REPAIRS WOODEN FURNITURE ARTICLES INCLUDING POLISHING AND RECANNING AND REPAIRS PAINTING TO STEEL ARTICLE AT ATS BELAGVI UNDER GE AF SAMBRA

Amount

Repairing the chair dining made out of 1st class Hardwood (Teak /Sissoo) best quality including replacing the following unserviceable parts after dismantling the chair as required and reassembling complete including polishing the replaced part of the furniture complete all as directed :- FD-228/279

Front Leg

Rear Leg

Side rail / Front rail and rear rail of seat Frame

Back Rest

Stiffener

Repairing the chair Easy made out of 1st class Hardwood (Teak /Sissoo) beast quality including replacing the following unserviceable parts after dismantling the chair as required and reassembling complete including polishing the replaced part of the furniture complete all as directed:- FD-229

Front Leg

Rear Leg

Front / back /Side rails

Top bottom and side rails of Back Frame

Repairing the chair writing made out of 1st class Hardwood (Teak /Sissoo) beast quality including replacing the following unserviceable parts after dismantling the chair as required and reassembling complete including polishing the replaced part of the furniture complete all as directed :- FD-280

Front Leg

Rear Leg

Side rails / Front rails / Rear rails of seat Frame

Back Rest

Recanning to chairs wooden all types, stool dressing CB and chair CBA special with hand rest squire type etc with best quality cane not less than 1.8 mm wide slightly round (Godrej pattern) and 0.40 mm thickness of white colour. Including old damaged. FD-56,FD-280,FD-229, FD228/279, FD -120

Dismantling the existing unserviceable wheels/ bushings assembly of the computer tables supply and fix suitable PVC bushing wheel assembly all as directed. FD/E6/MAP/03

M & L repairing the unserviceable chair revolving Godrej pattern including supply and replacing the unserviceable swivel movement bearing, hydraulic seal, spring, ball wheel set (all three) complete including greasing and servicing etc all as directed. 5002T.PCH-7031

M & L repairing the unserviceable chair revolving Godrej pattern including supply and replacing the unserviceable swivel movement bearing, hydraulic seal, spring, ball wheel set (all five) and base frame complete including greasing and servicing etc all as directed. FD/E6/MAP/01

Removing the existing unserviceable seat and back from chair revolving godrej and S& F new seat and back godrej pattern as per drg and sepcification. FD/E6/MAP/01

Removing the existing unserviceable top from table computer godrej and S& F new table top of prelaminated particle board extrier grade 18/19mm thick as per drg and sepcification. FD/E6/MAP/01

Removing the existing unserviceable cushion of 40mm thick, 40 density and supply and fixing suitably with same high quality cushion for chair seat and back all as directed. 5002T.PCH-7031

Removing the existing unserviceable Tapesty cloth Air force colour and supply cut and stich into required shape/size apesty cloth Air force colour high quality of same shade and fixing to chair seat/bottom all as directed. 5002T.PCH-7031

Removing the following old unserviceable parts of Sofa set three seaters/single seater and S&F new components of first class teak wood including polishing the replaced component all as per drg and specification :- FD-281

Leg of sofa chairs (3+1+1 seater) size 70x35mm

Arms rest of sofa chair (3+1+1 seater) size 35x70mm

Wooden rail to support back frame (3+1+1 seater) size 30x50mm

Wooden bearers for sofa set (single seater) 40x40mm

Wooden top rails for sofa set (three seater) size 35 x100mm

Wooden battens for sofa set (3+1+1 seater) size 50x20mm

Supply and fix sofa set cushion of size 535x500mm 100mm thich of 40 density including suitable cover good quality tapestry cloth rate not less than Rs 250 over malmal cloth all as directed. FD-281

Removing old unserviceable head rest of bed ply wood top and S & F new head rest exterior grade and fixed as per drg. FD-246

All as per item No 14 here in befpre but foot rest of bed ply wood top and S & F new foot rest exterior grade and fixed as per drg. FD-246

Removing old unserviceable long rail as per drg first class HW (Teak wood) and S & F new long rail and fixed as per drg. FD-246

All as per item No 3 here in above but short rail size as per drg and S & F new short rail and fixed as per drg. FD-246

Removing old unserviceable ply wood of bed ply wood top and S & F new ply wood 6’ x 3’ and 12 mm thickness and fixed as per drg. (Make: Kit ply / Archid Ply). FD-246

M&L for MS clamps of size 25 x 3 mm thick 150 mm long made to ‘L’ shape and screwed to legs and frame including 02 coats of synthetic enamel paint over a red oxide primer. FD-246

Dismantling / removing the old unserviceable MS tube support frame from DESK class room and other furniture items, supply and fix 25mm dia 1.6 mm thick MS tube cut into size and fixing the same by means of gas welding all as directed including painting with two coats of synthetic enamel paint over a coat of suitable primer all a directed. FD-107

Dismantling/removing the old unserviceable bottom plank, supply and fix new plank made out of first class hard wood (Teak Wood) cut and made into size of 255x1220 of 25mm thick and fixing in foam with/with out back class room by means of and including suitable bolt nuts including polishing the replaced plank all as directed and specified in the drawing. FD-77, FD-78(M), F-2

Dismantling / removing the old unserviceable back plank, supply and fix new plank made out of first class hard wood (Teak wood) cut and made into size of 150x1220 of 19mm thick and fixing in foam with back class room by polishing the replaced plank all as directed and slecified in the drawing. FD-78 (M) F-2

Dismantling/removing the old unserviceable top/bottom support cover, S & F new top/ bottom support cover made out of prelaminated particle board extierier grade of 19mm thick one side teak wood finish and other side white lamination cut and made into size of 550x1220 including 6mm thick teak wood beading ( Edging) and fixing in desk class room including polishing the teak wood part and painting the MS frame with two coat of S/E paint over the painted suface after carrying out poper preparation work all as directed. FD-107

All same as item Ser No 12 above but for side cover and center support of size 550x200x100x19mm thick all as directed except painted. FD-107

Supply and replace hard rubber /PVC bush 32mm size to the legs of the furniture such as desk. Foam with & with back. FD-78/107

Dismantling / removing the old unserviceable mirror supply and fix new mirror of suitable size 5mm thick for ladies dressing table all as directed. FD-378

Dismantling / removing the old unserviceable mirror supply and fix new mirror of suitable size 5mm thick for gents dressing table all as directed. FD-372

Polishing to wooden furniture, all unevenness shall be rubbed down to smoothness with suitable sand paper and the surface shall be well dusted, the pores in the surface of the wooden parts of the furniture shall be filled with a filler made of paste of in water of mathylated spirit wit a suitable pigment like burnt sienna, polishing to the prepared wooden surface with two coat of French polish of high glossy finish of the following items of furniture. ( The make of the polish shall be of SHALIMAR / NEROLAC)

Table dressing ladies FD-257

Almirah mediun 1/2 S 1/2 H Shelves wooden DB-4116

Table conference FD-8(M)

Stool dressing Cushioned FD-27M, FD/E6/MAP/14

Table peg FD-384

Table office clerk wooden DB-4920

Rack side four spaces wooden DB-4123

Side board FD-241

Table typist wooden DB-4122

Teapoy FD-278

Table office Officer wooden DB-4119

Table 600x600 x 760 mm FD-95(M)

Table 3'x2' with out drawer FD-231

Sofa set 5 seater FD-281

Chair dining FD-279

Chair easy FD-229

Chair writing FD-280

Table center FD-274

Table dressing gents FD-379,FD/E6/MAP/16

Board noties 1830x1230 mm FD-99(M)

Sofa Chair FD-281/373

Book case FD FD-232

Chair dining map FD/MAP/11/04

Chair dining long back FD-357

Chair easy cushioned FD-358

Table dining 6 persons FD-273

Table dining 8 persons FD-273

Bench work shop typa 'A' F-42

Couch Examination FD-122M

Table writing FD-275

Bed ply wood top FD-246

Hard stand with mirror FD-361

Table bed side FD-276

Sofa set 4 seater FD-281

Trestle store room wooden FD-4292

Table 6'X3' FD-37

Polishing to wooden furniture, all unevenness shall be rubbed down to smoothness with suitable motorized grinder / sand paper and the surface shall be well dusted, the pores in the surface of the wooden parts of the furniture shall be filled with a filler made of paste of in water of mathylated spirit with a suitable pigment like burnt sienna, polishing to the prepared wooden surface with two coat of French polish of high glossy finish, and painting the metal parts of the furniture such as bottom frame, legs etc made out of MS square / pipe after cleaning and preparing the surface all as directed for the following items of furniture. ( The make of the polish shall be of SHALIMAR / NEROLAC)

Desk in first class hard wood FD-107

Foam w/o back F-7

Foam with back 1200 mm F-2, F78(M)

Form with back 1900mm FD-20

M&L for locking device consisting base plate made out of 12 gauge MS sheet and Lever plate made out of 16 gauge MS sheet to the required length, 'D' shape, suitable for almirah large/medium steel including taking down of old locking device. FD-1031,1032

M&L for 8 mm dia round bar type locking device suitable size and shape for almirah large steel including painting with two coat of synethetic enamel paint over a coat of primer to new surface and taking down old box. FD-1031

M&L for 8 mm dia round bar type locking device suitable size and shape for almirah medium steel including painting with two coat of synethetic enamel paint over a coat of primer to new surface and taking down old box. FD-1032

S&F Godrej Lock 6 Lever with two keys suitable for almirah Large/Medium steel including taking down of old lock FD-1031,1032

S&F Godrej Lock 6 Lever with two keys suitable for table steel all types including taking down of old lock FD-1003,1004,1005

S&F Chromium plated MS handle 125mm Long Godrej brand suitable for almirah Large/medium steel including taking down old handle FD-1031,1032

S&F Shelving clips / supports MS made out of 10 gauge sheet with required number of screw suitable size for almirah large/medium including taking down of old shelving clips. FD-1031,1032

S&F Lock cover outers Godrej pattern made out of 10 gauge MS sheet to the required size and shape for almirah Large/medium steel including taking down of old lock cover. FD-1031,1032

S&F Safety type Hasp & staples of MS chromium plated size 75 x 40x3mm for Locker bed side steel including taking down of old Hasp & staples. FD-1029

S&F 2 mm thick steel chromium plated steel Handle 100 mm Long and S/F to steel Locker bed side including taking down of old handle. FD-1029

S&F 15 mmthick x380mm long tubler pipe duly welded with Tee brackets in side the bed side locker complete all as specified and as directed. FD-1029

Supply and fixing steel sheleves for alimrah large steel with necessary clips, screw etc, including two coats of synthetic enamel paint over a coat red oxide primer and takeing down old unsericeable shelves complete all as specified and as directed FD-1031,1034

Supply and fixing steel sheleves for alimrah medium steel with necessary clips, screw etc, including two coats of synthetic enamel paint over a coat red oxide primer and takeing down old unsericeable shelves complete all as specified and as directed FD-1032

Removing down and providing spot welding/continuous welding where required for repairing Joints, door hinges, bottom legs corners and other minor repairs like fixing of sheet etc for almirah Large/Med and Locker Bed side, tables etc. FD-1003,1004,1029,1031,1032

M&L for preparation of existing painted steel surface. The surfaces shall be thoroughly cleaned of dirt, fluxing material and scrapped with hand scraper followed by wire brushing or by blow lamp and finally sand papering the surface to remove all scales and rust. The surface shall then be wiped finally with mineral turpentine to remove oil, grease etc. If any dents and scratches shall be filled with using a good metal putty knife pressing and apply two coats of synthetic enamel paint over green/phirozi blue / black as required shade card of Asian/Nerolac/burger/ shalimar paint colour (spray painting ) for the following :-

Almirah large steel with selves FD-1031

Almirah large steel 1/2 H 1/2 SH FD-1034

Almirah medium steel with selves FD-1032

Almirah medium steel 1/2 H 1/2 SH FD-114(M)

Locker bedside steel FD-1029

Shoe Rack Steel FD/E6/MAP/02

Book Shelf open small Steel TP

Book Shelf open large Steel FD-69(M)

Trestle store room steel FD-1043

Wardrobe steel 24" with drawers TP

Applying 02 coats of synthetic enamel paint over green colours ( spray painting to steel parts of table office officers /clerks including scrubbing down in rusted steel surface and giving one coat of red oxide primer to rusted surface , after carrying out sheet metal repair works such as removing dents, minor welding works, applying metal paste / putty etc.for table :-

Table office officers steel FD-1003

Table office clerks steel FD-1004

Table typist steel FD-1005

Table steel 3'X3' FD-1009

Recanning of chair veranda with not less than 4 mm wide slightly round white plastic cane including painting the chair with one coat of white enamel paint after preperation o f old surface all as directed Drg No FD -19(M)

PVC bush fixed with screw and washer suitable for chair Drg No 19 (M)

Removing and provding spot welding/ continous welding where ever required for repairing joints, broken MS conduit pipe of frame of chair tubular steel / chair varanda Drg No FD-19 (M)

Dismantling / removing old unserviceable hand rest for Chair CBA special with hand rest Squire type and S&F new hand rest of size 19x600x300mm made out of prelaminated particle board "L" shape with PVC beading around the particle board and MS Tubular pipe of size 700x15mm "L" shape with clam screw and along with necessary welding squire type pipe and painting with two coats of synethic enamel paint surfac after carrying out proper preperation work all as directed Drg No FD-260

Removing old unserviceable ply wood of charpoy folding IP hard ply wood top and S & F new ply wood 6’ x 3’ and 12 mm thickness and fixed as per drg. (Make: Kit ply / Archid ply). FD-388 (R)

Removing old unserviceable ply wood of bed hard and S & F new ply wood 7’ x 3’ and 12 mm thickness and fixed as per drg. (Make: Kit ply / Archid ply). FD/E6/MAP/08 (R)

Mahesh Traders

KASTURILAL HARICHAND OHRI AND SONS

REENA INDUSTRIES