Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹1.5 LAdmitted-Finance MADHYA PRADESH MP | PANNA | MADHYA PRADESH | 488001 | -8.50% | ₹1.5 L | L1 | Admitted-Finance |
Updated dates
Tender Value
₹1.7 L
EMD Value
₹5,000
Closing Date
13 Feb 2026, 2:00 pmClosed
DGM (STC-STM) MORENA
O/o the DGM (STC-STM) MORENA
Estimate for P.S. to 01 No. 03 Kw. New NDLF Connection to BTS Towers USOF Project BSNL Ltd. at Village Chhitariya ka pura (Rahugoan) under Sabalgarh ( R) D/c of (OandM) Division Sabalgarh.
2026_MKVVC_479454_1
No. DGM/STC-STM/MRN/works/ E-Tender/ 3628dt- 29.01.2026
Open Tender
Electrical Works
30 days
Chhitariya ka pura (Rahugoan)
Please refer Tender documents.
3 documents required · 3 mandatory
₹236
₹5,000
Yes
23 Feb 2026
31 Jan 2026
16 Feb 2026
31 Jan 2026
13 Feb 2026
31 Jan 2026
Task Name : C-1.5 Material
11 KV AL 59 ACS Covered Conductor 78.82 sq.mm along with MVCC accessories as per EN:50397 Calculated for 1 KM Single Phase Feeder, tension/dead/anchoring clamps with piercing connector suitable for MVCC, IPC for CC to CC connection,EN-50397 -P-2
Erection cost of 11 KV AL 59 ACS Covered Conductor 78.82 sq.mm along with MVCC accessories as per EN:50397 Calculated for 1 KM Single Phase Feeder, tension/dead/anchoring clamps with piercing connector suitable for MVCC, IPC for CC to CC connection,EN-50397 -P-2
11 KV Pin Insulator Polymer Composit (5 KN)
Erection Cost Of 11 KV Pin Insulator Polymer Composit (5 KN)
11 KV Strain hardware (T&C type) fittings
11 KV(45KN) Composite Polymer Disc Insulators
Fixing of Disc Insulator with H/ W 11 KV side
140 Kg.,8.0 Mtrs. long PCC pole
Labour charge for erection of 140 Kg.,8.0 Mtrs. long PCC pole (Erection charge @60%+Transportation charge@40%)
AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.)
Erection cost of AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.)
H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-11 mtr. Long = 408.1 kg
Erection cost of material with transportation for H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-11 mtr. Long = 408.1 kg
11 KV Single pole cut point fitting 100x50x6 mm channel
Erection cost of 11 KV Single pole cut point fitting 100x50x6 mm channel
11 KV Top clamp 65X65X6 mm. angle type
11 KV V cross arm 65X65X6 mm. angle type
Fixing of 11 KV V-cross arm with Top Clamp
Aluminium Binding wire and tape
Aluminium paint
Erection cost of Aluminium paint
Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG)
Erection cost of Anti climbing Device (Barbed Wire) GS 2.24 mm Dia (14 SWG)
Back Clamp for 280 Kg PCC Pole of MS Flat 65x8mm.(Each weight 1.92 Kg)
Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg)
Back filling of poles with boulders.
Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg)
Clamp 65X8 MM of MS Flat for pcc Pole 280Kg. (Each weight 3.04 kg )
Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay
Erection cost of Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay
Concreting of structures & foundation (1:3:6).
Erection cost of Concreting of structures & foundation (1:3:6)
Danger Boards Enamelled 11 KV
Erection cost of Danger Boards Enamelled 11 KV
Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire
M.S.Nuts with Bolts
Red oxide paint
Erection cost of Red oxide paint
Stay Insulators 90X65mm
Stay set complete without Stay wire 16 mm. (Painted)
Erection cost of Stay set complete without Stay wire 16 mm. (Painted)
STAY WIRE 7/3.15 MM.(7/10 SWG)
Stone Block/Pre cast block for base pedding(450X450X75MM)
Task Name : E-1.1 Material
11 KV D.O. Fuse Unit Polymer type
Erection cost of 11 KV D.O. Fuse Unit Polymer type
11 KV Strain hardware (T&C type) fittings
11 KV(45KN) Composite Polymer Disc Insulators
Fixing of Disc Insulator with H/ W 11 KV side
11/0.4 KV Distribution transformer 25 KVA (Conventional) (Aluminium wound)(Rep-BGP)
Handling & Installation of Distribution Transformer (DTR) on DP, tightening with turn buckles on both sides, poles clamping and bolting of base jumpering on HT side
140 Kg.,8.0 Mtrs. long PCC pole
Labour charge for erection of 140 Kg.,8.0 Mtrs. long PCC pole (Erection charge @60%+Transportation charge@40%)
9 KV Gapless type ( 5KA) Polymer for DTR
Erection cost of 9 KV Gapless type ( 5KA) Polymer for DTR
AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.)
Erection cost of AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.)
PVC 2 CORE UN ARMOURED 2.5 SQMM ALUMINIUM CONDUCTOR
Single phase Electronic meter with data downloading facility & box 5-30 Amps.
Erection cost of Single phase Electronic meter with data downloading facility & box 5-30 Amps.
Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box
XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts
Aluminium paint
Erection cost of Aluminium paint
Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG)
Erection cost of Anti climbing Device (Barbed Wire) GS 2.24 mm Dia (14 SWG)
Back Clamp for 280 Kg PCC Pole of MS Flat 65x8mm.(Each weight 1.92 Kg)
Bentonite compound powder
Bi-metallic clamps Distribution Transformers Bushing
Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC
Clamp 65X8 MM of MS Flat for pcc Pole 280Kg. (Each weight 3.04 kg )
Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay
Erection cost of Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay
Concreting of structures & foundation (1:3:6).
Erection cost of Concreting of structures & foundation (1:3:6)
D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel
Erection cost of D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel
D.O.Mounting Channel 75x40x6mm
Erection cost of D.O.Mounting Channel 75x40x6mm
Danger Boards Enamelled 11 KV
Erection cost of Danger Boards Enamelled 11 KV
G.I. STRIP 25X3 MM1
G.I.Pipe 40 mm Dia C grade type
Erection cost of G.I.Pipe 40 mm Dia C grade type
Galvanized nut & bolt with washer
M.S.Nuts with Bolts
Meter cum protection box for 25 KVA DTR
Red oxide paint
Erection cost of Red oxide paint
Stay Insulators 90X65mm
Stay set complete without Stay wire 16 mm. (Painted)
Erection cost of Stay set complete without Stay wire 16 mm. (Painted)
STAY WIRE 7/3.15 MM.(7/10 SWG)
Stone Block/Pre cast block for base pedding(450X450X75MM)
Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels
Transformer mounting Channel (100X50x6 mm.)
Erection cost of Transformer mounting Channel (100X50x6 mm.)
Please Enable Macros to View BoQ information
stage.html
html • 0.02 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.56 MB
Tendernotice_2.pdf
PDF • 7.49 MB
SBDocumentmerged.pdf
Tender Documents • 7.47 MB
BOQ_563516.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid