Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.8 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹48.1 L+₹2.3 L (5.10%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹48.4 L+₹2.6 L (5.69%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹49.1 L+₹3.3 L (7.29%)Rejected-Finance OPP PRIMARY SCHOOL DHAKI PATHANKOT DISTT PATHANKOT PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹49.5 L+₹3.7 L (8.04%)Rejected-Finance 68 BANK COLONY SUNDER NAGAR PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L5 | Rejected-Finance Not Lowest |
Tender Value
Refer Docs
EMD Value
₹91,600
Closing Date
28 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) PATHANKOT
GE (SOUTH) PATHANKOT
CERTAIN MISL REVENUE MINOR AND LBW WORKS UNDER GE SOUTH PATHANKOT
2023_MES_612355_1
GES/PKT/T-18/2023-24
Open Tender
Construction Works
Item Rate
180 days
GE (SOUTH) PATHANKOT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (SOUTH) PATHANKOT
₹91,600
Yes
20 Nov 2023
5 Aug 2023
30 Aug 2023
5 Aug 2023
28 Aug 2023
21 Aug 2023
Amount
Excavation in trenches not exceeding 1.5 meter wide and not exc.1.5 meter in depth in any type of soil and getting out, Complete all as specified and directed.
Removal of excavated (Soil) to a distance exc 100m but not exc 200m and depositing where directed at a level not exceeding 1.5 metre above the starting point ,Complete all as specified and directed.
Returning, filling in (Soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil ,Complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 (using 40mm broken graded stone aggregate) as in foundation, filling and mass concrete all as specified.
M&L for Providing precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone agg, as in cover slabs (for septic tanks, manholes) and similar articles including necessary moulds/form work set in cement mortar (1:4), ,Complete all as specified and directed.
M&L for reinforced cement concrete (Nominal Mix) Type B1 1:2:4 using 20 mm aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.
M&L for reinforced cement concrete (Nominal Mix) Type B1 1:2:4 using 20 mm aggregate in columns, pillars, piers, posts and struts
M&L for reinforced cement concrete (Nominal Mix) Type B1,1:2:4 using 20 mm aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.
M&L for reinforced cement concrete (Nominal Mix) Type B1,1:2:4 using 20 mm aggregate in beams, cantilevers, shelves, bressummers, lintels over 1.5m span
M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter - Rough finished surfaces of concrete - Flat
M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions - Rough finished surfaces of concrete - Square, rectangular or polygonal
M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) - Rough finished surfaces of concrete - Flat
M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc - Rough finished surfaces of concrete - Flat
M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
M&L mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified.
Demolition of brick work or stone work built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified & directed.
M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified & directed.
M&L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6
M&L for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement all as specified.
M&L for 15mm thick plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement all as specified.
M&L rendering 10mm thick on concrete in CM 1:3 in facia or edging of chajjas,ceiling and roof projection making the line in true shape finished even & smooth without using extra cement all as specified.
M&L for preparing the new plaster surface and applying three coats of white wash on ceiling all as specified.
M&L for two coats of cement base paint over a coat of primer over prepared surface of wall complete all as specified.
M&L for two coats of white wash over a coat of primer complete all as specified.
M&L for broken stone or boulder hardcore of guage n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface
M&L 75 mm thick PCC 1:4:8 as in sub base of floors etc and finishing the surface even and smooth without using extra cement complete all as specified.
M&L providing glazed ceramic coloured tiles in vertical surface 450x300mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 10mm thick rendering in CM 1:4 all as specified.
M&L Non skid ceramic colour tiles 7 to 8 mm thick (sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M&L for preparing the new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint all as specified.
S&F steel window/ventilator with tubular frame factory made of size 79mm x 39mm, 16 gauge rectangular tubular frame with side hung shutter both for glazed and wire gauge with glazing bars 12x3mm flat iron incl projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, including two coats of synthetic enamel paint over one coat of red oxide primer all as specified & as shown on drg No CEPZ/TD-245/01 and 246/02 sheet ½ & 2/2 (excluding glass & wire guage).
S&F pressed steel frame for doors made out of MS sheet 1.25mm thick of size 105x60mm for with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkhats all as specified.
S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats with two coat of synthetic enamel paint complete all as specified and directed.
S&F MS barrel tower bolt 150mm long,stove enameled black with bright bolt and fixed all as specified
S&F mild steel 125mm long pressed handle oval type stove enameled black ISI marked all as specified
S&F Mild steel sliding door bolts, plate type, stove enamelled black, withk bright bolt not lesss than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 300mm long
M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection finished surface even and fair without using extra cement.
S&F 100mm long butt hinges medium weight cold rolled ISI marked mild steel .
S&F Solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet used instead of Plain colour PVC sheet and edges will be painted to match with printed sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing. Note : Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for long life)
S&F for Factory Made Solid PVC Moulded Door Shutter wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing
S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes complete all as specified and directed.
S&F glavanized mild steel wire cloths 0.56mm nominal dia and average width of aperture 1.18mm & fixed with tint tacks or glavinized wire staples complete all as specified and directed.
S&F15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls all as specified.
S&F Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors - Bore of tube 20mm
S&F angle valve 15mm bore size fancy type cast copper alloy chromium plated complete all as spd & directed .
S & F long nose bib taps 15mm bore size fancy type cast copper alloy chromium plated complete all as spd & directed .
S&F vitreous china squatting pan, Orissa pattern size 580mm x 440mm with integral foot rest including provision of lime concrete bedding, connection to drain out pipe and to flush pipe, anti-syphonage pipe etc complete all as specified and directed.
S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of 10 Ltr capacity.
S&F, PVC connection 15mm bore size with two nuts and washers of length 450mm all as specified and approved.
S&F 75mm bore PVC floor trap with grating complete all as specified and directed.
S&F for CP Soap Dish fixed with and incl CP screws of as approved by Engr-in-Charge.
S&F rotational moulded polythene water storage tank triple layered (Cylindrical vertical with closed top hoisted fixed in position all as specified capacity of tank 500 ltrs including inlet and out let connections 20 mm air and 15 mm dia GI pipe medium grade.
S&F 20mm PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified
S&F in repair vitreous china wash hand basin (flate back or angle back type) coloured of bowl size 550mmx400mm including waste and waste pipe PVC 32mm dia to be fixed over marble slabs or iron brackets, complete all as specified and directed.
S&F Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass secrews, pointing around urinal in back in cement; fixing automatic cistern with brackts, flush pipe, grating and union for discharge pipe, complete all as specified and directed.
S&F of 75mm PVC (SWR) drain pipes 75 mm bore single socketed in any length with rubber ring joint excavation in trenches along the floor complete all as specified and as directed.
S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints as in repair, fixed to walls with sufficent number of Iron stack clamp complete all as specified and directed.
S&F for 75mm bore pipes,PVC (SWR) bends any radius fitting fo PVC (SWR) pipes complete all as specified and directed.
S&F of 75mm bore PVC (SWR) junction (single T) equal or unequal jointing with solvent cement complete all as specified and directed.
S&F in repair Towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms)
S&F in repairs chromium plated shower rose 75mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.
S&F in repairs stop valve concealed fancy type, long shank and cup (ISI marked) brass chromium plated with crutch or butterfly handle screwed both ends for iron pipe or for union bore pipe of 15mm dia.
M&L for steel water tubing 25 bore, medium grade galvanised with all fittings such as socket, bends, elbows, caps, plugs, short pieces etc (ISI Marked) laid in trenches complete all as specified and as directed.
M&L for gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed cast copper alloy, chromium plated, fancy type ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 25mm dia outer dia sizes complete all as specified.
Cutting cast iron pipes up to 150/100 mm dia and reducing to required length in position for insertion of new tees, branches, etc all as directed by Engr-in-Charge. Note: CI fittings will be measured and paid under relevant items.
M&L Concrete bed in cement concrete C2 (1:3:6) (40mm graded aggregate) to drain pipes of bore 200 mm including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
S&F, 200 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed.
S&F 150 mm dia RCC NP3 pipe laid and jointed complete including providing 150 mm thick cement concrete (1:4:8) type D-2 using 40mm grade stone agg as in bed for pipes incl packing under and huaunching against the sides of pipes after they are laid tested complete all as specified and directed .
M&L for 25 user Septic Tanks, exc, in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC slab covers including RCC precast manhole covers having 6mm plate embedded all around/fiber reinforced cover with angle iron frame vent shaft and sludge chamber etc.
Provn of Septic Tanks 50 users with Sub class 'B' Brick including Inlet and outlet chamber brick masonary with top of slab with RCC 1:2:4 cover slab, 15cm above ground level including necessary excavation and earthwork and disposal pf surplus soil, 15mm PVC bend pipe etc complete as per drg CEPZ/TD-013/2013 SH 1/5 to 5/5
Soakage wells exc, in ordinary soil, foundation in PCC 1:3:6, wells of honey combed and solid in M-25 concrete, including intercepting chamber, screen chamber, brick work in CM, RCC cover slab in M-25/RR masonary/filling with brick bats, complete of size 3.00m dia x 3.0 m deep.
Excavating in post holes (or similar holes) each not exc 0.5 Cum in any type of soil, getting out, returning fillimg in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm thick watering and well ramming and removing surplus soil to a distance n, exc 50m and making good surface.
M&L for Cement concrete 1:2:4 using 40mm graded stone aggregate as in foundation, filling and mass concrete etc, complete all as specified and directed.
S&F MS Post and structs in fencing including cutting tops to shaps as dircted, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh) including all necessary drilling, bolting or riveting etc and similar work conferming to Fe-290 Gde E-165complete all as sepcified and as directed.
S&F for Chain link MS galvanised fencing of wire mesh size 50 mm x 50 mm all as specified
S&F MS round bar 10 mm dia as in strands for holding chain link fencing incl hooking etc complete all as specified and directed.
S&F Mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and dia of neck 11mm to 15mm all as sepcicied and directed
S&F Galvanised 2 strand steel barbed wire 2.24mm dia, barbed with 2.00 mm dia barbs at 75mm spacing, straining and fixing to any standard rails and straining bolts incl securing or typing at crossing with and provisions of galvanised mild steel wire stapples or steel pins etc all as specified.
M&L for Concetrina coil securing or tying incl provn of MS wire stapples or steel pins etc all as specified & directed.
M&L preparation of newly surface of iron/ steel with synthetic enamal paint over a coat of red oxide primer etc complete.
M&L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable all as specified in clause 19.75 of MES Schedule part-I (2009) Note : Sand shall be fined sand as specifed and punned thickness shall be measured and paid.
Supply and laying sub class 'B' bricks of old size (standard size as per local availability) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge
Supply and lay cable XLPE armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts gradeof sizes 10 Sqmm 4 core Note: Earth work ( Excavation, Returning & refilling and removal), sand cushining , cable protection cover, GI protection pipe shall be measured and paid for seperately under respective item of Schedule.
Surface excavation n. exc 30cm deep & averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Supply good earth fit for vegetation and spreading/leveling the same as required at site mixed with manure or sludge in the required ratio, flooding with water, dressing including removal of rubbish with all leads and lifts (cost of manure/sludge to be paid for separately) to the satisfaction of Engr-in-Charge and complete all as specified and directed.
Supply and stacking sludge at site dump manure from approved source (manure mensuretion stacks will be reduced by 8% for payment) complete all as specified and directed.
Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.
M/S TARSEM CHAND AND SONS
kay gee construction co
M.B TUBE AND ALLIED IND. Contr
malghotra construction co
VIJAY CONSTRUCTION CO
Jay Ann Construction Company
jagdambe traders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .