COMPREHENSIVE SERVICES INCLUDING REPAIR AND MAINT OF INTERNAL ELECTRIFICATION AND OTHER MISC WORKS AT VIVEK VIHAR COLONY UNDER GE WEST LUCKNOW

Amount

Demolition of brick work or stone/ boulder masonary, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles etc. complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L brick work with old size fly ash bricks of class designation 75, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string cources, lacing cources, parapets and railing upto 60cm in hight, copings, kneelers, apex stones, bed plates, water troughs, hold fasts and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

M&L Mild Steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n. exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and directed.

Taking down shutters of any description, area n. exc 1.00sqm each complete all as specified and directed.

Taking down shutters of any description, area exc 1.00sqm but n. exc 2.00sqm each complete all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specified in SSR Part-I Section 8 clause 8.24(a) and fitted to chowkats complete all as specified and directed.

S&F flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F factory made Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, supplying and fixing in opening with fittings as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for Top & bottom rails, MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100mm size butt hinges, medium weight, cold rolled, mild steel and fixed with screws complete all as specified and directed.

S&F 150mm size extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

M&L in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads in square, area n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for welding in repairs exc 2.5cm but n. exc 5cm in length, thickness of metal to be welded n. exc 6mm thick including cleaning, preparing surfaces to be welded and bevelling of edges, as required complete all as specified and directed.

S&F in repair mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Taking down cement or cement lime plaster any description from walls/ceiling etc including racking out joints, hacking for key & scrubbing down with water all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surface of ceiling and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for two coats of oil bound distemper over one coat of primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for one coat of oil bound distemper on previously treated plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for two coats of cement base paint over one coat of primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for one coat of cement base paint on previously treated plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for two coats of exterior emulsion weather proof paint on old decorated plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for two coats of white wash on old decorated plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for one coats of white wash on old decorated plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of wood or wood based materials of any description over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old or previously treated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for 40mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor, finished surface even and smooth without using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for joint free glazed ceramic tiles, coloured, superior quality of size 450x350x7mm thick, in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for joint free non skid ceramic tiles, coloured, superior quality, 7 to 8mm thick, (square/ rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in vertical surfaces etc., set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in landings, cover slabs (for man holes, drains etc.) chullah hoods, chajjas, water troughs, mangers, shelves etc and similar works set in cement mortar 1:4 complete all as specified and directed.

M&L 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub bases of floors and pavings etc. finished even and fair without using extra cement complete all as specified and directed.

M&L for 60mm thick M-35 grade factory made machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete all as specified and directed.

S&F in repair 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F in repair 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F in repair 25mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floors complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. from existing water tanks of capacity exc. 250 litres and not exc. 500 litres of any type and in any position complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 20mm bore pipe (Min weight 210gms) complete all as specified and directed.

S&F in repair Vitreous China squatting pan, 'Orissa pattern', size 580x440mm, white, with integral foot rests including PVC 'P' or 'S' trap, excluding flushing cistern and flush pipe, including connection to trap and flushing pipe etc. and making good to floor complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type, low level, flushing cistern of 10 lit capacity, white, with inlet, ball valve, float valve and handle including bracket, rubber cone and flush pipe etc. and connection to pipes complete all as specified and directed.

S&F in repair vitreous china Wash basin, white, flat back type of size 550x400mm including CP waste coupling and 32mm dia waste pipe and fixing of 02 nos brackets made out of 40x40x5mm MS angle iron etc. complete all as specified and directed.

S&F in repair bib taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed.

S&F in repair Pillar taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe including all accessories complete all as specified and directed.

S&F in repair angle valves 15mm bore, fancy type, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15mm bore PVC connections, superior quality, with CP brass nuts of length 450mm complete all as specified and directed.

S&F in repair brass chromium plated overhead shower rose with arms, 125mm size, round shape, single flow, fancy type, suitable for 15mm bore pipe and fixed complete all as specified and directed. Make: Jaquar or Hindware or Parryware.

S&F in repair CP brass tubular towel rail 20mm dia, 'D' type, 600mm long between flanges, superior quality, fancy type, fixed to wall with PVC gully and CP brass screws complete all as specified and directed. Make: Jaquar or Hindware or Parryware.

S&F in repair 20mm dia stainless steel CP curtain rod, superior quality, with end bracket and end knobs and fixed to wall with wooden plug/ PVC gully with CP screws and cup washers complete all as specified and directed.

S&F in repair kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers, waste coupling and waste pipe, including bedding in cement mortar 1:3 to dwarf wall or fixing cantilever brackets and connecting union to waste pipe, overall size 915mmx460mm with bowl size 410x330x160mm complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack (utensil rack) of size 750x600x250mm, made out of 0.8mm thick stainless steel sheet, approved design and fixed to wall with brass screws and PVC gully including all necessary fittings like nuts and bolts etc complete all as specified and directed.

S&F in repair PTMT grating doom, 100mm dia, standard of any colour, (minimum weight 25 grams) and fixed complete all as specified and directed.

S&F in repair 32mm bore PTMT waste coupling (half or full threaded), standard of any colour, (minimum weight 45 grams) and fixed complete all as specified and directed.

S&F in repair 32mm bore PVC flush pipe of high density polyethelene, superior quality, ISI marked for low level cistern and fixed complete all as specified and directed.

S&F in repair brass spindle with washer for bib tap or stop valve etc. suitable for 15mm bore and fixed complete all as specified and directed.

S&F in repair PVC syphon kit complete with fittings, ISI marked, suitable for PVC low level flushing cistern and fixed complete all as specified and directed.

S&F in repair PVC flush handle with fittings, ISI marked, suitable for PVC low level flushing cistern and fixed complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls with PVC clamp complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls with PVC clamp complete all as specified and directed.

S&F PVC (SWR) bends of any radius, suitable for 110mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.

S&F PVC (SWR) bends of any radius, suitable for 75mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.

S&F PVC (SWR) junction single, (single T), equal or unequal suitable for 110mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.

S&F PVC (SWR) junction single, (single T), equal or unequal suitable for 75mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.

M&L cutting into existing manholes for connecting new drains, making good to 150mm bore pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and directed.

M&L for cleaning/desludging of existing septic tank/ soak well/ man holes of any capacity and depth with inlet/outlet chambers including taking out sludge (both organic and inorganic matter) in any form and other foreign matter etc viz sediment, sand, ash, grease, fibre, silt, roots or vegetation etc by means of sewage sucking machine and after plugging the incoming sewer line through combined high pressure water jetting/ suction (Vacuum) type machine mounted on LCV/HCV facility of high pressure vacuum and removing the sludge outside MOD land by any means and at a place meant for the purpose by local munucipality complete all as specified and directed. Note:- For measurement purpose, Liquid depth of septic tank shall be measured before removal of sludge.

M&L for cleaning/clearing of blocked/ chocked/ non functional sewage line up to 200mm bore of any type and location in between manholes, including manholes n.exc. 3.00m depth and sewage lines between manholes to septic tank/ soak well/ sump well and cleaning the same including desilting/ descaling of drain and manhole by manually or mechanically to make the line functional including taking out sludge and removing the sludge outside MOD land at a place meant for the purpose by local munucipality complete all as specified and directed.

M&L for cleaning/desludging of existing sewage line from nahani trap to 1st manhole by manually or mechanically of any capacity and depth including taking out sludge in any form and other foreign matter etc viz. sediment, sand, ash, grease, night soil, fibre, silt, roots or vegetation etc to make the line functional duly removing the sludge outside MOD land by any means at a place meant for the purpose by local munucipality complete all as specified and directed.

Taking out broken sewage line at a depth n.exc 1.5m and replacing with new sewage pipe line with 150mm bore SGSW pipe including jointing of pipe in CM 1:1 and haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40mm graded stone aggregate including necessary excavation, earth work and disposal of material up to a distance not exc 50m and making necessary connection after cutting into existing sewage line/ manhole to make it functional complete all as specified and directed. NOTE: Cutting existing manhole and making good shall be measured and paid seperately under respective item.

Cleaning of drain of size 30 to 60 cm wide including removal of mud or foul in position (to be dumped in pit made by excavation in soft soil and filled with earth) complete all as specified and directed.

M&L for cleaning and removal of vegetation plant of girth not exc. 20cm with roots from the roof surface and making good to disturbed surface in CM 1:4 or PCC 1:2:4 type B-0 as required at site including removal of same material to a distance n. exc. 50m complete all as specified and directed. NOTE: The work shall be executed up to 12.50m height of bldg with all safety measures and no extra payment shall be paid to contractor on this account.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. NOTE: Credit for this items shall be made as per conditions separately.

Taking down carefully main switches, DB's, MCB DB's of any way or rating and making good the disturbed surfaces of walls complete all as specified and directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

All as per item no 88 above but for one 5 pin 5 Amp socket outlet point on an independent board.

All as per item no 88 above but for one 5 pin 5 Amp socket outlet point on the same board with other switch.

All as per item No. 88 above but for One bell/ buzzer point on an independent board controlled by one bell push

All as per item No. 88 above but for One light point controlled by two two switch

All as per item no 88 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50sqmm and green colour earth cable of size 2.50sqmm.

S&F Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

S&F Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

S&F Switch piano, flush type, single pole, two way 5/6 Amp 230 Volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2in1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.

S&F socket outlet, flush type, single pole, multipurpose 2in1, 5 pin 15/16 Amp, 230 volts complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F bell push, flush type, single pole, one way 5/6 Amp, 230 volt flush type complete all as specified and directed.

S&F in repair call bell, ding dong type, AC single pole, 230 volt complete all as specified and directed.

S&F sheet metal enclosure for VTPN DB double door type, 4 way, suitable for 4 pole MCCB, 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCCB/ MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, tripple pole and neutral 4 way, 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way, 240Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed.

S&F MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, single pole & neutral 40 to 63 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCB, triple pole & neutral 63 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F MCCB, 63 Amp, 4 pole, 415 volts, 16 KA breaking capacity complete all as specified and directed.

S&F in repair sheet metal enclosures, single pole with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

S&F in repair ceiling fan regulator, electronic, rotary step up socket type, 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.

S&F in repair sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4sqmm nominal cross sectional area and one run of 4sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25mm dia 'medium grade' PVC concealed conduits (ISI marked) and fittings complete all as specified and directed. NOTE:- One unit length shall measured as two run of main wire and one run of conduit & earth wire.

S&F in repair wall mounted 20/22 W LED integrated tube light fitting, 1200mm long batten with extruded aluminium housing, frosted diffuser and integrated electronic driver with decorative end cap complete and one no 20/22 W LED 6000K, 230V, tube light complete with all required fittings and fixtures arrangement including and provn of connection from ceiling rose to luminaries with PVC 3 core flexible copper wire complete all as specified and directed. Make: Havells Endura Linear Neo cat no. BS 22WLED865SPCWH or Philips cat no. BN 021LED 22S6500/4000 PSU GR/SI or Bajaj cat no. BCLAB 20W WH LED P.

S&F in repair wall mounted 10/12 W LED integrated mirror light fitting, 600mm long batten with extruded aluminium housing & integrated electronic driver and one no. 10/12 W LED, 6000 K, 230V, 100 lumens/watt, tube light including and provn of connection from ceiling rose to luminaries with suitable size three core flexible copper wire complete all as specified and directed. Make: Havells Endura Linear Neo cat no. BS 10W LED865SPCWH or Philips Smart Brite cat no. BN 021LED 12S6500/4000 PSU GR/SI or HPL Neptune Plus cat no. 10W HPLT51510CW

S&F in repair 1200mm long wall mounted decorative batten only suitable for 18/20 W LED tube light fitting with extruded aluminium housing, frosted diffuser, integrated electronic driver with decorative end cap complete with all required fitting arrangement including and provn of connection from ceiling rose to luminaries with PVC 3 core flexible copper wire complete all as specified and directed. Make: Havells cat no. REGAL BATTEN8UPTO1X22WDSBSWH or Eveready Easylite box cat no. INBOXFR1X18W or HPL LED Legacy cat no. HPLLEDT820(CW).

S&F in repair 1200mm long 18/20 W ultra bright crystal LED tubelight, 6000 K, 230V with high efficiency, suitable for tube light fitting with all required connection complete all as specified and directed. Make: Havells cat no. CRYSTAL1213T8DSTL20WLED865SGLASS or Philips Essential LED Tube cat no. 20W865T8IND or equivalent in Eveready.

S&F in repair security light fitting of 24/25 W LED 6000 K, with high power LED source (more than 110 lumens/ watt), PDC housing, IP65 and IK 07 with 4KV inbuilt surge protection driver and one no. 24/25W LED tube, with all accessories, prewired with and fixed to bldg/pole including GI bracket 1.20m long bent to shape, made out of 25mm dia GI light grade pipe with nuts, bolts and washers and provn of connection from ceiling rose to luminaries with PVC 3 core flexible copper wire complete all as specified and directed. Make: Philips Green Line Smart cat no. BRP042LED25CWR1S1PSU GR or Bajaj Edge Next LED cat no. ENXT P24L WH CR PC SD or Eveready Mini Might cat no. LED SL025 157-02.

S&F in repair integrated LED Post top lantern with high power 25/30 W LED as light source, energy saving, envioronmental friendly, long life asethetically designed with symmetrical light distribution, spun auminium landscape lumainaire incl LED driver complete and incl neceesary electrical connection complete all as specified and as directed. Make: Havells cat no. Ruby Clear RUBYPT25WLED757PSYMTOPC or Surya cat no. E-TOPP or Bajaj ARIAN cat no. BGCTN 25W LED WW

S&F in repair surface type round LED 12W downlighter of dia 160mm as required complete all as per specified and directed. Make: Philips Sleek Surface SM250 & SM251 (Circular) or Havells Integra Neo (Surface) cat no. DLS15WLED840S or Bajaj Sleek Surface cat no. BGSLO SLEEK SURFACE 12W WH RD.

S&F in replacement LED bulb 7/9 W, B-22 base, 6000K complete all as specified and directed. Make: Philips or Eveready or Polycab

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m deep below normal ground level, connected to galvanised earth lead wire 4.0mm dia (7.50m) by means of bolts, nuts, check nuts & washers of galvanised iron or steel, earth lead wire protected by 15mm dia GI pipe light grade, 20mm dia light grade GI pipe for watering, meshed funnel, alternate layer of charcoal and common salt complete all as SSR Item No. 19471 and shown in electrical plate No. 3 of SSR part-I with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way in lieu of CI pit cover and protection including necessary excavation and earth work complete all as specified and directed.

S&F in replacement ceiling fan 1400mm sweep, BEE star rated, copper wound, AC single phase, 230/240 volts complete with fan motor, blade, down rod, canopy and provn of connection with three core flexible copper wire cable of size 1.50sqmm from ceiling rose to fan complete all as specified and directed. Make: Orient (Energy Star) or Khaitan (Magma high speed anti dust) or Havells (Energy saving mode ES neo) or Usha (Energy saving technix plus). NOTE: Old unserviceable fan shall be deposited to EM store yard.

S&F in replacement heavy duty metal body exhaust fan 300mm sweep, copper wound, 1400 RPM, AC single phase, 230/240 volts, fancy type complete with fan motor, blade, bracket, ring and louvers including and provn of grouting 4 nos anchor bolts with nut and washer and making good to disturbed surfaces to match the existing and provn of connection with with three core flexible copper wire cable of size 1.50sqmm from ceiling rose to fan complete all as specified and directed. Make: Orient (Heavy duty)/ Usha (Turbo heavy duty metal body)/ Havells (Turbo Force HP)/ Khaitan (heavy duty metal body). NOTE: Old unserviceable fan shall be deposited to EM store yard.

Opening/ taking down electrical board/ fittings/ fixtures excluding light fittings to identify complaint pertains to internal electrification of any type and nature in Md Accn buildings and rectifying the same like of faulty electric circuits, tightening of loose wiring/ conduits, replacement of defective switch, socket, bell push, lamp holder, fan regulator, copper wire of different sizes, LED bulb, replacement of broken hylam boards, call bell, ceiling fan/ exhaust fan, condensor etc complete all as specified and directed. NOTES: (i) Cost of minor stores such as screws, clamps, insulation tapes, nuts/bolts etc shall be deemed included in the above quoted item. (ii) Spares such as switch, socket, bell push, lamp holder, fan regulator, copper wire, LED bulb, hylem sheet, call bell, fan condensor shall be paid seperately under respective items as supply only.

Supply only Switch piano, flush type, single pole, one way 5/6 Amp 230 Volts complete all as specified and directed.

Supply only Switch piano, flush type, single pole, one way 15/16 Amp 230 Volts complete all as specified and directed.

Supply only socket outlet, flush type, single pole, multipurpose 2in1, 5 pin 5/6 Amp, 230 volts complete all as specified and directed.

Supply only socket outlet, flush type, single pole, multipurpose 2in1, 5 pin 15/16 Amp, 230 volts complete all as specified and directed.

Supply only bell push, flush type, single pole, one way 5/6 Amp, 230 volt flush type complete all as specified and directed.

Supply only angle type lamp holder PVC/ Polycarbonate type with back plate complete all as specified and directed.

Supply only fan regulator, electronic, step type, 230 volts suitable for 1200/1400 mm sweep ceiling fan including necessary connection complete all as specified and directed.

Supply only call bell AC single pole 240 volt Musical Type Make: Anchor/Havells/Bajaj

Supply only 3mm thick plastic laminated bakelite sheet top cover (Make- Hylum) of size 10"x12" including cutting for fixing of switch, socket etc. complete all as specified and directed.

Supply only 3mm thick plastic laminated bakelite sheet top cover (Make- Hylum) of size 8"x10" including cutting for fixing of switch, socket etc. complete all as specified and directed.

Supply only 3mm thick plastic laminated bakelite sheet top cover (Make- Hylum) of size 8"x5" including cutting for fixing of switch, socket etc. complete all as specified and directed.

Supply only 1100 volts grade 1.50 Sqmm single core multistandard PVC insulated unsheathed copper cable (90m bundle pack) complete all as specified and directed.

Supply only 1100 volts grade 2.50 Sqmm single core multistandard PVC insulated unsheathed copper cable (90m bundle pack) complete all as specified and directed.

Supply only 1100 volts grade 4.0 Sqmm single core multistandard PVC insulated unsheathed copper cable (90m bundle pack) complete all as specified and directed.

Supply only twisted twin core flexible wire of size 23/0.0076 complete all as specified and as directed.

Taking down ceiling fan of any sweep, replace the unserviceable parts and refixing the same after necessary repair with provn of new twin core twisted PVC insulated multistranded flexible copper conductor cable of size 23/0.0076 from ceiling rose to fan complete all as specified and directed. NOTE: (i) Rewinding of fan shall be measured and paid separately under respective item. (ii) The rates shall be deemed to be inclusive for replacement of unserviceable parts bearings, capacitors, bushes etc. (iii) New parts like bearing, capacitors, bushes etc shall be paid as supply only.

All as per item No. 141 above but exhaust fan of 230/300mm sweep including and provn of replacement of nut, bolts and washer complete all as specified and directed.

M&L for cutting & removing the burnt winding of ceiling fan of 1200/1400mm sweep, cleaning the slot properly, rewinding with super enamelled copper wire of suitable size, varnishing, heating and insulating and re-assembling the spares complete all as specified and directed.

All as per item No.143 above but for exhaust fan 300mm sweep.

M&L for preparation of old painted surfaces of ceiling fan of any sweep and applying two coats of synthetic enamel paint by using spray gun including taking down and refixing in same location complete all as specified and directed.

M&L for preparation of old painted surfaces of exhaust fan of 300/450mm sweep and applying two coats of synthetic enamel paint by using spray gun including taking down and refixing in same location complete all as specified and directed.

Supply only bearing No.6201/6202 for ceiling /Exhaust fan complete all as specified and directed. (Make - TATA/SKF/NBC).

Supply only bearing No.6203/6204 for ceiling/ Exhaust fan complete all as specified and directed. (Make - TATA/SKF/NBC).

Supply only fan condensor 2.5 mfd complete all as specified and directed. (Make - USHA/UNIVERSAL/Tibcon).

Supply only fan condensor 3.15 mfd complete all as specified and directed. (Make - USHA/UNIVERSAL/Tibcon).

Supply only gun metal bush of any size complete all as specified and directed. (Make - TATA/MSP).

M&L provn of mounting clamp assembly complete for ceiling fan 1200mm/ 1400mm sweep with clamp, bolt, nut, washers, safety/split pins and rubber bush etc complete all as specified and directed.

M/s Reliable Electromech Systems