on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG 30 bulk bitumen rates are considered to arrive at rates)

Add for Royalty Charges (For Sand After 01/07/2021).

Making trench in Hard murum/Tar road having 0.75m depth and minimum 0.3m width for laying provided cables up to voltage level 1.1kV cable complete as per specification no. CW-EXN-CTR

point

Wiring for plug on board with switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification no. WGPW/CW