Providing Special repair works for existing 1No.of SFO and 30Nos.of Firemen quarters at Perambalur in Perambalur District

Clean removal of Cement plaster from the old wall and without affecting the adjacent structures

Dismantling clearing away and carefully stacking materials useful for reuse of Pressed Tiles and Weathering Course without affecting the adjacent structures

Weathering course with concrete broken brick jelly 20mm gauge in pure burnt lime stone slaked and screened (No Sand) over RCC Roof Slab

Plastering with C.M. 1:5 with Admixture 12mm thick

Terrace water proofing work: The existing pressed tiles surface to cleaning water wash using with wire brush, the tiles joints are rack out using machine without damaging the existing structure and clean the joint.

Finishing top of roof with one course of hydraulic pressed tiles of approved superior quality of size 23cm x 23cm x 20mm tk laid over weathering course in CM 1:3 with Admixture 12mm thick

Supplying and fixing of 4 mm thick pin headed Glass Panels with aluminium anodized U shape beeding

Supplying and fixing of Indian Water Closet White Glazed (Oriya type) of size 580mm x 440mm of approved make with ISI mark (Other than Ground Floor)

Clearing the Light Jungle in the work site including labour charges for cutting and cleaning the site

Open wiring with Run off main with 2 wires of 1.5 Sqmm Copper PVC insulated unsheathed single core 1.1k.v cable wire

Open wiring with Run off main with 2 wires of 2.5 Sqmm Copper PVC insulated unsheathed single core 1.1k.v cable wire

Open wiring with Run off main with 2 wires of 4.0 Sqmm Copper PVC insulated unsheathed single core 1.1k.v cable wire

Supplying and fixing of Calling Bell / Buzzer 6mm suitable for AC / DC and Push Bell

Supplying & fixing of Battern Type Bakelite Holder for Lamp with ISI Mark

Supplying & fixing of Ceiling Rose with ISI Mark

Supplying and fixing of 5 Amps flush type two way switchs (Staircase switch)

Supply and fixing of 5 Amps 3 Pin Flush Type Wall Socket

Supplying and fixing of 5 Amps flush type switch including cost of switch

Supplying and fixing of 15 Amps 3 Pin Flush Type Plug socket using on a suitable 150mm PVC Electrical Box (Fire retarded Box)

Supplying and fixing 40 Amps Earth Leakage Circuit Breaker 30 milli amps sensitive 6 KA breaking capacity with ISI marked single phase unit (IS 12640)for incoming 2 nos 6 amps single pole 'B' series

Supplying and fixing of 1 No. of Three Phase Distribution Board with 4 way per Phase 30A Per way with Neutral link

Supply and delivery of following Electric Ceiling fan with ISI mark (a) 48" Electric fan 1200mm sweep

Charges for assembling and fixing of Ceiling Fan of Different Sweep (Excluding Cost of Fan)

Supply, delivery and fixing of cuddappah slab sink of size 600mm x 600mm x 200mm thick 32mm dia 'B' class GI waste water pipe and 32mm dia C.P waste coupling

Supplying and fixing of 9 Watts LED Bulb of best quality

Supplying and fixing of 4' 18 Watts Crystal LED Tube light

Supplying and fixing of Water tight bulk head fitting with Guard suitable for 12W LED Bulb

Supplying and fixing of 12 Watts LED Bulb of best quality

Supplying and fixing of 25 Watts LED Street Light fitting with LED arrangements

Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992 type "B" for soil line with relevant specials (a) 110mm dia PVC SWR Pipe including all required PVC Specials etc., all complete.,

(b) 75mm dia PVC SWR Pipe including all required PVC Specials etc., all complete.,

Supplying, laying, fixing and jointing the following dia PVC Pipes as per ASTM D-1785 of schedule 40 (a) 32mm dia ASTM-D schedule 40 threaded PVC Pipe with necessary PVC/GI Specials

(b) 25mm dia ASTM-D schedule 40 threaded PVC Pipe with necessary PVC/GI Specials

Supplying and laying and jointing the following dia Non Pressure Pipe of SN-8 SDR 34 (S 16.5) as per IS -15328 /2003 , Superior variety a) 110mm dia UPVC Non Pressure Pipe

b) 160mm dia UPVC Non Pressure Pipe

Painting the old wood work with two coats of approved First class synthetic enamel paint including thorough scrapping

Painting the old iron work with Two coats and other similar works with approved First class synthetic enamel paint including thorough scrapping

Painting the old inner walls with two coats of Oil Bound Distemper including through scrapping over the priming coat of white cement over old wall surfaces including cost of white cement paint, oil bound distember paint

Painting the old outer walls with Two Coats of approved best Ready mixed Exterior Emulsion paint in addition to one coat of approved primer coat over old wall surfaces, including thorough scrapping

Supplying and fixing of Indian Water Closet White Glazed (Oriya type) of size 580mm x 440mm of approved make with ISI mark.In Ground Floor ('P' & 'S' Trap) (size 580 x 440mm).

Supplying and fixing EWC (Europen Water Closet) (White) Superior Variety 500mm with PVC SWR grade "P" or "S" Trap

Supplying and fixing of Half Turn Brass core CP Long Body Tap of 15mm dia of Best quality

Supplying and fixing of Half Turn Brass core CP Short Body Tap of 15mm dia of Best quality

White washing Two coats for existing surface using clean slacked shell lime

Removing the existing doors and windows shutter and refixing with 2 Nos of Door handle with CP screws 6", new 3 Nos 5" Alu butt hinges , 2 Nos of 6" x 1/2"Tower bolt ,1 No. of 10" x 5/8" Aldrop, 1No.of Nylon Bush and 1 No of Aluminium Door stopper with rubber bush

Supplying and fixing of Aluminium Door Stopper with Rubber Bush with required screws

Supplying and fabricating and fixing in position of Buzbar box of size 40"x12"x9" in 16 gauge CR Sheet with copper Buzbar arrangements for Single Phase 1 No. of 1"x11/4" phase 1 No. of metal 1"x1/8" neutral to locut and 12 Nos. of 32 Amps fuse unit

Supplying and Fabricating and fixing in Position of electrical control panel board Buzbar box of size 40"x12"x9" in 16 gauge CR Sheet with copper Buzbar arrangements for Single Phase 1 No. of 1"x11/4" phase 1 No. of metal 1"x1/8" neutral to locut and 6 Nos. of 32 Amps fuse unit

Supplying and laying of 3.5 core 25 sq.mm PVC armoured aluminium LTUG cable on wall and post. (Above ground level)

Supplying and delivery of brass cable gland suitable for 3.5 core 25Sq.mm PVC armoured aluminium LTUG cable with earth strip

Supplying and providing cable end termination for 3.5 Core of 25Sqmm PVC Armoured ALTUG Cable with necessary aluminium cable sockets by crimping

Providing and fixing factory made unplasticized polyvinyl chloride (UPVC) Door Frame of size 50X47mm with a wall thickness of 5mm, made out extruded 5mm rigid UPVC foam sheet, mitred at two corners and joined with 2 nos of 150mm long brackets of 15X15mm M.S square tube.

Supplying and fixing of single leaf door shutters by using Best Indian T.W. door shutters with 9mm thick phenol bonded BWR grade plywood as per IS 303-1989 (General) with IS 5539-1969 (for preservative treatment) and IS 848-1974 (for adhesives) with relevant IS specifications a) 900x2100mm (Single leaf - 9mm thick BWR grade plywood door shutter)

Supplying and fixing of 6 Amps to 32 Amps 10KA single pole MCB (Lower End)

Dismantling clearing away and carefully stacking materials useful for reuse of Reinforced Cement Concrete by manual / by using deploying machineries without affecting the adjacent structures

Supplying and fixing of Aluminium 150mm long Handles "D" type of Best quality

Supplying and fixing of PVC 3mm thick Hylem sheet

Providing Two legged Scaffolding using 15Cm dia casurina props using country wood planks (a)10.50m height in addition of 2.5m height.

Supplying and fixing of Galvalume Sheet Roofing (0.47mm thick) etc., (over the wrought and putup fixed)

Supply and fixing Mild steel angles for truss work

Brick work in Cement Mortar 1:5 using kiln burnt country bricks with Admixture in Foundation and Basement

Brick Partition wall in Cement Mortor 1:4 (one of cement and four of crushed stone sand) with Admixture 110mm thick for super structure in the following floors using kiln burnt country bricks (a) For Foundation and Basement

Finishing the top of flooring in CM 1:4 with Admixture 20mm thick

Plastering with C.M. 1:4 with Admixture 12mm thick finished

Supplying and fixing of Fibre Mixed Precast Slab of 50mm Thick of all required shapes made in cement concrete 1:3:6 with Admixture using 20mm hard broken stone jelly mixed

Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20mm thick Ellispattern flooring (No Sand)

Special Ceiling Plastering in Cement Mortor 1:3 with Admixture 10mm thick

Manufacturing and supplying of steel windows confirming to IS 1038/1983 Specification with steel section used for fabrication of windows, as per IS 7452/1982 specification

Supplying and fixing of Mild Steel Grills as per the Design Approved to verandah enclosure or gate

Providing and fixing the Cuddappah slab of 20mm thick in CM 1:3 Polished with one side over the RCC platform for kitchen hearth slab (a) For Ground Floor

(b) For First Floor

(c) For Second Floor

Providing Cuddappah slab of 20mm thick finishing with two sides for cupboard, sunshade, ward-robes, shelves, side slabs of boxing around windows and other similar works (Both side polished) (a) For Ground Floor

(b) For First Floor

(c) For Second Floor

Supplying and fixing of 110mm dia PVC SWR pipe with ISI mark confirming to IS 13952:1992-type 'A' for Rain Water Down Fall Pipe

Supplying and fixing of following dia UPVC Gate Valve confirming to IS Specification with ISI mark (a) 32mm Dia UPVC Gate Valve

(b) 25mm Dia UPVC Gate Valve

Please Enable Macros to View BoQ information