PROVN OF DEFI SINGLE LIVING ACCN FOR JCOs AND JCOs CLUB AT MH CTC PUNE

Amount

NOTE: Schedule ‘A’ Part I to XII are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-13 only.

Total amount of Sch 'A' Part-I (Building Works)

Total amount of Sch 'A' Part-II (Internal water supply)

Total amount of Sch ‘A’ Part III (Internal Electric Supply)

Total amount of Sch ‘A’ Part IV (External Water Supply)

Total amount of Sch ‘A’ Part V (External Electric Supply)

Total amount of Sch 'A' Part-VI (Road, Path and Culverts)

Total amount of Sch 'A' Part-VII (Sewage Disposal)

Total amount of Sch ‘A’ Part VIII (Area drainage)

Total amount of Sch ‘A’ Part IX (Compound wall, fencing & gate)

Total amount of Sch ‘A’ Part X (Solar water heater system)

Total amount of Sch ‘A’ Part XI (Excavation, Earthwork & Site Clearance)

Total amount of Sch ‘A’ Part XII (Demolition of existing building)

SCH 'A PART XIII (Miscellaneous B/R and E/M works) Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 6 signifies this fact only

S&F wall/ceiling mounted LED batten for surface applications anodised and extruded aluminium housing High transmissivity diffuser high lumen output of 20watt complete with all accessories internally pre wired and necessary mounting arrangments , provision of 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting , Cat No BCLAB 20W of Bajaj or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

S&F energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP66 security light fitting luminaire with high power LED's as light source and electronic driver of capacity 25watts with prewired and necesary mounting arrangement, including provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including GI pipe 32mm dia 1.5 M length, medium grade tube including two Nos of clamps fixed with suitable size screws, complete all as specified and as directed.Cat No BCLST 25W LED IV2 of Bajaj or equivalent in makes listed in Appendix 'C',

Supply & fix PVC body exhaust fan 250mm sweep, 1400RPM, single phase, light weight, white/ivory plastic rust proof body & blades, self opening louvers for protection from birds and rain water, fixing by means of rugged bolts, nuts and washers etc on the round hole cut in wall, including three core copper conductor flexible cord of 0.5sqmm cross sectional area of required length from ceiling rose to porcelain connector block of exhaust fan suitable on working AC, SP 230 V electric supply. Make Bajaj Cat NO Maxima DX 8" or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

Supply & fix ceiling fan, 1200 mm (48") sweep with BLDC motor, 5 star rating BEE mark (after assembling the same with the fan hook/box) with the fan hook/box and connecitng up complete with and including electronic fan regulator stepped type, modular type, 2 module flush and with and including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to porcelain connector block of fan. Make : Bajaj Cat No KASSEL STAR or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

Supply and fix telephone socket 2G complete all as specified and as directed.

Supply and fix TV socket complete all as specified and as directed.

S&F MCB Single pole 240 volts 6 Amps to 32 Amps 10 KA complete all as specified and directed.

S&F MCB Single pole and neutral 240 volts 32 Amps 10 KA complete all as specified and directed.

S&F MCB Four Pole (TPN) 415 volts 63 Amps 10 KA complete all as specified and directed.

S&F MCB Four Pole (TPN) 415 volts 40 Amps 10 KA complete all as specified and directed.

M &L for submain wiring with 2 single core FRLS PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 4.0 Sqmm drawn through consealed conduit and including PVC conduit heavy grade with and including 1 single core 4.0 Sqmm 1100 V grade FRLS PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed.

M &L for submain wiring with 2 single core FRLS PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 2.5 Sqmm drawn through concealed conduit and including PVC conduit heavy grade with and including 1 single core 2.5 Sqmm 1100 V grade FRLS PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed.

M& L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5 m below ground level), connected to and including Galvanised steel earthing wire 4mm dia by means of bolts, nuts & checknuts and washers etc; GI pipe 15 mm dia medium grade pipe for protection of G.I earth strip, both to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to electrical main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate , including PCC 1: 2 : 4 type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with G.I 20 mm dia medium grade pipe and M.S funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of strata & testing on completion.

M& L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5 m below ground level), connected to and including GI strip 32x6 mm by means of bolts, nuts & checknuts and washers etc; GI pipe 40 mm dia medium grade pipe for protection of G.I earth strip, both to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to electrical main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate , including PCC 1: 2 : 4 type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with G.I 20 mm dia medium grade pipe and M.S funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of strata & testing on completion.

M& L for cutting of existing CI tubing of size 100mm bore for taking out branch connection of CI pipe 100mm dia including one number CI reducer tee of size 100mmx100mmx80mm all ends socketed type 01No., tail piece CI 100mm spigot and socketed 02No., run lead joints 100mm 4 joints and 80mm 01 joint for 50mm GI outlet and connect GI pipe 50mm dia including jointing material and necessary excavation and earth work in any type of soil complete all as specifed and as directed.

Material & labour for construction of valveblock masonry valve pit of internal dimensions 600mmx600mmx900mm in PCC 1:4:8 type D-2 using 40mm stone aggrgate for foundation of 150mm thick, 150mm wide offsets around over 100mm thick hard core, 200mm thick PCC 1:3:6 type C-1 solid block walls in cement mortar 1:4, PCC coping 50mm thick in cement concrete 1:2:4 using 20mm graded stone aggregate finished smooth, rendering cement plaster 15mm thick in cement mortar 1:4 and finished even and smooth without using extra cement internally all round and externally upto 300mm from top including fabrication of MS cover embedded to chamber, using 40x40x6mm angle iron,MS plate of size 900mmx900mm and 6.00mm thick,handle made out of flat iron of size 25x4mm, butt hinges heavy weight, cold rolled mild steel of size 125mm-2Nos, including painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer including excavation and earth work in hard /dense soil complete all as specified and directed by Engr-in-charge.

Supply, laying, testing and commissionnig of UG LT cables 1100 volts grade, XLPE insulated, screened and PVC sheathed, galvanised steel strip or wire armoured with multi stranded aluminum conductor, ISI marked, heavy duty including cable glands, cable lugs in LT panel/MDB in building etc to suit the cable including material and labour for all jointing/connecting material as required size, cables laid in trenches/ducts/under plinth floors passing through pipes etc, fixed on wall complete of following sizes :-

(a) 120 sqmm x 3.5 core (For Main Supply)

(b) 16 sqmm x 4 core (For Bldg Light)

(c) 6 sqmm x 4 core (For Street Light)

Supply and fix 4 Pole MCCBs 100 Amps capacity 50Hz, 415 Volts, 25KA in existing panel with necessary suitable size gland for LT cables, lugs, ferrules etc complete all as specified and as directed. (Location -At substation No 02 LT Panel)

Design, supply, installing, testing and commissioning of weather, dust and vermin proof LT distribution panel board factory made, outdoor type of suitable size so as to accomodate the following accesories, depth not less than 500mm, IP 54, and all as per IE rules, prewired and fabricated with 3.15mm thick CRCA sheet epoxy power coated double door with aprons, duly powder coated after seven tank process with fully compartmentalised / modular construction with Bus bar and cable ally, mounted on MS 50x50x6mm angle iron frame and in shape with two coats of synthetic enamel paint over a coat of red oxide primer including necessary grouting in PCC 1:3:6 type C-1 using 20mm graded coarse stone aggregates complete with leg 50cm grouted in ground in PCC at 40cm above ground, including connection cable with cable glands, lugs etc and consisting of the following:- . Note: PCC plinth will be measured and paid separately.

(a) Aluminium bus bar 200Amps-04 Nos for phases and 01 Nos for neutral duly colour sleeved mounted on epoxy insulator-01 Set

(b) Incoming

i) MCCB 100 Amps, FP, 415V, 50Hz ICU 25 KA thermal magnatic release type with rotary handle - 01 No

(c) Outgoing

i) MCCB 63 Amps, FP, 415V, 50Hz ICU, 25 KAthermal magnatic release type with rotary handle- 4 No.

ii) MCB 32 Amps, SPN, 240V, 50Hz , 10 KA -02 No. ( for street light)

iv) LED type indicator lamp (R,Y,B) set of Three. - 01 Nos.

v) LT Danger board

vi) Panel control wiring complete with suitable size copper conductor cable and suitable size gland for LT cables

Note: Panel shall be manufactured by the reputed manufacturer who is possession of type test certificate by CPRI not older than ten years.

S & F LED street light fittings 72 W Green Line, as in road light luminaire with high power LED and unique peanut lens to ensure uniform light distribution, higher spacing between poles and maintenance free system and necessary fixing arrangements, IP 66, and including connecting flexible copper conductor wire PVC insulated of 2x2.5Sqmm and 1x2.5Sqmm as in earth conductor all as per Philips cat No BRP410 LED CW 072 MR FG S1 PSU GR or equivalent of make listed in Appendix 'C', complete all as specified and as directed.

S & F factory made PVC Junction boxes of size 250x200x80mm for street light fittings, weather proof IP-54 protection, hinged door, with Bakalite connector 100 Amps capacity, 4 way and 01 No MCB SP of 6Amp, necessary fixing arrangement such as clamps, nuts, bolts, with and including 2 Nos GI pipe 1m long each for cable entry and exit all as specified and as directed.

M & L for 150mm thick (compacted thickness) Wet Mix Macadam (WMM) laid in two layers 75mm each layer, laying spreading (with paver finisher only) and compacting base course of graded stone aggregates and granular material conforming to MORT&H specifications,(Table 400-II) in layers of equal compacted thickness each, consolidated, including pre-mixing the material with water at OMC in mechanical mixer, carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub base/ base course and compacting with power vibratory roller to achieve the desired density complete as per MORT&H specification clause -406 including material, labour, machinery, lighting, guarding and maintenance of diversion, complete all as specified and as directed.

Supply, installing, connecting, testing and commissioning fully stainless steel storage type water cooler 80 Litrs capacity and cooling capacity 40 Litrs per Hour, based on eco friendly gas R-134a all as directed at site including extending drain out pipe to the nearest drain system complete of make Blue Star/LG/Voltas, all as specified and as directed.

Supply. Install and commissioning of refrigerator, electric driven, single phase of capacity 310 Lit BEE 5 star rated complete all as specified and directed. Make LG Cat No GL-318PNQ5 or equivalent in Viltas/ Blue Star.

Supply, Install and commissioning of deep freezer, glass top, electric driven, single phase AC 240 Volts , 50Hz, of capacity 400 Lit having double door complete all as specified and directed. Make LG Cat No GL-318PNQ5 or equivalent in Voltas/ Blue Star.

S & F water heater storage vertical type ISI marked 5 Star Rating electric supply 230Volts, 50 Hz, capacity 25 Ltr including inlet and outlet PVC connection pipe 600mm long, fixed to wall vertically by fastener bolts with nuts and washers complete all as specified and directed.

ganesh electricals and airconditioners

United Sales Corporation