IEI work for AAJVS Building at Uttara

Amount

Wiring for light/fan point/exhaust fan point/call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit with piano type switch, phenolic laminated sheet, suitable size M.S box and earthing the point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable etc. as required. a) Group - A Type-I Qtr - 2 Nos. (2 x 15)=30 Nos. Type - II Qtr - 1 No. - 18 Nos. Type - III Qtr - 1 No. - 20 Nos.

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 x 6 Sqmm + 1 x 6 sqmm earth wire

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 A switch

3 pin 5/6 A socket outlet

TV antenna Socket outlet

Bell Push

Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required

100 mm X 100 mm X 60 mm deep

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/ LED lamps per fitting, complete with all accessories including connections etc. as required

Installation, testing and commisioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper condutor, single core cable etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required

Upto 450 mm sweep

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)

8 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required

Providing and fixing 4.00mm dia copper wire on surface or recess for loop earthing as required.

Supplying, installation, testing and commissioning of ASHLOK make SEE brand safe earthing electrode type-19, 50mm dia, length 2 mtrs (short time current -21.4 kA rms for 1 sec, peak-51.59 KA) with back fill compound including providing masonary enclosure with cover plate having locking arrangement etc. as required.

Supplying of Surface mounted LED Batten Luminaires with Lamp type 20W LED 6000K, Make;- Havells, E-LITE LED CURVE ordering code LHEXBXPNIN1W020 or its equivalent as approved by Engineer - in - Charge.

Supplying of 9W LED Mirror Light fitting . Make :- Havells, Model EDGE LITE or its equivalent as approved by Engineer - in - Charge.

Supplying of LED Bulkhead fitting comprising high brightness LED of 10W, 6000K and with IP65 protection. Make :- Havells, Model Endura Rugby Neo or its equivalent as approved by EIC.

Supplying of 10W LED lamps with light output of 1425 lumen (Make:- Havells/Philips/Crompton or its equivalent )

Supplying of 5 star, 26W (BLDC Type) energy saving A.C Ceiling fan (1200mm sweep) for operation of 230v, i/c wiring down rod standard length (upto 30Cm) with all accessories etc as required. Make:-Havells. Model : Efficiencia Neo (BLDC 26W) or Equivalent to ISI as approved by EIC.

Supplying of Exhaust fan 300mm sweep, suitable for operation on 230V, single phase, 50 Hz (Metal Type) Make: Havells Model Ventil Air DSP or its equivalent as approved by EIC.

Supplying and erection of metering box made out of SMC of overall size 310mm X 285mm X 180mm with hinged cover and locking arrangements, veiwing glass etc. as required.

M/s G K Construction

SARAVANA TRADING COMPANY