REPAIR/MAINT OF EXTERNAL/INTERNAL ELECTRIFICATION INCLUDING LIGHT FITTING AND FIXTURE AND OTHER CONNECTED WORK OF PARACHUTE BLDG AND TECHNICAL AREA AT ADRDE AGRA UNDER GE I RnD DELHI

Amount

Supplying, laying, jointing & testing of 11000 volts grade, heavy duty, HT XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed, 3 Core, 185 Sqmm nominal cross-section in service laid in loops/ducts, along wall /pole or under floor /road or laid in trenches connections including taking out old unserviceable cable complete all as specified and directed.

Supplying, laying, jointing & testing, in replacement of 1100 volts grade, heavy duty, LT XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed, 3.5 Core, 240 Sqmm nominal cross section in service connections laid in loops /ducts, along wall /pole or under floor /road or laid in trenches including taking out old unserviceable cable complete all as specified and directed.

All as per item Srer No. 2.00 above but 185 Sqmm 3.5 Core.

All as per item Srer No. 2.00 above but 150 Sqmm 3.5 Core.

All as per item Srer No. 2.00 above but 95 Sqmm 3.5 Core.

All as per item Srer No. 2.00 above but 50 Sqmm 3.5 Core.

All as per item Srer No. 2.00 above but 35 Sqmm 3.5 Core.

Supply and spread clean dry sand for cable cushioning in trenches all as specified in clause 19.75 of SSR Part-I complete all as specified and directed. Note :- Punned thickness shall be measured.

M&L for brick, subclass 'B' well burnt, laid dry flat in trenches for protection of cable with a maximum gap of 10 mm between two consecutive brick over LT cable complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide & not exceeding 1.5 m in depth and getting out in soft/loose soil for foundation, LT cable, HT cable etc including leveling and ramming complete all as specified and directed.

Returning, filling in trenches soft/loose soil, including spreading leveling & well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated surplus soil to a distance n.exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

S&F in replacement GI tube light grade 80mm bore including all new fittings, laid in trenches/wall for protection of UG cable complete all as specified and directed.

All as per item Ser No 13.00 above but size 40 mm bore .

All as per item Ser No 13.00 above but size 50 mm bore .

M&L for boring of holes by manually / machine under road, pavement, hard standing by trenches for laying of 40/50/80 mm GI pipe for cable laying complete all as specified and directed. Note: GI pipe will be measured and paid seperately under respective item.

S&F in repair cable jointing kit for 11 KV (earthed) grade cable, for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 Core XLPE armoured aluminium conductor cable of 185 Sqmm complete all as specified and directed.

S&F in repair Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 185 Sqmm complete all as specified and directed.

S&F in repair cable jointing kit for 1.1 KV (earthed) grade cable for end joint Heat shrink type joint complete with jointing material and accessories suitable for 3.5 Core XLPE armoured aluminium conductor cable of 185 Sqmm complete all as specified and directed.

S&F in repair cable jointing kit for 1.1 KV (earthed) grade cable for end joint Heat shrink type joint complete with jointing material and accessories suitable for 3.5 Core XLPE armoured aluminium conductor cable of 150 Sqmm complete all as specified and directed.

S&F in repair cable jointing kit for 1.1 KV (earthed) grade cable for end joint Heat shrink type joint complete with jointing material and accessories suitable for 3.5 Core XLPE armoured aluminium conductor cable of 50 Sqmm complete all as specified and directed.

S&F in repair cable jointing kit for 1.1 KV (earthed) grade cable for end joint Heat shrink type joint complete with jointing material and accessories suitable for 3.5 Core XLPE armoured aluminium conductor cable of 95 Sqmm complete all as specified and directed.

S&F in repair Copper lugs, E-blot size 10.5 mm, suitable for 25 sqmm 3.5 core to 240 sqmm 3.5 core cable including crimping/ connecting with UG cable and panel board complete all as specified and directed.

Supply ,installation, testing and commissioning of canopy headed HT 11K volt grade, 3 phase, AC, 50 cycle, feeder pillar box size 1200x1000x1000 mm, factory made outdoor pedestal type double door, fabricated out of 3.15 mm thick CRCA sheet with powder coated painting in side and outside of approved shade, locking arrangement with duplicate keys two earthy terminal suitable cable gland for all incoming and outgoing cable grouting of feeder pillar box 15 cm above ground level by providing 90 cm long angle iron of size 50x50x6 mm welded on all the four corners embedded in PCC (1:2:4) using 20 mm graded stone aggregate upto 30 cm deep and 45 CM above from normal ground level complete all as specified and directed including the following components:- (a) The panel will be having copper bus bar of size 400×40×6 mm 03 strips with porcelain HT long post insulator. Note : HT Feeder pillar will be from CPRI Approved firm.

Material and Labour for earthing complete with iron earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron strip of 32x6 mm by means of Copper nuts, bolts and washers. Strip laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion :- (a) GI strip of size 32mm x 6mm. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel bar 75mm centre to centre with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover.

Material and Labour for earthing complete with Steel earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron earth wire 4.00 mm dia by means of Copper nuts, bolts and washers. GI wire shall be laid in 20 mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion :- (a) GI wire of 4 mm dia. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel TMT bar 75mm centre to centre with 2 Nos MS handles of 12mm dia mild steel TMT bars suitable for carrying of pit cover.

S&F in repair on load change over switch including enclosure, 125 Amp, 4 pole with advance neutral including making cable connection to the change over switch, fixing on wall/ floor with mild steel fastener, nut/bolts complete all as specified and directed.

S&F in repair on load change over switch including enclosure, 400 Amp, 4 pole with advance neutral including making cable connection to the change over switch, fixing on wall/ floor with mild steel fastener, nut/bolts complete all as specified and directed.

S&F in repair on load change over switch including enclosure, 630 Amp, 4 pole with advance neutral including making cable connection to the change over switch, fixing on wall/ floor with mild steel fastener, nut/bolts complete all as specified and directed.

M&L for filtration/dehydration transformer oil of transformer capacity 800 KVA indoor/outdoor type, pole mounted / plinth mounted in situ to achieve dielectric strength min 35 KV at 4mm gap complete all as specified and directed.

M&L for topping up/replacement of transformer oil with new transformer oil suitable for working voltage 11000 volts grade including necessary dehydration to achieve dielectric strength min 35 KV at 4mm gap complete all as specified and directed. Note for ser item No 29&30 :- (a) New transformer oil to be bought in company sealed ISI marked container with original test certificate. (b) Filtration /dehydration of transformer oil shall be carried out at the location where transformer is installed and necessary filter/dehydration plant having pressure gauge, hour meter, temperature gauge to be brought at site by contractor

M&L for silica gel grain in the breather assembly of transformer complete all as specified and directed

M&L LT bush insulator complete with outer bushing studs made out of brass including oil seal, gaskets as per existing sample for indoor/outdoor type transformer of cap 800 KVA (set of four) including taking out the old unserviceable bush insulator complete all as specified and directed.

M&L HT bush insulator complete with outer bushing stud, made out of brass including oil seal, gaskets as per existing size for indoor/outdoor transformer of cap 800 KVA for 11K/440 Volts including taking out the old unserviceable bush insulator complete all as specified and directed .

S&F Packing gasket for top cover and terminal box for HT and LT side as per existing sample for out door/indoor type transformer including nuts, bolts and washer etc all as specified for 800 KVA transformer (after draining out transformer oil and refilling to the same transformer) complete all as specified and directed. (a) Cost of minor spares i.e. nut bolt and washer if required to complete the job is deemed to be included in quoted rates.

M&L for painting of transformer outer surface with one coat of synthetic enamel paint for transformer capacity 800 KVA after preparation of old painted surface using spray machine complete all as specified and directed. Note:- (i) After completion of painting HT/LT bushing, oil inspection glass and name plate to be made clean using volatile cleaner complete all as specified and directed.

Maintenance /repair and overhauling of DG set of capacity 400 KVA on every month including checking, cleaning, adjusting/tightening, oiling, greasing and reseting of existing part decarbonising of battery terminals of DG set at different location of installation and keep ready to set for proper functioning of valve 'V' belts pulleys, fan hub, idler, water pump, fiters engine cylinder head, bolts, nuts and washers vibration dampers, coupling, alternator terminals, carbons brushes vibration dampers, springs, AVRs exhause pipes etc of following capacity of DG sets :- Note : Spares part will be measured and paid separetely under respective item of BOQ.

Supply only Air Filter suitable for 400 KVA DG Set complete all as specified and directed.

Supply only Oil Filter suitable for 400 KVA DG Set complete all as specified and directed.

Supply only diesel filter suitable for 400 KVA DG Set complete all as specified and directed.

Supply only Water separator suitable for 400 KVA DG set complete all as specified and directed.

Supply only Coolant complete all as specified and directed.

Supply only Engine oil complete all as specified and directed.

Disconnecting connection of radiator and taking down for servicing and cleaning and refixing complete all as specified and directed.

Supply, fixing and testing of maintenance free battary 12 Volts 180 AH of DG Set including taking out old unserviceable battery complete all as specified and directed.

Supply, fixing and testing of maintenance free battary 12 Volts 150 AH of DG Set including taking out old unserviceable battery complete all as specified and directed.

Taking down old unserviciable Automatic voltage regulator from DG Set and supply, fixing and testing of new Automatic voltage regulator suitable for DG Sets of capacity 400 KVA complete all as specified and directed.

S&F in repair flexible rubber coupling of engine and alternater with bolts and nuts etc of suitable size complete all as specified and directed for 400 KVA Capacity.

Taking out FIP from DG set and transporting up to nearest workshop for calibration including calibration of FIP from authorized workshop, transporting back, refixing the same in DG Set including testing for smooth functioning complete all as specified and directed for the 400 KVA Capacity

Taking out old unserviciable battery from UPS including supply, fixing and testing of maintenance free battary 12 Volts VRLA 42 AH complete all as specified and directed.

Supplying, laying, jointing & testing of 1100 volts grade, heavy duty, LT XLPE cable with PVC insulated copper conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed,3.5 Core, 25 Sqmm nominal cross section in service connections laid in loops /ducts, along wall /pole or under floor /road or laid in trenches including taking out old unserviceable cable complete all as specified and directed.

All as per item Ser No. 51.00 above but 10 Sqmm 4 Core.

All as per item Ser No. 51.00 above but 6 Sqmm 4 Core.

All as per item Ser No. 51.00 above but 4 Sqmm 4 Core.

S&F 6 mm dia aluminium round conductor on surface or wall or parapet in horizontal position including connections using suitable jointing material and fixing using fixing bracket as per existing sample including taking down old unserviceable complete all as specified and directed.

S&F 3 mm dia aluminium round conductor on surface or wall or parapet in vartical position including connections using suitable jointing material and fixing using fixing bracket as per existing sample including taking down old unserviceable complete all as specified and directed.

S&F air termination made of 16 to 20 mm dia and 300 mm long as per existing sample including taking down old unserviceable complete all as specified and directed.

S&F factory made 25 A,3 Phase +N+E interlocked switch with 32 amps 4 pole MCB and plug top as per existing sample including taking down old unserviceable complete all as specified and directed.

S&F factory made 40 A,3 Phase +N+E interlocked switch with 40 amps 3 pole MCB and plug top as per existing sample including taking down old unserviceable complete all as specified and directed.

S&F factory made 40 A,3 Phase +N+E interlocked switch with 40 amps 4 pole MCB and plug top as per existing sample including taking down old unserviceable complete all as specified and directed.

S&F factory made 63 A,3 Phase +N+E interlocked switch IP 67 with 63 amps 4 pole MCB and plug top as per existing sample including taking down old unserviceable complete all as specified and directed.

S&F in reparis New generation energy saving and environmental friendly long life LED street light fitting 40 Watt,made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 complete all as specified and directed.

S&F in repairs LED Energy saving, environment friendly, long life, exclusive innovative die-cast aluminium flood light 195 Watt, with highly efficient LEDs as light source, suitable for highlighting architectural features or retail spaces complete all as specified and directed.

S&F in replacement earth continuity conductor or main earthing lead 50 mm x 5 mm copper strip/earth lead laid in pipe/fixed on walls or any other position including jointing by tinned copper/ brass nuts bolts and washers in addition to brazing at every joint complete all as specified and directed.

S&F in replacement earth continuity conductor or main earthing lead 25 mm x 5 mm GI strip/earth lead laid in pipe/fixed on walls or any other position including jointing by welding GI nuts bolts and washers in addition to welding at every joint complete all as specified and directed.

S&F MCCB 4P 630 Amps 50 KA with rotory handle microprocessor based suitable with to fit in panels with existing frame size without any alteration to panel suitable to fit in existing schneider make CVS model MCCB including taking out the old MCCB complete all as specified and directed.

S&F MCCB 4P 400 Amps 50 KA with rotory handle microprocessor based suitable with to fit in panels with existing frame size without any alteration to panel suitable to fit in existing schneider make CVS model MCCB including taking out the old MCCB complete all as specified and directed.

S&F MCCB 4P 250 Amps 50 KA with rotory handle microprocessor based suitable with to fit in panels with existing frame size without any alteration to panel suitable to fit in existing schneider make CVS model MCCB including taking out the old MCCB complete all as specified and directed.

S&F MCCB 4P 200 Amps 50 KA with rotory handle microprocessor based suitable with to fit in panels with existing frame size without any alteration to panel suitable to fit in existing schneider make CVS model MCCB including taking out the old MCCB complete all as specified and directed.

S&F MCCB 4P 160 Amps 50 KA with rotory handle microprocessor based suitable with to fit in panels with existing frame size without any alteration to panel suitable to fit in existing schneider make CVS model MCCB including taking out the old MCCB complete all as specified and directed.

S&F MCCB 4P 400 Amps 35 KA with rotory handle microprocessor based suitable with to fit in panels with existing frame size without any alteration to panel suitable to fit in existing schneider make CVS model MCCB including taking out the old MCCB complete all as specified and directed.

S&F MCCB 4P 250 Amps 35 KA with rotory handle microprocessor based suitable with to fit in panels with existing frame size without any alteration to panel suitable to fit in existing schneider make CVS model MCCB including taking out the old MCCB complete all as specified and directed.

S&F MCCB 4P 200 Amps 35 KA with rotory handle microprocessor based suitable with to fit in panels with existing frame size without any alteration to panel suitable to fit in existing schneider make CVS model MCCB including taking out the old MCCB complete all as specified and directed.

S&F MCCB 4P 160 Amps 35/25 KA with rotory handle microprocessor based suitable with to fit in panels with existing frame size without any alteration to panel suitable to fit in existing schneider make CVS model MCCB including taking out the old MCCB complete all as specified and directed.

S&F MCCB 4P 63 Amps 35/25 KA with rotory handle microprocessor based suitable with to fit in panels with existing frame size without any alteration to panel suitable to fit in existing schneider make CVS model MCCB including taking out the old MCCB complete all as specified and directed.

S&F MCB TPN 63 Amp,C curve, 415 Volts, 50 Hz suitable for existing and connection with copper lugs including taking down old unserviceable complete all as specified and directed.

S&F MCB TPN 32 Amp,C curve, 415 Volts, 50 Hz suitable for existing and connection with copper lugs including taking down old unserviceable complete all as specified and directed.

S&F MCB SPN 32 Amp,C curve, 415 Volts, 50 Hz suitable for existing and connection with copper lugs including taking down old unserviceable complete all as specified and directed.

S&F MCB SP 6-32 Amp, 415 Volts, 50 Hz suitable for existing and connection with copper lugs including taking down old unserviceable complete all as specified and directed.

S&F in repair LED indicating lamp as per existing size ( R,Y or B) complete all as specified and directed.

S&F in repir KWHR electronic dual reading type suitable to read power and energy with class accuracy 1.0 suitable with to fit in panels with existing frame size without any alteration to panel suitable to fit in existing make schneider EM6438 complete all as specified and directed.

S&F in repair 3 phase ammeter with class accuracy 1.0 suitable with to fit in panels with existing frame size without any alteration to panel suitable to fit in existing complete all as specified and directed.

S&F in repair 3 phase voltmeter with class accuracy 1.0 suitable with to fit in panels with existing frame size without any alteration to panel suitable to fit in existing complete all as specified and directed.

Over hauling/maint/repairs to flame proof EOT crane 10 Ton capacity/hoist of 1 Ton on gantry SWL, floor/ cabin operated of (a) Dismantling and taking down all major assy of crane such as longitudinal travel system assy, cross system travel assy, Hoisting system assy, except track if required from gantry for repair/ replacement unserviceable spares. The repaires compromising the following shall be carried at :- (i) Cleaning, checking, repairing/servicing and setting of electromagnetic breaking system. (ii) De-rusting, cleaning, drying of all travel tracks incl removing splashed oil, birds waste, cheking and setting right allingement including tightning of all foundation bolts and providing one extra lock nuts to each bolts all as specified and directed by engineer-in-charge. (iii) Inspection, check and setting rights, cross travel trolly, cross travel motor, long travel motor, hoisting motors, gear box systems, including providing grease of proper grade/viscocity including worn out spares as required. (iv) Checking/greasing setting right bearing, bushes, hoisting pully steel rope drum, rope guide etc including replacement of worn out spares. (v) Inspection check and setting right of electric control system including wiring of panel/pandent control board including redressing the wires/cables. (vi) Repair/replacement of all other misc items necessary for safe and satisfactory function of crans incl replacement of worn out spares all as directed and required at site. (vii) Reassembling all part of cranes and remounting on gantry/track as originaly fitted including replacement of worn out nuts, bolts washers split pins,keys,thimble,gasket, pinion, etc complete with lubricants of all moving parts with proper lubricants complete all as specified and directed. Note :- (I) Cost of new spares parts which ever reqd to be measured and paid separately under item 85 & 86 except nuts, bolts, washers, screws, split pins, rebates, keays, thimbles, gaskets, pinion, all kinds of lubricants (except gear oil), copper wire etc. Cost of which are deemed to included in rate quoted. (2) Wire hoist is placed at 25 Mtr Hight from Ground level and contractor shall make the arrangement to open this from this hight for servicing.

Supply only for flame proof EOT crane 10 TON capacity.

Long travel wheel bearing

Cross travel wheel bearing

Gear Oil

Hoisting contractor

E/M Break

Over load relay

Single phase preventer

Limit switch

Cable trolly

Cable trolly bearing

Wire rope for hook suitable for 10 ton load

Oil seal set

Rope guide

Push button station

Welding to long travel track joints gaps incl providing and fixing 60cm long 10mm thick MS flat two Nos for supporting the track for proper allingement completed all as specified and directed.

Supply only for wire hoist 1 TON capacity for the following :- Note :- Wire hoist is placed at 25 Mtr hight from Ground level and contractor shall make the arrangement to open this from this hight for servicing.

wire rope -10 mm( steel core 180 Kg/sqmm)

Hoist motor winding 2 HP company

M&L for removing the desert cooler from the site and re-fixing after cleaning the desert cooler body from inside and outside using sand paper to make the smooth surface including oiling and greasing of fan kit, water pump motor complete all as specified and directed.

S&F new wooden wool pad/honeycomb pad, set of three Nos,covered by GI wire mesh suitable for desert cooler including taking out the old unserviceable existing wool pad completed all as specified and directed.

M&L in replacement of old unserviceable water pumping kit of desert cooler (ISI marked) single phase, 220 AC, 15 to 18 Watt suitable for desert cooler complete all as specified and directed.

Taking down carefully unserviceable fresh air fan (Fan kit 165 watt) from desert cooler and supply and fixing new fresh air fan kit 220 Volts single phase as per exiting sample/ size and fixing in same position by providing new nut, bolts,washer, MS frame/side arms and rubber pads etc including testing complete all as specified and directed.

Taking out existing unserviceable 165 watt motor from desert cooler any size of make, rewinding with super enameled copper winding wire of same size bush,bearing,shaft and refixing in the same position complete all as specified and directed.

M&L for replacement of 3 pin plug top 5 Amp 230 V AC for connection lead of desert cooler complete all as specified and directed.

M&L for replacement of steel multi wing fan blade set, superior quality as per exiting type and size suitable for desert cooler complete all as specified and directed.

Taking down ceilling fan/exhaust/air circulating fan of any size or make by disconnecting electric connection and removing from site for rewinding,servicing, painting of fans and refixing the same position or complete all as specified and directed.

Cleaning, washing, greasing, oiling and varnishing of ceiling fan of any size and make complete all as specified and directed.

M & L for removing burnt out winding wire from ceiling fan of any make of size 1200/1400 mm sweep including cleaning of slots etc and rewinding with super enameled copper winding wire as per existing size/gauge including insulating material and varnishing complete all as specified and directed.

All as per item Ser 96.00 above but for exhaust fans of any size 200mm to 450mm sweep.

M&L for replacement of defective ball bearing for ceilling fan of 1200/1400 mm sweep size (Bearing make/size SKF-6201/6202/ or equivalent make) complete all as specified and directed.

M&L for replacement of defective capacitor of size 2.5 mfd for any type of fans suitable for 250 V including making connection complete all as specified and directed.

M&L for replacement of flexible copper conductor cable 3 core PVC insulated & PVC sheathed 1100 Volts grade size of cable 23/0.0076 complete all as specified and directed.

M&L for painting of ceilling fans any make of size upto 1400 mm at site with one coat of superior quality synthetic enamel spray paint of approved make by spraying, filling cavities with filler after preparation of surface and wirting MES No. as per existing such as with black systhetic enameled paint 1" high on both sides of fans complete all as specified and directed.

S&F in replacement of PVC canpoy suitable for 1200 mm to 1400 mm sweep ceilling fan complete all as specified and directed.

S&F Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with warm white lighting 20 watt, 50 Hz including taking down the old fitting complete all as specified and directed.

S&F round shape 15 watt 220 volts AC surface mounted with high efficiency PMMA diffuser soft glare free warm white light complete with drivers, holders, LED lamp suitable for roof eiling including connecting up with existing light point with three core flexible copper conductor cable of suitable size including taking down old fitting completed all as specified and directed.

Taking down existing unserviceable/old point wiring surface /batten excluding fitting fixtures, ceiling roses, pendant/angle holders, regulators, sockets, switches and PVC conduit complete all as specified and directed

Taking down existing unserviceable/old point wiring concealed excluding fitting fixtures, ceiling roses, pendant/angle holders, regulators, sockets, switches, excluding PVC conduit etc complete all as specified and directed

M&L for point wring ,using approved colour coding (Phase-red, Neutral-black, Earth-green) complete with FRLS PVC insulated and unshealthed stranded copper conductor cable 1.5 sqmm single core conforming to IS 694 including medium duty concealed unplasticised PVC conduit conforming to IS 9537(part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thick of required size including painting terminal boxs inside and outside with two coat of synthetic enamel paint over one coat of red oxide primer with top cover 3 mm thick bakelight laminated sheet with brass screws and Cup washer with all assessories including FRLS PVC insulated and unshealthed stranded copper conductor cable 1.5 sqmm single core in green colour as earth wire connected to earth dolly complete all as specified and directed .

One light/fan/exhaust fan point/call bell point controlled by 1 No, one way 5/6 Amp switch.

One 3 pin /5 pin socket outlet 5 Amp controlled by 1 No one way 5/6 Amp switch on same board along with other switches, fan regulator etc.

One 3 pin /5 pin socket outlet 5 Amp controlled by 1 No one way 5/6 Amp switch on independent board.

One light point controlled by two 2-way switches

M&L for point wring ,using approved colour coding (Phase-red, Neutral-black, Earth-green) complete with FRLS PVC insulated and unshealthed stranded copper conductor cable 1.5 sqmm single core conforming to IS 694 in existing conduit including FRLS PVC insulated and unshealthed stranded copper conductor cable 1.5 sqmm single core in green colour as earth wire connected to earth dolly including taking out the old wiring complete all as specified and directed . Note : PVC conduit,Pressed steel Sunk box and phenolic laminated sheet if required shall be measured and paid seperatly.

One light/fan/exhaust fan/call bell point controlled by 1 No,one way 5/6 Amp switch.

One 3 pin /5 pin socket outlet 5 Amp controlled by 1 No one way 5/6 Amp switch on independent board.

M&L for point wring ,using approved colour coding (Phase-red, Neutral-black, Earth-green) complete for one socket outlet 15 Amp on independent board with FRLS PVC insulated and unshealthed stranded copper conductor cable 2.5 sqmm single core conforming to IS 694 including medium duty concealed unplasticised PVC conduit conforming to IS 9537(part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thick of required size including painting terminal boxs inside and outside with two coat of synthetic enamel paint over one coat of red oxide primer with top cover 3 mm thick bakelight laminated sheet with brass screws and Cup washer with all assessories including FRLS PVC insulated and unshealthed stranded copper conductor cable 2.5 sqmm single core in green colour as earth wire connected to earth dolly complete all as specified and directed .

M&L for point wring ,using approved colour coding (Phase-red, Neutral-black, Earth-green) complete for one socket outlet 15 Amp on independent board with FRLS PVC insulated and unshealthed stranded copper conductor cable 2.5 sqmm single core conforming to IS 694 in existing conduit including FRLS PVC insulated and unshealthed stranded copper conductor cable 2.5 sqmm single core in green colour as earth wire connected to earth dolly complete all as specified and directed .

S&F switch piano flush button single pole two way 6 Amp, 240 Volts conforming to IS 3854 ISI marked complete all as specified and directed.

S&F switch piano flush button single pole one way 6 Amp, 240 Volts conforming to IS 3854 ISI marked complete all as specified and directed.

S&F for socket outlet, 5 Pin, 6 Amp flush type conforming to IS 1293 ISI marked including complete all as specified and directed.

S&F switch piano flush button single pole one way 15 Amp, 240 Volts conforming to IS 3854 ISI marked including taking down old one complete all as specified and directed.

S&F for socket outlet, 3 Pin, 15 Amp flush type conforming to IS 1293 ISI marked including taking down old one complete all as specified and directed.

S&F ceiling rose, surface Bakelite, isolated body three terminals complete all as specified and directed.

S&F Electronic fan regulator steped type (flush type) 240 volt ,50Hz ,single phase on existing phenotic laminated sheet one and connecting unserviceable including taking down old complete all as specified and directed.

S& F for cast iron /pressed steel terminal rectangular box 150 x 75mm, 60mm deep for mounting switches, sockets, regulator etc. with 3mm thick plastic laminated sheet cover of size rectangular complete including taking down old one complete all as specified and directed.

All as per item Ser No. 118.00 above but for size 150x150mm

All as per item Ser No. 118.00 above but for size 200x150mm

All as per item Ser No. 118.00 above but for size 200x250mm

S&F rigid medium PVC conduit of 25 mm dia exclusive of boxes out inclusive of all tees, bends, elbows, reducers, bell mouth tubes and fixing accessories such as coulers locknuts, saddles, pipe hooks of size including cutting of shape and flushed in wall where requiired and repairs complete all as specified and directed.

S&F sub main wiring using approved colour coding (Phase-red, Neutral-black, Earth-green) complete with two single core FRLS PVC insulated and unshealthed stranded copper conductor cable 6 sqmm as current carrying conductor and one run of 6.0 sqmm as earth contunity conductor ,voltage rating 1100 volt ,ISI marked drawn in and including concealed PVC conduit ISI marked of dia not less than 25 mm with standard accessories along with one run of FRLS PVC green colour insulated,unshealthed,stranded copper conductor of size 6 sqmm all as specified and directed including taking down old one Note: Two run of single core FRLS PVC cable with one run of earth contunity conductor and conduit shall be measured as one unit.

S&F in repair switch piano flush button single pole two way 6 Amp, 240 Volts conforming to IS 3854 ISI marked complete all as specified and directed.

S&F in repair switch piano flush button single pole one way 6 Amp, 240 Volts conforming to IS 3854 ISI marked complete all as specified and directed.

S&F in repair for socket outlet, 5 Pin, 6 Amp flush type conforming to IS 1293 ISI marked including complete all as specified and directed.

S&F in repair switch piano flush button single pole one way 15 Amp, 240 Volts conforming to IS 3854 ISI marked including taking down old one complete all as specified and directed.

S&F in repair for socket outlet, 3 Pin, 15 Amp flush type conforming to IS 1293 ISI marked including taking down old one complete all as specified and directed.

S&F in repair ceiling rose, surface Bakelite,isolated body three terminals including taking down old one complete all as specified and directed.

S&F in repair electronic fan regulator steped type (flush type) 240 volt ,50Hz ,single phase on existing phenotic laminated sheet including taking down old one and connecting complete all as specified and directed.

S&F in repair sheet metal enclosures (MCB Distribution board) when MCB’s to be used single pole and neutral 8 ways 220 volt with 200 amps rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces as per existing complete all as specified and directed including taking down old one.

S&F MCB single pole, 10 KA ,6 Amp to 30 Amp 240 Volts,and of ''B'' series with required wiring connections and lugs etc including taking down old unserviceable complete all as specified and directed.

S&F MCB single pole and neutal,32 Amp to 40 Amp 240 Volts,and of ''B'' series with required wiring connections and lugs etc including taking down old unserviceable complete all as specified and directed.

S&F recessed LED ceiling light 36/42 watt with wide window light window for maximum glare free output perfectely blend into grid type ceiling suitable for 600x600 mm modular grill ceiling including taking down the old unserviceable ceiling light fitting complete all as specified and direcetd.

S&F decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient, 18 watt,50 Hz including taking down the old unserviceable fitting complete all as specified and directed.

S&F bulkhead light 10 watt suitable for outdoor application including taking down the old unserviceable fitting complete all as specified and directed. Make: Havells Cat pat:RUGBYGENXFTS10WLED865SSYMBOPC or eqvt in CG/PHILIPS

S&F decorative, wall mounting, champagne gold finish fixture with plastic body suitable and including 9 W LED lamp B22 base complete including taking down the old unserviceable complete all as specified and directed. Make: Havells Cat Part No LHFOECE1TZ1O014 or equivalent in Crompton/Philips.

S&F in repair LED bulb 9 W complete all as specified and directed.

S&F in repair Lamp holder, PVC/Polycarbonate type with back plate suitable for batten complete all as specified and directed.

S&F in repair modular switch single pole one module 6 Amp complete all as specified and directed.

S&F in repair modular socket single pole two module 6 Amp complete all as specified and directed.

S&F in repair modular switch single pole one module 15/16 Amp complete all as specified and directed.

S&F in repair modular socket single pole two module 15/16 Amp complete all as specified and directed.

S&F in repair modular white cover plate with frame 4 module complete all as specified and directed.

S&F in repair modular white cover plate with frame 6 module complete all as specified and directed.

S&F in repair modular white cover plate with frame 8 module complete all as specified and directed.

S&F in repair switch socket combination 2 in 1 , 5 & 15 amps complete all as specified and directed.

S&F TPN DBs DPX3 MCCB DBs suitable for DPX3 MCCB 160 Amps as incomer and 24 Nos MCB SP as outgoing 415 Vol, 50Hz 8 way including taking down the old one complete all as specified and directed. Make: LEGRAND Cat Part No. 507745 or equivalent in L&T/HAGER/ABB.

S&F MCCB TPN 160 Amp 415 V, 25 KA ,thermal magnetic type, suitable for ICU between 80%-100%. Including connection with copper lugs including taking down old one complete all as specified and directed. Make: LEGRAND Cat Part No. 420047 or equivalent in L&T/HAGER/ABB

M/S GUPTA ENTERPRISES

LUCKY SALES CORPORATION