Construction work of Community Hall Building at ward no.3, zone-03, Dharwad

Construction work of Community Hall Building at ward no.3, zone-03, Dharwad

Demolishing brick work manually by mechanical means including stacking of seviceable material and disposal of unserviceable to the cement mortar

Dismantling roofing including ridges, hips, valleys and gutters etc., andstacking the material to the appropriate disposal area as per direction of Engineer-incharge

Earth work in surface excavation by mechanical means for lowering leveling the ground for all works other than foundation in all kinds of soils upto depth not exceeding 300mm as per drawing and techni...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing & technical specifications, including setting out, shoring, strutting, barricading, caution ligh...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400 x 200 x 200 mm having block density more than 1800 kg/m3 & minimum compressive strength of 4.00 N/mm2 conforming to ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/ trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Cod...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggreg...

Addendum I Percentage Additionalities for Formwork,Centering & Scaffolding Foundation upto Plinth b. All other types (3%)

Addendum IPercentage Additionalities for Formwork,Centering & Scaffolding RCC Columns / Shaft (Slip Centering) 70%

Addendum I Percentage Additionalities for Formwork,Centering & Scaffolding Plinth Beams of Buildings (50%)

Addendum I Percentage Additionalities for Formwork,Centering & Scaffolding RCC Beams, Lintels & Troughs of Aqueducts 60%

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding Chejjas, Canopy & Other Architectural projections of minor sections(45%)

Addendum I Percentage Additionalities for Formwork,Centering & Scaffolding RCC Roof Slabs (50%)

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing & removing scaffolding, incl...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing and fixing hand rail of approved size by welding etc to steel ladder railingbalcony railing staircase railing and similar works including applying priming coat of approved steel primer GI pi...

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

Providing and fixing bright finished brass butt hinges with necessary screws 25x85x5.5 mm (heavy type)

Providing and fixing bright finished brass handles with screws etc. comp

Providing and fixing bright finished brass tower bolts (barrel type) with

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinderof 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curi...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of Tiron 40406 mm, with 40 mm d...

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete ...

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangments & all necessary accessaries complete

Providing and fixing brass bib cock of approved quality : 15 mm nominal bore

Providing and fixing brass bib cock of approved quality : 20 mm nominal bore

Providing and fixing brass stop cock of approved quality : 15 mm nominal bore

Providing and fixing brass stop cock of approved quality : 20 mm nominal bore

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25 mm nominal bore

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced w...

Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The cond...

Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement ...

Supplying heavy gauge PVC conduit pipe . mm dia. mm thick confirming to IS 2509 with suitable size bends, metal/ PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The co...

Supplying heavy gauge PVC Conduit Pipe . dia . mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement ...

Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire)...

Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire)...

Point wiring using Copperwire without switch.Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) ...

Wiring for lightingpower circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealedsystem of wiring with specified IS-694...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system of wiring with specified IS-...

Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 3.4....

Supplying and flush-mounting a powder-coated/galvanized metal box suitable for mounting modular switch plates. The box shall be firmly fixed in position after cutting the required groove in brick/ston...

Supplying and flush-mounting a powder-coated/galvanized metal box suitable for mounting modular switch plates. The box shall be firmly fixed in position after cutting the required groove in brick/ston...

Supplying and flush-mounting a powder-coated/galvanized metal box suitable for mounting modular switch plates. The box shall be firmly fixed in position after cutting the required groove in brick/ston...

Supplying and flush-mounting a powder-coated/galvanized metal box suitable for mounting modular switch plates. The box shall be firmly fixed in position after cutting the required groove in brick/ston...

Supplying and fixing superior-quality modular switch mounting polycarbonate plate with necessary supporting back plate, complete with the required number of machine screws, bolts, nuts, etc., on the e...

Supplying and fixing superior-quality modular switch mounting polycarbonate plate with necessary supporting back plate, complete with the required number of machine screws, bolts, nuts, etc., on the e...

Supplying and fixing superior-quality modular switch mounting polycarbonate plate with necessary supporting back plate, complete with the required number of machine screws, bolts, nuts, etc., on the e...

Supplying and fixing superior-quality modular switch mounting polycarbonate plate with necessary supporting back plate, complete with the required number of machine screws, bolts, nuts, etc., on the e...

Supplying and fixing superior-quality modular switch mounting polycarbonate plate with necessary supporting back plate, complete with the required number of machine screws, bolts, nuts, etc., on the e...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.1) 6Amps one way. PWD,Elct, SR- 2023-24 Page No. 9 Item code 3.6.1

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.3)6Amps 3way socket PWD,Elct, SR- 2023-24 Page No.9 Item code 3.6.3

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 3.6.4)Stepped Fan Regulator Two Module PWD, Elct, SR-2023-24 Page No.9 Item ...

Supplying And Fixing Metal Fan Box with Round Hook. PWD,Elct, SR-2023-24 Page No.4 Item code 1.13

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 3.14.5)6A Bakelite Ceiling Rose PWD,Elct, SR- 2023-24 Page No.10 Item code 3.14.5

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 3.14.7)6A Batten Holder PWD,Elct, SR-2023-24 Page No.10 Item code 3.14.7

Supply of round/ square recess surface mounted rolling type LED Down light with W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivel...

Supplying of .feet- PVC Batten with integrated LED tube . .W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. PowerInput: 220-240V 50/60Hz Power factor ...

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulated wires...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball...

Fixing a ceiling wall mounting fan of all capacities and all types, with necessary clamps and S hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length of 23...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 5.7.2) 32Amps PWD,Elct, SR-2023-24 Page No. 14 Item code 5.7.2

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing regular MCB distribution boards on wall/ woodboard / flush mounting using required clamps, bolts, nuts etc., withprovision for fixing suitable type capacity MCB's single phase/3ph...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5....

MS BoxFabricating supplying and mounting MS box made out SWG suitable for floor wall mounting, fully weather proof with provision for better heat dissipation provided with hinged front coverequipped w...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. 5.38) PWD,Elct, SR-2023-24 Page No.19 Item code 5.38

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter.5.30 PWD,Elct, SR-2023-24 Page No.19 Item code 5.30

Supplying and fixing hylum plastic sheet 3 mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws.3.9 PWD,Elct,SR-2023-24 Pag...

Supplying & fixing of retrofit type - LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI 70 efficacy 80 lumen per Wlife 25000 burning hours and Compliance to I...

Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applications.PWD,Elct, SR-2023-24 Page No.47 Item code 11.15

LED Street light. Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injec...

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit. The pit should...

8 SWG GI Wire(4.064 mm Dia), Std Wt: 131 Kg/KM .ESCOMS SR-2023-24 Page No.5 Item code 8.02

1.1Kv XLPE or Heat resistant PVC insulated,PVC Extruded Inner sheath Armoured LT UG cable as per IS-1554(part-1 )or IS-7098 Part 1,Armouring strip thickness and resistivity as per IS-3975 32.03) 10 Sq...

HDPE/PLB Pipe 50/42 mm ESCOMS SR-2023-24 Page No.30 Item code 66.04

Aluminium End Terminal (Lug) , 60.01)10 Sqmm ESCOMS SR-2023-24 Page No.27 Item code 60.01

Brass Cable Gland 63.01) 25 mm ESCOMS SR-2023-24 Page No.28 Item code 63.01

Providing PVC ringtite pipes conforming to IS 4985:2000 with latestamendments and conveying to worksite, rolling and lowering intotrenches, laying true to line and level and perfect linking at joints,...

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LT UG Cable 35.01 ) Up to 4C x 50 Sqmm ESCOMS SR2023-24 Page No.15 Item code 35.01

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting,finishing with necessary cement plastering complete. 1.6.1) 12" x 12"...

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 21.05 2.5 to 25 Sqmm ESCOMS SR-2023-24 Page No.28 Item ...