REPAIRS TO PLASTERING JOINERY TILING FLOORING PLUMBING AND OTHER COMPREHENSIVE MAINT WORK FOR UNITS UNDER AGE B/R I AT GE BENGDUBI MIL STN

Amount

SCHEDULE 'A'

Taking down cement plaster on brick or stone walls, ceiling/roof etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and directed.

M&L rendering 5 mm thick in cm 1:3 on ceiling/over/soffit of chajja finished surface even and smooth with out using extra cement complete all as specified and directed.

M&L preparation of new plastered surfaces of wall, etc and applying two coat of cement base paint over a coat of 1mm thick wall care putty complete as specified and directed.

M&L for preparing new plastered surface of walls and applying two coat of oil bound distemper white or any tint over 1mm thick wall care putty etc complete as specified and directed.

M&L for preparing new plastered surface on ceiling and applying three coat white wash complete as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n. Exc. 4 sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 sqm but n. Exc. 2 sqm each complete all as specified and directed.

S&F for Pressed Steel frames for doors of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F for Pressed Steel frames for doors of size 165x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

M & L for PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, fixing of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed including formwork if required complete all as specified.

S&F Flush shutters, 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hard wood 30 mm thick made glazed and skeleton shutters open rebated and prepared to divided into square with plain chamfered rounded mitred and rebated, without sash bar, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F in repair Steel window with side shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded as specified as directed.

Ditto all as per item No 16.00 here-in-before but without glazing bar

S&F in repairs steel ventilator with top hung shutter including hinges steel peg stay, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed.

S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide on new steel surfaces of any description over 10cm in width or girth including preparation of surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces of any description over 10cm in width or girth including preparation of surfaces complete all as specified and directed.

S&F Solid PVC frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 100 mm mild steel butt hinges, medium weight, cold rolled, complete all as specified and directed.

S&F 150mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixedcomplete all as specified and directed.

S&F 150mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F Aluminium handles, 150 mm size, cast type anodized complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts, 150mm long, of extruded section complete all as specified and directed.

S&F 300mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and directed.

S&F 4mm thick figured glass and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden /steel frames , glazed with putty or fixed with beads all as directed.

S&F in repair Galvanised steel wire cloth. 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as directed.

M&L for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile and including 15mm thick screed bed or bedding layer in cement mortar (1:6) in floor etc complete all as specified and directed.

M&L glazed ceramic coloured tiles (450 X 300 X 7mm) thick as in vertical surfaces (skirting/dado) set & jointed in neat cement slurry & pointed in white or coloured cement to match the existing surface complete all as specified and directed.

M&L for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile and including 15mm thick screed bed or bedding layer in cement mortar (1:6) in floor etc complete all as specified and directed.

Ditto all as per item No 39.00 here-in-before but as in skirting including rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and as directed

M&L for granite (of any type) stone slab 18-20 mm thick (table rubbed and polished), in skirting, Kitchen platform /dado etc laid over cement screed bed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including etc complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-.20mm thick, (table rubbed) (moulded exposed edge) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding the edges half round and rubbing and polishing including screed bed of bedding layer of morter 20mm thick in CM 1:6 etc complete all as specified and as directed

M&L for Machine cut kota stone slab18- 20mm thick, (table rubbed) (moulded exposed edge), in riser and steps, skirting, dado , over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding the edges half round and rubbing and polishing including rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed

Demolition of cement concrete in ground floors and pavings n.exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in flooring, finshed even and smooth without using extra cement complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protections, finished even and smooth w/o using extra cement with joints to be given every 3m interval and corners of building and filled with bituminious mastic mortar or equivalent fillar complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregates) as in roof kerbs rounded or chambered on edge complete all as specified and directed.

M&L for PCC 75mm thick 1:3:6 type C2 using 40mm graded stone aggts as in floor,path dtc finishing the surface rough to receive tilies complete all as specified and directed.

M&L for chequered cement concrete tile of approved quality size 300X300X 25mm thick on floors set and jointed in neat cement slurry and pointed with grey cement and no pigment complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 with grey cement and no pigment, laid over & including 25mm thick sand cushion laid dry, joint filled with dry sand and vibrated with mechnical compressor over 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregates complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets and frame work complete all as directed.

S&F suspended false ceiling using anodised GI Exposed ceiling suspension system perimeters channel 0.55mm thick having web of 27mm and flange of 30mm on one end 20mm on other and fixed to wall with the help of nylon sleeves and providing fixing Gypsum board 12mm thick in ceiling fixed with screw and GI frame and finished surface and finishing surface attachment and finnaly board have tobe jointed and finished look with POP,oil based putty with primer and two coat of plastic paint to have a flush look using jointed compound/tape painting complete etc all as specified as directed.

S&F in repair decorative stainless curtain rod of wooden finish 20mm dia thickness not less than 0.75mm fixed with curtain rod holder fixed in walls wih screws and finials caps with 06 Nos of curtain ring per Rm complete all as specified and directed. (Note:- Curtain rod holder and finials caps will be measured and paid seperately at supply only rates)

Supply only decorative stainless curtain holding bracket suitable for holding 20mm curtain rod heavy duty complete as specified and directed.

Supply only decorative stainless steel finial end cap suitable for curtain rod of 20mm dia as approved complete as specified and directed

S&F in repair health faucet with flexible pipe 15mm bore 1.5 m long complete as specified and directed.

Dismantling PVC water tanks exc. 500 litres but n. exc. 1000 ltrs capacity complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20 mm iron pipe or for unions and fixed complete all as specified and directed.

S&F Ball brass float valves,high pressure, with polythene float and flynut complete, screwed for 20 mm bore iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed.

S&F in repairs Spazio Premium Quality 304 Grade Stainless Steel Butterfly Type Jet Spray toilet Bidet Hands-Free Spray with 1.5 Meter Heavy PVC Hose (Chrome) complete all as specified and directed.

S&F in repair plastic seat cover, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair two way angle cock 15 mm bore cast copper alloy, fixed complete all as specified and directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F in repair of 15 mm bore pillar taps fancy type (long neck) cast copper alloy with capstan heads chromium plated screwed down high pressure with or without letter hot or could with long screwed and shanks and fly nuts screwed for iron pipes complete all as specified and directed.

S&F in repair Bib tap 15 mm, fancy type, long swan neck, CP with crutch or butterfly handle screwed down srewed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Brass CP mixer for mixing hot & cold water screwed down for 15 mm bore pipe complete all as specified and directed.

S&F in repair CP angle stop cock 15 mm bore fancy type cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repairs CP brass shower rose 125 size dia complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair chromium plated Soap dish complete all as specified and directed.

S&F looking mirror 450X600mm with plywood backing and aluminium frame all as specified and directed by Engineer-in- Charge.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including 40mm CP waste fittings and waste pipe , fixing cantilever brackets and connecting union to pipe, overall size 495mm X 420mm bowl size 410mm X 330mm X 160mm complete all as specified and directed.

S&F in repair Vitreous china wash down water closet European type (pedestal pattern) (excluding flushing cistern and flush pipe) including connection to outgoing pipe and seat cover and flushing pipe all as specified and directed. (Make: Hindware or Cera)

S & F in repairs 10 lits capacity PVC flushing cistern low level, white, with inlet, ball valve, float and handle and flush pipe including brackets etc complete all as specified and directed.

S&F in repair vitreous china wash hand basin in repair oval special type 510x410mm including CP fancy type 15 mm pillar taps including 32mm dia PVC waste pipe, and 32 mm dia brass CP waste coupling complete all as specified. (Make-Hindware, CERA)

S&F in repair PVC Connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair Vitreous china squatting pan 'Orrisa' patterns of size 580mm x 440mm white, (excluding flushing cisterns and flush pipe), including brass chromium plated trap 'P' or 'S' pattern with inlet and outlet integral foot rests, complete all as specified and directed.

Taking down steel tubing and connection 15mm bore complete all as specified.

Taking down steel tubing and connection 20mm bore complete all as specified.

S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and directed.

Ditto all as per item no. 83.00 here-in-before but 20 mm dia bore pipes

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified and directed.

Supply and fix in repairs PVC pipes 110mm bore single socketed in any length with rubber ring joints fix to wall all as spcified.

S & F 75 mm PVC pipes as in fixed wall all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

M&L for brick work with fly ash Bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and directed

M&L Fly ash Brickwork straight or curved on plan exc 6m mean radius built in Cement morter 1:6

Dimantling of Asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and as directed

S&F Pre-painted coloured trapezoidal profiled Galvalume / Zincalume sheet with min thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, AI Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted coloured plain Galvalume / Zincalume sheet with min thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, AI Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) fixed with self tapping screws complete all as specified and directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 66,297.50 (refer Tender Srl Page No 37). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

J T ENTERPRISE

Paritosh Saha

MS CHOWDHURY ENTERPRISE

T K GANGULY

PRADIP KUMAR BOSE

M/S CONTRACTS

M/S AHUJA TRADING