Construction, installation and commissioning of 1000 LPH RO plant at Deulwada Village under CSR activity under Chargaon-Telwasa Sub Area of Majri Area.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fllets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more.

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Providing and fixing M.S.grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings / wooden frames openings/ wooden frames with rawl pluge screws etc.

6mm cement plaster of mix:1:3 (1 cement :3 fine sand )

12 mm th cement plaster in C.M. 1:6 incl curring etc complete

Providing and fxing aluminium work for doors, windows,ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fxing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-harge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size ) over 75 mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing top smooth

Structural steel work riveted bolted or welded in built up sections, trusses and framed work, including cutting. Hoisting, ficing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge Acid and alkali resistant tile

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 pram/litre

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing M.S. fan clamp type l or ll of 16 mm dia M.S.bar bent to shape with hooked ends in R.C.C.slabs or beams during laying including painting the exposed portion of loop. All as per standard design complete.

Providing and fixing 1000 LPH RO plant ( Semi automatic) with raw water pump, pressure sand filter, activated carbon filter, Antiscaling Dosing system, Micron filter, High pressure pump, Membrane, automatic control panel, sensor for both tanks all the accessories of approved quality and reputed manufacturer with ISI mark RO plant before installation RO plant should be approved from the concern department/ Engineer in charge. This also includes one year warranty trial run of operation and maintenance ---etc complete

Providing and fixing 2 Tonne ONLINE CHILLER with Emmerssion compressor, ( Auto cut ) with one year replacement warranty, circulation pump with one year hand to hand guarantee , temparature sensor with setting option --- etc complete as per the instructions of Engineer in charge

Providing and installation of WATER COIN MACHINE including required capacity pump and all plumbing work as per directions of Engineer-in charge . Machine should be following specifications it can be dispense different batches according to different coin ,it can dispense exact quantity of water in every batch machine should have separate cabinet for coin collection etc.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing for filter water stainless steel tank of 1000 ltr capacity of approved quality or reputed manufacturer as per the instructions of engineer in charge --- Etc complete

providing and fixing of UPVC pipe line required for supply of water from source and inter connections of tanks while installation of RO plant also the electrical accessories required for power supply of RO plant as per the instructions of engineer in charge

Transportation charges of 1000 LPH capacity RO plant including 2 Tonn capacity ONLINE CHILLER and all allied accessories related to installation of RO plant as per the instructions of engineer in charge

Point wiring in PVC trunking (casing- capping ) with 1.0 sq.mm FRLS grade copper wire with flush type switch and required accessories as per specification No. WG-PW/SW

Providing pipe type earthing with 40 mm dia. G.I. pipe or 20mm dia.G.I. Rod complete with all materials as per specification No.EA-EP

Supplying and erecting ISI mark flush shock proof plug socket 6 pin 6A and 16A with switch 16A combined unit erected recess in 16 guage M.S. sheet box duly painted and connected with earth terminal and leads

Supplying and erecting ISI marked recess type 3 pin plug socket 6A with piano switch 6A combined unit erected on polished double wooden or plywood pasted with sunmica and with connectinng leads.

Supplying and erecting mains/circute with 2x2.5 s.q. mm. F.R.L.S. copper PVC insulated conduct/trunking /indide pole/ Bus bare or any other places. As per specification No. WGMA/BW.

Supplying and erecting PVC trunkinng (PVC casing-ncapping ) of size 25 mm with accesscries on wall/ceilling as per specification WG/MA/CON

Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary

Supplying and erecting regular/ standard model ceiling fan of 1400mm. Sweep complete erected in position as per specification no. FG-FN/CF

Supplying and erecting electronic type step regulator for ceillig fan 600 /900 /1200 / 1400 mm sweep, completed erected on provided switch board.

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges o give high gloss finish etc. complete at all levels. Area of slab upto 0.50 sqm

Writing of letter on board surface including painting of back ground of boards cleaning surface and enganging all labours and materials required to complete the job etc complete as per the instructions of engg in charge

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality ( screwed end ) 25 mm nominal bore

Total impact of GST for the purpose of CTC

Mangesh Bramhadev Mandhare (BID ID -1181667)

A. S. TRADERS (BID ID -1181443)

AJIT KUMAR YADAV (BID ID -1181498)