KMC/EE/WS/GRWW/25-26/PH-II/47

Dismantling R.C. floor, roof, beams etc including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.(a) In ground floor including roof.

SUPPLY I.S.A AS PER IS: 2062-2011/LATEST REVISION, MAKE: SAIL/TATA/JINDAL (A) UPTO 100 X 100 X DIFFERENT THICKNESS

M.S PLATE AS PER IS: 2062-2011/LATEST REVISION, MAKE: SAIL/TATA/JINDAL (A) ABOVE 10 MM UPTO 20 MM THICKNESS

Cutting to requisite length or shape departmental R.S. joists,channels, angles, tees, plates etc.

Welding in M.S. structural work with gas or electric: (a)Tack weld

Drilling holes of requisite diameter in R.S. joists channels, tees.Plates etc. (a) (ii) Extra for drilling beyond depth of 10mm

SUPPLY STRUCTURAL M.S. BOLT/NUT/WASHER (HOT DIPPED GALVANISHED)

SUPPLY, DELIVERY, INSTALLATION, TESTING AND COMMISSIONING OF TOTAL PNEUMATIC SYSTEM WITH LIMIT SWITCH AND OTHER ACCESSORIES REQUIRE FOR 250 MM PNEUMATICALLY OPERATED SLUICE VALVE.

Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge.

Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar (a) 20 mm thick plaster

Removing old paint from blistered painted surface of steel or other metal by chipping including scraping and cleaning and exposing the original surface

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(b) On steel or other metal surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white)

Sub Total