PROVN OF PREFAB SHELTER FOR LIVING IN ACCN FOR GE(P) AIR FORCE LEH

Amount

PART-I B/R WORKS Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth and not exceeding 10Sqm on plan and getting out in any type of soil, trimming sides, leveling bottom, watering and well ramming bottom, complete all as specified and directed.

Returning, filling in trenches (soil), including spreading, leveling and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed.

Removal of surplus excavated soil to a distance not exceeding 50metre and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed.

Excavation over area not exceeding 1.5m deep and getting out in any type of soil, complete all as specified and directed.

Excavation over area depth exceeding 1.5m but not exceeding 3.00m and getting out in any type of soil, , complete all as specified and directed.

Spreading and levelling in layers n exc. 25 cm thick each, complete all as specified and directed.(Extra soil required for filling in floor or foundation shall be arranged by the Contractor)

Material and labour, Plain Cement Concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, sub base of floor etc complete all as specified and directed.

Use and waste of steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished, complete all as specified and directed.

Use and waste of steel formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete, square, complete all as specified and directed.

Use and waste of steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) or flat, rough finished, complete all as specified and directed.

Supply and fix in position, mild steel bars TMT, 10m dia and over, cut to length, bent to shape required, including cranking, bending for hooping of columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed.

Supply and fix in position, mild steel bars TMT, 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, as in reinforcement, complete all as specified and directed.

Supply and fix in position, mild steel bars 6mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Material and labour, reinforced cement concrete M-30 (Design Mix) using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, and mass concrete, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.

Material and labour, reinforced cement concrete M-30 (Design Mix) using 20mm graded crushed stone aggregate as in columns, pillars, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.

Material and labour, reinforced cement concrete M-30 (Design Mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. Note : Steel reinforcement bars and use and waste of form work shall be measured and paid separately.

Material and labour, pre-cast cement concrete block masonry with soild blocks type B1, 1:2:4 (20mm graded stone aggregate), exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.

Material and labour, hardcore of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and directed.

Material and labour, 100mm thick cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in subbase of flooring, complete all as specified and directed.

Material and labour, 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in subbase of flooring, complete all as specified and directed.

Material and labour, 25mm thick cement concrete (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in subbase of flooring, complete all as specified and directed.

Material and labour, 100mm thick cement concrete (1:2:4) type B-2 using 40mm graded crushed stone aggregate as in floor/path surface finished even and fair, complete all as specified and directed.

Material and labour, Forming construction joint 30mm deepX 10mm wide filled with sealing compound grade A, complete all as specified and directed.

Material and labour,Chequered cement concrete tiles 200mm X 200mm X 20mm thick set jointed and pointed in neat cement slurry in floors with grey cement and pigment, @ 3kg/sqm over and including 20mm thick screed bed/bedding layer in cement mortar (1:4), complete all as specified and directed.

Material and labour, first quality non-skid coloured ceramic tiles 7 - 8mm thick, size 400mmx400mm, in floors etc. set and jointed in neat cement slurry @ 3kg/sqm over and including 20mm thick screed bed/bedding layer in cement mortar (1:4), and pointed in white cement mixed with pigment or coloured cement to match, complete all as specified and directed.

Material and Labour, 10mm thick vitrified ceramic tiles, coloured, light shade (square / rectangular), polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed / bedding layer in cement motar (1.4) all as specified and directed by Engineer-in-charge. Note:- Colour and design as approved by GE

Material and labour, rendering 15mm thick plaster in cement mortar (1:4), on stone/ brick/concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour, rendering 15mm thick plaster in cement mortar (1:4), on block masonry surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour, Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt , complete all as specified and directed.

Material and labour, preparing newly plastered surfaces of walls and applying two coats of cement base paintr over a coat of primer , complete all as specified and directed.

Supply and fix, GI tubing 15mm bore medium grade with necessary GI fittings and fixed complete to wall, or laid under floors, or fixed complete to wall/ceiling with clips, wall hooks and wooden plugs etc, complete all as specified and directed.

Supply and fix, GI tubing 20 mm bore medium grade with necessary GI fittings and fixed complete to wall/ceiling with clips, wall hooks and wooden plugs etc or laid in floors complete all as specified and directed.

Supply and fixing, Vitreous China wash down water closet pan (pedestal pattern) white(excluding fixing bolts,) incl 10 ltrs capacity, PVC valveless, symphonic type flushing cistern, Iow level, white, with inlet, ball valve, float and handie including brackets and provision of Flush or high density or PVC ,32mm dia for low level cistern pipe of polythene complete all as specified and directed.

Supply and fixing, Vitreous china wash basin, white,fiat back, size 630 X 450 mm including brackets with cutting and pinning in ends of brackets or erecting stand including PVC waste pipe 32 mm dia,complete all as specified and directed.

Supply and fix, fancy type Pillar tap, cast copper alloy, chromium plated, with capstan head, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm dia bore, complete all as specified and directed.

Supply & fix, PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450mm long, suitable for 15mm dia bore pipe, complete all as specified and directed.

Supply and fix, bib taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm dia bore, complete all as specified and directed.

Supply and fix, stop valves, fancy type chromium plated , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes 15mm bore iron pipe or for brass ferrulee complete all as specified and directed.

Supply and fix, brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges with and including screws complete all as specified and directed.

Supply and fix, Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.

Supply and fix, Gun Metal gate valve with iron wheel head, screwed both ends for 20mm dia bore pipe, including cutting of pipes and insertion of union, (ISI marked & of specfied make), including taking down old and removal, complete all as specified and directed.

Supply and fixing/hoisting, rotational moulded polyethylene (HDPE) water storage tanks (cylindrical vertical with closed top), 500litres capacity ‘triple layered’, white colour with screwable lid, hoisted and fixed in position including inlet, outlet and drain pipe with plug, ball valves high pressure of PTMT (Minimum weight 210gms) with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe 20mm dia bore, complete all as specified and directed.

Supply , fabrication and erection of PEB steel structure of size as shown on drawings considering and including the following details/ requirements :- a). Size of PEB including Toilets will be as shown on drawings. b). Structural details of PEB including toilets are mentioned in drawing uploaded with the tender. (In this regard pls refer Particular Specification). . All the items i.e. structural steel work, bolts, base plate, connections, and erection are deemed to be included in the quoted rate for this item. c). Wall- Supply and Fixing, Sandwich puff panel 80 mm manufactured in Continues Production Line using prepainted galvanised sheet of approved colour density: 40 kg. Outer and inner sheet thickness: 0.50mm colour coating Rmp Yield Strength: 240 Mpa Coating Mass: 120 GSM width 1.12m. d). False Ceiling– Supply and Fixing, sandwich puff panel 40 mm manufactured in continuous Production Line using pre-painted galvanized sheet of approved colour of density 40 kg. Top and bottom sheet thickness : 0.40mm colour coating Rmp Yield Strength : 240 Mpa Coating Mass : 120 GSM Width : 1.12m complete all as specified. e). Details of powder coated aluminum doors, windows and ventilators will be provided (S&F) as per TD drawing and as specified. Toilet doors (frame and shutter) will be of PVC all as specified. f). Roofing- Supplying and fixing of roof will be constitution of Metallic color coated profiled galvanisedsheets 0.6mm thick duly secured using and further sealed with silicone rubber for further added water protection for extra safety from leakage . g). Aluminum Frame with Sheeting for Verandah Covering:Supply and fix anodized aluminum section of weight not less than 0.753 Kg per m medium weight and 3mm thick polycarbonate sheet with height of 8 feet in front verandah. Note:- The Plinth area of PEB structure is not less than 165.00 Square metre.

Material and labour, 150mm salt glazed stone ware (drain pipe) laid in trenches and jointed in cement mortar 1:2, complete all as specified & directed.

Material and labour, concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete (1:3:6) type C-2, size of pipe 150mm dia bore, complete all as specified and directed.

Material and labour, Plain Cement Concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and directed.

Material and labour, walling of random rubble stone masonry built in cement mortar 1:4 brought upto course, well bonded, bedded and solidly hearted , complete all as specified and directed.

Material and labour, pre-cast cement concrete block masonry with soild blocks type C-1, 1:3:6 (20mm graded stone aggregate), exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.

Material and labour, pre-cast cement concrete block masonry with soild blocks type C-1, 1:3:6 (20mm graded stone aggregate), exc 10 cm in width and setting in cement mortar 1:4 as in honey-combing complete all as specified and directed.

Supply and fix,Conventional LLDPE septic tank for 25 users designed to carry sewage and sullage water, including earth work in any type of soil, PCC !:3:6 in foundation, Vent shaft, and necessary fixing arrangement complete all as specified and directed.

Material and labour, plain cement concrete (1:2:4 ) type B-2 using 40mm graded crushed / broken stone aggregate as in filling, complete all as specified and directed.

Material and labour,loose filling of broken stone boulder gauge exc 80mm but not exceeding 150mm as in soakage well/pit complete all as specified and directed.

Material and labour, Cast iron work FG 150, , unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles iron work complete all as specified and directed.

Material & Labour for Grating doom 100mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.

PART-II E/M WORKS Material and labour, Point wiring for one light point/ fan point/ Bell point controlled by one switch with 1.5 sqmm PVC insulated and unsheathed FR-LSH copper conductor single core multi stranded flexible copper cable 1100 Volts grade conforming to IS-694 using approved colour code as per IS code drawn through non metallic rigid PVC casing Caping heavy duty double locked with size as per site requirement in accordance with clause No 19.25 of SSR Part I, ISI marked including casing caping accessories like bends, tees, junction boxes etc fixed with all accessories suitable for modular type fitment including provision for fixing of modular surface boxes of suitable size for fixing of modular switches/sockets/regulator etc along with PVC insulated and unsheathed FR-LSH 1.5 sqmm multi stranded copper conductor cable 1100V (green color) as continuous earth lead wire connected to common earth and earth dolly complete all as specified and directed

All as per Ser item No 56 here-in-before but for 06 Amp socket outlets point controlled by one switch on Independent board with the cable 1.50 sqmm size complete all as specified and directed.

All as per Ser item No 56 here-in-before but for 06 Amp socket outlets point controlled by one switch on same board with the cable 1.50 sqmm size complete all as specified and directed.

All as per ser item No 56 here-in-before but for 16 Amp socket outlets point controlled by one switch on Independent socket outlet using 2.5sqmm PVC insulated and unsheathed FR-LSH copper conductor single core multi stranded flexible copper cable 1100V of approved colour code as per IS code for phase and neutral along with PVC insulated and unsheathed FR-LSH 2.5 sqmm multi stranded copper unsheathed cable 1100V (green color) as continuous earth lead wire connected to common earth and earth dolly complete all as specified and directed.

Material and labour for, module cover plate with frame for 1/2 module complete all as specified and as directed.

Material and labour for, module cover plate with frame for 4 module complete all as specified and as directed.

Material and labour for, module cover plate with frame for 6 module complete all as specified and as directed.

Material and labour for, modular surface box for 1/2 module complete all as specified and as directed.

Material and labour for, modular surface box for 4 module complete all as specified and as directed.

Material and labour for, modular surface box for 6 module complete all as specified and as directed.

Material and labour for, modular switch, one way 6/10 Amp, 1 module with suitable plate and cover complete all as specified and as directed.

Material and labour for, modular switch, one way 16/20 Amp, 1 module with suitable plate and cover complete all as specified and as directed.

Supply and fix, Modular socket outlet, flush type, 5 pin, 6Amps, 240volts, complete all as specified and as directed.

Supply and fix, Modular Socket outlet 6/16Amps, 2 and 3 Pin combined 2 module, complete all as specified and as directed.

Supply and fixing, Bell push, flush type, Modular Bell push 6A 1 module complete with all accessories , complete all as specified and as directed.

Supply and fixing, bell multi music type , complete all as specified and as directed.

Supply and fix, ceiling rose Bakelite white/black coloured of size 25x50mm two to three terminals, complete all as specified and as directed.

S&F for Holder insulated body with back plate for batten fitting suitable for LED lamp complete all as specified and directed by Engineer-in-Charge.

S&F LED light fitting mirror type with high ouput diffuser 2 feet ,10 watt 220 volts AC decorative type energy efficient LED integrated batten type luminaires suitable for wall or ceiling mounting with built in LED Chip & integral LED driver 10 watt,Aluminium channel housing & Polycarbonate diffuser ,Color temperature 6500 K or as directed,Luminaire efficacy not less 100 lm/W with all accessories, fixing arrangement internally pre-wired, making all connection using 1.5 sqmm copper conductor multistarnd PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through PVC flexible conduit complete fixed in position & connecting complete all as per specified and directed

Supply & fixing for LED Bulk Head type with high output, 10 watt, 220 V AC, Color temperature 6500K or as directed, luminous flux of light 1000 lumens (lm) with all accessories, IP 65 protection dust and water resistant, surge protection up to 2.5kV, PC opal high efficiency diffuser ,LM 80 tested made die cast aluminium housing with complete assembly, suitable for surface/wall mounted with driver holder including connecting up using 1.5 sqmm copper conductor multistrand PVC insulated with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply & fixing for LED Street Light fitting 30 watt, for opearting voltage between 110V to 320V system efficiency not less than 120 lumen / watt, PF-0.95 minimum, IP66 protection, 5700CCT(K), CRI between 80-85, confirming to LM79 and LM 80 standards or as per IS-16104:2012 and IS-16106:2012, for estimated life span of minimum 50,000 hrs consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with LED street optics LENS for uniform light distribution, weather proof gasket for lamp & driver compartment, Heat resistance toughened UV stabilized glass fitted in cast aluminium housing with SS screws complete all as specified and directed.

Supply & fixing for Bracket made out of GI heavy grade pipe of size 40 mm dia 1.5 mtr long bend to an angle of 120 degree with 02 Nos MS clamp 50mm x 50mm and 04 sets of nuts,bolts and washers painting with two coats of synthetic enamel paint over a red oxide primer complete all as specified and directed.

Supply and fixing, LED batten surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption <20W, luminaire lumen >2000 lm, system efficiency of > 120 lumens/W, LED Make : Nichia/ Cree/ Everlite / Eclison/ Osram/ Lumiled, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class 1, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 450C, driver efficiency>85%, power factor > 0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) as per L7O criteria, two stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level < 60 V DC as per IEC standard with LM70 & LM 80 certification .

Supply and fixing, of 7 watt LED retrofit lamp B-22 holder base with polycarbonate body and aluminium heat sink cat part No LHLDEUEEMC8R007 of Havells or equivalent in list of make complete all as specified and directed.

S&F for Exhaust fan 200 mm sweep, heavy duty motor with double ball bearing,ABS PVC body, With bird guard to protect the fan in running condition, AC, single phase, 230 Volts, including connection with 1.5 sqmm mutistrand copper conductor flexible wire from ceiling rose, including outside louvers with proper hole, and necessary fixing arrangement and making good to disturbed surface complete all as specified and directed

Supply and fix, MCB, SP, 6-32Amps, 240volts, 10KA, 'C' series, complete all as specified and directed.

Supply and fix, MCB, SPN, 32Amps, 240 volts, 10KA, 'C' series, complete all as specified and directed.

Supply and fixing, Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases cutting in wall for fixing DB and making good disturbed wall surfaces to match with existing specification complete all as specified and directed.

Supply and fixing sheet metal enclosure MCB distribution board. Triple pole & neutral 4way 415 volts with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link/earth flush in wall including chases wall for fixing DB and making good disturbed wall surfaces to match with existing specification complete all as specified and directed

Supply and fixing triple pole with neutral (TPN) of 415 volts 10 kA "C" curve MCB TPN of cap 63 Amps 415 volts complete all as directed

Material and Labour for Sub main wiring using PVC insulated and unsheathed fire retardant low smoke and halogen (FR-LSH) copper conductor single core multi stranded unsheathed copper cable 4.00 sqmm (for Phase and neutral) and earth continuity conductor of size 4.00 sqmm multistranded copper conductor FRLSH 1100V conforming to IS:694 (2010) using approved colour code for phase and neutral as per IS code drawn through non-metallic PVC rigid concealed conduit, 20mm outer dia (ISI marked) heavy mechanical stress (HMS) grade in accordance with IS:9537 (Part 3) having wall thickness not less than 2.0 mm thick. The external dia shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I (ISI marked) including conduit accessories like bends, tees, junction boxes etc fixed concealed with all accessories complete all as specified and as directed by Engineer-in-charge. Note : 2 runs of 4.00 sqmm copper cable & 1 run of 4.00 sqmm copper cable in and including 20mm PVC casing and caping shall be measured as one unit.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0mm thick buried directly in ground, (Earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below normal ground level, connected to and including 4 mm dia galvanised earth lead wire by means of bolts, nuts, check nuts and washers of galvanised standard iron or steel all as specified or indicated in electrical plate no 3 of MES Part-I, including testing on completion including the material and labour of the following: - (i) Excavation and earth work for drilling hole for electrode in any type of soil. (ii) PCC pit in cement concrete 1:2:4 type B-1. (iii) Precast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (iv) Funnel with watering pipe of GI 20 mm nominal bore medium grade and copper lugs etc all as specified. (v) 15 mm nominal bore light grade GI protection pipe 5 mtr long for protection of earthing lead from mechanical injury or tempering.(vi) Requisite quantity of common salt and charcoal.(vii)Testing of earthing.

Supply and laying / fixing , GI pipe light grade 50mm dia bore for cable protection fixed to pole/wall or laid under floor/road/pavement, complete all as specified and directed.

Supply and laying / fixing , GI pipe light grade 80mm dia bore for cable protection fixed to pole/wall or laid under floor/road/pavement, complete all as specified and directed.

Material and labour, sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.

Supplying and laying, factory made unreinforced precast concrete cable cover LV type-II, flat, of size 300x180x40mm, laid flat and dry in trenches over the cable for protection, length perpendicular to the direction of cable adjacent to each other, complete all as specified and directed.

M & L for random rubble stone masonry in cement mortar 1:6 as in valve pit of internal size 0.90mx0.90mx0.9m with 50mm thick coping with PCC M-15 type B-0 using 12.5mm grade crushed stone aggregate including excavation and earth work and disposal of surplus soil to a distance not exceeding 50 mtr and depositing all as directed, plastering internal walls with 15mm thick cement mortar 1:6 and flush pointing externally in the same mortar as the work proceeds including 3.15mm thick MS sheet cover with handle & locking arrangement and angle iron frame of size 40x40x6mm including painting with two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed.

Supply and fix, GI tubing 25 mm bore medium grade with necessary GI fittings and fixed complete to wall/ceiling with clips, wall hooks and wooden plugs etc or laid in floors complete all as specified and directed.

Supply and fix, GI tubing 40 mm bore medium grade with necessary GI fittings and fixed complete to wall/ceiling with clips, wall hooks and wooden plugs etc or laid in floors complete all as specified and directed.

Supply and fix, Gun Metal gate valve with iron wheel head, screwed both ends for 25mm dia bore pipe, including cutting of pipes and insertion of union, (ISI marked & of specfied make), including taking down old and removal, complete all as specified and directed.

Supply and fix, Gun Metal gate valve with iron wheel head, screwed both ends for 40mm dia bore pipe, including cutting of pipes and insertion of union, (ISI marked & of specfied make), including taking down old and removal, complete all as specified and directed.

Material & labour, for Cutting/screwing of existing steel water tubing of 80mm dia and inserting GI TEE of 80x80x40mm size complete all as specified and directed

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 70Sqmm 3.5core aluminum conductor 1100volts grade under ground cable including both side connection with cable lugs etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note(s): Excavation & earth work, sand cushioning and PCC cover for protection of cable shall be measured and paid separately.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 35Sqmm 3.5core aluminum conductor 1100volts grade under ground cable including both side connection with cable lugs etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note(s): Excavation & earth work, sand cushioning and PCC cover for protection of cable shall be measured and paid separately.

Material and labour, weather proof outdoor bus bar chamber, made out of 3.15mm thick MS Sheet with front & rear opening, powder coated, dust and vermin proof, IP-66 Protection comprising 4 Nos aluminium strip each of 100 Amps, 80cm long having 10cm minimum distance from the body and between bus bars, fixed in steped way duly insulated mounted epoxy insulators in horizontal position in steped manner with 4 Nos mounting legs made out of 40mm x40mm x 6mm angle iron grouted in PCC block (30 cm depth below ground level and 60cm above ground level) in cement concrete 1:3:6 type C2 (Using 40mm graded crushed stone aggregate) and one MCCB of 100 Amps, 16 kA , 4 pole ,415 volts ,50 Hz as incomer 01 No and MCCB of 63 amps ,16 kA,4 pole ,415 volts 50 Hz -02 Nos for out going bldg connected with bus bars by means of suitable size of aluminium thimbles, nuts, bolts & washers including cable glands at entry and outlet points including excavation and earth work, returning filling and removal of surplus soils complete.all as specified and as directed.

R C TRADERS