Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹65 L
EMD Value
₹65,000
Closing Date
24 Nov 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
THE COMMISSIONER, SALEM CITY MUNICIPAL CORPORATION
Salem City Municipal Corporation, Fort Main Road, Salem
Repairs and Maintanance to the Corporation School Building at Car Street in D.No.32
2023_MAWS_388820_1
E3/EST NO.272/B/2023-2024
Open Tender
Civil Works
Lump-sum
90 days
SALEM CITY MUNICIPAL CORPORATION
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹65,000
24 Nov 2023
14 Nov 2023
24 Nov 2023
14 Nov 2023
24 Nov 2023
14 Nov 2023
Amount
Clean removal of cement plaster from walls and racking out joints 20mm deep as directed by the departmental officers.
Scraping and Removing old paint from structural steel by manual labour in all floors as directed by the departmental officers
Dismantling, removing and carefully stacking press tiles with weathering course etc, complete as directed by the departmental officers
Dismantling the damaged Doors and windows including removal of frames, Hinges, fastenings and fixing the same including necessary alterations etc., complete complying with standard specification and as directed by the Departmental officers..TNBP No 18
Brick or Stone masonry in cement mortar wall, add for every additional 3 M or part there of over the initial height of 3 M
Plain Cement concrete 1:2:4 (One cement Two M sand and four broken Machine crushed stone jelly) using HBG Machine crushed stone jelly of size 20mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete
Providing and laying in position standardized concrete Mix M-20 Grade (1:1y:3) in accordance with IS 456-2000 using 20mm and below graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without impairing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3cum), 5156kg of 10 – 12mm machine crushed stone jelly and with about (4.79cum) 7670kg of Q.dust, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers – The Coarse and Fine aggregates to be used should comply with the requirements of IS Standards. (detailed data for 10 m3 )
For Ground floor upto 4.50 m height
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
Providing two legged scaffolding using 15 cm dia casuarinas post of 4 M over all length (3 M Height + 0.5 M Projection + 0.5 M into the Ground) the distance between the two rows being 1.25 M and the spacing of posts being 2.0 M in both the rows with two horizontal posts with 0.5 M. Overlap on either side and braces at 2.0 M Center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40 mm thick and 1 M width, etc. in a complete from using coil and nails.
Cost of 1 RM (One Running Metre) with a height of 3 m
Cost of 1 RM (One Running Metre) of every additional height of 2.5 Mover the initial height of 3 M : G/6
Supplying and erecting centering for sides and soffits including necessary supports and strutting up to 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete
For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
Brick work in following Cement Mortar using best quality of Second class ground moulded chamber burnt bricks 9"x4-3/8"x2-3/4" for foundation and basement including curing etc, complete complying with standard specification.
In cement mortar 1:5
In Ground floor
In First floor
In Second floor
Manufacturing, supplying and fixing in position of RCC jally of 50mm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing, curing, lifting, fixing in position etc., complete complying with standard specification and as directed
Plastering with cement mortar 1:5 mix, 12mm thick - 1 m2
Special Ceiling Plastering for RC slabs and beams with cement mortar 1:3 mix 10mm thick including hacking etc., complete 10 m2
Renewing the broken glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the Departmental Officer
Plain Glass 4 mm thick
Providing Granolithic floor finish 25mm thick with PCC 1:2:4 (One cement two sand and four aggregate) using 10 to 12mm thick HGB jelly and river sand and including rubbing the top surface smoothly thread lining if found necessary and curing etc., complete complying with standard specification and as directed by the Departmental officer. TNBP No. 31
For 40 mm thick for, where heavy movement prevails.
Paving the flooring with best approved quality and Solar Reflective Ceramic Tiles of size over a base layer of cement mortar 1:3(One of Cement and three of sand) 20mm thick and pointing with same colour cement neatly etc., including the finishing the joints and appointing flush with even surfaces etc., as directed complying with standard specifications the tiles should be got approved by the Executive Engineer before use on work.
305mmx305mmx7mm thick
Re Painting old wood work with one coat of best synthetic enamel paint of approved quality, colour including ordinary scrapping and preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, finishing neatly etc., complete complying with standard specification and as directed by the Departmental Officer.
Two coat Thorough scraping for 10 m2
Painting the old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)
Two coat Thorough scraping for 10 m2
Re Painting the walls with Two coats with first class quality Plastic Emulsion paint ( Exterior) of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358
Supply and fixing PVC rain water down fall pipes of 110 mm dia size 4 Kg/cm2 with necessary shoes, specials, clamps, bends, cowl, screws, nails, teakwood block, etc., complete complying with standard specification and as directed by the Departmental officers.
Rate for 1 RM/ Two floors
Fabricating and supplying and erecting the required number of trusses with structural steel members like angle iron MS plates for all truss members including cleats to receive the purlines all cutting drilling holes welding and fixing of members with necessary bolts nuts anchor bolt of approved quality hoisitn aligning and glazing the trusses inposition as per plan. The rate should include the cost painting the members with one coat of red oxide primer and zinc chromate etc., complete complying with standard specification and an directed bya the departmental officers.
Manufacturing and supplying and fixing in position of 'N' type ventilators of required size made out of 25x25x5mm MS "L" angles frames alround the ventilator. MS TEE of 25x25x5 mm to be fixed in between the frames at 30 cm intervals. Hold fast to be used 25x25x5 mm "L" angle 23 cm length 4 Nos. 3 mm pin headed glass to be fixed in-between the angles by using Teak wood beadings of size 15x12 mm with screw, washer and nut wherever necessary. In the inclined portion, 1"x1" weld mesh to be embedded by using 25x5 mm Flat at 30 cm centre to centre. 12 mm sq. steel rods to be fixed horizontally between the frames in vertical portions at 10 cm centre to centre (approximately). The rate inclusive of transporting charge, dismantling, redoing to the original condition, one coat of red oxide primer etc., complete complying with standard specification and as directed by the departmental officers.
Pre-painted galvanized iron fixed louvered ventilators with glass and grill:
Fabrication, supply and fixing in position of Single leaf steel door of required size using steel sections confirming to IS 7452/1982. The door made out of 40x40x6mm MS "L" angles for outer frames three sides. For Door shutter 35x35x6mm MS "L" angles for outer frames alround the shutter. For intermidiate stifner using "T" bars of size 20x20x3 mm -4 Nos horizontallywith equal intervals in the shutter portion. Panels to be covered with 20 gauge MS sheets. Hold fast 4 Nos wqith 35x35x6 mm L angle 23 cm length. Hinches of size 125x30 mm - 3 Nos, Tower bolt 300 mm long 2 Nos, Aldrop 300 mm long -1 No, "D" Type MS handle 200 mm long are to be fixed. The rate inclusive of all taxes, conveyence, dismantling and re doing to the original condition whereever necessary, one coat of redoxide primer etc., complete and complying with standard specification and as directed by the departmental officer.
Fabrication, supply and fixing in position of Steel window with MS sheet of required size using steel sections confirming to IS 7452/1982. The window outer frame made out of 40x40x6mm MS "L" angles for outer frames all sides and 40x40x6 mm "T" bars for vertical intermidiate section with not exceeding 50 cm centre to centre. For Window shutter 35x35x6mm MS "L" angles for outer frames alround the shutter. For intermidiate stifner using "T" bars of size 20x20x3 mm horizontally in each shutter portion. Panels to be covered with 20 gauge MS sheets. For cross brazing 25x5 mm MS Flat to be fixed for stifner. Hold fast 4 Nos with 35x35x6 mm L angle 23 cm length. MS Square rods 12 mm tk to be welded in the inner faces of the window at equal intervels not exceeding 10 cm centre to centre. Best quality of Butt Hinches of size 125x30 mm - 6 Nos with nylon washers and required screws, Tower bolt 300 mm long 3 Nos, Aldrop 200 mm long -1 No, "D" Type MS handle 150 mm long 3 Nos are to be fixed. The rate inclusive of all taxes, conveyence, dismantling and re doing to the original condition whereever necessary, one coat of redoxide primer etc., complete and complying with standard specification and as directed by the departmental officer. ( Observed Data )
Supplying and laying of Galvolume sheet 0.47 mm thick of approved quality for roofing with necessary U or J bolts and unts bitumen GI washers etc., complete complying with standard specification. ( Observed Data )
Supplying and laying of Gal volume sheet ridge pieces approved quality with necessary U or J bolts and nuts GI washers etc., complete complying with standard specification.
Electrical Work
Wiring with 2x 1.5 sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitablePVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / Fan point (For Electronic regulator) (SD 16)
Supply and Run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable heavy gauge M.S. coundit pipe on wall and ceiling with continous earth wire connection of 14 SWG TC wire with painting of suitable colour. (SD 44)
Supply and run of 4 x 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains (SD 68)
Supply and run of 1 of No.8 SWG GI wire for earth connection. (SD 74)
Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor, with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with tube (SD 89)
Supply and fixing of 1200 mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod with fan clamp with side plates and cross arm of size 450 mm (18") (SD 106)
Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box (SD 133)
Supply and fixing of 5A/15 A 3 Pin combined flush type wall socket with 15A flush type switch concealed in suitable MS Box flush with wall with painting (SD 137)
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board with Double door(Metal) 1No 32 Amps DP MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Standard make) (SD 167)
Supply and laying of 4 X 10 Sq.mm PVC ARMOURED LTUG CABLE in a trench to be excavated at a depth of 0.75 metreputting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (SD 202)
Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD 233)
KSP Construction
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .