Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.8 LAccepted-Finance | ₹4.8 L | 1 | Accepted-Finance Accepted |
| 2 | 2₹5.3 LRejected-Finance | ₹5.3 L | 2 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | SHANKER BOREWELLS AND ENGINEERS L1 | SRIDARSHAN ENTERPRISES L2 |
|---|---|---|---|---|---|
| 1.00 | Providing and installation of India Mark III (65mm), India Mark II (50mm) & India Mark-II extra deep (32mm) deepwell hand pumps as Per IS: 13056-1991 alngwith its upto date ammendments and IS: 9301 respectively comprising of following items:- Transportation of suitable truck mounted DTH & ODEX/ Percussion Calyx/ RC drilling rigs alongwith necessary accessories etc. to the site of work and erection of portable rig including levelling etc. complete in all respects as per direction of Engineer-in-Charge. | 1 | Nos | 4,800 ₹4,800 | 5,500 ₹5,500 |
| 2.00Drilling bores of 152 mm dia as per IS: 2800-1979 using ODEX (TUBEX) attachment required drilling in collapsible strata conglomerate, boulder, pebble, gravals, silt, clay etc. including cost of attachments, consumable store, bits, water, POL etc compelte with system of simultaneous lowering of 125mm nominal bore, 5.0mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25mm dia Advani Oerlikon electrodes with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respect as per directions of Engineer-in-Charge( MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately). | |||||
| 2.01 | 1X90 =90 | 90 | Rmt | 1,490 ₹1.3 L | 1,550 ₹1.4 L |
| 3.00Supplying and lowering of IS marked 125mm Nominal bore, 5mm thick fincut MSERW casing pipe as per IS 4270:2001 as per requirement of ODEX attachment from approved manufactures complete in all respects as per directions of Engineer-in-Chages . | |||||
| 3.01 | 1X90=90 | 90 | Rmt | 1,600 ₹1.4 L | 1,700 ₹1.5 L |
| 4.00 | Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directions of Engineer-in-Charge. | 1 | Nos | 5,000 ₹5,000 | 6,000 ₹6,000 |
| 5.00 | Development of borewell and yield testing with air-compressor through V notch and disinfection etc. complete in all respects as per IS 2800 : 1979 and as per direction of Engineer-in-Charge. | 1 | Nos | 5,000 ₹5,000 | 6,000 ₹6,000 |
| 6.00 | Supply, erection, testing & commissioning of submersible pumping set of reputed make such as Sabar/ Oswal/KSB/BS/Jonston/worthingtonmodel j-156 N stages-15 conforming to latest relevent BIS code. The pump should be fitted with free flow impellers of bronze /suitable alloy as per BIS 5659 or latest with up to date ammendments suitable for raw/clear water having charcterstcs as mentioned in item No.1 greased packed bearings & shell with wound stator on motor side & with shaft protection to a submersible pump side ensuring better life for shaft conforming to BIS specifications. The pump shall be directly coupled to a submersible squirrel cage electric induction motor of Kirloskar/NGEF/Jyoti / Crompton make conforming to relevent BIS code with up to date ammendments totally dust & water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber chamber & grease packed lubricated bearings & provided with stainless steel thrust bearing plate to withstand non vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guard, errection clamps, cable clips & depth gauge etc. & suitable for operation on data. | 1 | 5 HP | 60,000 ₹60,000 | 70,000 ₹70,000 |
| 6.01Total Head in mtrs (i/c depth of column pipe in case of T/Well):-160.00 mtrs. | |||||
| 6.02Capacity (in LPS) of each pump set:-0.80 LPS. | |||||
Tender Value
₹5.0 L
EMD Value
₹9,951
Closing Date
8 Apr 2026, 11:00 amClosed
Executive Engineer
Jal Shakti Division Baddi
(SH Drilling by DTH/ODEX percussion/ clayx/RC portable rigs. 90 mtrs deep, providing lowering of GMS pipe 32 mm dia and supply and errection of submersible pumping Machinary).
2026_HPIPH_132323_1
NIT No. 22176-22276 Dt. 24-03-2026
Open Tender
Civil Works
90 days
Baddi
Please refer Tender documents.
7 documents required · 7 mandatory
₹350
₹9,951
20 Apr 2026
24 Mar 2026
8 Apr 2026
24 Mar 2026
8 Apr 2026
24 Mar 2026
24 Mar 2026 - 7 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and installation of India Mark III (65mm), India Mark II (50mm) & India Mark-II extra deep (32mm) deepwell hand pumps as Per IS: 13056-1991 alngwith its upto date ammendments and IS: 9301 respectively comprising of following items:- Transportation of suitable truck mounted DTH & ODEX/ Percussion Calyx/ RC drilling rigs alongwith necessary accessories etc. to the site of work and erection of portable rig including levelling etc. complete in all respects as per direction of Engineer-in-Charge. | |||||
| 2Drilling bores of 152 mm dia as per IS: 2800-1979 using ODEX (TUBEX) attachment required drilling in collapsible strata conglomerate, boulder, pebble, gravals, silt, clay etc. including cost of attachments, consumable store, bits, water, POL etc compelte with system of simultaneous lowering of 125mm nominal bore, 5.0mm thick MSERW fincut casing pipe which will be welded together using 2.5mm or 3.25mm dia Advani Oerlikon electrodes with one plain end and the other end chamfered to 50 degrees removing paint on the area to be welded, inclusive of the cost of bio-degradable and non-toxic foam flush etc. complete in all respect as per directions of Engineer-in-Charge( MSERW fincut casing pipe, casing shoe and bit tube as per requirement of ODEX to be paid separately). | |||||
| 2.01 | 1X90 =90 | - | Rmt | - | - |
| 3Supplying and lowering of IS marked 125mm Nominal bore, 5mm thick fincut MSERW casing pipe as per IS 4270:2001 as per requirement of ODEX attachment from approved manufactures complete in all respects as per directions of Engineer-in-Chages . | |||||
| 3.01 | 1X90=90 | - | Rmt | - | - |
| 4Providing and fixing suitable casing shoe and bit tube as per requirement of ODEX attachment complete in all respects as per directions of Engineer-in-Charge. | |||||
| 5Development of borewell and yield testing with air-compressor through V notch and disinfection etc. complete in all respects as per IS 2800 : 1979 and as per direction of Engineer-in-Charge. | |||||
| 6Supply, erection, testing & commissioning of submersible pumping set of reputed make such as Sabar/ Oswal/KSB/BS/Jonston/worthingtonmodel j-156 N stages-15 conforming to latest relevent BIS code. The pump should be fitted with free flow impellers of bronze /suitable alloy as per BIS 5659 or latest with up to date ammendments suitable for raw/clear water having charcterstcs as mentioned in item No.1 greased packed bearings & shell with wound stator on motor side & with shaft protection to a submersible pump side ensuring better life for shaft conforming to BIS specifications. The pump shall be directly coupled to a submersible squirrel cage electric induction motor of Kirloskar/NGEF/Jyoti / Crompton make conforming to relevent BIS code with up to date ammendments totally dust & water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber chamber & grease packed lubricated bearings & provided with stainless steel thrust bearing plate to withstand non vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guard, errection clamps, cable clips & depth gauge etc. & suitable for operation on data. | |||||
| 6.01 | Total Head in mtrs (i/c depth of column pipe in case of T/Well):-160.00 mtrs. | - | - | - | - |
| 6.02 | Capacity (in LPS) of each pump set:-0.80 LPS. | - | - | - | - |
stage.html
html • 0.04 MB
technical_195673.pdf
techsummary_195673.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.06 MB
TandC.pdf
Tender Documents • 2.89 MB
BOQ_195673.xls
BOQ • 1.84 MB
PWD6.pdf
Tender Documents • 0.25 MB
PWD8.pdf
Tender Documents • 1.30 MB
Download all tender documents and submit your bid