Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹18.2 LAccepted-AOC R O ABI GUZAR THE BUND SRINAGAR 190001 J K | SRINAGAR | JAMMU AND KASHMIR | 190001 | L-1 | Accepted-AOC BEING L-1 | |
| 2 | L-2₹18.7 L+₹48,861.76 (2.69%)Rejected-Finance C O S 1 ESS GEE COMPLEX NEAR J K BANK SONAWAR BAZAR B B CANTT SRINAGAR 190004 J K | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190004 | L-2 | Rejected-Finance NOT BEING L-1 | |
| 3 | L-3₹18.8 L+₹65,485.99 (3.60%)Rejected-Finance RAWALPORA WANABAL PATI YAYIL POST OFFICE SANAT NAGAR SRINAGAR 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | L-3 | Rejected-Finance NOT BEING L-1 | |
| 4 | L-4₹18.8 L+₹65,653.94 (3.61%)Rejected-Finance R O KHREW TEH PAMPORE DISTT PULWAMA PIN 191103 J K | PULWAMA | JAMMU AND KASHMIR | 191103 | L-4 | Rejected-Finance NOT BEING L-1 | |
| 5 | L-5₹20.1 L+₹1.9 L (10.4%)Rejected-Finance | L-5 | Rejected-Finance NOT BEING L-1 |
Tender Value
₹22.5 L
EMD Value
₹45,000
Closing Date
27 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 861 EWS
GE 861 EWS c/o 56 APO
PROVN OF CHEQUERED TILE PATH AT ASC PET ENTRANCE GATE AT ASC PET 01 X OFFICER TOILET LADIES AT MAIN OFFICE OF ASC BN MT AND SMALL ARMS SECTION OF TPT WKSP COY AT KHUNMOH UNDER GE 861 EWS
2023_MES_625768_1
GE 861 EWS-56/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE 861 EWS
As per Tender Documents
7 documents required · 7 mandatory
₹500
GE 861 EWS
₹45,000
Yes
25 Jan 2024
30 Oct 2023
4 Dec 2023
30 Oct 2023
27 Nov 2023
13 Nov 2023
Amount
M&L for surface dressing n exc 15cm deep all as specified and directed
M&L for surface excavation nexc 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil all as specified and directed
M&L for surface excavation nexc 30 cm deep and averaging 15cm deep and getting out in hard/ dense soil all as specified and directed
M&L for excavation in trenches not exe 1.50 mtr wide and n exc 1.5m in depth for foundation, cesspits, manholes, sewage line etc and getting out in hard/dense soil as directed
Excavation in trenches n.exe 1.5m wide and n.exe 1.5m deep for laying pipe line incl getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches not exe 1.50 mtr wide and n exc 1.5m in depth for foundation, cesspits, manholes, sewage line etc and getting out in hard rock soil as directed
M&L PCC 1:4:8 type D2 using 40mm graded stone agg as in foundation, filling and mass concrete all as specified and directed
M&L for RCC M-30 (Design mix) in foundations, including rafts footings, foundation beams, plinth beams, bases for column etc : basement slabs under-reamed piles and mass concret all as specified and directed
M&L for RCC M-30 (Design mix) in column, pillars, piers, post and struts all as specified and directed
M & L for RCC M-30 (Design mix) slabs supported on wall, beams and coulumns in floors, roofs, landings, balconies, canopies deck slabs and in shelves and the like all as specified and directed
M&L for RCC M-30 (Design mix) as in beams, cantilever, lintels over 1.5m span all as specified and directed
M&L for fomwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work for rough finished; concrete surfaces all as specified and directed
M&L for fomwork to sides and soffits of floor or roof beams, beam haunchigs, girders, bressummers, lintels, cantilevers, shelves indluding supports, overhangs, etc also splays between floors and beams, etc. for rough finished ;concrete surfaces all as specified and directed
M&L for form work to soffits or suspended slabs such as roof slabs,/shelves floor slabs etc ,landing ans similar work, not exe 200mm thick (horizontal or sloping ) for fair finish surface all as specified and directed.
M&L for TMT 10mm dia and over cut to length bent to shape required including cranking bending spirally for hoping columns hookings ends binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed
M&L for TMT 6mm dia to 8mm and over cut to length bent to shape required including cranking bending spirally for hoping columns hookings ends binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed
M&L for TMT 5mm dia and over upto and including 10mm dia in stirrups spaces and binder all as specified and directed
M&Lfor old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified.
M&L for old size brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in built in CM 1:4 complete all as specified.
M&L for rendering 15mm thick in cement plaster on fair faces of brick work or concrete surfaces in cement mortar of 1:4 and surfaces finished even and smooth complete all as specified and directed.
M&L rendering 15 mm thick in cement Mortar 1:4 using WPC @3% wt of cement , on fair faces of brick work or concrete surfaces of walls and surfaces finishined even and smooth without using extra cement complete all as specified and directed .
Supply only water proofing compound
M&L preparation of newly plastered surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over a coat of priming coat with alkali-resistant primer complete all as specified and directed
M&Lfor 3mm thick white wall care putty in two coat and suface finished even and smooth with sand paper of complete all as specified.
M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub-base finish even and fair complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in levelled couse finish even and fair for tile finishes specified and directed.
M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including wateringand rolled/rammed to a true surface comlete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone agg) as in plinth protection,surfaces finished even and smooth without using extra cement laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight complete all as specified and directed
M&L for returning, filling in incl spreading, levelling, watering and well ramming in layers n exc 25 cm thick all as specified and directed
M&L for removal of surplus soil n exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as specified and directed
S&F roof trusses (framed), trussed, purlins,crane gantries, rails and fastnings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to Fe-290 Gde E-165.
S&F 10mm thick MS Plates (plain or chequered) square cut or notched (ordinary and counter sunk) forming holes,weldied incl all necessary bolting or riveting etc with roof trusses complete all as specified.
S&F for flat iron fillets 40x6 mm thick wind ties for roof covering securing with bolts etc including all necessary drilling, bolting or riveting etc.and similar work conforming to Fe 290 gde E 165 complete all as specified and directed.
S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to gabble sides/wall, fixed with self tapping machine GI screws full threaded all as specified
S&F for 0.63 thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified
S&F for anodised aluminium snap grid of size 605 x605 mm frame work for false ceiling including straining with GI wire 4 mm thick all as specified.
S&F for 10 mm thick PVC insulation panels with EPS stuck to 1 mm thick plain PVC sheet suitably placed in false ceiling grid made of aluminum GI/MS as per specification and drawing complete.
M&L for 20 to 25mm thick machine cut Kota stone (550 x 550 mm) flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and polishing complete all as specified over and including 20mm thick screed bed in CM 1:6 complete all as specified.
All as per item No 39 here-in-before but, kota stone slab (100/150mm x 550mm) and 20-25mm thick in riser of steps, skirting , dados and pillar laid over and including 10mm thick rendering to receive the stone in cement mortar 1:3 and jointed complete all as specified.
S & F IInd class hard wood 35mm thick factory made plain framed paneled shutter (two number of panel) with lock rail and pannel of 9mm BWP commercial ply or 12mm veneered particle board with commercial faces on both faces the size of rails and stile as per IS-1003 (Part-1)kline seasoned and chemically pressure treated .
S & F IInd class hard wood glazed and skelton shutters 35mm thick prepared to received guage etc.(divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, any numbers) edges of framing plainchamfered or rounded fitted with cut and mitred beads for securing glass or guage etc.Size of members of shutters as per SSR Part-I Section VIII clause 8.24(a) complsete all as specfied .
S&F box type steel windows with side hung shutters including projection type hinges with steel handle, tower bolt and steel peg stay, complete with glazing bars dovetailed or welded all as specified.
S&F box type steel windows with side hung shutters including projection type hinges with steel handle, tower bolt and steel peg stay, complete without glazing bars dovetailed or welded all as specified.
S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete
S&F pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.
M&L cement concrete 1:3:6 type C1 filling of pressed steel frame and hold fast block etc.
S&F aluminium alloy, anodised, sliding door bolt of length 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed
S&F aluminium anodised barrel tower bolts extruded section of size 150 mm long , all as specified and directed
S&F aluminium handle extruded febricate type anodised of size 150 mm complete all as spd and directed.
S&F for butt hinges 100mm medium weight cold rolled mild steel.
S&F for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed
S&F 3mm thick sheet glass of ordinery quality and glazing with oil putty in nexc 0.5sqm each in pane
S&F galvenised mild steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm all as specified and directed
S & F for figured glass, pin head type 4mm thick, ordinary quaility, not exceeding 0.5 Sqm in each pane and glazed with oil putty in square all as specified and directed.
M&L for mild steel bars as in window guard bars incl necessary welding and a shop coat of zinc primer, confirming to Fe-310-O or Fe-410-O.
Preparation of new or untreated wood or wood based surfaces of any description exc.10 cm. in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.
M&L for two coats of synthetic enamel paint and a coat of red oxide primer on steel Surfaces of any description, over 10cm in width or girth , not other wise described, including preparation of new surface.
M&L for 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded aggregate ) as in sub base for receiving floor finishes etc. complete all as specified and directed.
M&L for chequerd cement concrete tiles glossy finished 20cm x20cmx25mm th with grey cement and pigment , set , jointed and pointed in neat cement slurry in floors laid over 15 mm thic screeed bed in cm 1:6 all as spd & direted.
M&L PCC type B-0, 1:2:4 (using 20mm graded aggregate) as in coping ,benching, haunching including all necessary form work.
M&L for RCC M-25 (Design mix) in foundations, including rafts footings, foundation beams, plinth beams, bases for column etc : basement slabs under-reamed piles and mass concret all as specified and directed
M&L for RCC M-25 (Design mix) as in column, pillars, piers, post and struts all as specified and directed
M&L for RCC M-25 (Design mix) as in beams, cantilever, lintels over 1.5m span all as specified and directed
M&L for fomwork to sides of pillars, posts struts, piers, columns ans stranchions etc. with rough finished complete specified and directed
S&F framed work as in doors or gates of angle or other section with gusset plate ,rails braces etc. complete drilling for fixing of steel sheeting , hanging, fastening and fixing in complete specification.
M&L for rendering 5 mm thick in cement Mortar 1:4 on fair faces of brick work or concrete surfaces of walls and surfaces finishined even and smooth without using extra cement complete all as specified and directed .
M&L for rendering 10mm thick cement plaster on other than of brick work or concrete surfaces in cement mortar of 1:6 and surfaces finish even and smooth complete all as specified and directed.
M&L for non - skid coloured (joints free) ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including cement screed bed 15 mm thick in cement mortar (1:4) laying floor finish complete all as specified and directed.
M&L for glazed ceramic dark shade glossy tiles coloured of size 300mm x450mmx7mm th on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over 10mm thick readering in cement mortar (1:4) complete all as specified and directed. all as specified and directed by Engr-in-charge.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5 mm single side prelam PVC sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawings.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and gap isert for top rail and bottom rail paneling of plain colour PVC to sheet to be fitted in the MS frame welded / sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement.
S&F aluminium anodised barrel tower bolts extruded section of size 100 mm long , all as specified and directed
S&F aluminium handle extruded febricate type anodised of size 100 mm complete all as spd and directed.
S&F for butt hinges 75mm medium weight cold rolled mild steel.
S&F in floor stainless steel gratings, 125mm dia
S&F 15mm bore GI tubing medium grade with all fittings fixed to walls ceiling or laid in trenches.
S&F 20mm bore GI tubing medium grade with all fittings fixed to walls ceiling or laid in trenches.
Supply and fixing grating doom 125mm dia with waste hole of PTMT weight not less than 40gms
S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in trenches or in floors
S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in trenches or in floors
S&F PVC (SWR) bends 110 mm bore.
S&F PVC (SWR) bends 75 mm bore.
S&F 75mm PVC (SWR) vent cowl
S&F 15 mm bore fancy type CP bib taps cast copper alloy with crutch or butterfly nuts with chromium plated , handle, screwed down for iron pipe.
S&F 15 mm bore CP stop/angle valve cost copper alloy screwed down , high pressure with crutch or butterfly handle fency type complete.
S&F vitreous china wash down water closet pan ( pedestal pattern ) white complete including ‘P’ or ‘S’ trap , seat cover and fixing to flushing cistern, brackets, flushing pipe etc complete all as specified.
S&F 10 ltr capacity PVC flushing cistern valveless syphonic action type low level with inlet ball valve float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia.
S&F vitreous china wash basin white flat back size 550 x 400mm size, incl cutting for and pinning in ends of brackets or erecting stand but including of fixing of supply and waste pipe and 15mm pillar tap cast copper alloy with capstan head chromium plated complete.
S&F for 100 cast iron sanitary conncetion socket to fit WC outlet complete all as specified.
S&F for PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement
S&F for Rotational moulded polythylene 500 liters capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20 mm ball valve high pressure of PTMT with epoxy coated alu rod & high density plastic ball complete all as specified
S & F for gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed for bore of pipe 20mm.
S&F 15 mm size PVC connection with PTMT nuts of 600 mm long.
M&L 150 mm dia reinforced concrete pipes, class NP-2 laid and jointed complete with coller all as specified. etc all as specified.
Cutting into existing manholes for connecting new drains 150 mm dia, making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, & reforming benching as required.
M&L for precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab for Man holes/Septic tank set in CM 1:4.
M&L for concealed point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, drawn through and including non metalic rigid PVC Conduit not less than 25mm with all accessories fixed on wall//ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of Sunken box/ hylem sheet fixed on wall for fixing the switches, switch sockets,sockets, regulators etc complete all as specified for One light/Fan point controlled by one 5A switch including making good the disturbed surfaces of walls to existing specification completed all as specified and directed. Note: (a) Colour coding shall be followed as given below:- (i) Phase - Red/Yellow/Blue (ii) Neutral - Black (iii) Earth - Green (b) Electrical wiring above false ceiling shall also be drawn through medium grade PVC conduit.
All as per item No 99 here-in-before but, one 3/5 pin, 5/6Amps flush type switch socket point on same board board.
All as per item No 99 here-in-before but, one 3/5 pin, 5/6Amps flush type switch socket point on independent board.
M&L for concealed point wiring complete with proper colour coding using PVC insulated unsheathed multistranded copper conductor cable 2.5 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, not less than 25mm PVC condiut with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including sunken box/ hylem sheet in any module complete for One 5 pin, 15A switch socket combination on the independent board complete all as specified and directed.
S&F ceiling rose, surface back light 65 x 40mm flush type, 3 terminals complete all as specified and directed by Engr-in-Charge.
S&F switch piano flush type single pole one way ,5/6 Amps complete all as directed.
Supply and fix switch sockets combination 3/5 pin, 5/6Amps flush type 240 Volts AC complete.
Supply and fix switch socket combination 2 in 1, 3 pin, 5 & 15 Amps flush type universal controlled by one switch flush type 230 Volts AC complete.
S&F lamp holder PVC/polycarbonate insulated body type complete all as directed.
Supply and fixing LED 9watt pin type bulb complete all as specified and directed by Engr-in-Charge.
Supply and fixing new generation walll/surface mounted 20W LED batten fitting, 220V AC, 4 feet surface mounted provides high quality ecomonic energy saving lighting complete with all accessories internally pre-wired and including fixing the fitting on wall/ceiling with suitable PVC round/square block-02 Nos including connecting up with three core flexible copper conductor cable with suitable size and all as directed by Engr-in-Charge.
S&F of double door type SPN DB 8 Way ,230V with 100A copper busbar each phase , with metalic double door type IP-43 IK 09 protection suitable for housing MCB's all as specified and directed by Engr-in-Charge. Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.
S&F double door type SPN DB 4 Way ,240V with 100A copper busbar each phase , with metalic double door type IP-43 IK 09 protection suitable for housing MCB's all as specified and directed by Engr-in-Charge. Note : MCB DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.
S&F MCB SP 6-32 Amps,10KA, 'B' series 240V complete all as specified and directed.
S&F MCB SPN 32 Amps,10KA 'C' series 240V complete all as specified and directed.
S&F of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 250V, 50 Hz, RPM 1200, Copper winding of sweep 230mm complete fixing, cutting and making good existing surface to match all as directed by Engr-in-Charge.
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.
Supply& Fixing ceiling fan 1200 mm sweep ,copper winding, double ball bearing with aluminium blade set of 3, length of down rod not less then 300 mm, single phase , 240 volts ISI marked , incuding connection with three core copper wire etc complete all as specified and directed by engr-in-Charge.
S & F fan regulator electronic dimmer, 450w,230V flush type and making all necessary connections complete all as directed.
Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen?ded by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular 10Sqmm 2Core complete all as specified and directed.
Material and Labour for Earthing complete with MS plate electrode of size 600 X 600 X 6 mm buried directly and preferably vertically in ground (earth pit not less than 2.25 mtrs deep below ground level ) with top edge of the plate not less than 1.5 Mtrs below ground level, connected to connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electricalNo. 3 of SSR Part-I, connected to Earthing test point including earth work, 1:3:6 C1 PCC chamber, 1:2:4 B1 PCC cover with 8 mm dia steel bars at 100 mm C/C suitable size of GI pipe for earth lead protection and watering, water funnel etc. complete all as specified and directed.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 Sqmm 2 Core nominal cross section in service connections, complete all as specified and directed.
Supply and fixed gate valve 20 mm screwed complete all as specified and directed.
M&L for cutting existing CI/GI pipe line of 40 mm to 100mm dia and inserting tee and tapping new connection with all accessories complete all as specified and directed.
M&L lagging to pipes used in external water supply of plumbing all around with 25mm thick bonded mineral wool pre-formed. SNAPON pipe section of density 144 Kg/Cum conforming to IS-9842 or equivalent and provided chicken wire mesh netting 25gauge 20mm meshing and plaster of Peris 3 to 5 mm thick all around the mesh after breaking old unsv/ broken lagging all as specefied and directed by Engineer in charge for the 20mm GI tubing.
M/S A.N CONSTRUCTIONs
FIRDOUS AHMAD BABA
M/S SHEIKH FEROOZ AHMAD
M/S MAHIR MUNEER
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .